remove the broken SKMC driver

The SKMC driver has:
- already been marked as BROKEN in 2.6.0 three years ago and
- is still marked as BROKEN.

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/Kconfig

@@ -1155,21 +1155,6 @@ config SEEQ8005
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called seeq8005.
 
-config SKMC
-	tristate "SKnet MCA support"
-	depends on NET_ETHERNET && MCA && BROKEN
-	---help---
-	  These are Micro Channel Ethernet adapters. You need to say Y to "MCA
-	  support" in order to use this driver.  Supported cards are the SKnet
-	  Junior MC2 and the SKnet MC2(+).  The driver automatically
-	  distinguishes between the two cards. Note that using multiple boards
-	  of different type hasn't been tested with this driver.  Say Y if you
-	  have one of these Ethernet adapters.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
-	  will be called sk_mca.
-
 config NE2_MCA
 	tristate "NE/2 (ne2000 MCA version) support"
 	depends on NET_ETHERNET && MCA_LEGACY

drivers/net/Makefile

@@ -137,7 +137,6 @@ obj-$(CONFIG_AT1700) += at1700.o
 obj-$(CONFIG_EL1) += 3c501.o
 obj-$(CONFIG_EL16) += 3c507.o
 obj-$(CONFIG_ELMC) += 3c523.o
-obj-$(CONFIG_SKMC) += sk_mca.o
 obj-$(CONFIG_IBMLANA) += ibmlana.o
 obj-$(CONFIG_ELMC_II) += 3c527.o
 obj-$(CONFIG_EL3) += 3c509.o

drivers/net/Space.c

@@ -59,7 +59,6 @@ extern struct net_device *wavelan_probe(int unit);
 extern struct net_device *arlan_probe(int unit);
 extern struct net_device *el16_probe(int unit);
 extern struct net_device *elmc_probe(int unit);
-extern struct net_device *skmca_probe(int unit);
 extern struct net_device *elplus_probe(int unit);
 extern struct net_device *ac3200_probe(int unit);
 extern struct net_device *es_probe(int unit);
@@ -152,9 +151,6 @@ static struct devprobe2 mca_probes[] __initdata = {
 #endif
 #ifdef CONFIG_ELMC_II		/* 3c527 */
 	{mc32_probe, 0},
-#endif
-#ifdef CONFIG_SKMC              /* SKnet Microchannel */
-        {skmca_probe, 0},
 #endif
 	{NULL, 0},
 };

drivers/net/sk_mca.h

-#ifndef _SK_MCA_INCLUDE_
-#define _SK_MCA_INCLUDE_
-
-#ifdef _SK_MCA_DRIVER_
-
-/* Adapter ID's */
-#define SKNET_MCA_ID 0x6afd
-#define SKNET_JUNIOR_MCA_ID 0x6be9
-
-/* media enumeration - defined in a way that it fits onto the MC2+'s
-   POS registers... */
-
-typedef enum { Media_10Base2, Media_10BaseT,
-	Media_10Base5, Media_Unknown, Media_Count
-} skmca_medium;
-
-/* private structure */
-typedef struct {
-	unsigned int slot;	/* MCA-Slot-#                       */
-	void __iomem *base;
-	void __iomem *macbase;	/* base address of MAC address PROM */
-	void __iomem *ioregaddr;/* address of I/O-register (Lo)     */
-	void __iomem *ctrladdr;	/* address of control/stat register */
-	void __iomem *cmdaddr;	/* address of I/O-command register  */
-	int nextrx;		/* index of next RX descriptor to
-				   be read                          */
-	int nexttxput;		/* index of next free TX descriptor */
-	int nexttxdone;		/* index of next TX descriptor to
-				   be finished                      */
-	int txbusy;		/* # of busy TX descriptors         */
-	struct net_device_stats stat;	/* packet statistics            */
-	int realirq;		/* memorizes actual IRQ, even when
-				   currently not allocated          */
-	skmca_medium medium;	/* physical cannector               */
-	spinlock_t lock;
-} skmca_priv;
-
-/* card registers: control/status register bits */
-
-#define CTRL_ADR_DATA      0	/* Bit 0 = 0 ->access data register  */
-#define CTRL_ADR_RAP       1	/* Bit 0 = 1 ->access RAP register   */
-#define CTRL_RW_WRITE      0	/* Bit 1 = 0 ->write register        */
-#define CTRL_RW_READ       2	/* Bit 1 = 1 ->read register         */
-#define CTRL_RESET_ON      0	/* Bit 3 = 0 ->reset board           */
-#define CTRL_RESET_OFF     8	/* Bit 3 = 1 ->no reset of board     */
-
-#define STAT_ADR_DATA      0	/* Bit 0 of ctrl register read back  */
-#define STAT_ADR_RAP       1
-#define STAT_RW_WRITE      0	/* Bit 1 of ctrl register read back  */
-#define STAT_RW_READ       2
-#define STAT_RESET_ON      0	/* Bit 3 of ctrl register read back  */
-#define STAT_RESET_OFF     8
-#define STAT_IRQ_ACT       0	/* interrupt pending                 */
-#define STAT_IRQ_NOACT     16	/* no interrupt pending              */
-#define STAT_IO_NOBUSY     0	/* no transfer busy                  */
-#define STAT_IO_BUSY       32	/* transfer busy                     */
-
-/* I/O command register bits */
-
-#define IOCMD_GO           128	/* Bit 7 = 1 -> start register xfer  */
-
-/* LANCE registers */
-
-#define LANCE_CSR0         0	/* Status/Control                    */
-
-#define CSR0_ERR           0x8000	/* general error flag                */
-#define CSR0_BABL          0x4000	/* transmitter timeout               */
-#define CSR0_CERR          0x2000	/* collision error                   */
-#define CSR0_MISS          0x1000	/* lost Rx block                     */
-#define CSR0_MERR          0x0800	/* memory access error               */
-#define CSR0_RINT          0x0400	/* receiver interrupt                */
-#define CSR0_TINT          0x0200	/* transmitter interrupt             */
-#define CSR0_IDON          0x0100	/* initialization done               */
-#define CSR0_INTR          0x0080	/* general interrupt flag            */
-#define CSR0_INEA          0x0040	/* interrupt enable                  */
-#define CSR0_RXON          0x0020	/* receiver enabled                  */
-#define CSR0_TXON          0x0010	/* transmitter enabled               */
-#define CSR0_TDMD          0x0008	/* force transmission now            */
-#define CSR0_STOP          0x0004	/* stop LANCE                        */
-#define CSR0_STRT          0x0002	/* start LANCE                       */
-#define CSR0_INIT          0x0001	/* read initialization block         */
-
-#define LANCE_CSR1         1	/* addr bit 0..15 of initialization  */
-#define LANCE_CSR2         2	/*          16..23 block             */
-
-#define LANCE_CSR3         3	/* Bus control                       */
-#define CSR3_BCON_HOLD     0	/* Bit 0 = 0 -> BM1,BM0,HOLD         */
-#define CSR3_BCON_BUSRQ    1	/* Bit 0 = 1 -> BUSAK0,BYTE,BUSRQ    */
-#define CSR3_ALE_HIGH      0	/* Bit 1 = 0 -> ALE asserted high    */
-#define CSR3_ALE_LOW       2	/* Bit 1 = 1 -> ALE asserted low     */
-#define CSR3_BSWAP_OFF     0	/* Bit 2 = 0 -> no byte swap         */
-#define CSR3_BSWAP_ON      4	/* Bit 2 = 1 -> byte swap            */
-
-/* LANCE structures */
-
-typedef struct {		/* LANCE initialization block        */
-	u16 Mode;		/* mode flags                        */
-	u8 PAdr[6];		/* MAC address                       */
-	u8 LAdrF[8];		/* Multicast filter                  */
-	u32 RdrP;		/* Receive descriptor                */
-	u32 TdrP;		/* Transmit descriptor               */
-} LANCE_InitBlock;
-
-/* Mode flags init block */
-
-#define LANCE_INIT_PROM    0x8000	/* enable promiscous mode            */
-#define LANCE_INIT_INTL    0x0040	/* internal loopback                 */
-#define LANCE_INIT_DRTY    0x0020	/* disable retry                     */
-#define LANCE_INIT_COLL    0x0010	/* force collision                   */
-#define LANCE_INIT_DTCR    0x0008	/* disable transmit CRC              */
-#define LANCE_INIT_LOOP    0x0004	/* loopback                          */
-#define LANCE_INIT_DTX     0x0002	/* disable transmitter               */
-#define LANCE_INIT_DRX     0x0001	/* disable receiver                  */
-
-typedef struct {		/* LANCE Tx descriptor               */
-	u16 LowAddr;		/* bit 0..15 of address              */
-	u16 Flags;		/* bit 16..23 of address + Flags     */
-	u16 Len;		/* 2s complement of packet length    */
-	u16 Status;		/* Result of transmission            */
-} LANCE_TxDescr;
-
-#define TXDSCR_FLAGS_OWN   0x8000	/* LANCE owns descriptor             */
-#define TXDSCR_FLAGS_ERR   0x4000	/* summary error flag                */
-#define TXDSCR_FLAGS_MORE  0x1000	/* more than one retry needed?       */
-#define TXDSCR_FLAGS_ONE   0x0800	/* one retry?                        */
-#define TXDSCR_FLAGS_DEF   0x0400	/* transmission deferred?            */
-#define TXDSCR_FLAGS_STP   0x0200	/* first packet in chain?            */
-#define TXDSCR_FLAGS_ENP   0x0100	/* last packet in chain?             */
-
-#define TXDSCR_STATUS_BUFF 0x8000	/* buffer error?                     */
-#define TXDSCR_STATUS_UFLO 0x4000	/* silo underflow during transmit?   */
-#define TXDSCR_STATUS_LCOL 0x1000	/* late collision?                   */
-#define TXDSCR_STATUS_LCAR 0x0800	/* loss of carrier?                  */
-#define TXDSCR_STATUS_RTRY 0x0400	/* retry error?                      */
-
-typedef struct {		/* LANCE Rx descriptor               */
-	u16 LowAddr;		/* bit 0..15 of address              */
-	u16 Flags;		/* bit 16..23 of address + Flags     */
-	u16 MaxLen;		/* 2s complement of buffer length    */
-	u16 Len;		/* packet length                     */
-} LANCE_RxDescr;
-
-#define RXDSCR_FLAGS_OWN   0x8000	/* LANCE owns descriptor             */
-#define RXDSCR_FLAGS_ERR   0x4000	/* summary error flag                */
-#define RXDSCR_FLAGS_FRAM  0x2000	/* framing error flag                */
-#define RXDSCR_FLAGS_OFLO  0x1000	/* FIFO overflow?                    */
-#define RXDSCR_FLAGS_CRC   0x0800	/* CRC error?                        */
-#define RXDSCR_FLAGS_BUFF  0x0400	/* buffer error?                     */
-#define RXDSCR_FLAGS_STP   0x0200	/* first packet in chain?            */
-#define RXDCSR_FLAGS_ENP   0x0100	/* last packet in chain?             */
-
-/* RAM layout */
-
-#define TXCOUNT            4	/* length of TX descriptor queue     */
-#define LTXCOUNT           2	/* log2 of it                        */
-#define RXCOUNT            4	/* length of RX descriptor queue     */
-#define LRXCOUNT           2	/* log2 of it                        */
-
-#define RAM_INITBASE       0	/* LANCE init block                  */
-#define RAM_TXBASE         24	/* Start of TX descriptor queue      */
-#define RAM_RXBASE         \
-(RAM_TXBASE + (TXCOUNT * 8))	/* Start of RX descriptor queue      */
-#define RAM_DATABASE       \
-(RAM_RXBASE + (RXCOUNT * 8))	/* Start of data area for frames     */
-#define RAM_BUFSIZE        1580	/* max. frame size - should never be
-				   reached                           */
-
-#endif				/* _SK_MCA_DRIVER_ */
-
-#endif	/* _SK_MCA_INCLUDE_ */