Fix several bugs in DL2K Gigabit Ethernet driver, updating to

vendor revision 1.08.
Contributed by the vendor, D-Link.

Documentation/networking/dl2k.txt

 
     D-Link DL2000-based Gigabit Ethernet Adapter Installation
     for Linux
-    Nov 12, 2001
+    Jan 02, 2002
 
 Contents
 ========
@@ -182,7 +182,7 @@ driver.
 mtu=packet_size			- Specifies the maximum packet size. default
 				  is 1500.
 
-media=xxxxxxxxx			- Specifies the media type the NIC operates at.
+media=media_type		- Specifies the media type the NIC operates at.
 				  autosense	Autosensing active media.
 				  10mbps_hd	10Mbps half duplex.
 				  10mbps_fd	10Mbps full duplex.
@@ -195,28 +195,41 @@ media=xxxxxxxxx			- Specifies the media type the NIC operates at.
 				  2		10Mbps full duplex.
 				  3		100Mbps half duplex.
 				  4		100Mbps full duplex.
-				  5          	1000Mbps full duplex.
-				  6          	1000Mbps half duplex.
+				  5          	1000Mbps half duplex.
+				  6          	1000Mbps full duplex.
 
 				  By default, the NIC operates at autosense.
 				  Note that only 1000mbps_fd and 1000mbps_hd
 				  types are available for fiber adapter.
 
-vlan=x				- Specifies the VLAN ID. If vlan=0, the
+vlan=[0|1]			- Specifies the VLAN ID. If vlan=0, the
 				  Virtual Local Area Network (VLAN) function is
 				  disable.
 
-jumbo=x				- Specifies the jumbo frame support. If jumbo=1,
+jumbo=[0|1]			- Specifies the jumbo frame support. If jumbo=1,
 				  the NIC accept jumbo frames. By default, this
 				  function is disabled.
 				  Jumbo frame usually improve the performance
 				  int gigabit.
 				  
-int_count			- Rx frame count each interrupt.
-int_timeout			- Rx DMA wait time for an interrupt. Proper 
-				  values of int_count and int_timeout bring 
+rx_coalesce=n			- Rx frame count each interrupt.
+rx_timeout=n			- Rx DMA wait time for an interrupt. Proper 
+				  values of rx_coalesce and rx_timeout bring 
 				  a conspicuous performance in the fast machine.
-				  Ex. int_count=5 and int_timeout=750 
+				  Ex. rx_coalesce=5 and rx_timeout=750 
+
+tx_coalesce=n			- Tx transmit count each TxComp interrupt.
+				  Setting value larger than 1 will improve 
+				  performance, but this is possible to lower 
+				  stability in slow UP machines. By default, 
+				  tx_coalesce=1. (dl2k)
+				  
+tx_flow=[1|0]			- Specifies the Tx flow control. If tx_flow=1, 
+				  the Tx flow control enable.
+				  
+rx_flow=[1|0]			- Specifies the Rx flow control. If rx_flow=1, 
+				  the Rx flow control enable.
+
 
 Configuration Script Sample
 ===========================

drivers/net/dl2k.h

@@ -34,7 +34,7 @@
 #include <linux/spinlock.h>
 #include <linux/time.h>
 #define TX_RING_SIZE	128
-#define TX_QUEUE_LEN	96	/* Limit ring entries actually used.  */
+#define TX_QUEUE_LEN	120	/* Limit ring entries actually used.  */
 #define RX_RING_SIZE 	128
 #define TX_TOTAL_SIZE	TX_RING_SIZE*sizeof(struct netdev_desc)
 #define RX_TOTAL_SIZE	RX_RING_SIZE*sizeof(struct netdev_desc)
@@ -183,12 +183,12 @@ enum IntStatus_bits {
 
 /* Bits in the ReceiveMode register. */
 enum ReceiveMode_bits {
-	ReceiveIPMulticast = 0x0020,
-	ReceiveMulticastHash = 0x0010,
-	ReceiveAllFrames = 0x0008,
-	ReceiveBroadcast = 0x0004,
-	ReceiveMulticast = 0x0002,
 	ReceiveUnicast = 0x0001,
+	ReceiveMulticast = 0x0002,
+	ReceiveBroadcast = 0x0004,
+	ReceiveAllFrames = 0x0008,
+	ReceiveMulticastHash = 0x0010,
+	ReceiveIPMulticast = 0x0020,
 	ReceiveVLANMatch = 0x0100,
 	ReceiveVLANHash = 0x0200,
 };
@@ -654,8 +654,8 @@ struct netdev_private {
 	unsigned int speed;		/* Operating speed */
 	unsigned int vlan;		/* VLAN Id */
 	unsigned int chip_id;		/* PCI table chip id */
-	unsigned int int_count; /* Maximum frames each RxDMAComplete intr */
-	unsigned int int_timeout; /* Wait time between RxDMAComplete intr */
+	unsigned int rx_coalesce; 	/* Maximum frames each RxDMAComplete intr */
+	unsigned int rx_timeout; 	/* Wait time between RxDMAComplete intr */
 	unsigned int tx_full:1;		/* The Tx queue is full. */
 	unsigned int full_duplex:1;	/* Full-duplex operation requested. */
 	unsigned int an_enable:2;	/* Auto-Negotiated Enable */
@@ -698,7 +698,12 @@ static struct pci_device_id rio_pci_tbl[] __devinitdata = {
 MODULE_DEVICE_TABLE (pci, rio_pci_tbl);
 #define TX_TIMEOUT  (4*HZ)
 #define PACKET_SIZE		1536
+#define MAX_JUMBO		8000
 #define RIO_IO_SIZE             340
+#define DEFAULT_RXC		5
+#define DEFAULT_RXT		750
+#define DEFAULT_TXC		1
+#define MAX_TXC			8
 #ifdef RIO_DEBUG
 #define DEBUG_TFD_DUMP(x) debug_tfd_dump(x)
 #define DEBUG_RFD_DUMP(x,flag) debug_rfd_dump(x,flag)