Merge branch 'topic/dw' into for-linus

drivers/dma/dw/Kconfig

@@ -6,17 +6,12 @@ config DW_DMAC_CORE
 	tristate
 	select DMA_ENGINE
 
-config DW_DMAC_BIG_ENDIAN_IO
-	bool
-
 config DW_DMAC
 	tristate "Synopsys DesignWare AHB DMA platform driver"
 	select DW_DMAC_CORE
-	select DW_DMAC_BIG_ENDIAN_IO if AVR32
-	default y if CPU_AT32AP7000
 	help
 	  Support the Synopsys DesignWare AHB DMA controller. This
-	  can be integrated in chips such as the Atmel AT32ap7000.
+	  can be integrated in chips such as the Intel Cherrytrail.
 
 config DW_DMAC_PCI
 	tristate "Synopsys DesignWare AHB DMA PCI driver"

drivers/dma/dw/platform.c

@@ -306,8 +306,12 @@ static int dw_resume_early(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = clk_prepare_enable(chip->clk);
+	if (ret)
+		return ret;
 
-	clk_prepare_enable(chip->clk);
 	return dw_dma_enable(chip);
 }
 

drivers/dma/dw/regs.h

@@ -116,20 +116,6 @@ struct dw_dma_regs {
 	DW_REG(GLOBAL_CFG);
 };
 
-/*
- * Big endian I/O access when reading and writing to the DMA controller
- * registers.  This is needed on some platforms, like the Atmel AVR32
- * architecture.
- */
-
-#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-#define dma_readl_native ioread32be
-#define dma_writel_native iowrite32be
-#else
-#define dma_readl_native readl
-#define dma_writel_native writel
-#endif
-
 /* Bitfields in DW_PARAMS */
 #define DW_PARAMS_NR_CHAN	8		/* number of channels */
 #define DW_PARAMS_NR_MASTER	11		/* number of AHB masters */
@@ -280,7 +266,6 @@ struct dw_dma_chan {
 	unsigned long		flags;
 	struct list_head	active_list;
 	struct list_head	queue;
-	struct dw_cyclic_desc	*cdesc;
 
 	unsigned int		descs_allocated;
 
@@ -302,9 +287,9 @@ __dwc_regs(struct dw_dma_chan *dwc)
 }
 
 #define channel_readl(dwc, name) \
-	dma_readl_native(&(__dwc_regs(dwc)->name))
+	readl(&(__dwc_regs(dwc)->name))
 #define channel_writel(dwc, name, val) \
-	dma_writel_native((val), &(__dwc_regs(dwc)->name))
+	writel((val), &(__dwc_regs(dwc)->name))
 
 static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
 {
@@ -333,9 +318,9 @@ static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
 }
 
 #define dma_readl(dw, name) \
-	dma_readl_native(&(__dw_regs(dw)->name))
+	readl(&(__dw_regs(dw)->name))
 #define dma_writel(dw, name, val) \
-	dma_writel_native((val), &(__dw_regs(dw)->name))
+	writel((val), &(__dw_regs(dw)->name))
 
 #define idma32_readq(dw, name)				\
 	hi_lo_readq(&(__dw_regs(dw)->name))
@@ -352,43 +337,30 @@ static inline struct dw_dma *to_dw_dma(struct dma_device *ddev)
 	return container_of(ddev, struct dw_dma, dma);
 }
 
-#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-typedef __be32 __dw32;
-#else
-typedef __le32 __dw32;
-#endif
-
 /* LLI == Linked List Item; a.k.a. DMA block descriptor */
 struct dw_lli {
 	/* values that are not changed by hardware */
-	__dw32		sar;
-	__dw32		dar;
-	__dw32		llp;		/* chain to next lli */
-	__dw32		ctllo;
+	__le32		sar;
+	__le32		dar;
+	__le32		llp;		/* chain to next lli */
+	__le32		ctllo;
 	/* values that may get written back: */
-	__dw32		ctlhi;
+	__le32		ctlhi;
 	/* sstat and dstat can snapshot peripheral register state.
 	 * silicon config may discard either or both...
 	 */
-	__dw32		sstat;
-	__dw32		dstat;
+	__le32		sstat;
+	__le32		dstat;
 };
 
 struct dw_desc {
 	/* FIRST values the hardware uses */
 	struct dw_lli			lli;
 
-#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-#define lli_set(d, reg, v)		((d)->lli.reg |= cpu_to_be32(v))
-#define lli_clear(d, reg, v)		((d)->lli.reg &= ~cpu_to_be32(v))
-#define lli_read(d, reg)		be32_to_cpu((d)->lli.reg)
-#define lli_write(d, reg, v)		((d)->lli.reg = cpu_to_be32(v))
-#else
 #define lli_set(d, reg, v)		((d)->lli.reg |= cpu_to_le32(v))
 #define lli_clear(d, reg, v)		((d)->lli.reg &= ~cpu_to_le32(v))
 #define lli_read(d, reg)		le32_to_cpu((d)->lli.reg)
 #define lli_write(d, reg, v)		((d)->lli.reg = cpu_to_le32(v))
-#endif
 
 	/* THEN values for driver housekeeping */
 	struct list_head		desc_node;

include/linux/dma/dw.h

@@ -50,25 +50,4 @@ static inline int dw_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; }
 static inline int dw_dma_remove(struct dw_dma_chip *chip) { return 0; }
 #endif /* CONFIG_DW_DMAC_CORE */
 
-/* DMA API extensions */
-struct dw_desc;
-
-struct dw_cyclic_desc {
-	struct dw_desc	**desc;
-	unsigned long	periods;
-	void		(*period_callback)(void *param);
-	void		*period_callback_param;
-};
-
-struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan,
-		dma_addr_t buf_addr, size_t buf_len, size_t period_len,
-		enum dma_transfer_direction direction);
-void dw_dma_cyclic_free(struct dma_chan *chan);
-int dw_dma_cyclic_start(struct dma_chan *chan);
-void dw_dma_cyclic_stop(struct dma_chan *chan);
-
-dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan);
-
-dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan);
-
 #endif /* _DMA_DW_H */

sound/atmel/Kconfig

-menu "Atmel devices (AVR32 and AT91)"
-	depends on AVR32 || ARCH_AT91
-
-config SND_ATMEL_ABDAC
-	tristate "Atmel Audio Bitstream DAC (ABDAC) driver"
-	select SND_PCM
-	depends on DW_DMAC && AVR32
-	help
-	  ALSA sound driver for the Atmel Audio Bitstream DAC (ABDAC).
+menu "Atmel devices (AT91)"
+	depends on ARCH_AT91
 
 config SND_ATMEL_AC97C
 	tristate "Atmel AC97 Controller (AC97C) driver"
 	select SND_PCM
 	select SND_AC97_CODEC
-	depends on (DW_DMAC && AVR32) || ARCH_AT91
+	depends on ARCH_AT91
 	help
 	  ALSA sound driver for the Atmel AC97 controller.
 

sound/atmel/Makefile

-snd-atmel-abdac-objs		:= abdac.o
 snd-atmel-ac97c-objs		:= ac97c.o
 
-obj-$(CONFIG_SND_ATMEL_ABDAC)	+= snd-atmel-abdac.o
 obj-$(CONFIG_SND_ATMEL_AC97C)	+= snd-atmel-ac97c.o