arm64: dts: qcom: msm8998: Move qfprom iospace to calibrated values

The QFPROM iospace was (erroneously, I believe) set to the uncalibrated
fuse start address, but every driver only needs - and will always only
need - only calibrated values.

Move the iospace forward to the calibrated values start to avoid
offsetting every fuse definition.
Obviously, the only defined fuse (qusb2_hstx_trim) was also fixed to
remove the offset, in order to comply with this change.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-4-angelogioacchino.delregno@somainline.org

arch/arm64/boot/dts/qcom/msm8998.dtsi

@@ -870,14 +870,14 @@ rpm_msg_ram: memory@778000 {
 			reg = <0x00778000 0x7000>;
 		};
 
-		qfprom: qfprom@780000 {
+		qfprom: qfprom@784000 {
 			compatible = "qcom,qfprom";
-			reg = <0x00780000 0x621c>;
+			reg = <0x00784000 0x621c>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			qusb2_hstx_trim: hstx-trim@423a {
-				reg = <0x423a 0x1>;
+			qusb2_hstx_trim: hstx-trim@23a {
+				reg = <0x23a 0x1>;
 				bits = <0 4>;
 			};
 		};