powerpc/fsl-pci: Unify pci/pcie initialization code

We unified the Freescale pci/pcie initialization by changing the fsl_pci
to a platform driver. In previous PCI code architecture the initialization
routine is called at board_setup_arch stage. Now the initialization is done
in probe function which is architectural better. Also It's convenient for
adding PM support for PCI controller in later patch.

Now we registered pci controllers as platform devices. So we combine two
initialization code as one platform driver.
Signed-off-by: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/platforms/85xx/common.c

@@ -27,6 +27,16 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = {
 	{ .compatible = "fsl,mpc8548-guts", },
 	/* Probably unnecessary? */
 	{ .compatible = "gpio-leds", },
+	/* For all PCI controllers */
+	{ .compatible = "fsl,mpc8540-pci", },
+	{ .compatible = "fsl,mpc8548-pcie", },
+	{ .compatible = "fsl,p1022-pcie", },
+	{ .compatible = "fsl,p1010-pcie", },
+	{ .compatible = "fsl,p1023-pcie", },
+	{ .compatible = "fsl,p4080-pcie", },
+	{ .compatible = "fsl,qoriq-pcie-v2.4", },
+	{ .compatible = "fsl,qoriq-pcie-v2.3", },
+	{ .compatible = "fsl,qoriq-pcie-v2.2", },
 	{},
 };
 

arch/powerpc/platforms/85xx/corenet_ds.c

@@ -16,7 +16,6 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -52,39 +51,16 @@ void __init corenet_ds_pic_init(void)
  */
 void __init corenet_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,p4080-pcie") ||
-		    of_device_is_compatible(np, "fsl,qoriq-pcie-v2.2") ||
-		    of_device_is_compatible(np, "fsl,qoriq-pcie-v2.3") ||
-		    of_device_is_compatible(np, "fsl,qoriq-pcie-v2.4")) {
-			fsl_add_bridge(np, 0);
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PCI) && defined(CONFIG_PPC64)
 	pci_devs_phb_init();
 #endif
-#endif
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
+
 	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
 }
 

arch/powerpc/platforms/85xx/ge_imp3a.c

@@ -22,7 +22,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -84,53 +83,39 @@ void __init ge_imp3a_pic_init(void)
 	of_node_put(cascade_node);
 }
 
-#ifdef CONFIG_PCI
-static int primary_phb_addr;
-#endif	/* CONFIG_PCI */
-
-/*
- * Setup the architecture
- */
-static void __init ge_imp3a_setup_arch(void)
+static void ge_imp3a_pci_assign_primary(void)
 {
-	struct device_node *regs;
 #ifdef CONFIG_PCI
 	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
-	if (ppc_md.progress)
-		ppc_md.progress("ge_imp3a_setup_arch()", 0);
+	struct resource rsrc;
 
-#ifdef CONFIG_PCI
 	for_each_node_by_type(np, "pci") {
 		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
 		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
 		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
-			struct resource rsrc;
 			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
+			if ((rsrc.start & 0xfffff) == 0x9000)
+				fsl_pci_primary = np;
 		}
 	}
 #endif
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init ge_imp3a_setup_arch(void)
+{
+	struct device_node *regs;
+
+	if (ppc_md.progress)
+		ppc_md.progress("ge_imp3a_setup_arch()", 0);
 
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	ge_imp3a_pci_assign_primary();
+
+	swiotlb_detect_4g();
 
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
@@ -215,17 +200,10 @@ static int __init ge_imp3a_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "ge,IMP3A")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x9000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return of_flat_dt_is_compatible(root, "ge,IMP3A");
 }
 
-machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices);
+machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
 

arch/powerpc/platforms/85xx/mpc8536_ds.c

@@ -17,7 +17,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -46,46 +45,17 @@ void __init mpc8536_ds_pic_init(void)
  */
 static void __init mpc8536_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc8536_ds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-
-#endif
+	fsl_pci_assign_primary();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	swiotlb_detect_4g();
 
 	printk("MPC8536 DS board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier);
 

arch/powerpc/platforms/85xx/mpc85xx_ads.c

@@ -137,10 +137,6 @@ static void __init init_ioports(void)
 
 static void __init mpc85xx_ads_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
 
@@ -150,11 +146,10 @@ static void __init mpc85xx_ads_setup_arch(void)
 #endif
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
+
+	fsl_pci_assign_primary();
 }
 
 static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
@@ -173,7 +168,7 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/mpc85xx_cds.c

@@ -276,6 +276,33 @@ machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
 
 #endif /* CONFIG_PPC_I8259 */
 
+static void mpc85xx_cds_pci_assign_primary(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+
+	if (fsl_pci_primary)
+		return;
+
+	/*
+	 * MPC85xx_CDS has ISA bridge but unfortunately there is no
+	 * isa node in device tree. We now looking for i8259 node as
+	 * a workaround for such a broken device tree. This routine
+	 * is for complying to all device trees.
+	 */
+	np = of_find_node_by_name(NULL, "i8259");
+	while ((fsl_pci_primary = of_get_parent(np))) {
+		of_node_put(np);
+		np = fsl_pci_primary;
+
+		if ((of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) &&
+		    of_device_is_available(np))
+			return;
+	}
+#endif
+}
+
 /*
  * Setup the architecture
  */
@@ -309,21 +336,12 @@ static void __init mpc85xx_cds_setup_arch(void)
 	}
 
 #ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-	}
-
 	ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
+
+	mpc85xx_cds_pci_assign_primary();
+	fsl_pci_assign_primary();
 }
 
 static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
@@ -355,7 +373,7 @@ static int __init mpc85xx_cds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxCDS");
 }
 
-machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
 
 define_machine(mpc85xx_cds) {
 	.name		= "MPC85xx CDS",

arch/powerpc/platforms/85xx/mpc85xx_ds.c

@@ -20,7 +20,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -129,13 +128,11 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 }
 #endif	/* CONFIG_PCI */
 
-static void __init mpc85xx_ds_pci_init(void)
+static void __init mpc85xx_ds_uli_init(void)
 {
 #ifdef CONFIG_PCI
 	struct device_node *node;
 
-	fsl_pci_init();
-
 	/* See if we have a ULI under the primary */
 
 	node = of_find_node_by_name(NULL, "uli1575");
@@ -160,7 +157,8 @@ static void __init mpc85xx_ds_setup_arch(void)
 		ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
 
 	swiotlb_detect_4g();
-	mpc85xx_ds_pci_init();
+	fsl_pci_assign_primary();
+	mpc85xx_ds_uli_init();
 	mpc85xx_smp_init();
 
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
@@ -176,9 +174,9 @@ static int __init mpc8544_ds_probe(void)
 	return !!of_flat_dt_is_compatible(root, "MPC8544DS");
 }
 
-machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
-machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
-machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p2020_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -327,44 +327,16 @@ static void __init mpc85xx_mds_qeic_init(void) { }
 
 static void __init mpc85xx_mds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct pci_controller *hose;
-	struct device_node *np;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-#endif
-
 	mpc85xx_smp_init();
 
 	mpc85xx_mds_qe_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 }
 
 
@@ -409,9 +381,9 @@ static int __init mpc85xx_publish_devices(void)
 	return mpc85xx_common_publish_devices();
 }
 
-machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
-machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
-machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices);
+machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices);
+machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/mpc85xx_rdb.c

@@ -86,23 +86,17 @@ void __init mpc85xx_rdb_pic_init(void)
  */
 static void __init mpc85xx_rdb_setup_arch(void)
 {
-#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
+#ifdef CONFIG_QUICC_ENGINE
 	struct device_node *np;
 #endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8548-pcie"))
-			fsl_add_bridge(np, 0);
-	}
-
-#endif
-
 	mpc85xx_smp_init();
 
+	fsl_pci_assign_primary();
+
 #ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np) {
@@ -161,15 +155,15 @@ static void __init mpc85xx_rdb_setup_arch(void)
 	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
-machine_device_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
-machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p2020_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1024_rdb, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/p1010rdb.c

@@ -46,25 +46,15 @@ void __init p1010_rdb_pic_init(void)
  */
 static void __init p1010_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("p1010_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,p1010-pcie"))
-			fsl_add_bridge(np, 0);
-	}
-
-#endif
+	fsl_pci_assign_primary();
 
 	printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1010_rdb, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);
 
 /*

arch/powerpc/platforms/85xx/p1022_ds.c

@@ -18,7 +18,6 @@
 
 #include <linux/pci.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 #include <asm/div64.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
@@ -507,32 +506,9 @@ early_param("video", early_video_setup);
  */
 static void __init p1022_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("p1022_ds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
-		struct resource rsrc;
-		struct pci_controller *hose;
-
-		of_address_to_resource(np, 0, &rsrc);
-
-		if ((rsrc.start & 0xfffff) == 0x8000)
-			fsl_add_bridge(np, 1);
-		else
-			fsl_add_bridge(np, 0);
-
-		hose = pci_find_hose_for_OF_device(np);
-		max = min(max, hose->dma_window_base_cur +
-			  hose->dma_window_size);
-	}
-#endif
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 	diu_ops.get_pixel_format	= p1022ds_get_pixel_format;
 	diu_ops.set_gamma_table		= p1022ds_set_gamma_table;
@@ -601,18 +577,14 @@ static void __init p1022_ds_setup_arch(void)
 
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 
 	pr_info("Freescale P1022 DS reference board\n");
 }
 
-machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1022_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
 

arch/powerpc/platforms/85xx/p1022_rdk.c

@@ -14,7 +14,6 @@
 
 #include <linux/pci.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 #include <asm/div64.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
@@ -121,32 +120,9 @@ void __init p1022_rdk_pic_init(void)
  */
 static void __init p1022_rdk_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("p1022_rdk_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
-		struct resource rsrc;
-		struct pci_controller *hose;
-
-		of_address_to_resource(np, 0, &rsrc);
-
-		if ((rsrc.start & 0xfffff) == 0x8000)
-			fsl_add_bridge(np, 1);
-		else
-			fsl_add_bridge(np, 0);
-
-		hose = pci_find_hose_for_OF_device(np);
-		max = min(max, hose->dma_window_base_cur +
-			  hose->dma_window_size);
-	}
-#endif
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 	diu_ops.set_monitor_port	= p1022rdk_set_monitor_port;
 	diu_ops.set_pixel_clock		= p1022rdk_set_pixel_clock;
@@ -155,18 +131,14 @@ static void __init p1022_rdk_setup_arch(void)
 
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 
 	pr_info("Freescale / iVeia P1022 RDK reference board\n");
 }
 
-machine_device_initcall(p1022_rdk, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1022_rdk, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(p1022_rdk, swiotlb_setup_bus_notifier);
 

arch/powerpc/platforms/85xx/p1023_rds.c

@@ -80,15 +80,12 @@ static void __init mpc85xx_rds_setup_arch(void)
 		}
 	}
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,p1023-pcie")
-		fsl_add_bridge(np, 0);
-#endif
-
 	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
 }
 
-machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
 
 static void __init mpc85xx_rds_pic_init(void)
 {

arch/powerpc/platforms/85xx/p2041_rdb.c

@@ -80,7 +80,7 @@ define_machine(p2041_rdb) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p2041_rdb, corenet_ds_publish_devices);
+machine_arch_initcall(p2041_rdb, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/p3041_ds.c

@@ -82,7 +82,7 @@ define_machine(p3041_ds) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p3041_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p3041_ds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/p4080_ds.c

@@ -81,7 +81,7 @@ define_machine(p4080_ds) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p4080_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p4080_ds, corenet_ds_publish_devices);
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier);
 #endif

arch/powerpc/platforms/85xx/p5020_ds.c

@@ -91,7 +91,7 @@ define_machine(p5020_ds) {
 #endif
 };
 
-machine_device_initcall(p5020_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p5020_ds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p5020_ds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/p5040_ds.c

@@ -82,7 +82,7 @@ define_machine(p5040_ds) {
 #endif
 };
 
-machine_device_initcall(p5040_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p5040_ds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p5040_ds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/qemu_e500.c

@@ -41,7 +41,7 @@ static void __init qemu_e500_setup_arch(void)
 {
 	ppc_md.progress("qemu_e500_setup_arch()", 0);
 
-	fsl_pci_init();
+	fsl_pci_assign_primary();
 	swiotlb_detect_4g();
 	mpc85xx_smp_init();
 }
@@ -56,7 +56,7 @@ static int __init qemu_e500_probe(void)
 	return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500");
 }
 
-machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices);
+machine_arch_initcall(qemu_e500, mpc85xx_common_publish_devices);
 
 define_machine(qemu_e500) {
 	.name			= "QEMU e500",

arch/powerpc/platforms/85xx/sbc8548.c

@@ -88,26 +88,11 @@ static int __init sbc8548_hw_rev(void)
  */
 static void __init sbc8548_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("sbc8548_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-	}
-#endif
+	fsl_pci_assign_primary();
+
 	sbc_rev = sbc8548_hw_rev();
 }
 
@@ -128,7 +113,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-machine_device_initcall(sbc8548, mpc85xx_common_publish_devices);
+machine_arch_initcall(sbc8548, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/socrates.c

@@ -66,20 +66,13 @@ static void __init socrates_pic_init(void)
  */
 static void __init socrates_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("socrates_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-#endif
+	fsl_pci_assign_primary();
 }
 
-machine_device_initcall(socrates, mpc85xx_common_publish_devices);
+machine_arch_initcall(socrates, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/stx_gp3.c

@@ -60,21 +60,14 @@ static void __init stx_gp3_pic_init(void)
  */
 static void __init stx_gp3_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("stx_gp3_setup_arch()", 0);
 
+	fsl_pci_assign_primary();
+
 #ifdef CONFIG_CPM2
 	cpm2_reset();
 #endif
-
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-#endif
 }
 
 static void stx_gp3_show_cpuinfo(struct seq_file *m)
@@ -93,7 +86,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices);
+machine_arch_initcall(stx_gp3, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/tqm85xx.c

@@ -59,10 +59,6 @@ static void __init tqm85xx_pic_init(void)
  */
 static void __init tqm85xx_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("tqm85xx_setup_arch()", 0);
 
@@ -70,20 +66,7 @@ static void __init tqm85xx_setup_arch(void)
 	cpm2_reset();
 #endif
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			if (!of_address_to_resource(np, 0, &rsrc)) {
-				if ((rsrc.start & 0xfffff) == 0x8000)
-					fsl_add_bridge(np, 1);
-				else
-					fsl_add_bridge(np, 0);
-			}
-		}
-	}
-#endif
+	fsl_pci_assign_primary();
 }
 
 static void tqm85xx_show_cpuinfo(struct seq_file *m)
@@ -123,7 +106,7 @@ static void __devinit tqm85xx_ti1520_fixup(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
 		tqm85xx_ti1520_fixup);
 
-machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices);
+machine_arch_initcall(tqm85xx, mpc85xx_common_publish_devices);
 
 static const char *board[] __initdata = {
 	"tqc,tqm8540",

arch/powerpc/platforms/85xx/xes_mpc85xx.c

@@ -111,18 +111,11 @@ static void xes_mpc85xx_fixups(void)
 	}
 }
 
-#ifdef CONFIG_PCI
-static int primary_phb_addr;
-#endif
-
 /*
  * Setup the architecture
  */
 static void __init xes_mpc85xx_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
 	struct device_node *root;
 	const char *model = "Unknown";
 
@@ -137,26 +130,14 @@ static void __init xes_mpc85xx_setup_arch(void)
 
 	xes_mpc85xx_fixups();
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-	}
-#endif
-
 	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
 }
 
-machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
-machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
-machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -165,42 +146,21 @@ static int __init xes_mpc8572_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "xes,MPC8572")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x8000;
-#endif
-		return 1;
-	} else {
-		return 0;
-	}
+	return of_flat_dt_is_compatible(root, "xes,MPC8572");
 }
 
 static int __init xes_mpc8548_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "xes,MPC8548")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0xb000;
-#endif
-		return 1;
-	} else {
-		return 0;
-	}
+	return of_flat_dt_is_compatible(root, "xes,MPC8548");
 }
 
 static int __init xes_mpc8540_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "xes,MPC8540")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0xb000;
-#endif
-		return 1;
-	} else {
-		return 0;
-	}
+	return of_flat_dt_is_compatible(root, "xes,MPC8540");
 }
 
 define_machine(xes_mpc8572) {

arch/powerpc/platforms/86xx/gef_ppc9a.c

@@ -73,13 +73,6 @@ static void __init gef_ppc9a_init_irq(void)
 static void __init gef_ppc9a_setup_arch(void)
 {
 	struct device_node *regs;
-#ifdef CONFIG_PCI
-	struct device_node *np;
-
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		fsl_add_bridge(np, 1);
-	}
-#endif
 
 	printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
 
@@ -87,6 +80,8 @@ static void __init gef_ppc9a_setup_arch(void)
 	mpc86xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "gef,ppc9a-fpga-regs");
 	if (regs) {
@@ -221,6 +216,7 @@ static long __init mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -231,7 +227,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
+machine_arch_initcall(gef_ppc9a, declare_of_platform_devices);
 
 define_machine(gef_ppc9a) {
 	.name			= "GE PPC9A",

arch/powerpc/platforms/86xx/gef_sbc310.c

@@ -73,20 +73,14 @@ static void __init gef_sbc310_init_irq(void)
 static void __init gef_sbc310_setup_arch(void)
 {
 	struct device_node *regs;
-#ifdef CONFIG_PCI
-	struct device_node *np;
-
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		fsl_add_bridge(np, 1);
-	}
-#endif
-
 	printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
 	if (regs) {
@@ -209,6 +203,7 @@ static long __init mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -219,7 +214,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(gef_sbc310, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc310, declare_of_platform_devices);
 
 define_machine(gef_sbc310) {
 	.name			= "GE SBC310",

arch/powerpc/platforms/86xx/gef_sbc610.c

@@ -73,13 +73,6 @@ static void __init gef_sbc610_init_irq(void)
 static void __init gef_sbc610_setup_arch(void)
 {
 	struct device_node *regs;
-#ifdef CONFIG_PCI
-	struct device_node *np;
-
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		fsl_add_bridge(np, 1);
-	}
-#endif
 
 	printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
 
@@ -87,6 +80,8 @@ static void __init gef_sbc610_setup_arch(void)
 	mpc86xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
 	if (regs) {
@@ -198,6 +193,7 @@ static long __init mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -208,7 +204,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(gef_sbc610, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc610, declare_of_platform_devices);
 
 define_machine(gef_sbc610) {
 	.name			= "GE SBC610",

arch/powerpc/platforms/86xx/mpc8610_hpcd.c

@@ -91,6 +91,9 @@ static struct of_device_id __initdata mpc8610_ids[] = {
 	{ .compatible = "simple-bus", },
 	/* So that the DMA channel nodes can be probed individually: */
 	{ .compatible = "fsl,eloplus-dma", },
+	/* PCI controllers */
+	{ .compatible = "fsl,mpc8610-pci", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{}
 };
 
@@ -107,7 +110,7 @@ static int __init mpc8610_declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
+machine_arch_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
@@ -278,25 +281,13 @@ mpc8610hpcd_valid_monitor_port(enum fsl_diu_monitor_port port)
 static void __init mpc86xx_hpcd_setup_arch(void)
 {
 	struct resource r;
-	struct device_node *np;
 	unsigned char *pixis;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8610-pci")
-		    || of_device_is_compatible(np, "fsl,mpc8641-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0xa000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-        }
-#endif
+	fsl_pci_assign_primary();
+
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 	diu_ops.get_pixel_format	= mpc8610hpcd_get_pixel_format;
 	diu_ops.set_gamma_table		= mpc8610hpcd_set_gamma_table;

arch/powerpc/platforms/86xx/mpc86xx_hpcn.c

@@ -19,7 +19,6 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -51,15 +50,8 @@ extern int uli_exclude_device(struct pci_controller *hose,
 static int mpc86xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
 {
-	struct device_node* node;	
-	struct resource rsrc;
-
-	node = hose->dn;
-	of_address_to_resource(node, 0, &rsrc);
-
-	if ((rsrc.start & 0xfffff) == 0x8000) {
+	if (hose->dn == fsl_pci_primary)
 		return uli_exclude_device(hose, bus, devfn);
-	}
 
 	return PCIBIOS_SUCCESSFUL;
 }
@@ -69,30 +61,11 @@ static int mpc86xx_exclude_device(struct pci_controller *hose,
 static void __init
 mpc86xx_hpcn_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		struct resource rsrc;
-		of_address_to_resource(np, 0, &rsrc);
-		if ((rsrc.start & 0xfffff) == 0x8000)
-			fsl_add_bridge(np, 1);
-		else
-			fsl_add_bridge(np, 0);
-		hose = pci_find_hose_for_OF_device(np);
-		max = min(max, hose->dma_window_base_cur +
-			  hose->dma_window_size);
-	}
-
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
-
 #endif
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
@@ -101,13 +74,9 @@ mpc86xx_hpcn_setup_arch(void)
 	mpc86xx_smp_init();
 #endif
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 }
 
 
@@ -162,6 +131,7 @@ static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "fsl,srio", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -171,7 +141,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices);
+machine_arch_initcall(mpc86xx_hpcn, declare_of_platform_devices);
 machine_arch_initcall(mpc86xx_hpcn, swiotlb_setup_bus_notifier);
 
 define_machine(mpc86xx_hpcn) {

arch/powerpc/platforms/86xx/sbc8641d.c

@@ -38,23 +38,16 @@
 static void __init
 sbc8641_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("sbc8641_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie")
-		fsl_add_bridge(np, 0);
-#endif
-
 	printk("SBC8641 board from Wind River\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
 #endif
+
+	fsl_pci_assign_primary();
 }
 
 
@@ -102,6 +95,7 @@ mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -111,7 +105,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(sbc8641, declare_of_platform_devices);
+machine_arch_initcall(sbc8641, declare_of_platform_devices);
 
 define_machine(sbc8641) {
 	.name			= "SBC8641D",

arch/powerpc/sysdev/fsl_pci.c

@@ -828,54 +828,78 @@ static const struct of_device_id pci_ids[] = {
 
 struct device_node *fsl_pci_primary;
 
-void __devinit fsl_pci_init(void)
+void fsl_pci_assign_primary(void)
 {
-	int ret;
-	struct device_node *node;
-	struct pci_controller *hose;
-	dma_addr_t max = 0xffffffff;
+	struct device_node *np;
 
 	/* Callers can specify the primary bus using other means. */
-	if (!fsl_pci_primary) {
+	if (fsl_pci_primary)
+		return;
+
 	/* If a PCI host bridge contains an ISA node, it's primary. */
-		node = of_find_node_by_type(NULL, "isa");
-		while ((fsl_pci_primary = of_get_parent(node))) {
-			of_node_put(node);
-			node = fsl_pci_primary;
+	np = of_find_node_by_type(NULL, "isa");
+	while ((fsl_pci_primary = of_get_parent(np))) {
+		of_node_put(np);
+		np = fsl_pci_primary;
 
-			if (of_match_node(pci_ids, node))
-				break;
-		}
+		if (of_match_node(pci_ids, np) && of_device_is_available(np))
+			return;
 	}
 
-	node = NULL;
-	for_each_node_by_type(node, "pci") {
-		if (of_match_node(pci_ids, node)) {
 	/*
 	 * If there's no PCI host bridge with ISA, arbitrarily
 	 * designate one as primary.  This can go away once
 	 * various bugs with primary-less systems are fixed.
 	 */
-			if (!fsl_pci_primary)
-				fsl_pci_primary = node;
-
-			ret = fsl_add_bridge(node, fsl_pci_primary == node);
-			if (ret == 0) {
-				hose = pci_find_hose_for_OF_device(node);
-				max = min(max, hose->dma_window_base_cur +
-						hose->dma_window_size);
-			}
+	for_each_matching_node(np, pci_ids) {
+		if (of_device_is_available(np)) {
+			fsl_pci_primary = np;
+			of_node_put(np);
+			return;
 		}
 	}
+}
+
+static int __devinit fsl_pci_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *node;
+	struct pci_controller *hose;
+
+	node = pdev->dev.of_node;
+	ret = fsl_add_bridge(node, fsl_pci_primary == node);
 
 #ifdef CONFIG_SWIOTLB
+	if (ret == 0) {
+		hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
+
 		/*
 		 * if we couldn't map all of DRAM via the dma windows
 		 * we need SWIOTLB to handle buffers located outside of
 		 * dma capable memory region
 		 */
-	if (memblock_end_of_DRAM() - 1 > max)
+		if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur +
+				hose->dma_window_size)
 			ppc_swiotlb_enable = 1;
+	}
 #endif
+
+	mpc85xx_pci_err_probe(pdev);
+
+	return 0;
+}
+
+static struct platform_driver fsl_pci_driver = {
+	.driver = {
+		.name = "fsl-pci",
+		.of_match_table = pci_ids,
+	},
+	.probe = fsl_pci_probe,
+};
+
+static int __init fsl_pci_init(void)
+{
+	return platform_driver_register(&fsl_pci_driver);
 }
+arch_initcall(fsl_pci_init);
 #endif

arch/powerpc/sysdev/fsl_pci.h

@@ -98,10 +98,19 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose);
 
 extern struct device_node *fsl_pci_primary;
 
-#ifdef CONFIG_FSL_PCI
-void fsl_pci_init(void);
+#ifdef CONFIG_PCI
+void fsl_pci_assign_primary(void);
 #else
-static inline void fsl_pci_init(void) {}
+static inline void fsl_pci_assign_primary(void) {}
+#endif
+
+#ifdef CONFIG_EDAC_MPC85XX
+int mpc85xx_pci_err_probe(struct platform_device *op);
+#else
+static inline int mpc85xx_pci_err_probe(struct platform_device *op)
+{
+	return -ENOTSUPP;
+}
 #endif
 
 #endif /* __POWERPC_FSL_PCI_H */

drivers/edac/mpc85xx_edac.c

@@ -212,7 +212,7 @@ static irqreturn_t mpc85xx_pci_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __devinit mpc85xx_pci_err_probe(struct platform_device *op)
+int __devinit mpc85xx_pci_err_probe(struct platform_device *op)
 {
 	struct edac_pci_ctl_info *pci;
 	struct mpc85xx_pci_pdata *pdata;
@@ -226,6 +226,16 @@ static int __devinit mpc85xx_pci_err_probe(struct platform_device *op)
 	if (!pci)
 		return -ENOMEM;
 
+	/* make sure error reporting method is sane */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
 	pdata = pci->pvt_info;
 	pdata->name = "mpc85xx_pci_err";
 	pdata->irq = NO_IRQ;
@@ -315,6 +325,7 @@ static int __devinit mpc85xx_pci_err_probe(struct platform_device *op)
 	devres_release_group(&op->dev, mpc85xx_pci_err_probe);
 	return res;
 }
+EXPORT_SYMBOL(mpc85xx_pci_err_probe);
 
 static int mpc85xx_pci_err_remove(struct platform_device *op)
 {
@@ -338,27 +349,6 @@ static int mpc85xx_pci_err_remove(struct platform_device *op)
 	return 0;
 }
 
-static struct of_device_id mpc85xx_pci_err_of_match[] = {
-	{
-	 .compatible = "fsl,mpc8540-pcix",
-	 },
-	{
-	 .compatible = "fsl,mpc8540-pci",
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, mpc85xx_pci_err_of_match);
-
-static struct platform_driver mpc85xx_pci_err_driver = {
-	.probe = mpc85xx_pci_err_probe,
-	.remove = __devexit_p(mpc85xx_pci_err_remove),
-	.driver = {
-		.name = "mpc85xx_pci_err",
-		.owner = THIS_MODULE,
-		.of_match_table = mpc85xx_pci_err_of_match,
-	},
-};
-
 #endif				/* CONFIG_PCI */
 
 /**************************** L2 Err device ***************************/
@@ -1210,12 +1200,6 @@ static int __init mpc85xx_mc_init(void)
 	if (res)
 		printk(KERN_WARNING EDAC_MOD_STR "L2 fails to register\n");
 
-#ifdef CONFIG_PCI
-	res = platform_driver_register(&mpc85xx_pci_err_driver);
-	if (res)
-		printk(KERN_WARNING EDAC_MOD_STR "PCI fails to register\n");
-#endif
-
 #ifdef CONFIG_FSL_SOC_BOOKE
 	pvr = mfspr(SPRN_PVR);
 
@@ -1251,9 +1235,6 @@ static void __exit mpc85xx_mc_exit(void)
 	    (PVR_VER(pvr) == PVR_VER_E500V2)) {
 		on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0);
 	}
-#endif
-#ifdef CONFIG_PCI
-	platform_driver_unregister(&mpc85xx_pci_err_driver);
 #endif
 	platform_driver_unregister(&mpc85xx_l2_err_driver);
 	platform_driver_unregister(&mpc85xx_mc_err_driver);