Commit 947f4417 authored by Lucas De Marchi's avatar Lucas De Marchi

drm/i915/skl: use previous pll hw readout

By the time skl_ddi_clock_get() is called - and thus
skl_calc_wrpll_link() - we've just got the hw state from the pll
registers. We don't need to read them again: we can rather reuse what
was cached in the dpll_hw_state.

v2: rename state variable to pll_state, make argument const in
    skl_calc_wrpll_link() and remove not useful warning (from Ville)
Signed-off-by: default avatarLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-2-lucas.demarchi@intel.com
parent 602cbe8e
......@@ -1240,24 +1240,15 @@ static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
return (refclk * n * 100) / (p * r);
}
static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
enum intel_dpll_id pll_id)
static int skl_calc_wrpll_link(const struct intel_dpll_hw_state *pll_state)
{
i915_reg_t cfgcr1_reg, cfgcr2_reg;
u32 cfgcr1_val, cfgcr2_val;
u32 p0, p1, p2, dco_freq;
cfgcr1_reg = DPLL_CFGCR1(pll_id);
cfgcr2_reg = DPLL_CFGCR2(pll_id);
cfgcr1_val = I915_READ(cfgcr1_reg);
cfgcr2_val = I915_READ(cfgcr2_reg);
p0 = cfgcr2_val & DPLL_CFGCR2_PDIV_MASK;
p2 = cfgcr2_val & DPLL_CFGCR2_KDIV_MASK;
p0 = pll_state->cfgcr2 & DPLL_CFGCR2_PDIV_MASK;
p2 = pll_state->cfgcr2 & DPLL_CFGCR2_KDIV_MASK;
if (cfgcr2_val & DPLL_CFGCR2_QDIV_MODE(1))
p1 = (cfgcr2_val & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8;
if (pll_state->cfgcr2 & DPLL_CFGCR2_QDIV_MODE(1))
p1 = (pll_state->cfgcr2 & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8;
else
p1 = 1;
......@@ -1292,10 +1283,11 @@ static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
break;
}
dco_freq = (cfgcr1_val & DPLL_CFGCR1_DCO_INTEGER_MASK) * 24 * 1000;
dco_freq = (pll_state->cfgcr1 & DPLL_CFGCR1_DCO_INTEGER_MASK)
* 24 * 1000;
dco_freq += (((cfgcr1_val & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) * 24 *
1000) / 0x8000;
dco_freq += (((pll_state->cfgcr1 & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9)
* 24 * 1000) / 0x8000;
if (WARN_ON(p0 == 0 || p1 == 0 || p2 == 0))
return 0;
......@@ -1546,20 +1538,18 @@ static void cnl_ddi_clock_get(struct intel_encoder *encoder,
static void skl_ddi_clock_get(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
int link_clock = 0;
u32 dpll_ctl1;
enum intel_dpll_id pll_id;
struct intel_dpll_hw_state *pll_state = &pipe_config->dpll_hw_state;
int link_clock;
pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
dpll_ctl1 = I915_READ(DPLL_CTRL1);
if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(pll_id)) {
link_clock = skl_calc_wrpll_link(dev_priv, pll_id);
/*
* ctrl1 register is already shifted for each pll, just use 0 to get
* the internal shift for each field
*/
if (pll_state->ctrl1 & DPLL_CTRL1_HDMI_MODE(0)) {
link_clock = skl_calc_wrpll_link(pll_state);
} else {
link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(pll_id);
link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(pll_id);
link_clock = pll_state->ctrl1 & DPLL_CTRL1_LINK_RATE_MASK(0);
link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(0);
switch (link_clock) {
case DPLL_CTRL1_LINK_RATE_810:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment