Commit 948b707d authored by Manivannan Sadhasivam's avatar Manivannan Sadhasivam Committed by Jonathan Cameron

iio:temperature: Add support for TI TMP007 sensor

This patch adds support for TI TMP007 - 16 bit IR thermopile sensor with integrated Math engine.
Sensor takes care of calculating the object temperature with the help of calibrated constants stored in non-volatile memory,
thereby reducing the calculation overhead.
Signed-off-by: default avatarManivannan Sadhasivam <manivannanece23@gmail.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent e30eca0e
* TI TMP007 - IR thermopile sensor with integrated math engine
Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf
Required properties:
- compatible: should be "ti,tmp007"
- reg: the I2C address of the sensor (changeable via ADR pins)
------------------------------
|ADR1 | ADR0 | Device Address|
------------------------------
0 0 0x40
0 1 0x41
0 SDA 0x42
0 SCL 0x43
1 0 0x44
1 1 0x45
1 SDA 0x46
1 SCL 0x47
Example:
tmp007@40 {
compatible = "ti,tmp007";
reg = <0x40>;
};
...@@ -39,6 +39,16 @@ config TMP006 ...@@ -39,6 +39,16 @@ config TMP006
This driver can also be built as a module. If so, the module will This driver can also be built as a module. If so, the module will
be called tmp006. be called tmp006.
config TMP007
tristate "TMP007 infrared thermopile sensor with Integrated Math Engine"
depends on I2C
help
If you say yes here you get support for the Texas Instruments
TMP007 infrared thermopile sensor with Integrated Math Engine.
This driver can also be built as a module. If so, the module will
be called tmp007.
config TSYS01 config TSYS01
tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection" tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
depends on I2C depends on I2C
......
...@@ -5,5 +5,6 @@ ...@@ -5,5 +5,6 @@
obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
obj-$(CONFIG_MLX90614) += mlx90614.o obj-$(CONFIG_MLX90614) += mlx90614.o
obj-$(CONFIG_TMP006) += tmp006.o obj-$(CONFIG_TMP006) += tmp006.o
obj-$(CONFIG_TMP007) += tmp007.o
obj-$(CONFIG_TSYS01) += tsys01.o obj-$(CONFIG_TSYS01) += tsys01.o
obj-$(CONFIG_TSYS02D) += tsys02d.o obj-$(CONFIG_TSYS02D) += tsys02d.o
/*
* tmp007.c - Support for TI TMP007 IR thermopile sensor with integrated math engine
*
* Copyright (c) 2017 Manivannan Sadhasivam <manivannanece23@gmail.com>
*
* This file is subject to the terms and conditions of version 2 of
* the GNU General Public License. See the file COPYING in the main
* directory of this archive for more details.
*
* Driver for the Texas Instruments I2C 16-bit IR thermopile sensor
*
* (7-bit I2C slave address (0x40 - 0x47), changeable via ADR pins)
*
* Note: This driver assumes that the sensor has been calibrated beforehand
*
* TODO: ALERT irq, limit threshold events
*
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/bitops.h>
#include <linux/of.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define TMP007_TDIE 0x01
#define TMP007_CONFIG 0x02
#define TMP007_TOBJECT 0x03
#define TMP007_STATUS 0x04
#define TMP007_STATUS_MASK 0x05
#define TMP007_MANUFACTURER_ID 0x1e
#define TMP007_DEVICE_ID 0x1f
#define TMP007_CONFIG_CONV_EN BIT(12)
#define TMP007_CONFIG_COMP_EN BIT(5)
#define TMP007_CONFIG_TC_EN BIT(6)
#define TMP007_CONFIG_CR_MASK GENMASK(11, 9)
#define TMP007_CONFIG_CR_SHIFT 9
#define TMP007_STATUS_CONV_READY BIT(14)
#define TMP007_STATUS_DATA_VALID BIT(9)
#define TMP007_MANUFACTURER_MAGIC 0x5449
#define TMP007_DEVICE_MAGIC 0x0078
#define TMP007_TEMP_SHIFT 2
struct tmp007_data {
struct i2c_client *client;
u16 config;
};
static const int tmp007_avgs[5][2] = { {4, 0}, {2, 0}, {1, 0},
{0, 500000}, {0, 250000} };
static int tmp007_read_temperature(struct tmp007_data *data, u8 reg)
{
s32 ret;
int tries = 50;
while (tries-- > 0) {
ret = i2c_smbus_read_word_swapped(data->client,
TMP007_STATUS);
if (ret < 0)
return ret;
if ((ret & TMP007_STATUS_CONV_READY) &&
!(ret & TMP007_STATUS_DATA_VALID))
break;
msleep(100);
}
if (tries < 0)
return -EIO;
return i2c_smbus_read_word_swapped(data->client, reg);
}
static int tmp007_powerdown(struct tmp007_data *data)
{
return i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
data->config & ~TMP007_CONFIG_CONV_EN);
}
static int tmp007_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *channel, int *val,
int *val2, long mask)
{
struct tmp007_data *data = iio_priv(indio_dev);
s32 ret;
int conv_rate;
switch (mask) {
case IIO_CHAN_INFO_RAW:
switch (channel->channel2) {
case IIO_MOD_TEMP_AMBIENT: /* LSB: 0.03125 degree Celsius */
ret = i2c_smbus_read_word_swapped(data->client, TMP007_TDIE);
if (ret < 0)
return ret;
break;
case IIO_MOD_TEMP_OBJECT:
ret = tmp007_read_temperature(data, TMP007_TOBJECT);
if (ret < 0)
return ret;
break;
default:
return -EINVAL;
}
*val = sign_extend32(ret, 15) >> TMP007_TEMP_SHIFT;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 31;
*val2 = 250000;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
conv_rate = (data->config & TMP007_CONFIG_CR_MASK)
>> TMP007_CONFIG_CR_SHIFT;
*val = tmp007_avgs[conv_rate][0];
*val2 = tmp007_avgs[conv_rate][1];
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
}
static int tmp007_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *channel, int val,
int val2, long mask)
{
struct tmp007_data *data = iio_priv(indio_dev);
int i;
u16 tmp;
if (mask == IIO_CHAN_INFO_SAMP_FREQ) {
for (i = 0; i < ARRAY_SIZE(tmp007_avgs); i++) {
if ((val == tmp007_avgs[i][0]) &&
(val2 == tmp007_avgs[i][1])) {
tmp = data->config & ~TMP007_CONFIG_CR_MASK;
tmp |= (i << TMP007_CONFIG_CR_SHIFT);
return i2c_smbus_write_word_swapped(data->client,
TMP007_CONFIG,
data->config = tmp);
}
}
}
return -EINVAL;
}
static IIO_CONST_ATTR(sampling_frequency_available, "4 2 1 0.5 0.25");
static struct attribute *tmp007_attributes[] = {
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
NULL
};
static const struct attribute_group tmp007_attribute_group = {
.attrs = tmp007_attributes,
};
static const struct iio_chan_spec tmp007_channels[] = {
{
.type = IIO_TEMP,
.modified = 1,
.channel2 = IIO_MOD_TEMP_AMBIENT,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
},
{
.type = IIO_TEMP,
.modified = 1,
.channel2 = IIO_MOD_TEMP_OBJECT,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
}
};
static const struct iio_info tmp007_info = {
.read_raw = tmp007_read_raw,
.write_raw = tmp007_write_raw,
.attrs = &tmp007_attribute_group,
.driver_module = THIS_MODULE,
};
static bool tmp007_identify(struct i2c_client *client)
{
int manf_id, dev_id;
manf_id = i2c_smbus_read_word_swapped(client, TMP007_MANUFACTURER_ID);
if (manf_id < 0)
return false;
dev_id = i2c_smbus_read_word_swapped(client, TMP007_DEVICE_ID);
if (dev_id < 0)
return false;
return (manf_id == TMP007_MANUFACTURER_MAGIC && dev_id == TMP007_DEVICE_MAGIC);
}
static int tmp007_probe(struct i2c_client *client,
const struct i2c_device_id *tmp007_id)
{
struct tmp007_data *data;
struct iio_dev *indio_dev;
int ret;
u16 status;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -EOPNOTSUPP;
if (!tmp007_identify(client)) {
dev_err(&client->dev, "TMP007 not found\n");
return -ENODEV;
}
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
data->client = client;
indio_dev->dev.parent = &client->dev;
indio_dev->name = dev_name(&client->dev);
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &tmp007_info;
indio_dev->channels = tmp007_channels;
indio_dev->num_channels = ARRAY_SIZE(tmp007_channels);
/*
* Set Configuration register:
* 1. Conversion ON
* 2. Comparator mode
* 3. Transient correction enable
*/
ret = i2c_smbus_read_word_swapped(data->client, TMP007_CONFIG);
if (ret < 0)
return ret;
data->config = ret;
data->config |= (TMP007_CONFIG_CONV_EN | TMP007_CONFIG_COMP_EN | TMP007_CONFIG_TC_EN);
ret = i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
data->config);
if (ret < 0)
return ret;
/*
* Set Status Mask register:
* 1. Conversion ready enable
* 2. Data valid enable
*/
ret = i2c_smbus_read_word_swapped(data->client, TMP007_STATUS_MASK);
if (ret < 0)
goto error_powerdown;
status = ret;
status |= (TMP007_STATUS_CONV_READY | TMP007_STATUS_DATA_VALID);
ret = i2c_smbus_write_word_swapped(data->client, TMP007_STATUS_MASK, status);
if (ret < 0)
goto error_powerdown;
return iio_device_register(indio_dev);
error_powerdown:
tmp007_powerdown(data);
return ret;
}
static int tmp007_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct tmp007_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
tmp007_powerdown(data);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int tmp007_suspend(struct device *dev)
{
struct tmp007_data *data = iio_priv(i2c_get_clientdata(
to_i2c_client(dev)));
return tmp007_powerdown(data);
}
static int tmp007_resume(struct device *dev)
{
struct tmp007_data *data = iio_priv(i2c_get_clientdata(
to_i2c_client(dev)));
return i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
data->config | TMP007_CONFIG_CONV_EN);
}
#endif
static SIMPLE_DEV_PM_OPS(tmp007_pm_ops, tmp007_suspend, tmp007_resume);
static const struct of_device_id tmp007_of_match[] = {
{ .compatible = "ti,tmp007", },
{ },
};
MODULE_DEVICE_TABLE(of, tmp007_of_match);
static const struct i2c_device_id tmp007_id[] = {
{ "tmp007", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp007_id);
static struct i2c_driver tmp007_driver = {
.driver = {
.name = "tmp007",
.of_match_table = of_match_ptr(tmp007_of_match),
.pm = &tmp007_pm_ops,
},
.probe = tmp007_probe,
.remove = tmp007_remove,
.id_table = tmp007_id,
};
module_i2c_driver(tmp007_driver);
MODULE_AUTHOR("Manivannan Sadhasivam <manivannanece23@gmail.com>");
MODULE_DESCRIPTION("TI TMP007 IR thermopile sensor driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment