Merge tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme into block-6.2

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.2

 - fix  controller shutdown regression in nvme-apple (Janne Grunau)
 - fix a polling on timeout regression in nvme-pci (Keith Busch)"

* tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme:
  nvme-pci: fix timeout request state check
  nvme-apple: only reset the controller when RTKit is running
  nvme-apple: reset controller during shutdown

drivers/nvme/host/apple.c

@@ -829,7 +829,23 @@ static void apple_nvme_disable(struct apple_nvme *anv, bool shutdown)
 			apple_nvme_remove_cq(anv);
 		}
 
+		/*
+		 * Always disable the NVMe controller after shutdown.
+		 * We need to do this to bring it back up later anyway, and we
+		 * can't do it while the firmware is not running (e.g. in the
+		 * resume reset path before RTKit is initialized), so for Apple
+		 * controllers it makes sense to unconditionally do it here.
+		 * Additionally, this sequence of events is reliable, while
+		 * others (like disabling after bringing back the firmware on
+		 * resume) seem to run into trouble under some circumstances.
+		 *
+		 * Both U-Boot and m1n1 also use this convention (i.e. an ANS
+		 * NVMe controller is handed off with firmware shut down, in an
+		 * NVMe disabled state, after a clean shutdown).
+		 */
+		if (shutdown)
 			nvme_disable_ctrl(&anv->ctrl, shutdown);
+		nvme_disable_ctrl(&anv->ctrl, false);
 	}
 
 	WRITE_ONCE(anv->ioq.enabled, false);
@@ -985,11 +1001,11 @@ static void apple_nvme_reset_work(struct work_struct *work)
 		goto out;
 	}
 
-	if (anv->ctrl.ctrl_config & NVME_CC_ENABLE)
-		apple_nvme_disable(anv, false);
-
 	/* RTKit must be shut down cleanly for the (soft)-reset to work */
 	if (apple_rtkit_is_running(anv->rtk)) {
+		/* reset the controller if it is enabled */
+		if (anv->ctrl.ctrl_config & NVME_CC_ENABLE)
+			apple_nvme_disable(anv, false);
 		dev_dbg(anv->dev, "Trying to shut down RTKit before reset.");
 		ret = apple_rtkit_shutdown(anv->rtk);
 		if (ret)

drivers/nvme/host/pci.c

@@ -1362,7 +1362,7 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req)
 	else
 		nvme_poll_irqdisable(nvmeq);
 
-	if (blk_mq_request_completed(req)) {
+	if (blk_mq_rq_state(req) != MQ_RQ_IN_FLIGHT) {
 		dev_warn(dev->ctrl.device,
 			 "I/O %d QID %d timeout, completion polled\n",
 			 req->tag, nvmeq->qid);