[PATCH] remove net config from arch-sparc64

arch/sparc64/Kconfig

@@ -1404,47 +1404,6 @@ source "drivers/ieee1394/Kconfig"
 
 source "net/Kconfig"
 
-
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
-	bool "Network device support"
-	---help---
-	  You can say N here if you don't intend to connect your Linux box to
-	  any other computer at all or if all your connections will be over a
-	  telephone line with a modem either via UUCP (UUCP is a protocol to
-	  forward mail and news between unix hosts over telephone lines; read
-	  the UUCP-HOWTO, available from
-	  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-	  account or a BBS, even using term (term is a program which gives you
-	  almost full Internet connectivity if you have a regular dial up
-	  shell account on some Internet connected Unix computer. Read
-	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-	  You'll have to say Y if your computer contains a network card that
-	  you want to use under Linux (make sure you know its name because you
-	  will be asked for it and read the Ethernet-HOWTO (especially if you
-	  plan to use more than one network card under Linux)) or if you want
-	  to use SLIP (Serial Line Internet Protocol is the protocol used to
-	  send Internet traffic over telephone lines or null modem cables) or
-	  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-	  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-	  Protocol is mainly used to create a mini network by connecting the
-	  parallel ports of two local machines) or AX.25/KISS (protocol for
-	  sending Internet traffic over amateur radio links).
-
-	  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-	  Olaf Kirch's excellent and free book "Network Administrator's
-	  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-	  unsure, say Y.
-
-source "drivers/net/Kconfig"
-
-source "drivers/atm/Kconfig"
-
-endmenu
-
 source "net/ax25/Kconfig"
 
 # This one must be before the filesystem configs. -DaveM