ath9k: Update AR9485 initvals

HW peak detect calibration would fail for AR9300 chips and
we went for implementing the SW way of doing it instead of
HW doing the peak detect calibration.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath9k/ar9485_initvals.h

@@ -1026,7 +1026,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
 	{0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec80d2e, 0x7ec80d2e},
 	{0x00009e14, 0x31395d53, 0x31396053, 0x312e6053, 0x312e5d53},
 	{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
-	{0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
+	{0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946220, 0xcf946220},
 	{0x00009e48, 0x5030201a, 0x5030201a, 0x50302010, 0x50302010},
 	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
 	{0x0000a204, 0x01303fc0, 0x01303fc4, 0x01303fc4, 0x01303fc0},
@@ -1044,7 +1044,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
 	{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
 	{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+	{0x0000a2c4, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18},
 	{0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
 	{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
 	{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},