Commit 95942742 authored by Tony Lindgren's avatar Tony Lindgren

Merge branch 'crossbar_3.14_rc1' of git://github.com/Sricharanti/sricharan...

Merge branch 'crossbar_3.14_rc1' of git://github.com/Sricharanti/sricharan into omap-for-v3.15/crossbar
parents 38dbfb59 5c61e619
......@@ -50,6 +50,11 @@ Optional
regions, used when the GIC doesn't have banked registers. The offset is
cpu-offset * cpu-nr.
- arm,routable-irqs : Total number of gic irq inputs which are not directly
connected from the peripherals, but are routed dynamically
by a crossbar/multiplexer preceding the GIC. The GIC irq
input line is assigned dynamically when the corresponding
peripheral's crossbar line is mapped.
Example:
intc: interrupt-controller@fff11000 {
......@@ -57,6 +62,7 @@ Example:
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
arm,routable-irqs = <160>;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};
......
Some socs have a large number of interrupts requests to service
the needs of its many peripherals and subsystems. All of the
interrupt lines from the subsystems are not needed at the same
time, so they have to be muxed to the irq-controller appropriately.
In such places a interrupt controllers are preceded by an CROSSBAR
that provides flexibility in muxing the device requests to the controller
inputs.
Required properties:
- compatible : Should be "ti,irq-crossbar"
- reg: Base address and the size of the crossbar registers.
- ti,max-irqs: Total number of irqs available at the interrupt controller.
- ti,reg-size: Size of a individual register in bytes. Every individual
register is assumed to be of same size. Valid sizes are 1, 2, 4.
- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
crossbar. These interrupt lines are reserved in the soc,
so crossbar bar driver should not consider them as free
lines.
Examples:
crossbar_mpu: @4a020000 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
ti,max-irqs = <160>;
ti,reg-size = <2>;
ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
};
......@@ -85,6 +85,7 @@ config SOC_DRA7XX
select CPU_V7
select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
select IRQ_CROSSBAR
config ARCH_OMAP2PLUS
bool
......
......@@ -138,7 +138,7 @@ static void wakeupgen_mask(struct irq_data *d)
unsigned long flags;
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
_wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
......@@ -150,7 +150,7 @@ static void wakeupgen_unmask(struct irq_data *d)
unsigned long flags;
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
_wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
......
......@@ -22,6 +22,7 @@
#include <linux/of_platform.h>
#include <linux/export.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/irqchip/irq-crossbar.h>
#include <linux/of_address.h>
#include <linux/reboot.h>
......@@ -288,5 +289,8 @@ void __init omap_gic_of_init(void)
skip_errata_init:
omap_wakeupgen_init();
#ifdef CONFIG_IRQ_CROSSBAR
irqcrossbar_init();
#endif
irqchip_init();
}
......@@ -69,3 +69,11 @@ config VERSATILE_FPGA_IRQ_NR
config XTENSA_MX
bool
select IRQ_DOMAIN
config IRQ_CROSSBAR
bool
help
Support for a CROSSBAR ip that preceeds the main interrupt controller.
The primary irqchip invokes the crossbar's callback which inturn allocates
a free irq and configures the IP. Thus the peripheral interrupts are
routed to one of the free irqchip interrupt lines.
......@@ -25,3 +25,4 @@ obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o
obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
/*
* drivers/irqchip/irq-crossbar.c
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
* Author: Sricharan R <r.sricharan@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/slab.h>
#include <linux/irqchip/arm-gic.h>
#define IRQ_FREE -1
#define GIC_IRQ_START 32
/*
* @int_max: maximum number of supported interrupts
* @irq_map: array of interrupts to crossbar number mapping
* @crossbar_base: crossbar base address
* @register_offsets: offsets for each irq number
*/
struct crossbar_device {
uint int_max;
uint *irq_map;
void __iomem *crossbar_base;
int *register_offsets;
void (*write) (int, int);
};
static struct crossbar_device *cb;
static inline void crossbar_writel(int irq_no, int cb_no)
{
writel(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
static inline void crossbar_writew(int irq_no, int cb_no)
{
writew(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
static inline void crossbar_writeb(int irq_no, int cb_no)
{
writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
static inline int allocate_free_irq(int cb_no)
{
int i;
for (i = 0; i < cb->int_max; i++) {
if (cb->irq_map[i] == IRQ_FREE) {
cb->irq_map[i] = cb_no;
return i;
}
}
return -ENODEV;
}
static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]);
return 0;
}
static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq)
{
irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq;
if (hw > GIC_IRQ_START)
cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE;
}
static int crossbar_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
unsigned long ret;
ret = allocate_free_irq(intspec[1]);
if (IS_ERR_VALUE(ret))
return ret;
*out_hwirq = ret + GIC_IRQ_START;
return 0;
}
const struct irq_domain_ops routable_irq_domain_ops = {
.map = crossbar_domain_map,
.unmap = crossbar_domain_unmap,
.xlate = crossbar_domain_xlate
};
static int __init crossbar_of_init(struct device_node *node)
{
int i, size, max, reserved = 0, entry;
const __be32 *irqsr;
cb = kzalloc(sizeof(struct cb_device *), GFP_KERNEL);
if (!cb)
return -ENOMEM;
cb->crossbar_base = of_iomap(node, 0);
if (!cb->crossbar_base)
goto err1;
of_property_read_u32(node, "ti,max-irqs", &max);
cb->irq_map = kzalloc(max * sizeof(int), GFP_KERNEL);
if (!cb->irq_map)
goto err2;
cb->int_max = max;
for (i = 0; i < max; i++)
cb->irq_map[i] = IRQ_FREE;
/* Get and mark reserved irqs */
irqsr = of_get_property(node, "ti,irqs-reserved", &size);
if (irqsr) {
size /= sizeof(__be32);
for (i = 0; i < size; i++) {
of_property_read_u32_index(node,
"ti,irqs-reserved",
i, &entry);
if (entry > max) {
pr_err("Invalid reserved entry\n");
goto err3;
}
cb->irq_map[entry] = 0;
}
}
cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL);
if (!cb->register_offsets)
goto err3;
of_property_read_u32(node, "ti,reg-size", &size);
switch (size) {
case 1:
cb->write = crossbar_writeb;
break;
case 2:
cb->write = crossbar_writew;
break;
case 4:
cb->write = crossbar_writel;
break;
default:
pr_err("Invalid reg-size property\n");
goto err4;
break;
}
/*
* Register offsets are not linear because of the
* reserved irqs. so find and store the offsets once.
*/
for (i = 0; i < max; i++) {
if (!cb->irq_map[i])
continue;
cb->register_offsets[i] = reserved;
reserved += size;
}
register_routable_domain_ops(&routable_irq_domain_ops);
return 0;
err4:
kfree(cb->register_offsets);
err3:
kfree(cb->irq_map);
err2:
iounmap(cb->crossbar_base);
err1:
kfree(cb);
return -ENOMEM;
}
static const struct of_device_id crossbar_match[] __initconst = {
{ .compatible = "ti,irq-crossbar" },
{}
};
int __init irqcrossbar_init(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, crossbar_match);
if (!np)
return -ENODEV;
crossbar_of_init(np);
return 0;
}
......@@ -824,16 +824,25 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_set_chip_and_handler(irq, &gic_chip,
handle_fasteoi_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
gic_routable_irq_domain_ops->map(d, irq, hw);
}
irq_set_chip_data(irq, d->host_data);
return 0;
}
static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
{
gic_routable_irq_domain_ops->unmap(d, irq);
}
static int gic_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type)
{
unsigned long ret = 0;
if (d->of_node != controller)
return -EINVAL;
if (intsize < 3)
......@@ -843,11 +852,20 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
*out_hwirq = intspec[1] + 16;
/* For SPIs, we need to add 16 more to get the GIC irq ID number */
if (!intspec[0])
*out_hwirq += 16;
if (!intspec[0]) {
ret = gic_routable_irq_domain_ops->xlate(d, controller,
intspec,
intsize,
out_hwirq,
out_type);
if (IS_ERR_VALUE(ret))
return ret;
}
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
return 0;
return ret;
}
#ifdef CONFIG_SMP
......@@ -871,9 +889,41 @@ static struct notifier_block gic_cpu_notifier = {
const struct irq_domain_ops gic_irq_domain_ops = {
.map = gic_irq_domain_map,
.unmap = gic_irq_domain_unmap,
.xlate = gic_irq_domain_xlate,
};
/* Default functions for routable irq domain */
static int gic_routable_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
return 0;
}
static void gic_routable_irq_domain_unmap(struct irq_domain *d,
unsigned int irq)
{
}
static int gic_routable_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
*out_hwirq += 16;
return 0;
}
const struct irq_domain_ops gic_default_routable_irq_domain_ops = {
.map = gic_routable_irq_domain_map,
.unmap = gic_routable_irq_domain_unmap,
.xlate = gic_routable_irq_domain_xlate,
};
const struct irq_domain_ops *gic_routable_irq_domain_ops =
&gic_default_routable_irq_domain_ops;
void __init gic_init_bases(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base,
u32 percpu_offset, struct device_node *node)
......@@ -881,6 +931,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
irq_hw_number_t hwirq_base;
struct gic_chip_data *gic;
int gic_irqs, irq_base, i;
int nr_routable_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
......@@ -946,14 +997,25 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
gic->gic_irqs = gic_irqs;
gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id());
if (of_property_read_u32(node, "arm,routable-irqs",
&nr_routable_irqs)) {
irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
numa_node_id());
if (IS_ERR_VALUE(irq_base)) {
WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
irq_start);
irq_base = irq_start;
}
gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
hwirq_base, &gic_irq_domain_ops, gic);
} else {
gic->domain = irq_domain_add_linear(node, nr_routable_irqs,
&gic_irq_domain_ops,
gic);
}
if (WARN_ON(!gic->domain))
return;
......
......@@ -93,6 +93,11 @@ int gic_get_cpu_id(unsigned int cpu);
void gic_migrate_target(unsigned int new_cpu_id);
unsigned long gic_get_sgir_physaddr(void);
extern const struct irq_domain_ops *gic_routable_irq_domain_ops;
static inline void __init register_routable_domain_ops
(const struct irq_domain_ops *ops)
{
gic_routable_irq_domain_ops = ops;
}
#endif /* __ASSEMBLY */
#endif
/*
* drivers/irqchip/irq-crossbar.h
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
int irqcrossbar_init(void);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment