Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (25 commits)
  virtio: balloon driver
  virtio: Use PCI revision field to indicate virtio PCI ABI version
  virtio: PCI device
  virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz
  virtio_blk: Dont waste major numbers
  virtio_blk: provide getgeo
  virtio_net: parametrize the napi_weight for virtio receive queue.
  virtio: free transmit skbs when notified, not on next xmit.
  virtio: flush buffers on open
  virtnet: remove double ether_setup
  virtio: Allow virtio to be modular and used by modules
  virtio: Use the sg_phys convenience function.
  virtio: Put the virtio under the virtualization menu
  virtio: handle interrupts after callbacks turned off
  virtio: reset function
  virtio: populate network rings in the probe routine, not open
  virtio: Tweak virtio_net defines
  virtio: Net header needs hdr_len
  virtio: remove unused id field from struct virtio_blk_outhdr
  virtio: clarify NO_NOTIFY flag usage
  ...

arch/x86/kvm/Kconfig

@@ -53,5 +53,6 @@ config KVM_AMD
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
 source drivers/lguest/Kconfig
+source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION

drivers/Kconfig

@@ -91,6 +91,4 @@ source "drivers/dca/Kconfig"
 source "drivers/auxdisplay/Kconfig"
 
 source "drivers/uio/Kconfig"
-
-source "drivers/virtio/Kconfig"
 endmenu

drivers/block/Kconfig

@@ -440,6 +440,7 @@ config VIRTIO_BLK
 	tristate "Virtio block driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && VIRTIO
 	---help---
-	  This is the virtual block driver for lguest.  Say Y or M.
+	  This is the virtual block driver for virtio.  It can be used with
+          lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
 endif # BLK_DEV

drivers/block/virtio_blk.c

@@ -7,8 +7,10 @@
 #include <linux/scatterlist.h>
 
 #define VIRTIO_MAX_SG	(3+MAX_PHYS_SEGMENTS)
+#define PART_BITS 4
+
+static int major, index;
 
-static unsigned char virtblk_index = 'a';
 struct virtio_blk
 {
 	spinlock_t lock;
@@ -36,7 +38,7 @@ struct virtblk_req
 	struct virtio_blk_inhdr in_hdr;
 };
 
-static bool blk_done(struct virtqueue *vq)
+static void blk_done(struct virtqueue *vq)
 {
 	struct virtio_blk *vblk = vq->vdev->priv;
 	struct virtblk_req *vbr;
@@ -65,7 +67,6 @@ static bool blk_done(struct virtqueue *vq)
 	/* In case queue is stopped waiting for more buffers. */
 	blk_start_queue(vblk->disk->queue);
 	spin_unlock_irqrestore(&vblk->lock, flags);
-	return true;
 }
 
 static bool do_req(struct request_queue *q, struct virtio_blk *vblk,
@@ -153,20 +154,37 @@ static int virtblk_ioctl(struct inode *inode, struct file *filp,
 			      (void __user *)data);
 }
 
+/* We provide getgeo only to please some old bootloader/partitioning tools */
+static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
+{
+	/* some standard values, similar to sd */
+	geo->heads = 1 << 6;
+	geo->sectors = 1 << 5;
+	geo->cylinders = get_capacity(bd->bd_disk) >> 11;
+	return 0;
+}
+
 static struct block_device_operations virtblk_fops = {
 	.ioctl  = virtblk_ioctl,
 	.owner  = THIS_MODULE,
+	.getgeo = virtblk_getgeo,
 };
 
+static int index_to_minor(int index)
+{
+	return index << PART_BITS;
+}
+
 static int virtblk_probe(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk;
-	int err, major;
-	void *token;
-	unsigned int len;
+	int err;
 	u64 cap;
 	u32 v;
 
+	if (index_to_minor(index) >= 1 << MINORBITS)
+		return -ENOSPC;
+
 	vdev->priv = vblk = kmalloc(sizeof(*vblk), GFP_KERNEL);
 	if (!vblk) {
 		err = -ENOMEM;
@@ -178,7 +196,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 	vblk->vdev = vdev;
 
 	/* We expect one virtqueue, for output. */
-	vblk->vq = vdev->config->find_vq(vdev, blk_done);
+	vblk->vq = vdev->config->find_vq(vdev, 0, blk_done);
 	if (IS_ERR(vblk->vq)) {
 		err = PTR_ERR(vblk->vq);
 		goto out_free_vblk;
@@ -190,17 +208,11 @@ static int virtblk_probe(struct virtio_device *vdev)
 		goto out_free_vq;
 	}
 
-	major = register_blkdev(0, "virtblk");
-	if (major < 0) {
-		err = major;
-		goto out_mempool;
-	}
-
 	/* FIXME: How many partitions?  How long is a piece of string? */
-	vblk->disk = alloc_disk(1 << 4);
+	vblk->disk = alloc_disk(1 << PART_BITS);
 	if (!vblk->disk) {
 		err = -ENOMEM;
-		goto out_unregister_blkdev;
+		goto out_mempool;
 	}
 
 	vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock);
@@ -209,22 +221,32 @@ static int virtblk_probe(struct virtio_device *vdev)
 		goto out_put_disk;
 	}
 
-	sprintf(vblk->disk->disk_name, "vd%c", virtblk_index++);
+	if (index < 26) {
+		sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26);
+	} else if (index < (26 + 1) * 26) {
+		sprintf(vblk->disk->disk_name, "vd%c%c",
+			'a' + index / 26 - 1, 'a' + index % 26);
+	} else {
+		const unsigned int m1 = (index / 26 - 1) / 26 - 1;
+		const unsigned int m2 = (index / 26 - 1) % 26;
+		const unsigned int m3 =  index % 26;
+		sprintf(vblk->disk->disk_name, "vd%c%c%c",
+			'a' + m1, 'a' + m2, 'a' + m3);
+	}
+
 	vblk->disk->major = major;
-	vblk->disk->first_minor = 0;
+	vblk->disk->first_minor = index_to_minor(index);
 	vblk->disk->private_data = vblk;
 	vblk->disk->fops = &virtblk_fops;
+	index++;
 
 	/* If barriers are supported, tell block layer that queue is ordered */
-	token = vdev->config->find(vdev, VIRTIO_CONFIG_BLK_F, &len);
-	if (virtio_use_bit(vdev, token, len, VIRTIO_BLK_F_BARRIER))
+	if (vdev->config->feature(vdev, VIRTIO_BLK_F_BARRIER))
 		blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
 
-	err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_CAPACITY, &cap);
-	if (err) {
-		dev_err(&vdev->dev, "Bad/missing capacity in config\n");
-		goto out_cleanup_queue;
-	}
+	/* Host must always specify the capacity. */
+	__virtio_config_val(vdev, offsetof(struct virtio_blk_config, capacity),
+			    &cap);
 
 	/* If capacity is too big, truncate with warning. */
 	if ((sector_t)cap != cap) {
@@ -234,31 +256,25 @@ static int virtblk_probe(struct virtio_device *vdev)
 	}
 	set_capacity(vblk->disk, cap);
 
-	err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_SIZE_MAX, &v);
+	/* Host can optionally specify maximum segment size and number of
+	 * segments. */
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_SIZE_MAX,
+				offsetof(struct virtio_blk_config, size_max),
+				&v);
 	if (!err)
 		blk_queue_max_segment_size(vblk->disk->queue, v);
-	else if (err != -ENOENT) {
-		dev_err(&vdev->dev, "Bad SIZE_MAX in config\n");
-		goto out_cleanup_queue;
-	}
 
-	err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_SEG_MAX, &v);
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_SEG_MAX,
+				offsetof(struct virtio_blk_config, seg_max),
+				&v);
 	if (!err)
 		blk_queue_max_hw_segments(vblk->disk->queue, v);
-	else if (err != -ENOENT) {
-		dev_err(&vdev->dev, "Bad SEG_MAX in config\n");
-		goto out_cleanup_queue;
-	}
 
 	add_disk(vblk->disk);
 	return 0;
 
-out_cleanup_queue:
-	blk_cleanup_queue(vblk->disk->queue);
 out_put_disk:
 	put_disk(vblk->disk);
-out_unregister_blkdev:
-	unregister_blkdev(major, "virtblk");
 out_mempool:
 	mempool_destroy(vblk->pool);
 out_free_vq:
@@ -274,12 +290,16 @@ static void virtblk_remove(struct virtio_device *vdev)
 	struct virtio_blk *vblk = vdev->priv;
 	int major = vblk->disk->major;
 
+	/* Nothing should be pending. */
 	BUG_ON(!list_empty(&vblk->reqs));
+
+	/* Stop all the virtqueues. */
+	vdev->config->reset(vdev);
+
 	blk_cleanup_queue(vblk->disk->queue);
 	put_disk(vblk->disk);
 	unregister_blkdev(major, "virtblk");
 	mempool_destroy(vblk->pool);
-	/* There should be nothing in the queue now, so no need to shutdown */
 	vdev->config->del_vq(vblk->vq);
 	kfree(vblk);
 }
@@ -299,11 +319,15 @@ static struct virtio_driver virtio_blk = {
 
 static int __init init(void)
 {
+	major = register_blkdev(0, "virtblk");
+	if (major < 0)
+		return major;
 	return register_virtio_driver(&virtio_blk);
 }
 
 static void __exit fini(void)
 {
+	unregister_blkdev(major, "virtblk");
 	unregister_virtio_driver(&virtio_blk);
 }
 module_init(init);

drivers/char/virtio_console.c

@@ -158,13 +158,13 @@ static int __devinit virtcons_probe(struct virtio_device *dev)
 	/* Find the input queue. */
 	/* FIXME: This is why we want to wean off hvc: we do nothing
 	 * when input comes in. */
-	in_vq = vdev->config->find_vq(vdev, NULL);
+	in_vq = vdev->config->find_vq(vdev, 0, NULL);
 	if (IS_ERR(in_vq)) {
 		err = PTR_ERR(in_vq);
 		goto free;
 	}
 
-	out_vq = vdev->config->find_vq(vdev, NULL);
+	out_vq = vdev->config->find_vq(vdev, 1, NULL);
 	if (IS_ERR(out_vq)) {
 		err = PTR_ERR(out_vq);
 		goto free_in_vq;

drivers/lguest/lguest_device.c

@@ -52,57 +52,82 @@ struct lguest_device {
 /*D:130
  * Device configurations
  *
- * The configuration information for a device consists of a series of fields.
- * We don't really care what they are: the Launcher set them up, and the driver
- * will look at them during setup.
+ * The configuration information for a device consists of one or more
+ * virtqueues, a feature bitmaks, and some configuration bytes.  The
+ * configuration bytes don't really matter to us: the Launcher sets them up, and
+ * the driver will look at them during setup.
  *
- * For us these fields come immediately after that device's descriptor in the
- * lguest_devices page.
- *
- * Each field starts with a "type" byte, a "length" byte, then that number of
- * bytes of configuration information.  The device descriptor tells us the
- * total configuration length so we know when we've reached the last field. */
+ * A convenient routine to return the device's virtqueue config array:
+ * immediately after the descriptor. */
+static struct lguest_vqconfig *lg_vq(const struct lguest_device_desc *desc)
+{
+	return (void *)(desc + 1);
+}
 
-/* type + length bytes */
-#define FHDR_LEN 2
+/* The features come immediately after the virtqueues. */
+static u8 *lg_features(const struct lguest_device_desc *desc)
+{
+	return (void *)(lg_vq(desc) + desc->num_vq);
+}
 
-/* This finds the first field of a given type for a device's configuration. */
-static void *lg_find(struct virtio_device *vdev, u8 type, unsigned int *len)
+/* The config space comes after the two feature bitmasks. */
+static u8 *lg_config(const struct lguest_device_desc *desc)
 {
-	struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
-	int i;
-
-	for (i = 0; i < desc->config_len; i += FHDR_LEN + desc->config[i+1]) {
-		if (desc->config[i] == type) {
-			/* Mark it used, so Host can know we looked at it, and
-			 * also so we won't find the same one twice. */
-			desc->config[i] |= 0x80;
-			/* Remember, the second byte is the length. */
-			*len = desc->config[i+1];
-			/* We return a pointer to the field header. */
-			return desc->config + i;
-		}
-	}
+	return lg_features(desc) + desc->feature_len * 2;
+}
+
+/* The total size of the config page used by this device (incl. desc) */
+static unsigned desc_size(const struct lguest_device_desc *desc)
+{
+	return sizeof(*desc)
+		+ desc->num_vq * sizeof(struct lguest_vqconfig)
+		+ desc->feature_len * 2
+		+ desc->config_len;
+}
 
-	/* Not found: return NULL for failure. */
-	return NULL;
+/* This tests (and acknowleges) a feature bit. */
+static bool lg_feature(struct virtio_device *vdev, unsigned fbit)
+{
+	struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
+	u8 *features;
+
+	/* Obviously if they ask for a feature off the end of our feature
+	 * bitmap, it's not set. */
+	if (fbit / 8 > desc->feature_len)
+		return false;
+
+	/* The feature bitmap comes after the virtqueues. */
+	features = lg_features(desc);
+	if (!(features[fbit / 8] & (1 << (fbit % 8))))
+		return false;
+
+	/* We set the matching bit in the other half of the bitmap to tell the
+	 * Host we want to use this feature.  We don't use this yet, but we
+	 * could in future. */
+	features[desc->feature_len + fbit / 8] |= (1 << (fbit % 8));
+	return true;
 }
 
 /* Once they've found a field, getting a copy of it is easy. */
-static void lg_get(struct virtio_device *vdev, void *token,
+static void lg_get(struct virtio_device *vdev, unsigned int offset,
 		   void *buf, unsigned len)
 {
-	/* Check they didn't ask for more than the length of the field! */
-	BUG_ON(len > ((u8 *)token)[1]);
-	memcpy(buf, token + FHDR_LEN, len);
+	struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
+
+	/* Check they didn't ask for more than the length of the config! */
+	BUG_ON(offset + len > desc->config_len);
+	memcpy(buf, lg_config(desc) + offset, len);
 }
 
 /* Setting the contents is also trivial. */
-static void lg_set(struct virtio_device *vdev, void *token,
+static void lg_set(struct virtio_device *vdev, unsigned int offset,
 		   const void *buf, unsigned len)
 {
-	BUG_ON(len > ((u8 *)token)[1]);
-	memcpy(token + FHDR_LEN, buf, len);
+	struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
+
+	/* Check they didn't ask for more than the length of the config! */
+	BUG_ON(offset + len > desc->config_len);
+	memcpy(lg_config(desc) + offset, buf, len);
 }
 
 /* The operations to get and set the status word just access the status field
@@ -114,9 +139,20 @@ static u8 lg_get_status(struct virtio_device *vdev)
 
 static void lg_set_status(struct virtio_device *vdev, u8 status)
 {
+	BUG_ON(!status);
 	to_lgdev(vdev)->desc->status = status;
 }
 
+/* To reset the device, we (ab)use the NOTIFY hypercall, with the descriptor
+ * address of the device.  The Host will zero the status and all the
+ * features. */
+static void lg_reset(struct virtio_device *vdev)
+{
+	unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
+
+	hcall(LHCALL_NOTIFY, (max_pfn<<PAGE_SHIFT) + offset, 0, 0);
+}
+
 /*
  * Virtqueues
  *
@@ -165,39 +201,29 @@ static void lg_notify(struct virtqueue *vq)
  *
  * So we provide devices with a "find virtqueue and set it up" function. */
 static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
-				    bool (*callback)(struct virtqueue *vq))
+				    unsigned index,
+				    void (*callback)(struct virtqueue *vq))
 {
+	struct lguest_device *ldev = to_lgdev(vdev);
 	struct lguest_vq_info *lvq;
 	struct virtqueue *vq;
-	unsigned int len;
-	void *token;
 	int err;
 
-	/* Look for a field of the correct type to mark a virtqueue.  Note that
-	 * if this succeeds, then the type will be changed so it won't be found
-	 * again, and future lg_find_vq() calls will find the next
-	 * virtqueue (if any). */
-	token = vdev->config->find(vdev, VIRTIO_CONFIG_F_VIRTQUEUE, &len);
-	if (!token)
+	/* We must have this many virtqueues. */
+	if (index >= ldev->desc->num_vq)
 		return ERR_PTR(-ENOENT);
 
 	lvq = kmalloc(sizeof(*lvq), GFP_KERNEL);
 	if (!lvq)
 		return ERR_PTR(-ENOMEM);
 
-	/* Note: we could use a configuration space inside here, just like we
-	 * do for the device.  This would allow expansion in future, because
-	 * our configuration system is designed to be expansible.  But this is
-	 * way easier. */
-	if (len != sizeof(lvq->config)) {
-		dev_err(&vdev->dev, "Unexpected virtio config len %u\n", len);
-		err = -EIO;
-		goto free_lvq;
-	}
-	/* Make a copy of the "struct lguest_vqconfig" field.  We need a copy
-	 * because the config space might not be aligned correctly. */
-	vdev->config->get(vdev, token, &lvq->config, sizeof(lvq->config));
+	/* Make a copy of the "struct lguest_vqconfig" entry, which sits after
+	 * the descriptor.  We need a copy because the config space might not
+	 * be aligned correctly. */
+	memcpy(&lvq->config, lg_vq(ldev->desc)+index, sizeof(lvq->config));
 
+	printk("Mapping virtqueue %i addr %lx\n", index,
+	       (unsigned long)lvq->config.pfn << PAGE_SHIFT);
 	/* Figure out how many pages the ring will take, and map that memory */
 	lvq->pages = lguest_map((unsigned long)lvq->config.pfn << PAGE_SHIFT,
 				DIV_ROUND_UP(vring_size(lvq->config.num,
@@ -259,11 +285,12 @@ static void lg_del_vq(struct virtqueue *vq)
 
 /* The ops structure which hooks everything together. */
 static struct virtio_config_ops lguest_config_ops = {
-	.find = lg_find,
+	.feature = lg_feature,
 	.get = lg_get,
 	.set = lg_set,
 	.get_status = lg_get_status,
 	.set_status = lg_set_status,
+	.reset = lg_reset,
 	.find_vq = lg_find_vq,
 	.del_vq = lg_del_vq,
 };
@@ -329,13 +356,14 @@ static void scan_devices(void)
 	struct lguest_device_desc *d;
 
 	/* We start at the page beginning, and skip over each entry. */
-	for (i = 0; i < PAGE_SIZE; i += sizeof(*d) + d->config_len) {
+	for (i = 0; i < PAGE_SIZE; i += desc_size(d)) {
 		d = lguest_devices + i;
 
 		/* Once we hit a zero, stop. */
 		if (d->type == 0)
 			break;
 
+		printk("Device at %i has size %u\n", i, desc_size(d));
 		add_lguest_device(d);
 	}
 }

drivers/net/Kconfig

@@ -3114,6 +3114,7 @@ config VIRTIO_NET
 	tristate "Virtio network driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && VIRTIO
 	---help---
-	  This is the virtual network driver for lguest.  Say Y or M.
+	  This is the virtual network driver for virtio.  It can be used with
+          lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
 endif # NETDEVICES

drivers/virtio/Kconfig

 # Virtio always gets selected by whoever wants it.
 config VIRTIO
-	bool
+	tristate
 
 # Similarly the virtio ring implementation.
 config VIRTIO_RING
-	bool
+	tristate
 	depends on VIRTIO
+
+config VIRTIO_PCI
+	tristate "PCI driver for virtio devices (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select VIRTIO
+	select VIRTIO_RING
+	---help---
+	  This drivers provides support for virtio based paravirtual device
+	  drivers over PCI.  This requires that your VMM has appropriate PCI
+	  virtio backends.  Most QEMU based VMMs should support these devices
+	  (like KVM or Xen).
+
+	  Currently, the ABI is not considered stable so there is no guarantee
+	  that this version of the driver will work with your VMM.
+
+	  If unsure, say M.
+
+config VIRTIO_BALLOON
+	tristate "Virtio balloon driver (EXPERIMENTAL)"
+	select VIRTIO
+	select VIRTIO_RING
+	---help---
+	 This driver supports increasing and decreasing the amount
+	 of memory within a KVM guest.
+
+	 If unsure, say M.
+

drivers/virtio/Makefile

 obj-$(CONFIG_VIRTIO) += virtio.o
 obj-$(CONFIG_VIRTIO_RING) += virtio_ring.o
+obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
+obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o

drivers/virtio/virtio.c

@@ -102,9 +102,13 @@ static int virtio_dev_remove(struct device *_d)
 	struct virtio_driver *drv = container_of(dev->dev.driver,
 						 struct virtio_driver, driver);
 
-	dev->config->set_status(dev, dev->config->get_status(dev)
-				& ~VIRTIO_CONFIG_S_DRIVER);
 	drv->remove(dev);
+
+	/* Driver should have reset device. */
+	BUG_ON(dev->config->get_status(dev));
+
+	/* Acknowledge the device's existence again. */
+	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
 	return 0;
 }
 
@@ -130,6 +134,10 @@ int register_virtio_device(struct virtio_device *dev)
 	dev->dev.bus = &virtio_bus;
 	sprintf(dev->dev.bus_id, "%u", dev->index);
 
+	/* We always start by resetting the device, in case a previous
+	 * driver messed it up.  This also tests that code path a little. */
+	dev->config->reset(dev);
+
 	/* Acknowledge that we've seen the device. */
 	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
 
@@ -148,55 +156,18 @@ void unregister_virtio_device(struct virtio_device *dev)
 }
 EXPORT_SYMBOL_GPL(unregister_virtio_device);
 
-int __virtio_config_val(struct virtio_device *vdev,
-			u8 type, void *val, size_t size)
-{
-	void *token;
-	unsigned int len;
-
-	token = vdev->config->find(vdev, type, &len);
-	if (!token)
-		return -ENOENT;
-
-	if (len != size)
-		return -EIO;
-
-	vdev->config->get(vdev, token, val, size);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(__virtio_config_val);
-
-int virtio_use_bit(struct virtio_device *vdev,
-		   void *token, unsigned int len, unsigned int bitnum)
-{
-	unsigned long bits[16];
-
-	/* This makes it convenient to pass-through find() results. */
-	if (!token)
-		return 0;
-
-	/* bit not in range of this bitfield? */
-	if (bitnum * 8 >= len / 2)
-		return 0;
-
-	/* Giant feature bitfields are silly. */
-	BUG_ON(len > sizeof(bits));
-	vdev->config->get(vdev, token, bits, len);
-
-	if (!test_bit(bitnum, bits))
-		return 0;
-
-	/* Set acknowledge bit, and write it back. */
-	set_bit(bitnum + len * 8 / 2, bits);
-	vdev->config->set(vdev, token, bits, len);
-	return 1;
-}
-EXPORT_SYMBOL_GPL(virtio_use_bit);
-
 static int virtio_init(void)
 {
 	if (bus_register(&virtio_bus) != 0)
 		panic("virtio bus registration failed");
 	return 0;
 }
+
+static void __exit virtio_exit(void)
+{
+	bus_unregister(&virtio_bus);
+}
 core_initcall(virtio_init);
+module_exit(virtio_exit);
+
+MODULE_LICENSE("GPL");

drivers/virtio/virtio_balloon.c

+/* Virtio balloon implementation, inspired by Dor Loar and Marcelo
+ * Tosatti's implementations.
+ *
+ *  Copyright 2008 Rusty Russell IBM Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+//#define DEBUG
+#include <linux/virtio.h>
+#include <linux/virtio_balloon.h>
+#include <linux/swap.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+struct virtio_balloon
+{
+	struct virtio_device *vdev;
+	struct virtqueue *inflate_vq, *deflate_vq;
+
+	/* Where the ballooning thread waits for config to change. */
+	wait_queue_head_t config_change;
+
+	/* The thread servicing the balloon. */
+	struct task_struct *thread;
+
+	/* Waiting for host to ack the pages we released. */
+	struct completion acked;
+
+	/* Do we have to tell Host *before* we reuse pages? */
+	bool tell_host_first;
+
+	/* The pages we've told the Host we're not using. */
+	unsigned int num_pages;
+	struct list_head pages;
+
+	/* The array of pfns we tell the Host about. */
+	unsigned int num_pfns;
+	u32 pfns[256];
+};
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_BALLOON, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+static void balloon_ack(struct virtqueue *vq)
+{
+	struct virtio_balloon *vb;
+	unsigned int len;
+
+	vb = vq->vq_ops->get_buf(vq, &len);
+	if (vb)
+		complete(&vb->acked);
+}
+
+static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
+{
+	struct scatterlist sg;
+
+	sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
+
+	init_completion(&vb->acked);
+
+	/* We should always be able to add one buffer to an empty queue. */
+	if (vq->vq_ops->add_buf(vq, &sg, 1, 0, vb) != 0)
+		BUG();
+	vq->vq_ops->kick(vq);
+
+	/* When host has read buffer, this completes via balloon_ack */
+	wait_for_completion(&vb->acked);
+}
+
+static void fill_balloon(struct virtio_balloon *vb, size_t num)
+{
+	/* We can only do one array worth at a time. */
+	num = min(num, ARRAY_SIZE(vb->pfns));
+
+	for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) {
+		struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY);
+		if (!page) {
+			if (printk_ratelimit())
+				dev_printk(KERN_INFO, &vb->vdev->dev,
+					   "Out of puff! Can't get %zu pages\n",
+					   num);
+			/* Sleep for at least 1/5 of a second before retry. */
+			msleep(200);
+			break;
+		}
+		vb->pfns[vb->num_pfns] = page_to_pfn(page);
+		totalram_pages--;
+		vb->num_pages++;
+		list_add(&page->lru, &vb->pages);
+	}
+
+	/* Didn't get any?  Oh well. */
+	if (vb->num_pfns == 0)
+		return;
+
+	tell_host(vb, vb->inflate_vq);
+}
+
+static void release_pages_by_pfn(const u32 pfns[], unsigned int num)
+{
+	unsigned int i;
+
+	for (i = 0; i < num; i++) {
+		__free_page(pfn_to_page(pfns[i]));
+		totalram_pages++;
+	}
+}
+
+static void leak_balloon(struct virtio_balloon *vb, size_t num)
+{
+	struct page *page;
+
+	/* We can only do one array worth at a time. */
+	num = min(num, ARRAY_SIZE(vb->pfns));
+
+	for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) {
+		page = list_first_entry(&vb->pages, struct page, lru);
+		list_del(&page->lru);
+		vb->pfns[vb->num_pfns] = page_to_pfn(page);
+		vb->num_pages--;
+	}
+
+	if (vb->tell_host_first) {
+		tell_host(vb, vb->deflate_vq);
+		release_pages_by_pfn(vb->pfns, vb->num_pfns);
+	} else {
+		release_pages_by_pfn(vb->pfns, vb->num_pfns);
+		tell_host(vb, vb->deflate_vq);
+	}
+}
+
+static void virtballoon_changed(struct virtio_device *vdev)
+{
+	struct virtio_balloon *vb = vdev->priv;
+
+	wake_up(&vb->config_change);
+}
+
+static inline int towards_target(struct virtio_balloon *vb)
+{
+	u32 v;
+	__virtio_config_val(vb->vdev,
+			    offsetof(struct virtio_balloon_config, num_pages),
+			    &v);
+	return v - vb->num_pages;
+}
+
+static void update_balloon_size(struct virtio_balloon *vb)
+{
+	__le32 actual = cpu_to_le32(vb->num_pages);
+
+	vb->vdev->config->set(vb->vdev,
+			      offsetof(struct virtio_balloon_config, actual),
+			      &actual, sizeof(actual));
+}
+
+static int balloon(void *_vballoon)
+{
+	struct virtio_balloon *vb = _vballoon;
+
+	set_freezable();
+	while (!kthread_should_stop()) {
+		int diff;
+
+		try_to_freeze();
+		wait_event_interruptible(vb->config_change,
+					 (diff = towards_target(vb)) != 0
+					 || kthread_should_stop());
+		if (diff > 0)
+			fill_balloon(vb, diff);
+		else if (diff < 0)
+			leak_balloon(vb, -diff);
+		update_balloon_size(vb);
+	}
+	return 0;
+}
+
+static int virtballoon_probe(struct virtio_device *vdev)
+{
+	struct virtio_balloon *vb;
+	int err;
+
+	vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL);
+	if (!vb) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	INIT_LIST_HEAD(&vb->pages);
+	vb->num_pages = 0;
+	init_waitqueue_head(&vb->config_change);
+	vb->vdev = vdev;
+
+	/* We expect two virtqueues. */
+	vb->inflate_vq = vdev->config->find_vq(vdev, 0, balloon_ack);
+	if (IS_ERR(vb->inflate_vq)) {
+		err = PTR_ERR(vb->inflate_vq);
+		goto out_free_vb;
+	}
+
+	vb->deflate_vq = vdev->config->find_vq(vdev, 1, balloon_ack);
+	if (IS_ERR(vb->deflate_vq)) {
+		err = PTR_ERR(vb->deflate_vq);
+		goto out_del_inflate_vq;
+	}
+
+	vb->thread = kthread_run(balloon, vb, "vballoon");
+	if (IS_ERR(vb->thread)) {
+		err = PTR_ERR(vb->thread);
+		goto out_del_deflate_vq;
+	}
+
+	vb->tell_host_first
+		= vdev->config->feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
+
+	return 0;
+
+out_del_deflate_vq:
+	vdev->config->del_vq(vb->deflate_vq);
+out_del_inflate_vq:
+	vdev->config->del_vq(vb->inflate_vq);
+out_free_vb:
+	kfree(vb);
+out:
+	return err;
+}
+
+static void virtballoon_remove(struct virtio_device *vdev)
+{
+	struct virtio_balloon *vb = vdev->priv;
+
+	kthread_stop(vb->thread);
+
+	/* There might be pages left in the balloon: free them. */
+	while (vb->num_pages)
+		leak_balloon(vb, vb->num_pages);
+
+	/* Now we reset the device so we can clean up the queues. */
+	vdev->config->reset(vdev);
+
+	vdev->config->del_vq(vb->deflate_vq);
+	vdev->config->del_vq(vb->inflate_vq);
+	kfree(vb);
+}
+
+static struct virtio_driver virtio_balloon = {
+	.driver.name =	KBUILD_MODNAME,
+	.driver.owner =	THIS_MODULE,
+	.id_table =	id_table,
+	.probe =	virtballoon_probe,
+	.remove =	__devexit_p(virtballoon_remove),
+	.config_changed = virtballoon_changed,
+};
+
+static int __init init(void)
+{
+	return register_virtio_driver(&virtio_balloon);
+}
+
+static void __exit fini(void)
+{
+	unregister_virtio_driver(&virtio_balloon);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio balloon driver");
+MODULE_LICENSE("GPL");

drivers/virtio/virtio_ring.c

@@ -87,6 +87,8 @@ static int vring_add_buf(struct virtqueue *_vq,
 	if (vq->num_free < out + in) {
 		pr_debug("Can't add buf len %i - avail = %i\n",
 			 out + in, vq->num_free);
+		/* We notify *even if* VRING_USED_F_NO_NOTIFY is set here. */
+		vq->notify(&vq->vq);
 		END_USE(vq);
 		return -ENOSPC;
 	}
@@ -97,16 +99,14 @@ static int vring_add_buf(struct virtqueue *_vq,
 	head = vq->free_head;
 	for (i = vq->free_head; out; i = vq->vring.desc[i].next, out--) {
 		vq->vring.desc[i].flags = VRING_DESC_F_NEXT;
-		vq->vring.desc[i].addr = (page_to_pfn(sg_page(sg))<<PAGE_SHIFT)
-			+ sg->offset;
+		vq->vring.desc[i].addr = sg_phys(sg);
 		vq->vring.desc[i].len = sg->length;
 		prev = i;
 		sg++;
 	}
 	for (; in; i = vq->vring.desc[i].next, in--) {
 		vq->vring.desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
-		vq->vring.desc[i].addr = (page_to_pfn(sg_page(sg))<<PAGE_SHIFT)
-			+ sg->offset;
+		vq->vring.desc[i].addr = sg_phys(sg);
 		vq->vring.desc[i].len = sg->length;
 		prev = i;
 		sg++;
@@ -171,16 +171,6 @@ static void detach_buf(struct vring_virtqueue *vq, unsigned int head)
 	vq->num_free++;
 }
 
-/* FIXME: We need to tell other side about removal, to synchronize. */
-static void vring_shutdown(struct virtqueue *_vq)
-{
-	struct vring_virtqueue *vq = to_vvq(_vq);
-	unsigned int i;
-
-	for (i = 0; i < vq->vring.num; i++)
-		detach_buf(vq, i);
-}
-
 static inline bool more_used(const struct vring_virtqueue *vq)
 {
 	return vq->last_used_idx != vq->vring.used->idx;
@@ -220,7 +210,17 @@ static void *vring_get_buf(struct virtqueue *_vq, unsigned int *len)
 	return ret;
 }
 
-static bool vring_restart(struct virtqueue *_vq)
+static void vring_disable_cb(struct virtqueue *_vq)
+{
+	struct vring_virtqueue *vq = to_vvq(_vq);
+
+	START_USE(vq);
+	BUG_ON(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT);
+	vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
+	END_USE(vq);
+}
+
+static bool vring_enable_cb(struct virtqueue *_vq)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
 
@@ -253,26 +253,34 @@ irqreturn_t vring_interrupt(int irq, void *_vq)
 	if (unlikely(vq->broken))
 		return IRQ_HANDLED;
 
+	/* Other side may have missed us turning off the interrupt,
+	 * but we should preserve disable semantic for virtio users. */
+	if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
+		pr_debug("virtqueue interrupt after disable for %p\n", vq);
+		return IRQ_HANDLED;
+	}
+
 	pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback);
-	if (vq->vq.callback && !vq->vq.callback(&vq->vq))
-		vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
+	if (vq->vq.callback)
+		vq->vq.callback(&vq->vq);
 
 	return IRQ_HANDLED;
 }
+EXPORT_SYMBOL_GPL(vring_interrupt);
 
 static struct virtqueue_ops vring_vq_ops = {
 	.add_buf = vring_add_buf,
 	.get_buf = vring_get_buf,
 	.kick = vring_kick,
-	.restart = vring_restart,
-	.shutdown = vring_shutdown,
+	.disable_cb = vring_disable_cb,
+	.enable_cb = vring_enable_cb,
 };
 
 struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *),
-				      bool (*callback)(struct virtqueue *))
+				      void (*callback)(struct virtqueue *))
 {
 	struct vring_virtqueue *vq;
 	unsigned int i;
@@ -311,9 +319,12 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 
 	return &vq->vq;
 }
+EXPORT_SYMBOL_GPL(vring_new_virtqueue);
 
 void vring_del_virtqueue(struct virtqueue *vq)
 {
 	kfree(to_vvq(vq));
 }
+EXPORT_SYMBOL_GPL(vring_del_virtqueue);
 
+MODULE_LICENSE("GPL");

include/linux/lguest_launcher.h

@@ -23,7 +23,12 @@
 struct lguest_device_desc {
 	/* The device type: console, network, disk etc.  Type 0 terminates. */
 	__u8 type;
-	/* The number of bytes of the config array. */
+	/* The number of virtqueues (first in config array) */
+	__u8 num_vq;
+	/* The number of bytes of feature bits.  Multiply by 2: one for host
+	 * features and one for guest acknowledgements. */
+	__u8 feature_len;
+	/* The number of bytes of the config array after virtqueues. */
 	__u8 config_len;
 	/* A status byte, written by the Guest. */
 	__u8 status;
@@ -31,7 +36,7 @@ struct lguest_device_desc {
 };
 
 /*D:135 This is how we expect the device configuration field for a virtqueue
- * (type VIRTIO_CONFIG_F_VIRTQUEUE) to be laid out: */
+ * to be laid out in config space. */
 struct lguest_vqconfig {
 	/* The number of entries in the virtio_ring */
 	__u16 num;

include/linux/skbuff.h

@@ -1810,5 +1810,6 @@ static inline void skb_forward_csum(struct sk_buff *skb)
 		skb->ip_summed = CHECKSUM_NONE;
 }
 
+bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off);
 #endif	/* __KERNEL__ */
 #endif	/* _LINUX_SKBUFF_H */

include/linux/virtio.h

@@ -11,15 +11,13 @@
 /**
  * virtqueue - a queue to register buffers for sending or receiving.
  * @callback: the function to call when buffers are consumed (can be NULL).
- *    If this returns false, callbacks are suppressed until vq_ops->restart
- *    is called.
  * @vdev: the virtio device this queue was created for.
  * @vq_ops: the operations for this virtqueue (see below).
  * @priv: a pointer for the virtqueue implementation to use.
  */
 struct virtqueue
 {
-	bool (*callback)(struct virtqueue *vq);
+	void (*callback)(struct virtqueue *vq);
 	struct virtio_device *vdev;
 	struct virtqueue_ops *vq_ops;
 	void *priv;
@@ -41,13 +39,12 @@ struct virtqueue
  *	vq: the struct virtqueue we're talking about.
  *	len: the length written into the buffer
  *	Returns NULL or the "data" token handed to add_buf.
- * @restart: restart callbacks after callback returned false.
+ * @disable_cb: disable callbacks
+ *	vq: the struct virtqueue we're talking about.
+ * @enable_cb: restart callbacks after disable_cb.
  *	vq: the struct virtqueue we're talking about.
  *	This returns "false" (and doesn't re-enable) if there are pending
  *	buffers in the queue, to avoid a race.
- * @shutdown: "unadd" all buffers.
- *	vq: the struct virtqueue we're talking about.
- *	Remove everything from the queue.
  *
  * Locking rules are straightforward: the driver is responsible for
  * locking.  No two operations may be invoked simultaneously.
@@ -65,9 +62,8 @@ struct virtqueue_ops {
 
 	void *(*get_buf)(struct virtqueue *vq, unsigned int *len);
 
-	bool (*restart)(struct virtqueue *vq);
-
-	void (*shutdown)(struct virtqueue *vq);
+	void (*disable_cb)(struct virtqueue *vq);
+	bool (*enable_cb)(struct virtqueue *vq);
 };
 
 /**
@@ -97,12 +93,15 @@ void unregister_virtio_device(struct virtio_device *dev);
  * @probe: the function to call when a device is found.  Returns a token for
  *    remove, or PTR_ERR().
  * @remove: the function when a device is removed.
+ * @config_changed: optional function to call when the device configuration
+ *    changes; may be called in interrupt context.
  */
 struct virtio_driver {
 	struct device_driver driver;
 	const struct virtio_device_id *id_table;
 	int (*probe)(struct virtio_device *dev);
 	void (*remove)(struct virtio_device *dev);
+	void (*config_changed)(struct virtio_device *dev);
 };
 
 int register_virtio_driver(struct virtio_driver *drv);

include/linux/virtio_balloon.h

+#ifndef _LINUX_VIRTIO_BALLOON_H
+#define _LINUX_VIRTIO_BALLOON_H
+#include <linux/virtio_config.h>
+
+/* The ID for virtio_balloon */
+#define VIRTIO_ID_BALLOON	5
+
+/* The feature bitmap for virtio balloon */
+#define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
+
+struct virtio_balloon_config
+{
+	/* Number of pages host wants Guest to give up. */
+	__le32 num_pages;
+	/* Number of pages we've actually got in balloon. */
+	__le32 actual;
+};
+#endif /* _LINUX_VIRTIO_BALLOON_H */

include/linux/virtio_blk.h

@@ -6,15 +6,19 @@
 #define VIRTIO_ID_BLOCK	2
 
 /* Feature bits */
-#define VIRTIO_CONFIG_BLK_F	0x40
-#define VIRTIO_BLK_F_BARRIER	1	/* Does host support barriers? */
+#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
+#define VIRTIO_BLK_F_SIZE_MAX	1	/* Indicates maximum segment size */
+#define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
 
-/* The capacity (in 512-byte sectors). */
-#define VIRTIO_CONFIG_BLK_F_CAPACITY	0x41
-/* The maximum segment size. */
-#define VIRTIO_CONFIG_BLK_F_SIZE_MAX	0x42
-/* The maximum number of segments. */
-#define VIRTIO_CONFIG_BLK_F_SEG_MAX	0x43
+struct virtio_blk_config
+{
+	/* The capacity (in 512-byte sectors). */
+	__le64 capacity;
+	/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
+	__le32 size_max;
+	/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
+	__le32 seg_max;
+} __attribute__((packed));
 
 /* These two define direction. */
 #define VIRTIO_BLK_T_IN		0
@@ -35,8 +39,6 @@ struct virtio_blk_outhdr
 	__u32 ioprio;
 	/* Sector (ie. 512 byte offset) */
 	__u64 sector;
-	/* Where to put reply. */
-	__u64 id;
 };
 
 #define VIRTIO_BLK_S_OK		0

include/linux/virtio_config.h

@@ -5,7 +5,7 @@
  * store and access that space differently. */
 #include <linux/types.h>
 
-/* Status byte for guest to report progress, and synchronize config. */
+/* Status byte for guest to report progress, and synchronize features. */
 /* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
 #define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
 /* We have found a driver for the device. */
@@ -15,34 +15,27 @@
 /* We've given up on this device. */
 #define VIRTIO_CONFIG_S_FAILED		0x80
 
-/* Feature byte (actually 7 bits availabe): */
-/* Requirements/features of the virtio implementation. */
-#define VIRTIO_CONFIG_F_VIRTIO 1
-/* Requirements/features of the virtqueue (may have more than one). */
-#define VIRTIO_CONFIG_F_VIRTQUEUE 2
-
 #ifdef __KERNEL__
 struct virtio_device;
 
 /**
  * virtio_config_ops - operations for configuring a virtio device
- * @find: search for the next configuration field of the given type.
+ * @feature: search for a feature in this config
  *	vdev: the virtio_device
- *	type: the feature type
- *	len: the (returned) length of the field if found.
- *	Returns a token if found, or NULL.  Never returnes the same field twice
- *	(ie. it's used up).
- * @get: read the value of a configuration field after find().
+ *	bit: the feature bit
+ *	Returns true if the feature is supported.  Acknowledges the feature
+ *	so the host can see it.
+ * @get: read the value of a configuration field
  *	vdev: the virtio_device
- *	token: the token returned from find().
+ *	offset: the offset of the configuration field
  *	buf: the buffer to write the field value into.
- *	len: the length of the buffer (given by find()).
+ *	len: the length of the buffer
  *	Note that contents are conventionally little-endian.
- * @set: write the value of a configuration field after find().
+ * @set: write the value of a configuration field
  *	vdev: the virtio_device
- *	token: the token returned from find().
+ *	offset: the offset of the configuration field
  *	buf: the buffer to read the field value from.
- *	len: the length of the buffer (given by find()).
+ *	len: the length of the buffer
  *	Note that contents are conventionally little-endian.
  * @get_status: read the status byte
  *	vdev: the virtio_device
@@ -50,62 +43,67 @@ struct virtio_device;
  * @set_status: write the status byte
  *	vdev: the virtio_device
  *	status: the new status byte
- * @find_vq: find the first VIRTIO_CONFIG_F_VIRTQUEUE and create a virtqueue.
+ * @reset: reset the device
+ *	vdev: the virtio device
+ *	After this, status and feature negotiation must be done again
+ * @find_vq: find a virtqueue and instantiate it.
  *	vdev: the virtio_device
+ *	index: the 0-based virtqueue number in case there's more than one.
  *	callback: the virqtueue callback
- *	Returns the new virtqueue or ERR_PTR().
+ *	Returns the new virtqueue or ERR_PTR() (eg. -ENOENT).
  * @del_vq: free a virtqueue found by find_vq().
  */
 struct virtio_config_ops
 {
-	void *(*find)(struct virtio_device *vdev, u8 type, unsigned *len);
-	void (*get)(struct virtio_device *vdev, void *token,
+	bool (*feature)(struct virtio_device *vdev, unsigned bit);
+	void (*get)(struct virtio_device *vdev, unsigned offset,
 		    void *buf, unsigned len);
-	void (*set)(struct virtio_device *vdev, void *token,
+	void (*set)(struct virtio_device *vdev, unsigned offset,
 		    const void *buf, unsigned len);
 	u8 (*get_status)(struct virtio_device *vdev);
 	void (*set_status)(struct virtio_device *vdev, u8 status);
+	void (*reset)(struct virtio_device *vdev);
 	struct virtqueue *(*find_vq)(struct virtio_device *vdev,
-				     bool (*callback)(struct virtqueue *));
+				     unsigned index,
+				     void (*callback)(struct virtqueue *));
 	void (*del_vq)(struct virtqueue *vq);
 };
 
 /**
- * virtio_config_val - get a single virtio config and mark it used.
- * @config: the virtio config space
- * @type: the type to search for.
+ * virtio_config_val - look for a feature and get a single virtio config.
+ * @vdev: the virtio device
+ * @fbit: the feature bit
+ * @offset: the type to search for.
+ * @val: a pointer to the value to fill in.
+ *
+ * The return value is -ENOENT if the feature doesn't exist.  Otherwise
+ * the value is endian-corrected and returned in v. */
+#define virtio_config_val(vdev, fbit, offset, v) ({			\
+	int _err;							\
+	if ((vdev)->config->feature((vdev), (fbit))) {			\
+		__virtio_config_val((vdev), (offset), (v));		\
+		_err = 0;						\
+	} else								\
+		_err = -ENOENT;						\
+	_err;								\
+})
+
+/**
+ * __virtio_config_val - get a single virtio config without feature check.
+ * @vdev: the virtio device
+ * @offset: the type to search for.
  * @val: a pointer to the value to fill in.
  *
- * Once used, the config type is marked with VIRTIO_CONFIG_F_USED so it can't
- * be found again.  This version does endian conversion. */
-#define virtio_config_val(vdev, type, v) ({				\
-	int _err = __virtio_config_val((vdev),(type),(v),sizeof(*(v))); \
-									\
+ * The value is endian-corrected and returned in v. */
+#define __virtio_config_val(vdev, offset, v) do {			\
 	BUILD_BUG_ON(sizeof(*(v)) != 1 && sizeof(*(v)) != 2		\
 		     && sizeof(*(v)) != 4 && sizeof(*(v)) != 8);	\
-	if (!_err) {							\
+	(vdev)->config->get((vdev), (offset), (v), sizeof(*(v)));	\
 	switch (sizeof(*(v))) {						\
 	case 2: le16_to_cpus((__u16 *) v); break;			\
 	case 4: le32_to_cpus((__u32 *) v); break;			\
 	case 8: le64_to_cpus((__u64 *) v); break;			\
 	}								\
-	}								\
-	_err;								\
-})
-
-int __virtio_config_val(struct virtio_device *dev,
-			u8 type, void *val, size_t size);
-
-/**
- * virtio_use_bit - helper to use a feature bit in a bitfield value.
- * @dev: the virtio device
- * @token: the token as returned from vdev->config->find().
- * @len: the length of the field.
- * @bitnum: the bit to test.
- *
- * If handed a NULL token, it returns false, otherwise returns bit status.
- * If it's one, it sets the mirroring acknowledgement bit. */
-int virtio_use_bit(struct virtio_device *vdev,
-		   void *token, unsigned int len, unsigned int bitnum);
+} while(0)
 #endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_CONFIG_H */

include/linux/virtio_net.h

@@ -5,16 +5,16 @@
 /* The ID for virtio_net */
 #define VIRTIO_ID_NET	1
 
-/* The bitmap of config for virtio net */
-#define VIRTIO_CONFIG_NET_F	0x40
-#define VIRTIO_NET_F_NO_CSUM	0
-#define VIRTIO_NET_F_TSO4	1
-#define VIRTIO_NET_F_UFO	2
-#define VIRTIO_NET_F_TSO4_ECN	3
-#define VIRTIO_NET_F_TSO6	4
+/* The feature bitmap for virtio net */
+#define VIRTIO_NET_F_CSUM	0	/* Can handle pkts w/ partial csum */
+#define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
+#define VIRTIO_NET_F_GSO	6	/* Can handle pkts w/ any GSO type */
 
-/* The config defining mac address. */
-#define VIRTIO_CONFIG_NET_MAC_F	0x41
+struct virtio_net_config
+{
+	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
+	__u8 mac[6];
+} __attribute__((packed));
 
 /* This is the first element of the scatter-gather list.  If you don't
  * specify GSO or CSUM features, you can simply ignore the header. */
@@ -24,13 +24,13 @@ struct virtio_net_hdr
 	__u8 flags;
 #define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
 #define VIRTIO_NET_HDR_GSO_TCPV4	1	// GSO frame, IPv4 TCP (TSO)
-/* FIXME: Do we need this?  If they said they can handle ECN, do they care? */
-#define VIRTIO_NET_HDR_GSO_TCPV4_ECN	2	// GSO frame, IPv4 TCP w/ ECN
 #define VIRTIO_NET_HDR_GSO_UDP		3	// GSO frame, IPv4 UDP (UFO)
 #define VIRTIO_NET_HDR_GSO_TCPV6	4	// GSO frame, IPv6 TCP
+#define VIRTIO_NET_HDR_GSO_ECN		0x80	// TCP has ECN set
 	__u8 gso_type;
-      __u16 gso_size;
-      __u16 csum_start;
-      __u16 csum_offset;
+	__u16 hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
+	__u16 gso_size;		/* Bytes to append to gso_hdr_len per frame */
+	__u16 csum_start;	/* Position to start checksumming from */
+	__u16 csum_offset;	/* Offset after that to place checksum */
 };
 #endif /* _LINUX_VIRTIO_NET_H */

include/linux/virtio_pci.h

+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ *  Anthony Liguori  <aliguori@us.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef _LINUX_VIRTIO_PCI_H
+#define _LINUX_VIRTIO_PCI_H
+
+#include <linux/virtio_config.h>
+
+/* A 32-bit r/o bitmask of the features supported by the host */
+#define VIRTIO_PCI_HOST_FEATURES	0
+
+/* A 32-bit r/w bitmask of features activated by the guest */
+#define VIRTIO_PCI_GUEST_FEATURES	4
+
+/* A 32-bit r/w PFN for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_PFN		8
+
+/* A 16-bit r/o queue size for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_NUM		12
+
+/* A 16-bit r/w queue selector */
+#define VIRTIO_PCI_QUEUE_SEL		14
+
+/* A 16-bit r/w queue notifier */
+#define VIRTIO_PCI_QUEUE_NOTIFY		16
+
+/* An 8-bit device status register.  */
+#define VIRTIO_PCI_STATUS		18
+
+/* An 8-bit r/o interrupt status register.  Reading the value will return the
+ * current contents of the ISR and will also clear it.  This is effectively
+ * a read-and-acknowledge. */
+#define VIRTIO_PCI_ISR			19
+
+/* The bit of the ISR which indicates a device configuration change. */
+#define VIRTIO_PCI_ISR_CONFIG		0x2
+
+/* The remaining space is defined by each driver as the per-driver
+ * configuration space */
+#define VIRTIO_PCI_CONFIG		20
+
+/* Virtio ABI version, this must match exactly */
+#define VIRTIO_PCI_ABI_VERSION		0
+#endif

include/linux/virtio_ring.h

@@ -15,9 +15,13 @@
 /* This marks a buffer as write-only (otherwise read-only). */
 #define VRING_DESC_F_WRITE	2
 
-/* This means don't notify other side when buffer added. */
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
+ * will still kick if it's out of buffers. */
 #define VRING_USED_F_NO_NOTIFY	1
-/* This means don't interrupt guest when buffer consumed. */
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer.  It's unreliable, so it's simply an
+ * optimization.  */
 #define VRING_AVAIL_F_NO_INTERRUPT	1
 
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
@@ -89,7 +93,7 @@ struct vring {
  * };
  */
 static inline void vring_init(struct vring *vr, unsigned int num, void *p,
-			      unsigned int pagesize)
+			      unsigned long pagesize)
 {
 	vr->num = num;
 	vr->desc = p;
@@ -98,7 +102,7 @@ static inline void vring_init(struct vring *vr, unsigned int num, void *p,
 			    & ~(pagesize - 1));
 }
 
-static inline unsigned vring_size(unsigned int num, unsigned int pagesize)
+static inline unsigned vring_size(unsigned int num, unsigned long pagesize)
 {
 	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (2 + num)
 		 + pagesize - 1) & ~(pagesize - 1))
@@ -114,7 +118,7 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      struct virtio_device *vdev,
 				      void *pages,
 				      void (*notify)(struct virtqueue *vq),
-				      bool (*callback)(struct virtqueue *vq));
+				      void (*callback)(struct virtqueue *vq));
 void vring_del_virtqueue(struct virtqueue *vq);
 
 irqreturn_t vring_interrupt(int irq, void *_vq);

net/9p/trans_virtio.c

@@ -199,14 +199,12 @@ static void p9_virtio_close(struct p9_trans *trans)
 	kfree(trans);
 }
 
-static bool p9_virtio_intr(struct virtqueue *q)
+static void p9_virtio_intr(struct virtqueue *q)
 {
 	struct virtio_chan *chan = q->vdev->priv;
 
 	P9_DPRINTK(P9_DEBUG_TRANS, "9p poll_wakeup: %p\n", &chan->wq);
 	wake_up_interruptible(&chan->wq);
-
-	return true;
 }
 
 static int p9_virtio_probe(struct virtio_device *dev)
@@ -236,13 +234,13 @@ static int p9_virtio_probe(struct virtio_device *dev)
 
 	/* Find the input queue. */
 	dev->priv = chan;
-	chan->in_vq = dev->config->find_vq(dev, p9_virtio_intr);
+	chan->in_vq = dev->config->find_vq(dev, 0, p9_virtio_intr);
 	if (IS_ERR(chan->in_vq)) {
 		err = PTR_ERR(chan->in_vq);
 		goto free;
 	}
 
-	chan->out_vq = dev->config->find_vq(dev, NULL);
+	chan->out_vq = dev->config->find_vq(dev, 1, NULL);
 	if (IS_ERR(chan->out_vq)) {
 		err = PTR_ERR(chan->out_vq);
 		goto free_in_vq;

net/core/skbuff.c

@@ -2461,6 +2461,34 @@ int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer)
 	return elt;
 }
 
+/**
+ * skb_partial_csum_set - set up and verify partial csum values for packet
+ * @skb: the skb to set
+ * @start: the number of bytes after skb->data to start checksumming.
+ * @off: the offset from start to place the checksum.
+ *
+ * For untrusted partially-checksummed packets, we need to make sure the values
+ * for skb->csum_start and skb->csum_offset are valid so we don't oops.
+ *
+ * This function checks and sets those values and skb->ip_summed: if this
+ * returns false you should drop the packet.
+ */
+bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off)
+{
+	if (unlikely(start > skb->len - 2) ||
+	    unlikely((int)start + off > skb->len - 2)) {
+		if (net_ratelimit())
+			printk(KERN_WARNING
+			       "bad partial csum: csum=%u/%u len=%u\n",
+			       start, off, skb->len);
+		return false;
+	}
+	skb->ip_summed = CHECKSUM_PARTIAL;
+	skb->csum_start = skb_headroom(skb) + start;
+	skb->csum_offset = off;
+	return true;
+}
+
 EXPORT_SYMBOL(___pskb_trim);
 EXPORT_SYMBOL(__kfree_skb);
 EXPORT_SYMBOL(kfree_skb);
@@ -2497,3 +2525,4 @@ EXPORT_SYMBOL(skb_append_datato_frags);
 
 EXPORT_SYMBOL_GPL(skb_to_sgvec);
 EXPORT_SYMBOL_GPL(skb_cow_data);
+EXPORT_SYMBOL_GPL(skb_partial_csum_set);