HID: gembird: add new driver to fix Gembird JPD-DualForce 2

This gamepad advertise 5 absolute axis while 4 are actually used.
The second Z axis shows some garbage, so it has to be ignored by HID.
The first Z axis and the Rz one are actually Rx and Ry. Remap them.

We could also just remap and ignore the axis in .input_mapping(). I
went ahead with .report_fixup() first, so here it is.
Reported-by: Orivej Desh <orivej@gmx.fr>
Tested-by: Orivej Desh <orivej@gmx.fr>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/hid/Kconfig

@@ -251,6 +251,12 @@ config HID_EZKEY
 	---help---
 	Support for Ezkey BTC 8193 keyboard.
 
+config HID_GEMBIRD
+	tristate "Gembird Joypad"
+	depends on HID
+	---help---
+	Support for Gembird JPD-DualForce 2.
+
 config HID_HOLTEK
 	tristate "Holtek HID devices"
 	depends on USB_HID

drivers/hid/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_HID_EMS_FF)	+= hid-emsff.o
 obj-$(CONFIG_HID_ELECOM)	+= hid-elecom.o
 obj-$(CONFIG_HID_ELO)		+= hid-elo.o
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
+obj-$(CONFIG_HID_GEMBIRD)	+= hid-gembird.o
 obj-$(CONFIG_HID_GT683R)	+= hid-gt683r.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtek-kbd.o

drivers/hid/hid-core.c

@@ -1823,6 +1823,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GEMBIRD, USB_DEVICE_ID_GEMBIRD_JPD_DUALFORCE2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },

drivers/hid/hid-gembird.c

+/*
+ *  HID driver for Gembird Joypad, "PC Game Controller"
+ *
+ *  Copyright (c) 2015 Red Hat, Inc
+ *  Copyright (c) 2015 Benjamin Tissoires
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+#define GEMBIRD_START_FAULTY_RDESC	8
+
+static const __u8 gembird_jpd_faulty_rdesc[] = {
+	0x75, 0x08,			/*   Report Size (8)		*/
+	0x95, 0x05,			/*   Report Count (5)		*/
+	0x15, 0x00,			/*   Logical Minimum (0)	*/
+	0x26, 0xff, 0x00,		/*   Logical Maximum (255)	*/
+	0x35, 0x00,			/*   Physical Minimum (0)	*/
+	0x46, 0xff, 0x00,		/*   Physical Maximum (255)	*/
+	0x09, 0x30,			/*   Usage (X)			*/
+	0x09, 0x31,			/*   Usage (Y)			*/
+	0x09, 0x32,			/*   Usage (Z)			*/
+	0x09, 0x32,			/*   Usage (Z)			*/
+	0x09, 0x35,			/*   Usage (Rz)			*/
+	0x81, 0x02,			/*   Input (Data,Var,Abs)	*/
+};
+
+/*
+ * we fix the report descriptor by:
+ * - marking the first Z axis as constant (so it is ignored by HID)
+ * - assign the original second Z to Rx
+ * - assign the original Rz to Ry
+ */
+static const __u8 gembird_jpd_fixed_rdesc[] = {
+	0x75, 0x08,			/*   Report Size (8)		*/
+	0x95, 0x02,			/*   Report Count (2)		*/
+	0x15, 0x00,			/*   Logical Minimum (0)	*/
+	0x26, 0xff, 0x00,		/*   Logical Maximum (255)	*/
+	0x35, 0x00,			/*   Physical Minimum (0)	*/
+	0x46, 0xff, 0x00,		/*   Physical Maximum (255)	*/
+	0x09, 0x30,			/*   Usage (X)			*/
+	0x09, 0x31,			/*   Usage (Y)			*/
+	0x81, 0x02,			/*   Input (Data,Var,Abs)	*/
+	0x95, 0x01,			/*   Report Count (1)		*/
+	0x09, 0x32,			/*   Usage (Z)			*/
+	0x81, 0x01,			/*   Input (Cnst,Arr,Abs)	*/
+	0x95, 0x02,			/*   Report Count (2)		*/
+	0x09, 0x33,			/*   Usage (Rx)			*/
+	0x09, 0x34,			/*   Usage (Ry)			*/
+	0x81, 0x02,			/*   Input (Data,Var,Abs)	*/
+};
+
+static __u8 *gembird_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	__u8 *new_rdesc;
+	/* delta_size is > 0 */
+	size_t delta_size = sizeof(gembird_jpd_fixed_rdesc) -
+			    sizeof(gembird_jpd_faulty_rdesc);
+	size_t new_size = *rsize + delta_size;
+
+	if (*rsize >= 31 && !memcmp(&rdesc[GEMBIRD_START_FAULTY_RDESC],
+				    gembird_jpd_faulty_rdesc,
+				    sizeof(gembird_jpd_faulty_rdesc))) {
+		new_rdesc = devm_kzalloc(&hdev->dev, new_size, GFP_KERNEL);
+		if (new_rdesc == NULL)
+			return rdesc;
+
+		dev_info(&hdev->dev,
+			 "fixing Gembird JPD-DualForce 2 report descriptor.\n");
+
+		/* start by copying the end of the rdesc */
+		memcpy(new_rdesc + delta_size, rdesc, *rsize);
+
+		/* add the correct beginning */
+		memcpy(new_rdesc, rdesc, GEMBIRD_START_FAULTY_RDESC);
+
+		/* replace the faulty part with the fixed one */
+		memcpy(new_rdesc + GEMBIRD_START_FAULTY_RDESC,
+		       gembird_jpd_fixed_rdesc,
+		       sizeof(gembird_jpd_fixed_rdesc));
+
+		*rsize = new_size;
+		rdesc = new_rdesc;
+	}
+
+	return rdesc;
+}
+
+static const struct hid_device_id gembird_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GEMBIRD,
+			 USB_DEVICE_ID_GEMBIRD_JPD_DUALFORCE2) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, gembird_devices);
+
+static struct hid_driver gembird_driver = {
+	.name = "gembird",
+	.id_table = gembird_devices,
+	.report_fixup = gembird_report_fixup,
+};
+module_hid_driver(gembird_driver);
+
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
+MODULE_DESCRIPTION("HID Gembird joypad driver");
+MODULE_LICENSE("GPL");

drivers/hid/hid-ids.h

@@ -358,6 +358,9 @@
 #define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR	0x0001
 #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR	0x0002
 
+#define USB_VENDOR_ID_GEMBIRD			0x11ff
+#define USB_DEVICE_ID_GEMBIRD_JPD_DUALFORCE2	0x3331
+
 #define USB_VENDOR_ID_GENERAL_TOUCH	0x0dfc
 #define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0003
 #define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PWT_TENFINGERS 0x0100