Merge branch 'sja1105-fixes'

Vladimir Oltean says:

====================
Fixes for SJA1105 DSA driver

This series contains some minor fixes in the sja1105 driver:
- improved error handling in the probe path
- rejecting an invalid phy-mode specified in the device tree
- register access fix for SJA1105P/Q/R/S for the virtual links through
  the dynamic reconfiguration interface
- handling 2 bridge VLANs where the second is supposed to overwrite the
  first
- making sure that the lack of a pvid results in the actual dropping of
  untagged traffic
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/sja1105/sja1105_dynamic_config.c

@@ -167,8 +167,9 @@ enum sja1105_hostcmd {
 	SJA1105_HOSTCMD_INVALIDATE = 4,
 };
 
+/* Command and entry overlap */
 static void
-sja1105_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
+sja1105et_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
 				enum packing_op op)
 {
 	const int size = SJA1105_SIZE_DYN_CMD;
@@ -179,6 +180,20 @@ sja1105_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
 	sja1105_packing(buf, &cmd->index,    9,  0, size, op);
 }
 
+/* Command and entry are separate */
+static void
+sja1105pqrs_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
+				  enum packing_op op)
+{
+	u8 *p = buf + SJA1105_SIZE_VL_LOOKUP_ENTRY;
+	const int size = SJA1105_SIZE_DYN_CMD;
+
+	sja1105_packing(p, &cmd->valid,   31, 31, size, op);
+	sja1105_packing(p, &cmd->errors,  30, 30, size, op);
+	sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op);
+	sja1105_packing(p, &cmd->index,    9,  0, size, op);
+}
+
 static size_t sja1105et_vl_lookup_entry_packing(void *buf, void *entry_ptr,
 						enum packing_op op)
 {
@@ -641,7 +656,7 @@ static size_t sja1105pqrs_cbs_entry_packing(void *buf, void *entry_ptr,
 const struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = {
 	[BLK_IDX_VL_LOOKUP] = {
 		.entry_packing = sja1105et_vl_lookup_entry_packing,
-		.cmd_packing = sja1105_vl_lookup_cmd_packing,
+		.cmd_packing = sja1105et_vl_lookup_cmd_packing,
 		.access = OP_WRITE,
 		.max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT,
 		.packed_size = SJA1105ET_SIZE_VL_LOOKUP_DYN_CMD,
@@ -725,7 +740,7 @@ const struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = {
 const struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = {
 	[BLK_IDX_VL_LOOKUP] = {
 		.entry_packing = sja1105_vl_lookup_entry_packing,
-		.cmd_packing = sja1105_vl_lookup_cmd_packing,
+		.cmd_packing = sja1105pqrs_vl_lookup_cmd_packing,
 		.access = (OP_READ | OP_WRITE),
 		.max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT,
 		.packed_size = SJA1105PQRS_SIZE_VL_LOOKUP_DYN_CMD,

drivers/net/dsa/sja1105/sja1105_main.c

@@ -26,6 +26,7 @@
 #include "sja1105_tas.h"
 
 #define SJA1105_UNKNOWN_MULTICAST	0x010000000000ull
+#define SJA1105_DEFAULT_VLAN		(VLAN_N_VID - 1)
 
 static const struct dsa_switch_ops sja1105_switch_ops;
 
@@ -207,6 +208,7 @@ static int sja1105_init_mii_settings(struct sja1105_private *priv,
 		default:
 			dev_err(dev, "Unsupported PHY mode %s!\n",
 				phy_modes(ports[i].phy_mode));
+			return -EINVAL;
 		}
 
 		/* Even though the SerDes port is able to drive SGMII autoneg
@@ -321,6 +323,13 @@ static int sja1105_init_l2_lookup_params(struct sja1105_private *priv)
 	return 0;
 }
 
+/* Set up a default VLAN for untagged traffic injected from the CPU
+ * using management routes (e.g. STP, PTP) as opposed to tag_8021q.
+ * All DT-defined ports are members of this VLAN, and there are no
+ * restrictions on forwarding (since the CPU selects the destination).
+ * Frames from this VLAN will always be transmitted as untagged, and
+ * neither the bridge nor the 8021q module cannot create this VLAN ID.
+ */
 static int sja1105_init_static_vlan(struct sja1105_private *priv)
 {
 	struct sja1105_table *table;
@@ -330,17 +339,13 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv)
 		.vmemb_port = 0,
 		.vlan_bc = 0,
 		.tag_port = 0,
-		.vlanid = 1,
+		.vlanid = SJA1105_DEFAULT_VLAN,
 	};
 	struct dsa_switch *ds = priv->ds;
 	int port;
 
 	table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP];
 
-	/* The static VLAN table will only contain the initial pvid of 1.
-	 * All other VLANs are to be configured through dynamic entries,
-	 * and kept in the static configuration table as backing memory.
-	 */
 	if (table->entry_count) {
 		kfree(table->entries);
 		table->entry_count = 0;
@@ -353,9 +358,6 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv)
 
 	table->entry_count = 1;
 
-	/* VLAN 1: all DT-defined ports are members; no restrictions on
-	 * forwarding; always transmit as untagged.
-	 */
 	for (port = 0; port < ds->num_ports; port++) {
 		struct sja1105_bridge_vlan *v;
 
@@ -366,15 +368,12 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv)
 		pvid.vlan_bc |= BIT(port);
 		pvid.tag_port &= ~BIT(port);
 
-		/* Let traffic that don't need dsa_8021q (e.g. STP, PTP) be
-		 * transmitted as untagged.
-		 */
 		v = kzalloc(sizeof(*v), GFP_KERNEL);
 		if (!v)
 			return -ENOMEM;
 
 		v->port = port;
-		v->vid = 1;
+		v->vid = SJA1105_DEFAULT_VLAN;
 		v->untagged = true;
 		if (dsa_is_cpu_port(ds, port))
 			v->pvid = true;
@@ -2817,12 +2816,23 @@ static int sja1105_vlan_add_one(struct dsa_switch *ds, int port, u16 vid,
 	bool pvid = flags & BRIDGE_VLAN_INFO_PVID;
 	struct sja1105_bridge_vlan *v;
 
-	list_for_each_entry(v, vlan_list, list)
-		if (v->port == port && v->vid == vid &&
-		    v->untagged == untagged && v->pvid == pvid)
+	list_for_each_entry(v, vlan_list, list) {
+		if (v->port == port && v->vid == vid) {
 			/* Already added */
+			if (v->untagged == untagged && v->pvid == pvid)
+				/* Nothing changed */
 				return 0;
 
+			/* It's the same VLAN, but some of the flags changed
+			 * and the user did not bother to delete it first.
+			 * Update it and trigger sja1105_build_vlan_table.
+			 */
+			v->untagged = untagged;
+			v->pvid = pvid;
+			return 1;
+		}
+	}
+
 	v = kzalloc(sizeof(*v), GFP_KERNEL);
 	if (!v) {
 		dev_err(ds->dev, "Out of memory while storing VLAN\n");
@@ -2976,13 +2986,13 @@ static int sja1105_setup(struct dsa_switch *ds)
 	rc = sja1105_static_config_load(priv, ports);
 	if (rc < 0) {
 		dev_err(ds->dev, "Failed to load static config: %d\n", rc);
-		return rc;
+		goto out_ptp_clock_unregister;
 	}
 	/* Configure the CGU (PHY link modes and speeds) */
 	rc = sja1105_clocking_setup(priv);
 	if (rc < 0) {
 		dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc);
-		return rc;
+		goto out_static_config_free;
 	}
 	/* On SJA1105, VLAN filtering per se is always enabled in hardware.
 	 * The only thing we can do to disable it is lie about what the 802.1Q
@@ -3003,7 +3013,7 @@ static int sja1105_setup(struct dsa_switch *ds)
 
 	rc = sja1105_devlink_setup(ds);
 	if (rc < 0)
-		return rc;
+		goto out_static_config_free;
 
 	/* The DSA/switchdev model brings up switch ports in standalone mode by
 	 * default, and that means vlan_filtering is 0 since they're not under
@@ -3012,6 +3022,17 @@ static int sja1105_setup(struct dsa_switch *ds)
 	rtnl_lock();
 	rc = sja1105_setup_8021q_tagging(ds, true);
 	rtnl_unlock();
+	if (rc)
+		goto out_devlink_teardown;
+
+	return 0;
+
+out_devlink_teardown:
+	sja1105_devlink_teardown(ds);
+out_ptp_clock_unregister:
+	sja1105_ptp_clock_unregister(ds);
+out_static_config_free:
+	sja1105_static_config_free(&priv->static_config);
 
 	return rc;
 }
@@ -3646,8 +3667,10 @@ static int sja1105_probe(struct spi_device *spi)
 		priv->cbs = devm_kcalloc(dev, priv->info->num_cbs_shapers,
 					 sizeof(struct sja1105_cbs_entry),
 					 GFP_KERNEL);
-		if (!priv->cbs)
-			return -ENOMEM;
+		if (!priv->cbs) {
+			rc = -ENOMEM;
+			goto out_unregister_switch;
+		}
 	}
 
 	/* Connections between dsa_port and sja1105_port */
@@ -3672,7 +3695,7 @@ static int sja1105_probe(struct spi_device *spi)
 			dev_err(ds->dev,
 				"failed to create deferred xmit thread: %d\n",
 				rc);
-			goto out;
+			goto out_destroy_workers;
 		}
 		skb_queue_head_init(&sp->xmit_queue);
 		sp->xmit_tpid = ETH_P_SJA1105;
@@ -3682,7 +3705,8 @@ static int sja1105_probe(struct spi_device *spi)
 	}
 
 	return 0;
-out:
+
+out_destroy_workers:
 	while (port-- > 0) {
 		struct sja1105_port *sp = &priv->ports[port];
 
@@ -3691,6 +3715,10 @@ static int sja1105_probe(struct spi_device *spi)
 
 		kthread_destroy_worker(sp->xmit_worker);
 	}
+
+out_unregister_switch:
+	dsa_unregister_switch(ds);
+
 	return rc;
 }