Commit 9572594e authored by Radu Bulie's avatar Radu Bulie Committed by David S. Miller

dpaa2-eth: Update dpni_get_single_step_cfg command

dpni_get_single_step_cfg is an MC firmware command used for
retrieving the contents of SINGLE_STEP 1588 register available
in a DPMAC.

This patch adds a new version of this command that returns as an extra
argument the physical base address of the aforementioned register.
The address will be used to directly modify the contents of the
SINGLE_STEP register instead of invoking the MC command
dpni_set_single_step_cgf. The former approach introduced huge delays on
the TX datapath when one step PTP events were transmitted. This led to low
throughput and high latencies observed in the PTP correction field.
Signed-off-by: default avatarRadu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 8a4fc54b
...@@ -98,7 +98,7 @@ ...@@ -98,7 +98,7 @@
#define DPNI_CMDID_GET_LINK_CFG DPNI_CMD(0x278) #define DPNI_CMDID_GET_LINK_CFG DPNI_CMD(0x278)
#define DPNI_CMDID_SET_SINGLE_STEP_CFG DPNI_CMD(0x279) #define DPNI_CMDID_SET_SINGLE_STEP_CFG DPNI_CMD(0x279)
#define DPNI_CMDID_GET_SINGLE_STEP_CFG DPNI_CMD(0x27a) #define DPNI_CMDID_GET_SINGLE_STEP_CFG DPNI_CMD_V2(0x27a)
/* Macros for accessing command fields smaller than 1byte */ /* Macros for accessing command fields smaller than 1byte */
#define DPNI_MASK(field) \ #define DPNI_MASK(field) \
...@@ -658,12 +658,16 @@ struct dpni_cmd_single_step_cfg { ...@@ -658,12 +658,16 @@ struct dpni_cmd_single_step_cfg {
__le16 flags; __le16 flags;
__le16 offset; __le16 offset;
__le32 peer_delay; __le32 peer_delay;
__le32 ptp_onestep_reg_base;
__le32 pad0;
}; };
struct dpni_rsp_single_step_cfg { struct dpni_rsp_single_step_cfg {
__le16 flags; __le16 flags;
__le16 offset; __le16 offset;
__le32 peer_delay; __le32 peer_delay;
__le32 ptp_onestep_reg_base;
__le32 pad0;
}; };
struct dpni_cmd_enable_vlan_filter { struct dpni_cmd_enable_vlan_filter {
......
...@@ -2136,6 +2136,8 @@ int dpni_get_single_step_cfg(struct fsl_mc_io *mc_io, ...@@ -2136,6 +2136,8 @@ int dpni_get_single_step_cfg(struct fsl_mc_io *mc_io,
ptp_cfg->ch_update = dpni_get_field(le16_to_cpu(rsp_params->flags), ptp_cfg->ch_update = dpni_get_field(le16_to_cpu(rsp_params->flags),
PTP_CH_UPDATE) ? 1 : 0; PTP_CH_UPDATE) ? 1 : 0;
ptp_cfg->peer_delay = le32_to_cpu(rsp_params->peer_delay); ptp_cfg->peer_delay = le32_to_cpu(rsp_params->peer_delay);
ptp_cfg->ptp_onestep_reg_base =
le32_to_cpu(rsp_params->ptp_onestep_reg_base);
return err; return err;
} }
......
...@@ -1074,12 +1074,18 @@ int dpni_set_tx_shaping(struct fsl_mc_io *mc_io, ...@@ -1074,12 +1074,18 @@ int dpni_set_tx_shaping(struct fsl_mc_io *mc_io,
* @peer_delay: For peer-to-peer transparent clocks add this value to the * @peer_delay: For peer-to-peer transparent clocks add this value to the
* correction field in addition to the transient time update. * correction field in addition to the transient time update.
* The value expresses nanoseconds. * The value expresses nanoseconds.
* @ptp_onestep_reg_base: 1588 SINGLE_STEP register base address. This address
* is used to update directly the register contents.
* User has to create an address mapping for it.
*
*
*/ */
struct dpni_single_step_cfg { struct dpni_single_step_cfg {
u8 en; u8 en;
u8 ch_update; u8 ch_update;
u16 offset; u16 offset;
u32 peer_delay; u32 peer_delay;
u32 ptp_onestep_reg_base;
}; };
int dpni_set_single_step_cfg(struct fsl_mc_io *mc_io, int dpni_set_single_step_cfg(struct fsl_mc_io *mc_io,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment