Merge tag 'qcom-dt-for-4.6' of...

Merge tag 'qcom-dt-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Merge "Qualcomm ARM Based Device Tree Updates for v4.6" from Andy Gross:

* Add documentation for Kryo
* Add RPMCC node for APQ8064
* Updates for MSM8974
* Add board clocks
* Add support for Nexus7 device
* Fixup pmic reg properties
* Various updates/cleanups for APQ8064 based boards

* tag 'qcom-dt-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (23 commits)
  ARM: dts: ifc6410: add correct aliases to the i2c and spi bus
  ARM: dts: apq8064: add i2c6 device node.
  ARM: dts: ifc6410: enable cam i2c device
  ARM: dts: apq8064: add gsbi4 with i2c node.
  ARM: dts: apq8064: add missing i2c2 pinctrl info
  ARM: dts: ifc6410: enable spi device on expansion
  ARM: dts: apq8064: add spi5 device node.
  ARM: dts: apq8064: add i2c sleep pinctrl states.
  ARM: dts: apq8064: add pci support in CM QS600
  ARM: dts: apq8064: move pinctrls to dedicated dtsi
  ARM: dts: qcom: fix i2c lables to be inline with others
  dts: msm8974: Add dma channels for blsp2_i2c1 node
  dts: msm8974: Add blsp2_bam dma node
  ARM: dts: qcom: Remove size elements from pmic reg properties
  devicetree: bindings: Document qcom board compatible format
  devicetree: Add DTS file to support the Nexus7 2013 (flo) device.
  devicetree: qcom-apq8064.dtsi: Add i2c3 address-cells and size-cells values
  arm: dts: qcom: Add more board clocks
  ARM: dts: qcom: msm8974: Add WCNSS SMP2P node
  ARM: dts: qcom: msm8974: Add smsm node
  ...

Documentation/devicetree/bindings/arm/cpus.txt

@@ -178,6 +178,7 @@ nodes to be present and contain the properties described below.
 			    "marvell,sheeva-v5"
 			    "nvidia,tegra132-denver"
 			    "qcom,krait"
+			    "qcom,kryo"
 			    "qcom,scorpion"
 	- enable-method
 		Value type: <stringlist>

Documentation/devicetree/bindings/arm/qcom.txt

+QCOM device tree bindings
+-------------------------
+
+Some qcom based bootloaders identify the dtb blob based on a set of
+device properties like SoC and platform and revisions of those components.
+To support this scheme, we encode this information into the board compatible
+string.
+
+Each board must specify a top-level board compatible string with the following
+format:
+
+	compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]"
+
+The 'SoC' and 'board' elements are required. All other elements are optional.
+
+The 'SoC' element must be one of the following strings:
+
+	apq8016
+	apq8074
+	apq8084
+	apq8096
+	msm8916
+	msm8974
+	msm8996
+
+The 'board' element must be one of the following strings:
+
+	cdp
+	liquid
+	dragonboard
+	mtp
+	sbc
+
+The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
+where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
+as v1. If all versions of the 'board_version' elements match, then a
+wildcard '*' should be used, e.g. 'v*'.
+
+The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9.
+
+Examples:
+
+	"qcom,msm8916-v1-cdp-pm8916-v2.1"
+
+A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version
+2.1.
+
+	"qcom,apq8074-v2.0-2-dragonboard/1-v0.1"
+
+A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
+foundry 2.

arch/arm/boot/dts/Makefile

@@ -533,6 +533,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
 	qcom-apq8064-sony-xperia-yuga.dtb \
+	qcom-apq8064-asus-nexus7-flo.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \

arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts

+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+/ {
+	model = "Asus Nexus7(flo)";
+	compatible = "asus,nexus7-flo", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_3p3v: regulator-fixed@1 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		power {
+			label = "Power";
+			gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+		volume_up {
+			label = "Volume Up";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+		volume_down {
+			label = "Volume Down";
+			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	soc {
+		rpm@108000 {
+			regulators {
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vin_lvs2-supply = <&pm8921_s1>;
+
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				vdd_ncp-supply = <&pm8921_l6>;
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				/* msm otg HSUSB_VDDCX */
+				s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				/*
+				 * msm_sdcc.1-sdc-vdd_io
+				 * tabla2x-slim-CDC_VDDA_RX
+				 * tabla2x-slim-CDC_VDDA_TX
+				 * tabla2x-slim-CDC_VDD_CP
+				 * tabla2x-slim-VDDIO_CDC
+				 */
+				s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <3200000>;
+					regulator-always-on;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				/* mipi_dsi.1-dsi1_pll_vdda */
+				l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				/* msm_otg-HSUSB_3p3 */
+				l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				/* msm_otg-HSUSB_1p8 */
+				l4 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				/* msm_sdcc.1-sdc_vdd */
+				l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				/* mipi_dsi.1-dsi1_avdd */
+				l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				/* pwm_power for backlight */
+				l17 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3600000>;
+					bias-pull-down;
+				};
+
+				/* camera, qdsp6 */
+				l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				/*
+				 * tabla2x-slim-CDC_VDDA_A_1P2V
+				 * tabla2x-slim-VDDD_CDC_D
+				 */
+				l25 {
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs4 {
+					bias-pull-down;
+				};
+
+				lvs5 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+				/*
+				 * mipi_dsi.1-dsi1_vddio
+				 * pil_riva-pll_vdd
+				 */
+				lvs7 {
+					bias-pull-down;
+				};
+			};
+		};
+
+		gsbi@16200000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@16280000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c3_pins>;
+				pinctrl-names = "default";
+
+				trackpad@10 {
+					compatible = "elan,ekth3500";
+					reg = <0x10>;
+					interrupt-parent = <&tlmm_pinmux>;
+					interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+				};
+			};
+		};
+
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+		};
+
+		gsbi@16500000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@16540000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi6_uart_4pins>;
+			};
+		};
+
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+
+		/* OTG */
+		phy@12500000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		gadget@12500000 {
+			status = "okay";
+		};
+
+		/* OTG */
+		usb@12500000 {
+			status = "okay";
+		};
+
+		amba {
+			/* eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts

@@ -37,6 +37,18 @@ mux {
 					bias-disable;
 				};
 			};
+
+			pcie_pins: pcie_pinmux {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+				};
+				conf {
+					pins = "gpio27";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
 		};
 
 		rpm@108000 {
@@ -103,6 +115,11 @@ l23 {
 					regulator-max-microvolt = <1900000>;
 					bias-pull-down;
 				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
 			};
 		};
 
@@ -195,6 +212,16 @@ pios {
 			};
 		};
 
+		pci@1b500000 {
+			status = "ok";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&v3p3_fixed>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {

arch/arm/boot/dts/qcom-apq8064-ifc6410.dts

@@ -9,6 +9,11 @@ / {
 	aliases {
 		serial0 = &gsbi7_serial;
 		serial1 = &gsbi6_serial;
+		i2c0 = &gsbi1_i2c;
+		i2c1 = &gsbi2_i2c;
+		i2c2 = &gsbi3_i2c;
+		i2c3 = &gsbi4_i2c;
+		spi0 = &gsbi5_spi;
 	};
 
 	chosen {
@@ -157,7 +162,16 @@ ext_3p3v: regulator-fixed@1 {
 		gsbi3: gsbi@16200000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
-			i2c3: i2c@16280000 {
+			i2c@16280000 {
+				status = "okay";
+			};
+		};
+
+		gsbi@16300000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			/* CAM I2C MIPI-CSI connector */
+			i2c@16380000 {
 				status = "okay";
 			};
 		};
@@ -178,6 +192,16 @@ eeprom@52 {
 			};
 		};
 
+		gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+			spi4: spi@1a280000 {
+				status = "okay";
+				num-cs = <1>;
+				cs-gpios = <&tlmm_pinmux 53 0>;
+			};
+		};
+
 		gsbi@16500000 {
 			status = "ok";
 			qcom,mode = <GSBI_PROT_UART_W_FC>;

arch/arm/boot/dts/qcom-apq8064-pins.dtsi

+
+&tlmm_pinmux {
+	sdc4_gpios: sdc4-gpios {
+		pios {
+			pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+			function = "sdc4";
+		};
+	};
+
+	ps_hold: ps_hold {
+		mux {
+			pins = "gpio78";
+			function = "ps_hold";
+		};
+	};
+
+	i2c1_pins: i2c1 {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gsbi1";
+		};
+
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_sleep: i2c1_pins_sleep {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gsbi2";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_sleep: i2c2_pins_sleep {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c3_pins: i2c3 {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gsbi3";
+		};
+
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins_sleep: i2c3_pins_sleep {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c4_pins: i2c4 {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gsbi4";
+		};
+
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins_sleep: i2c4_pins_sleep {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	spi5_default: spi5_default {
+		pinmux {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+		};
+
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio53";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio54";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		pinconf_cs {
+			pins = "gpio53";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep: spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c6_pins_sleep: i2c6_pins_sleep {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	gsbi6_uart_2pins: gsbi6_uart_2pins {
+		mux {
+			pins = "gpio14", "gpio15";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi6_uart_4pins: gsbi6_uart_4pins {
+		mux {
+			pins = "gpio14", "gpio15", "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi7_uart_2pins: gsbi7_uart_2pins {
+		mux {
+			pins = "gpio82", "gpio83";
+			function = "gsbi7";
+		};
+	};
+
+	gsbi7_uart_4pins: gsbi7_uart_4pins {
+		mux {
+			pins = "gpio82", "gpio83", "gpio84", "gpio85";
+			function = "gsbi7";
+		};
+	};
+};

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -142,62 +142,6 @@ tlmm_pinmux: pinctrl@800000 {
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&ps_hold>;
-
-			sdc4_gpios: sdc4-gpios {
-				pios {
-					pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-					function = "sdc4";
-				};
-			};
-
-			ps_hold: ps_hold {
-				mux {
-					pins = "gpio78";
-					function = "ps_hold";
-				};
-			};
-
-			i2c1_pins: i2c1 {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "gsbi1";
-				};
-			};
-
-			i2c3_pins: i2c3 {
-				mux {
-					pins = "gpio8", "gpio9";
-					function = "gsbi3";
-				};
-			};
-
-			gsbi6_uart_2pins: gsbi6_uart_2pins {
-				mux {
-					pins = "gpio14", "gpio15";
-					function = "gsbi6";
-				};
-			};
-
-			gsbi6_uart_4pins: gsbi6_uart_4pins {
-				mux {
-					pins = "gpio14", "gpio15", "gpio16", "gpio17";
-					function = "gsbi6";
-				};
-			};
-
-			gsbi7_uart_2pins: gsbi7_uart_2pins {
-				mux {
-					pins = "gpio82", "gpio83";
-					function = "gsbi7";
-				};
-			};
-
-			gsbi7_uart_4pins: gsbi7_uart_4pins {
-				mux {
-					pins = "gpio82", "gpio83", "gpio84", "gpio85";
-					function = "gsbi7";
-				};
-			};
 		};
 
 		sfpb_wrapper_mutex: syscon@1200000 {
@@ -281,10 +225,10 @@ gsbi1: gsbi@12440000 {
 
 			syscon-tcsr = <&tcsr>;
 
-			i2c1: i2c@12460000 {
+			gsbi1_i2c: i2c@12460000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins &i2c1_pins_sleep>;
+				pinctrl-names = "default", "sleep";
 				reg = <0x12460000 0x1000>;
 				interrupts = <0 194 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
@@ -292,6 +236,7 @@ i2c1: i2c@12460000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 		};
 
 		gsbi2: gsbi@12480000 {
@@ -307,9 +252,11 @@ gsbi2: gsbi@12480000 {
 
 			syscon-tcsr = <&tcsr>;
 
-			i2c2: i2c@124a0000 {
+			gsbi2_i2c: i2c@124a0000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x124a0000 0x1000>;
+				pinctrl-0 = <&i2c2_pins &i2c2_pins_sleep>;
+				pinctrl-names = "default", "sleep";
 				interrupts = <0 196 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
@@ -328,15 +275,40 @@ gsbi3: gsbi@16200000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			i2c3: i2c@16280000 {
+			gsbi3_i2c: i2c@16280000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-names = "default";
+				pinctrl-0 = <&i2c3_pins &i2c3_pins_sleep>;
+				pinctrl-names = "default", "sleep";
 				reg = <0x16280000 0x1000>;
 				interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI3_QUP_CLK>,
 					 <&gcc GSBI3_H_CLK>;
 				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x03>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi4_i2c: i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c4_pins &i2c4_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16380000 0x1000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI4_QUP_CLK>,
+					 <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
 			};
 		};
 
@@ -360,6 +332,19 @@ gsbi5_serial: serial@1a240000 {
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
+
+			gsbi5_spi: spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+				pinctrl-0 = <&spi5_default &spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		gsbi6: gsbi@16500000 {
@@ -382,6 +367,17 @@ gsbi6_serial: serial@16540000 {
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c6_pins &i2c6_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI6_QUP_CLK>,
+					 <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+			};
 		};
 
 		gsbi7: gsbi@16600000 {
@@ -521,6 +517,11 @@ rpm@108000 {
 					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
+			rpmcc: clock-controller {
+				compatible	= "qcom,rpmcc-apq8064", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
 			regulators {
 				compatible = "qcom,rpm-pm8921-regulators";
 
@@ -823,3 +824,4 @@ pcie: pci@1b500000 {
 		};
 	};
 };
+#include "qcom-apq8064-pins.dtsi"

arch/arm/boot/dts/qcom-apq8084.dtsi

@@ -91,6 +91,20 @@ cpu-pmu {
 		interrupts = <1 7 0xf04>;
 	};
 
+	clocks {
+		xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 2 0xf08>,

arch/arm/boot/dts/qcom-ipq8064.dtsi

@@ -62,6 +62,18 @@ smem@41000000 {
 	};
 
 	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;

arch/arm/boot/dts/qcom-msm8660.dtsi

@@ -42,6 +42,26 @@ cpu-pmu {
 		interrupts = <1 9 0x304>;
 	};
 
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/qcom-msm8974.dtsi

 /dts-v1/;
 
-#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include "skeleton.dtsi"
 
@@ -14,10 +14,50 @@ reserved-memory {
 		#size-cells = <1>;
 		ranges;
 
+		mpss@08000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
+		};
+
+		mba@00d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
+		};
+
+		reserved@0d200000 {
+			reg = <0x0d200000 0xa00000>;
+			no-map;
+		};
+
+		adsp@0dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
+
+		venus@0f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
 		smem_region: smem@fa00000 {
 			reg = <0xfa00000 0x200000>;
 			no-map;
 		};
+
+		tz@0fc00000 {
+			reg = <0x0fc00000 0x160000>;
+			no-map;
+		};
+
+		efs@0fd600000 {
+			reg = <0x0fd60000 0x1a0000>;
+			no-map;
+		};
+
+		unused@0ff00000 {
+			reg = <0x0ff00000 0x10100000>;
+			no-map;
+		};
 	};
 
 	cpus {
@@ -91,6 +131,20 @@ cpu-pmu {
 		interrupts = <1 7 0xf04>;
 	};
 
+	clocks {
+		xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 2 0xf08>,
@@ -109,6 +163,73 @@ smem {
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-2 = <&apcs 8 9>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		adsp_smsm: adsp@2 {
+			reg = <2>;
+			interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@7 {
+			reg = <7>;
+			interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -339,6 +460,8 @@ blsp_i2c11: i2c@f9967000 {
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
 		};
 
 		spmi_bus: spmi@fc4cf000 {
@@ -356,6 +479,16 @@ spmi_bus: spmi@fc4cf000 {
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
+
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
 	};
 
 	smd {

arch/arm/boot/dts/qcom-pm8841.dtsi

@@ -11,7 +11,7 @@ pm8841_0: pm8841@4 {
 
 		pm8841_mpps: mpps@a000 {
 			compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
-			reg = <0xa000 0x400>;
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
@@ -22,7 +22,7 @@ pm8841_mpps: mpps@a000 {
 
 		temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
 		};
 	};

arch/arm/boot/dts/qcom-pm8941.dtsi

@@ -12,15 +12,15 @@ pm8941_0: pm8941@0 {
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000 0x100>,
-			      <0x6100 0x100>;
+			reg = <0x6000>,
+			      <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		pwrkey@800 {
 			compatible = "qcom,pm8941-pwrkey";
-			reg = <0x800 0x100>;
+			reg = <0x800>;
 			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 			debounce = <15625>;
 			bias-pull-up;
@@ -28,7 +28,7 @@ pwrkey@800 {
 
 		charger@1000 {
 			compatible = "qcom,pm8941-charger";
-			reg = <0x1000 0x700>;
+			reg = <0x1000>;
 			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
 				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
 				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
@@ -49,7 +49,7 @@ charger@1000 {
 
 		pm8941_gpios: gpios@c000 {
 			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
-			reg = <0xc000 0x2400>;
+			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -92,7 +92,7 @@ pm8941_gpios: gpios@c000 {
 
 		pm8941_mpps: mpps@a000 {
 			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
-			reg = <0xa000 0x800>;
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -107,7 +107,7 @@ pm8941_mpps: mpps@a000 {
 
 		pm8941_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
 			io-channel-names = "thermal";
@@ -116,7 +116,7 @@ pm8941_temp: temp-alarm@2400 {
 
 		pm8941_vadc: vadc@3100 {
 			compatible = "qcom,spmi-vadc";
-			reg = <0x3100 0x100>;
+			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -141,7 +141,7 @@ ref_vdd {
 
 		pm8941_iadc: iadc@3600 {
 			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
-			reg = <0x3600 0x100>;
+			reg = <0x3600>;
 			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
 			qcom,external-resistor-micro-ohms = <10000>;
 		};
@@ -161,7 +161,7 @@ pm8941_1: pm8941@1 {
 
 		pm8941_wled: wled@d800 {
 			compatible = "qcom,pm8941-wled";
-			reg = <0xd800 0x100>;
+			reg = <0xd800>;
 			label = "backlight";
 
 			status = "disabled";