Commit 94b4f3ba authored by Chris Wilson's avatar Chris Wilson

drm/i915: Split out runtime configuration of device info to its own file

Let's reclaim a few hundred lines from i915_drv.c by splitting out the
runtime configuration of the "constant" dev_priv->info.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: default avatarMatthew Auld <matthew.auld@intel.com>
parent 9777cca0
......@@ -14,6 +14,7 @@ i915-y := i915_drv.o \
i915_suspend.o \
i915_sysfs.o \
intel_csr.o \
intel_device_info.o \
intel_pm.o \
intel_runtime_pm.o
......
......@@ -748,394 +748,6 @@ static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
}
#endif
static void i915_dump_device_info(struct drm_i915_private *dev_priv)
{
const struct intel_device_info *info = &dev_priv->info;
#define PRINT_S(name) "%s"
#define SEP_EMPTY
#define PRINT_FLAG(name) info->name ? #name "," : ""
#define SEP_COMMA ,
DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
info->gen,
dev_priv->dev->pdev->device,
dev_priv->dev->pdev->revision,
DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
#undef PRINT_S
#undef SEP_EMPTY
#undef PRINT_FLAG
#undef SEP_COMMA
}
static void cherryview_sseu_info_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_device_info *info;
u32 fuse, eu_dis;
info = (struct intel_device_info *)&dev_priv->info;
fuse = I915_READ(CHV_FUSE_GT);
info->slice_total = 1;
if (!(fuse & CHV_FGT_DISABLE_SS0)) {
info->subslice_per_slice++;
eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
CHV_FGT_EU_DIS_SS0_R1_MASK);
info->eu_total += 8 - hweight32(eu_dis);
}
if (!(fuse & CHV_FGT_DISABLE_SS1)) {
info->subslice_per_slice++;
eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
CHV_FGT_EU_DIS_SS1_R1_MASK);
info->eu_total += 8 - hweight32(eu_dis);
}
info->subslice_total = info->subslice_per_slice;
/*
* CHV expected to always have a uniform distribution of EU
* across subslices.
*/
info->eu_per_subslice = info->subslice_total ?
info->eu_total / info->subslice_total :
0;
/*
* CHV supports subslice power gating on devices with more than
* one subslice, and supports EU power gating on devices with
* more than one EU pair per subslice.
*/
info->has_slice_pg = 0;
info->has_subslice_pg = (info->subslice_total > 1);
info->has_eu_pg = (info->eu_per_subslice > 2);
}
static void gen9_sseu_info_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_device_info *info;
int s_max = 3, ss_max = 4, eu_max = 8;
int s, ss;
u32 fuse2, s_enable, ss_disable, eu_disable;
u8 eu_mask = 0xff;
info = (struct intel_device_info *)&dev_priv->info;
fuse2 = I915_READ(GEN8_FUSE2);
s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
GEN8_F2_S_ENA_SHIFT;
ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
GEN9_F2_SS_DIS_SHIFT;
info->slice_total = hweight32(s_enable);
/*
* The subslice disable field is global, i.e. it applies
* to each of the enabled slices.
*/
info->subslice_per_slice = ss_max - hweight32(ss_disable);
info->subslice_total = info->slice_total *
info->subslice_per_slice;
/*
* Iterate through enabled slices and subslices to
* count the total enabled EU.
*/
for (s = 0; s < s_max; s++) {
if (!(s_enable & (0x1 << s)))
/* skip disabled slice */
continue;
eu_disable = I915_READ(GEN9_EU_DISABLE(s));
for (ss = 0; ss < ss_max; ss++) {
int eu_per_ss;
if (ss_disable & (0x1 << ss))
/* skip disabled subslice */
continue;
eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
eu_mask);
/*
* Record which subslice(s) has(have) 7 EUs. we
* can tune the hash used to spread work among
* subslices if they are unbalanced.
*/
if (eu_per_ss == 7)
info->subslice_7eu[s] |= 1 << ss;
info->eu_total += eu_per_ss;
}
}
/*
* SKL is expected to always have a uniform distribution
* of EU across subslices with the exception that any one
* EU in any one subslice may be fused off for die
* recovery. BXT is expected to be perfectly uniform in EU
* distribution.
*/
info->eu_per_subslice = info->subslice_total ?
DIV_ROUND_UP(info->eu_total,
info->subslice_total) : 0;
/*
* SKL supports slice power gating on devices with more than
* one slice, and supports EU power gating on devices with
* more than one EU pair per subslice. BXT supports subslice
* power gating on devices with more than one subslice, and
* supports EU power gating on devices with more than one EU
* pair per subslice.
*/
info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
(info->slice_total > 1));
info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
info->has_eu_pg = (info->eu_per_subslice > 2);
if (IS_BROXTON(dev)) {
#define IS_SS_DISABLED(_ss_disable, ss) (_ss_disable & (0x1 << ss))
/*
* There is a HW issue in 2x6 fused down parts that requires
* Pooled EU to be enabled as a WA. The pool configuration
* changes depending upon which subslice is fused down. This
* doesn't affect if the device has all 3 subslices enabled.
*/
/* WaEnablePooledEuFor2x6:bxt */
info->has_pooled_eu = ((info->subslice_per_slice == 3) ||
(info->subslice_per_slice == 2 &&
INTEL_REVID(dev) < BXT_REVID_C0));
info->min_eu_in_pool = 0;
if (info->has_pooled_eu) {
if (IS_SS_DISABLED(ss_disable, 0) ||
IS_SS_DISABLED(ss_disable, 2))
info->min_eu_in_pool = 3;
else if (IS_SS_DISABLED(ss_disable, 1))
info->min_eu_in_pool = 6;
else
info->min_eu_in_pool = 9;
}
#undef IS_SS_DISABLED
}
}
static void broadwell_sseu_info_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_device_info *info;
const int s_max = 3, ss_max = 3, eu_max = 8;
int s, ss;
u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
fuse2 = I915_READ(GEN8_FUSE2);
s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
(32 - GEN8_EU_DIS0_S1_SHIFT));
eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
(32 - GEN8_EU_DIS1_S2_SHIFT));
info = (struct intel_device_info *)&dev_priv->info;
info->slice_total = hweight32(s_enable);
/*
* The subslice disable field is global, i.e. it applies
* to each of the enabled slices.
*/
info->subslice_per_slice = ss_max - hweight32(ss_disable);
info->subslice_total = info->slice_total * info->subslice_per_slice;
/*
* Iterate through enabled slices and subslices to
* count the total enabled EU.
*/
for (s = 0; s < s_max; s++) {
if (!(s_enable & (0x1 << s)))
/* skip disabled slice */
continue;
for (ss = 0; ss < ss_max; ss++) {
u32 n_disabled;
if (ss_disable & (0x1 << ss))
/* skip disabled subslice */
continue;
n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
/*
* Record which subslices have 7 EUs.
*/
if (eu_max - n_disabled == 7)
info->subslice_7eu[s] |= 1 << ss;
info->eu_total += eu_max - n_disabled;
}
}
/*
* BDW is expected to always have a uniform distribution of EU across
* subslices with the exception that any one EU in any one subslice may
* be fused off for die recovery.
*/
info->eu_per_subslice = info->subslice_total ?
DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
/*
* BDW supports slice power gating on devices with more than
* one slice.
*/
info->has_slice_pg = (info->slice_total > 1);
info->has_subslice_pg = 0;
info->has_eu_pg = 0;
}
/*
* Determine various intel_device_info fields at runtime.
*
* Use it when either:
* - it's judged too laborious to fill n static structures with the limit
* when a simple if statement does the job,
* - run-time checks (eg read fuse/strap registers) are needed.
*
* This function needs to be called:
* - after the MMIO has been setup as we are reading registers,
* - after the PCH has been detected,
* - before the first usage of the fields it can tweak.
*/
static void intel_device_info_runtime_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_device_info *info;
enum pipe pipe;
info = (struct intel_device_info *)&dev_priv->info;
/*
* Skylake and Broxton currently don't expose the topmost plane as its
* use is exclusive with the legacy cursor and we only want to expose
* one of those, not both. Until we can safely expose the topmost plane
* as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
* we don't expose the topmost plane at all to prevent ABI breakage
* down the line.
*/
if (IS_BROXTON(dev)) {
info->num_sprites[PIPE_A] = 2;
info->num_sprites[PIPE_B] = 2;
info->num_sprites[PIPE_C] = 1;
} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
for_each_pipe(dev_priv, pipe)
info->num_sprites[pipe] = 2;
else
for_each_pipe(dev_priv, pipe)
info->num_sprites[pipe] = 1;
if (i915.disable_display) {
DRM_INFO("Display disabled (module parameter)\n");
info->num_pipes = 0;
} else if (info->num_pipes > 0 &&
(IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
HAS_PCH_SPLIT(dev)) {
u32 fuse_strap = I915_READ(FUSE_STRAP);
u32 sfuse_strap = I915_READ(SFUSE_STRAP);
/*
* SFUSE_STRAP is supposed to have a bit signalling the display
* is fused off. Unfortunately it seems that, at least in
* certain cases, fused off display means that PCH display
* reads don't land anywhere. In that case, we read 0s.
*
* On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
* should be set when taking over after the firmware.
*/
if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
(dev_priv->pch_type == PCH_CPT &&
!(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
DRM_INFO("Display fused off, disabling\n");
info->num_pipes = 0;
} else if (fuse_strap & IVB_PIPE_C_DISABLE) {
DRM_INFO("PipeC fused off\n");
info->num_pipes -= 1;
}
} else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
u32 dfsm = I915_READ(SKL_DFSM);
u8 disabled_mask = 0;
bool invalid;
int num_bits;
if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
disabled_mask |= BIT(PIPE_A);
if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
disabled_mask |= BIT(PIPE_B);
if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
disabled_mask |= BIT(PIPE_C);
num_bits = hweight8(disabled_mask);
switch (disabled_mask) {
case BIT(PIPE_A):
case BIT(PIPE_B):
case BIT(PIPE_A) | BIT(PIPE_B):
case BIT(PIPE_A) | BIT(PIPE_C):
invalid = true;
break;
default:
invalid = false;
}
if (num_bits > info->num_pipes || invalid)
DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
disabled_mask);
else
info->num_pipes -= num_bits;
}
/* Initialize slice/subslice/EU info */
if (IS_CHERRYVIEW(dev))
cherryview_sseu_info_init(dev);
else if (IS_BROADWELL(dev))
broadwell_sseu_info_init(dev);
else if (INTEL_INFO(dev)->gen >= 9)
gen9_sseu_info_init(dev);
info->has_snoop = !info->has_llc;
/* Snooping is broken on BXT A stepping. */
if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
info->has_snoop = false;
DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
DRM_DEBUG_DRIVER("has slice power gating: %s\n",
info->has_slice_pg ? "y" : "n");
DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
info->has_subslice_pg ? "y" : "n");
DRM_DEBUG_DRIVER("has EU power gating: %s\n",
info->has_eu_pg ? "y" : "n");
i915.enable_execlists =
intel_sanitize_enable_execlists(dev_priv,
i915.enable_execlists);
/*
* i915.enable_ppgtt is read-only, so do an early pass to validate the
* user's requested state against the hardware/driver capabilities. We
* do this now so that we can print out any log messages once rather
* than every time we check intel_enable_ppgtt().
*/
i915.enable_ppgtt =
intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
}
static void intel_init_dpio(struct drm_i915_private *dev_priv)
{
/*
......@@ -1213,7 +825,7 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
return -ENODEV;
/* Setup the write-once "constant" device info */
device_info = (struct intel_device_info *)&dev_priv->info;
device_info = mkwrite_device_info(dev_priv);
memcpy(device_info, match_info, sizeof(*device_info));
device_info->device_id = dev_priv->drm.pdev->device;
......@@ -1254,7 +866,7 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
intel_display_crc_init(&dev_priv->drm);
i915_dump_device_info(dev_priv);
intel_device_info_dump(dev_priv);
/* Not all pre-production machines fall into this category, only the
* very first ones. Almost everything should work, except for maybe
......@@ -1368,6 +980,23 @@ static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
pci_dev_put(dev_priv->bridge_dev);
}
static void intel_sanitize_options(struct drm_i915_private *dev_priv)
{
i915.enable_execlists =
intel_sanitize_enable_execlists(dev_priv,
i915.enable_execlists);
/*
* i915.enable_ppgtt is read-only, so do an early pass to validate the
* user's requested state against the hardware/driver capabilities. We
* do this now so that we can print out any log messages once rather
* than every time we check intel_enable_ppgtt().
*/
i915.enable_ppgtt =
intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
}
/**
* i915_driver_init_hw - setup state requiring device access
* @dev_priv: device private
......@@ -1385,7 +1014,9 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
if (i915_inject_load_failure())
return -ENODEV;
intel_device_info_runtime_init(dev);
intel_device_info_runtime_init(dev_priv);
intel_sanitize_options(dev_priv);
ret = i915_ggtt_init_hw(dev);
if (ret)
......
......@@ -3750,6 +3750,16 @@ static inline void intel_register_dsm_handler(void) { return; }
static inline void intel_unregister_dsm_handler(void) { return; }
#endif /* CONFIG_ACPI */
/* intel_device_info.c */
static inline struct intel_device_info *
mkwrite_device_info(struct drm_i915_private *dev_priv)
{
return (struct intel_device_info *)&dev_priv->info;
}
void intel_device_info_runtime_init(struct drm_i915_private *dev_priv);
void intel_device_info_dump(struct drm_i915_private *dev_priv);
/* modesetting */
extern void intel_modeset_init_hw(struct drm_device *dev);
extern void intel_modeset_init(struct drm_device *dev);
......
/*
* Copyright © 2016 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#include "i915_drv.h"
void intel_device_info_dump(struct drm_i915_private *dev_priv)
{
const struct intel_device_info *info = &dev_priv->info;
#define PRINT_S(name) "%s"
#define SEP_EMPTY
#define PRINT_FLAG(name) info->name ? #name "," : ""
#define SEP_COMMA ,
DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
info->gen,
dev_priv->drm.pdev->device,
dev_priv->drm.pdev->revision,
DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
#undef PRINT_S
#undef SEP_EMPTY
#undef PRINT_FLAG
#undef SEP_COMMA
}
static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv)
{
struct intel_device_info *info = mkwrite_device_info(dev_priv);
u32 fuse, eu_dis;
fuse = I915_READ(CHV_FUSE_GT);
info->slice_total = 1;
if (!(fuse & CHV_FGT_DISABLE_SS0)) {
info->subslice_per_slice++;
eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
CHV_FGT_EU_DIS_SS0_R1_MASK);
info->eu_total += 8 - hweight32(eu_dis);
}
if (!(fuse & CHV_FGT_DISABLE_SS1)) {
info->subslice_per_slice++;
eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
CHV_FGT_EU_DIS_SS1_R1_MASK);
info->eu_total += 8 - hweight32(eu_dis);
}
info->subslice_total = info->subslice_per_slice;
/*
* CHV expected to always have a uniform distribution of EU
* across subslices.
*/
info->eu_per_subslice = info->subslice_total ?
info->eu_total / info->subslice_total :
0;
/*
* CHV supports subslice power gating on devices with more than
* one subslice, and supports EU power gating on devices with
* more than one EU pair per subslice.
*/
info->has_slice_pg = 0;
info->has_subslice_pg = (info->subslice_total > 1);
info->has_eu_pg = (info->eu_per_subslice > 2);
}
static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)
{
struct intel_device_info *info = mkwrite_device_info(dev_priv);
int s_max = 3, ss_max = 4, eu_max = 8;
int s, ss;
u32 fuse2, s_enable, ss_disable, eu_disable;
u8 eu_mask = 0xff;
fuse2 = I915_READ(GEN8_FUSE2);
s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >> GEN9_F2_SS_DIS_SHIFT;
info->slice_total = hweight32(s_enable);
/*
* The subslice disable field is global, i.e. it applies
* to each of the enabled slices.
*/
info->subslice_per_slice = ss_max - hweight32(ss_disable);
info->subslice_total = info->slice_total * info->subslice_per_slice;
/*
* Iterate through enabled slices and subslices to
* count the total enabled EU.
*/
for (s = 0; s < s_max; s++) {
if (!(s_enable & BIT(s)))
/* skip disabled slice */
continue;
eu_disable = I915_READ(GEN9_EU_DISABLE(s));
for (ss = 0; ss < ss_max; ss++) {
int eu_per_ss;
if (ss_disable & BIT(ss))
/* skip disabled subslice */
continue;
eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
eu_mask);
/*
* Record which subslice(s) has(have) 7 EUs. we
* can tune the hash used to spread work among
* subslices if they are unbalanced.
*/
if (eu_per_ss == 7)
info->subslice_7eu[s] |= BIT(ss);
info->eu_total += eu_per_ss;
}
}
/*
* SKL is expected to always have a uniform distribution
* of EU across subslices with the exception that any one
* EU in any one subslice may be fused off for die
* recovery. BXT is expected to be perfectly uniform in EU
* distribution.
*/
info->eu_per_subslice = info->subslice_total ?
DIV_ROUND_UP(info->eu_total,
info->subslice_total) : 0;
/*
* SKL supports slice power gating on devices with more than
* one slice, and supports EU power gating on devices with
* more than one EU pair per subslice. BXT supports subslice
* power gating on devices with more than one subslice, and
* supports EU power gating on devices with more than one EU
* pair per subslice.
*/
info->has_slice_pg =
(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) &&
info->slice_total > 1;
info->has_subslice_pg =
IS_BROXTON(dev_priv) && info->subslice_total > 1;
info->has_eu_pg = info->eu_per_subslice > 2;
if (IS_BROXTON(dev_priv)) {
#define IS_SS_DISABLED(_ss_disable, ss) (_ss_disable & BIT(ss))
/*
* There is a HW issue in 2x6 fused down parts that requires
* Pooled EU to be enabled as a WA. The pool configuration
* changes depending upon which subslice is fused down. This
* doesn't affect if the device has all 3 subslices enabled.
*/
/* WaEnablePooledEuFor2x6:bxt */
info->has_pooled_eu = ((info->subslice_per_slice == 3) ||
(info->subslice_per_slice == 2 &&
INTEL_REVID(dev_priv) < BXT_REVID_C0));
info->min_eu_in_pool = 0;
if (info->has_pooled_eu) {
if (IS_SS_DISABLED(ss_disable, 0) ||
IS_SS_DISABLED(ss_disable, 2))
info->min_eu_in_pool = 3;
else if (IS_SS_DISABLED(ss_disable, 1))
info->min_eu_in_pool = 6;
else
info->min_eu_in_pool = 9;
}
#undef IS_SS_DISABLED
}
}
static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv)
{
struct intel_device_info *info = mkwrite_device_info(dev_priv);
const int s_max = 3, ss_max = 3, eu_max = 8;
int s, ss;
u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
fuse2 = I915_READ(GEN8_FUSE2);
s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
(32 - GEN8_EU_DIS0_S1_SHIFT));
eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
(32 - GEN8_EU_DIS1_S2_SHIFT));
info->slice_total = hweight32(s_enable);
/*
* The subslice disable field is global, i.e. it applies
* to each of the enabled slices.
*/
info->subslice_per_slice = ss_max - hweight32(ss_disable);
info->subslice_total = info->slice_total * info->subslice_per_slice;
/*
* Iterate through enabled slices and subslices to
* count the total enabled EU.
*/
for (s = 0; s < s_max; s++) {
if (!(s_enable & (0x1 << s)))
/* skip disabled slice */
continue;
for (ss = 0; ss < ss_max; ss++) {
u32 n_disabled;
if (ss_disable & (0x1 << ss))
/* skip disabled subslice */
continue;
n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
/*
* Record which subslices have 7 EUs.
*/
if (eu_max - n_disabled == 7)
info->subslice_7eu[s] |= 1 << ss;
info->eu_total += eu_max - n_disabled;
}
}
/*
* BDW is expected to always have a uniform distribution of EU across
* subslices with the exception that any one EU in any one subslice may
* be fused off for die recovery.
*/
info->eu_per_subslice = info->subslice_total ?
DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
/*
* BDW supports slice power gating on devices with more than
* one slice.
*/
info->has_slice_pg = (info->slice_total > 1);
info->has_subslice_pg = 0;
info->has_eu_pg = 0;
}
/*
* Determine various intel_device_info fields at runtime.
*
* Use it when either:
* - it's judged too laborious to fill n static structures with the limit
* when a simple if statement does the job,
* - run-time checks (eg read fuse/strap registers) are needed.
*
* This function needs to be called:
* - after the MMIO has been setup as we are reading registers,
* - after the PCH has been detected,
* - before the first usage of the fields it can tweak.
*/
void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
{
struct intel_device_info *info = mkwrite_device_info(dev_priv);
enum pipe pipe;
/*
* Skylake and Broxton currently don't expose the topmost plane as its
* use is exclusive with the legacy cursor and we only want to expose
* one of those, not both. Until we can safely expose the topmost plane
* as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
* we don't expose the topmost plane at all to prevent ABI breakage
* down the line.
*/
if (IS_BROXTON(dev_priv)) {
info->num_sprites[PIPE_A] = 2;
info->num_sprites[PIPE_B] = 2;
info->num_sprites[PIPE_C] = 1;
} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
for_each_pipe(dev_priv, pipe)
info->num_sprites[pipe] = 2;
else
for_each_pipe(dev_priv, pipe)
info->num_sprites[pipe] = 1;
if (i915.disable_display) {
DRM_INFO("Display disabled (module parameter)\n");
info->num_pipes = 0;
} else if (info->num_pipes > 0 &&
(IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
HAS_PCH_SPLIT(dev_priv)) {
u32 fuse_strap = I915_READ(FUSE_STRAP);
u32 sfuse_strap = I915_READ(SFUSE_STRAP);
/*
* SFUSE_STRAP is supposed to have a bit signalling the display
* is fused off. Unfortunately it seems that, at least in
* certain cases, fused off display means that PCH display
* reads don't land anywhere. In that case, we read 0s.
*
* On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
* should be set when taking over after the firmware.
*/
if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
(dev_priv->pch_type == PCH_CPT &&
!(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
DRM_INFO("Display fused off, disabling\n");
info->num_pipes = 0;
} else if (fuse_strap & IVB_PIPE_C_DISABLE) {
DRM_INFO("PipeC fused off\n");
info->num_pipes -= 1;
}
} else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
u32 dfsm = I915_READ(SKL_DFSM);
u8 disabled_mask = 0;
bool invalid;
int num_bits;
if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
disabled_mask |= BIT(PIPE_A);
if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
disabled_mask |= BIT(PIPE_B);
if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
disabled_mask |= BIT(PIPE_C);
num_bits = hweight8(disabled_mask);
switch (disabled_mask) {
case BIT(PIPE_A):
case BIT(PIPE_B):
case BIT(PIPE_A) | BIT(PIPE_B):
case BIT(PIPE_A) | BIT(PIPE_C):
invalid = true;
break;
default:
invalid = false;
}
if (num_bits > info->num_pipes || invalid)
DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
disabled_mask);
else
info->num_pipes -= num_bits;
}
/* Initialize slice/subslice/EU info */
if (IS_CHERRYVIEW(dev_priv))
cherryview_sseu_info_init(dev_priv);
else if (IS_BROADWELL(dev_priv))
broadwell_sseu_info_init(dev_priv);
else if (INTEL_INFO(dev_priv)->gen >= 9)
gen9_sseu_info_init(dev_priv);
info->has_snoop = !info->has_llc;
/* Snooping is broken on BXT A stepping. */
if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_A1))
info->has_snoop = false;
DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
DRM_DEBUG_DRIVER("has slice power gating: %s\n",
info->has_slice_pg ? "y" : "n");
DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
info->has_subslice_pg ? "y" : "n");
DRM_DEBUG_DRIVER("has EU power gating: %s\n",
info->has_eu_pg ? "y" : "n");
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment