docs: networking: convert udplite.txt to ReST

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark lists as such;
- mark tables as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/index.rst

@@ -112,6 +112,7 @@ Contents:
    timestamping
    tproxy
    tuntap
+   udplite
 
 .. only::  subproject and html
 

Documentation/networking/udplite.txt → Documentation/networking/udplite.rst

-  ===========================================================================
-                      The UDP-Lite protocol (RFC 3828)
-  ===========================================================================
+.. SPDX-License-Identifier: GPL-2.0
+
+================================
+The UDP-Lite protocol (RFC 3828)
+================================
 
 
   UDP-Lite is a Standards-Track IETF transport protocol whose characteristic
@@ -11,40 +13,44 @@
   This file briefly describes the existing kernel support and the socket API.
   For in-depth information, you can consult:
 
-   o The UDP-Lite Homepage:
-	http://web.archive.org/web/*/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/ 
+   - The UDP-Lite Homepage:
+     http://web.archive.org/web/%2E/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/
+
      From here you can also download some example application source code.
 
-   o The UDP-Lite HOWTO on
-       http://web.archive.org/web/*/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/
-	files/UDP-Lite-HOWTO.txt
+   - The UDP-Lite HOWTO on
+     http://web.archive.org/web/%2E/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/files/UDP-Lite-HOWTO.txt
 
-   o The Wireshark UDP-Lite WiKi (with capture files):
+   - The Wireshark UDP-Lite WiKi (with capture files):
      https://wiki.wireshark.org/Lightweight_User_Datagram_Protocol
 
-   o The Protocol Spec, RFC 3828, http://www.ietf.org/rfc/rfc3828.txt
+   - The Protocol Spec, RFC 3828, http://www.ietf.org/rfc/rfc3828.txt
 
 
-  I) APPLICATIONS
+1. Applications
+===============
 
   Several applications have been ported successfully to UDP-Lite. Ethereal
   (now called wireshark) has UDP-Litev4/v6 support by default.
+
   Porting applications to UDP-Lite is straightforward: only socket level and
   IPPROTO need to be changed; senders additionally set the checksum coverage
   length (default = header length = 8). Details are in the next section.
 
-
-  II) PROGRAMMING API
+2. Programming API
+==================
 
   UDP-Lite provides a connectionless, unreliable datagram service and hence
   uses the same socket type as UDP. In fact, porting from UDP to UDP-Lite is
-  very easy: simply add `IPPROTO_UDPLITE' as the last argument of the socket(2)
-  call so that the statement looks like:
+  very easy: simply add ``IPPROTO_UDPLITE`` as the last argument of the
+  socket(2) call so that the statement looks like::
 
       s = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDPLITE);
 
   or, respectively,
 
+  ::
+
       s = socket(PF_INET6, SOCK_DGRAM, IPPROTO_UDPLITE);
 
   With just the above change you are able to run UDP-Lite services or connect
@@ -56,7 +62,7 @@
 
     * Sender checksum coverage: UDPLITE_SEND_CSCOV
 
-      For example,
+      For example::
 
 	int val = 20;
 	setsockopt(s, SOL_UDPLITE, UDPLITE_SEND_CSCOV, &val, sizeof(int));
@@ -74,7 +80,7 @@
       that of a traffic filter: when enabled, it instructs the kernel to drop
       all packets which have a coverage _less_ than this value. For example, if
       RTP and UDP headers are to be protected, a receiver can enforce that only
-      packets with a minimum coverage of 20 are admitted:
+      packets with a minimum coverage of 20 are admitted::
 
 	int min = 20;
 	setsockopt(s, SOL_UDPLITE, UDPLITE_RECV_CSCOV, &min, sizeof(int));
@@ -85,8 +91,8 @@
 
   A detailed discussion of UDP-Lite checksum coverage options is in section IV.
 
-
-  III) HEADER FILES
+3. Header Files
+===============
 
   The socket API requires support through header files in /usr/include:
 
@@ -96,7 +102,7 @@
     * /usr/include/netinet/udplite.h
       for UDP-Lite header fields and protocol constants
 
-  For testing purposes, the following can serve as a `mini' header file:
+  For testing purposes, the following can serve as a ``mini`` header file::
 
     #define IPPROTO_UDPLITE       136
     #define SOL_UDPLITE           136
@@ -105,8 +111,9 @@
 
   Ready-made header files for various distros are in the UDP-Lite tarball.
 
+4. Kernel Behaviour with Regards to the Various Socket Options
+==============================================================
 
-  IV) KERNEL BEHAVIOUR WITH REGARD TO THE VARIOUS SOCKET OPTIONS
 
   To enable debugging messages, the log level need to be set to 8, as most
   messages use the KERN_DEBUG level (7).
@@ -136,11 +143,11 @@
   3) Disabling the Checksum Computation
 
   On both sender and receiver, checksumming will always be performed
-  and cannot be disabled using SO_NO_CHECK. Thus
+  and cannot be disabled using SO_NO_CHECK. Thus::
 
 	setsockopt(sockfd, SOL_SOCKET, SO_NO_CHECK,  ... );
 
-  will always will be ignored, while the value of
+  will always will be ignored, while the value of::
 
 	getsockopt(sockfd, SOL_SOCKET, SO_NO_CHECK, &value, ...);
 
@@ -167,12 +174,12 @@
   first one contains the L4 header.
 
   The send buffer size has implications on the checksum coverage length.
-  Consider the following example:
+  Consider the following example::
 
     Payload: 1536 bytes          Send Buffer:     1024 bytes
     MTU:     1500 bytes          Coverage Length:  856 bytes
 
-  UDP-Lite will ship the 1536 bytes in two separate packets:
+  UDP-Lite will ship the 1536 bytes in two separate packets::
 
     Packet 1: 1024 payload + 8 byte header + 20 byte IP header = 1052 bytes
     Packet 2:  512 payload + 8 byte header + 20 byte IP header =  540 bytes
@@ -184,7 +191,7 @@
   length in such cases.
 
   As an example of what happens when one UDP-Lite packet is split into
-  several tiny fragments, consider the following example.
+  several tiny fragments, consider the following example::
 
     Payload: 1024 bytes            Send buffer size: 1024 bytes
     MTU:      300 bytes            Coverage length:   575 bytes
@@ -208,7 +215,7 @@
   lengths), only the first fragment needs to be considered. When using
   larger checksum coverage lengths, each eligible fragment needs to be
   checksummed. Suppose we have a checksum coverage of 3062. The buffer
-  of 3356 bytes will be split into the following fragments:
+  of 3356 bytes will be split into the following fragments::
 
     Fragment 1: 1280 bytes carrying  1232 bytes of UDP-Lite data
     Fragment 2: 1280 bytes carrying  1232 bytes of UDP-Lite data
@@ -222,23 +229,25 @@
   performance over wireless (or generally noisy) links and thus smaller
   coverage lengths are likely to be expected.
 
-
-  V) UDP-LITE RUNTIME STATISTICS AND THEIR MEANING
+5. UDP-Lite Runtime Statistics and their Meaning
+================================================
 
   Exceptional and error conditions are logged to syslog at the KERN_DEBUG
   level.  Live statistics about UDP-Lite are available in /proc/net/snmp
-  and can (with newer versions of netstat) be viewed using
+  and can (with newer versions of netstat) be viewed using::
 
 			    netstat -svu
 
   This displays UDP-Lite statistics variables, whose meaning is as follows.
 
-   InDatagrams:     The total number of datagrams delivered to users.
+   ============     =====================================================
+   InDatagrams      The total number of datagrams delivered to users.
 
-   NoPorts:         Number of packets received to an unknown port.
+   NoPorts          Number of packets received to an unknown port.
 		    These cases are counted separately (not as InErrors).
 
-   InErrors:        Number of erroneous UDP-Lite packets. Errors include:
+   InErrors         Number of erroneous UDP-Lite packets. Errors include:
+
 		      * internal socket queue receive errors
 		      * packet too short (less than 8 bytes or stated
 			coverage length exceeds received length)
@@ -248,31 +257,35 @@
 		      * checksum coverage violated
 		      * bad checksum
 
-   OutDatagrams:    Total number of sent datagrams.
+   OutDatagrams     Total number of sent datagrams.
+   ============     =====================================================
 
    These statistics derive from the UDP MIB (RFC 2013).
 
-
-  VI) IPTABLES
+6. IPtables
+===========
 
   There is packet match support for UDP-Lite as well as support for the LOG target.
-  If you copy and paste the following line into /etc/protocols,
+  If you copy and paste the following line into /etc/protocols::
 
     udplite 136     UDP-Lite        # UDP-Lite [RFC 3828]
 
-  then
+  then::
+
 	      iptables -A INPUT -p udplite -j LOG
 
   will produce logging output to syslog. Dropping and rejecting packets also works.
 
-
-  VII) MAINTAINER ADDRESS
+7. Maintainer Address
+=====================
 
   The UDP-Lite patch was developed at
+
 		    University of Aberdeen
 		    Electronics Research Group
 		    Department of Engineering
 		    Fraser Noble Building
 		    Aberdeen AB24 3UE; UK
+
   The current maintainer is Gerrit Renker, <gerrit@erg.abdn.ac.uk>. Initial
   code was developed by William  Stanislaus, <william@erg.abdn.ac.uk>.