Commit 947570e8 authored by Greg Bowers's avatar Greg Bowers Committed by Jeff Kirsher

i40e: Add support for non-willing Apps

Adds support for setting a new bit in the Set Local LLDP MIB AQ command
Type field.  When set to 1, the bit indicates to FW that Apps should be
treated as non-willing.  When 0, FW behaves as before.

Change-ID: I0d2101c1606c59c7188d3e6a0c7810e0f205233a
Signed-off-by: default avatarGreg Bowers <gregory.j.bowers@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 1cdfd88f
...@@ -2132,6 +2132,13 @@ I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_get_cee_dcb_cfg_resp); ...@@ -2132,6 +2132,13 @@ I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_get_cee_dcb_cfg_resp);
struct i40e_aqc_lldp_set_local_mib { struct i40e_aqc_lldp_set_local_mib {
#define SET_LOCAL_MIB_AC_TYPE_DCBX_SHIFT 0 #define SET_LOCAL_MIB_AC_TYPE_DCBX_SHIFT 0
#define SET_LOCAL_MIB_AC_TYPE_DCBX_MASK (1 << SET_LOCAL_MIB_AC_TYPE_DCBX_SHIFT) #define SET_LOCAL_MIB_AC_TYPE_DCBX_MASK (1 << SET_LOCAL_MIB_AC_TYPE_DCBX_SHIFT)
#define SET_LOCAL_MIB_AC_TYPE_DCBX_MASK (1 << \
SET_LOCAL_MIB_AC_TYPE_DCBX_SHIFT)
#define SET_LOCAL_MIB_AC_TYPE_LOCAL_MIB 0x0
#define SET_LOCAL_MIB_AC_TYPE_NON_WILLING_APPS_SHIFT (1)
#define SET_LOCAL_MIB_AC_TYPE_NON_WILLING_APPS_MASK (1 << \
SET_LOCAL_MIB_AC_TYPE_NON_WILLING_APPS_SHIFT)
#define SET_LOCAL_MIB_AC_TYPE_NON_WILLING_APPS 0x1
u8 type; u8 type;
u8 reserved0; u8 reserved0;
__le16 length; __le16 length;
......
...@@ -475,6 +475,8 @@ struct i40e_dcbx_config { ...@@ -475,6 +475,8 @@ struct i40e_dcbx_config {
u8 dcbx_mode; u8 dcbx_mode;
#define I40E_DCBX_MODE_CEE 0x1 #define I40E_DCBX_MODE_CEE 0x1
#define I40E_DCBX_MODE_IEEE 0x2 #define I40E_DCBX_MODE_IEEE 0x2
u8 app_mode;
#define I40E_DCBX_APPS_NON_WILLING 0x1
u32 numapps; u32 numapps;
u32 tlv_status; /* CEE mode TLV status */ u32 tlv_status; /* CEE mode TLV status */
struct i40e_dcb_ets_config etscfg; struct i40e_dcb_ets_config etscfg;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment