Commit 947d9cf5 authored by Viresh Kumar's avatar Viresh Kumar

ARM/dc21285-timer: Migrate to new 'set-state' interface

Migrate footbridge driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
parent bc660a45
......@@ -57,24 +57,19 @@ static int ckevt_dc21285_set_next_event(unsigned long delta,
return 0;
}
static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
struct clock_event_device *c)
static int ckevt_dc21285_shutdown(struct clock_event_device *c)
{
*CSR_TIMER1_CNTL = 0;
return 0;
}
static int ckevt_dc21285_set_periodic(struct clock_event_device *c)
{
switch (mode) {
case CLOCK_EVT_MODE_RESUME:
case CLOCK_EVT_MODE_PERIODIC:
*CSR_TIMER1_CLR = 0;
*CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
TIMER_CNTL_DIV16;
break;
case CLOCK_EVT_MODE_ONESHOT:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
*CSR_TIMER1_CNTL = 0;
break;
}
return 0;
}
static struct clock_event_device ckevt_dc21285 = {
......@@ -84,7 +79,10 @@ static struct clock_event_device ckevt_dc21285 = {
.rating = 200,
.irq = IRQ_TIMER1,
.set_next_event = ckevt_dc21285_set_next_event,
.set_mode = ckevt_dc21285_set_mode,
.set_state_shutdown = ckevt_dc21285_shutdown,
.set_state_periodic = ckevt_dc21285_set_periodic,
.set_state_oneshot = ckevt_dc21285_shutdown,
.tick_resume = ckevt_dc21285_set_periodic,
};
static irqreturn_t timer1_interrupt(int irq, void *dev_id)
......@@ -94,7 +92,7 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
*CSR_TIMER1_CLR = 0;
/* Stop the timer if in one-shot mode */
if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
if (clockevent_state_oneshot(ce))
*CSR_TIMER1_CNTL = 0;
ce->event_handler(ce);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment