Commit 96286b57 authored by Florian Meier's avatar Florian Meier Committed by Vinod Koul

dmaengine: Add support for BCM2835

Add support for DMA controller of BCM2835 as used in the Raspberry Pi.
Currently it only supports cyclic DMA.
Signed-off-by: default avatarFlorian Meier <florian.meier@koalo.de>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
parent 0adcdeed
* BCM2835 DMA controller
The BCM2835 DMA controller has 16 channels in total.
Only the lower 13 channels have an associated IRQ.
Some arbitrary channels are used by the firmware
(1,3,6,7 in the current firmware version).
The channels 0,2 and 3 have special functionality
and should not be used by the driver.
Required properties:
- compatible: Should be "brcm,bcm2835-dma".
- reg: Should contain DMA registers location and length.
- interrupts: Should contain the DMA interrupts associated
to the DMA channels in ascending order.
- #dma-cells: Must be <1>, the cell in the dmas property of the
client device represents the DREQ number.
- brcm,dma-channel-mask: Bit mask representing the channels
not used by the firmware in ascending order,
i.e. first channel corresponds to LSB.
Example:
dma: dma@7e007000 {
compatible = "brcm,bcm2835-dma";
reg = <0x7e007000 0xf00>;
interrupts = <1 16>,
<1 17>,
<1 18>,
<1 19>,
<1 20>,
<1 21>,
<1 22>,
<1 23>,
<1 24>,
<1 25>,
<1 26>,
<1 27>,
<1 28>;
#dma-cells = <1>;
brcm,dma-channel-mask = <0x7f35>;
};
DMA clients connected to the BCM2835 DMA controller must use the format
described in the dma.txt file, using a two-cell specifier for each channel.
Example:
bcm2835_i2s: i2s@7e203000 {
compatible = "brcm,bcm2835-i2s";
reg = < 0x7e203000 0x20>,
< 0x7e101098 0x02>;
dmas = <&dma 2>,
<&dma 3>;
dma-names = "tx", "rx";
};
......@@ -301,6 +301,12 @@ config DMA_OMAP
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
config DMA_BCM2835
tristate "BCM2835 DMA engine support"
depends on (ARCH_BCM2835 || MACH_BCM2708)
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
config TI_CPPI41
tristate "AM33xx CPPI41 DMA support"
depends on ARCH_OMAP
......
......@@ -38,6 +38,7 @@ obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
obj-$(CONFIG_DMA_OMAP) += omap-dma.o
obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
obj-$(CONFIG_TI_CPPI41) += cppi41.o
......
/*
* BCM2835 DMA engine support
*
* This driver only supports cyclic DMA transfers
* as needed for the I2S module.
*
* Author: Florian Meier <florian.meier@koalo.de>
* Copyright 2013
*
* Based on
* OMAP DMAengine support by Russell King
*
* BCM2708 DMA Driver
* Copyright (C) 2010 Broadcom
*
* Raspberry Pi PCM I2S ALSA Driver
* Copyright (c) by Phil Poole 2013
*
* MARVELL MMP Peripheral DMA Driver
* Copyright 2012 Marvell International Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/of.h>
#include <linux/of_dma.h>
#include "virt-dma.h"
struct bcm2835_dmadev {
struct dma_device ddev;
spinlock_t lock;
void __iomem *base;
struct device_dma_parameters dma_parms;
};
struct bcm2835_dma_cb {
uint32_t info;
uint32_t src;
uint32_t dst;
uint32_t length;
uint32_t stride;
uint32_t next;
uint32_t pad[2];
};
struct bcm2835_chan {
struct virt_dma_chan vc;
struct list_head node;
struct dma_slave_config cfg;
bool cyclic;
unsigned int dreq;
int ch;
struct bcm2835_desc *desc;
void __iomem *chan_base;
int irq_number;
};
struct bcm2835_desc {
struct virt_dma_desc vd;
enum dma_transfer_direction dir;
unsigned int control_block_size;
struct bcm2835_dma_cb *control_block_base;
dma_addr_t control_block_base_phys;
unsigned int frames;
size_t size;
};
#define BCM2835_DMA_CS 0x00
#define BCM2835_DMA_ADDR 0x04
#define BCM2835_DMA_SOURCE_AD 0x0c
#define BCM2835_DMA_DEST_AD 0x10
#define BCM2835_DMA_NEXTCB 0x1C
/* DMA CS Control and Status bits */
#define BCM2835_DMA_ACTIVE BIT(0)
#define BCM2835_DMA_INT BIT(2)
#define BCM2835_DMA_ISPAUSED BIT(4) /* Pause requested or not active */
#define BCM2835_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */
#define BCM2835_DMA_ERR BIT(8)
#define BCM2835_DMA_ABORT BIT(30) /* Stop current CB, go to next, WO */
#define BCM2835_DMA_RESET BIT(31) /* WO, self clearing */
#define BCM2835_DMA_INT_EN BIT(0)
#define BCM2835_DMA_D_INC BIT(4)
#define BCM2835_DMA_D_DREQ BIT(6)
#define BCM2835_DMA_S_INC BIT(8)
#define BCM2835_DMA_S_DREQ BIT(10)
#define BCM2835_DMA_PER_MAP(x) ((x) << 16)
#define BCM2835_DMA_DATA_TYPE_S8 1
#define BCM2835_DMA_DATA_TYPE_S16 2
#define BCM2835_DMA_DATA_TYPE_S32 4
#define BCM2835_DMA_DATA_TYPE_S128 16
#define BCM2835_DMA_BULK_MASK BIT(0)
#define BCM2835_DMA_FIQ_MASK (BIT(2) | BIT(3))
/* Valid only for channels 0 - 14, 15 has its own base address */
#define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */
#define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n))
static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d)
{
return container_of(d, struct bcm2835_dmadev, ddev);
}
static inline struct bcm2835_chan *to_bcm2835_dma_chan(struct dma_chan *c)
{
return container_of(c, struct bcm2835_chan, vc.chan);
}
static inline struct bcm2835_desc *to_bcm2835_dma_desc(
struct dma_async_tx_descriptor *t)
{
return container_of(t, struct bcm2835_desc, vd.tx);
}
static void bcm2835_dma_desc_free(struct virt_dma_desc *vd)
{
struct bcm2835_desc *desc = container_of(vd, struct bcm2835_desc, vd);
dma_free_coherent(desc->vd.tx.chan->device->dev,
desc->control_block_size,
desc->control_block_base,
desc->control_block_base_phys);
kfree(desc);
}
static int bcm2835_dma_abort(void __iomem *chan_base)
{
unsigned long cs;
long int timeout = 10000;
cs = readl(chan_base + BCM2835_DMA_CS);
if (!(cs & BCM2835_DMA_ACTIVE))
return 0;
/* Write 0 to the active bit - Pause the DMA */
writel(0, chan_base + BCM2835_DMA_CS);
/* Wait for any current AXI transfer to complete */
while ((cs & BCM2835_DMA_ISPAUSED) && --timeout) {
cpu_relax();
cs = readl(chan_base + BCM2835_DMA_CS);
}
/* We'll un-pause when we set of our next DMA */
if (!timeout)
return -ETIMEDOUT;
if (!(cs & BCM2835_DMA_ACTIVE))
return 0;
/* Terminate the control block chain */
writel(0, chan_base + BCM2835_DMA_NEXTCB);
/* Abort the whole DMA */
writel(BCM2835_DMA_ABORT | BCM2835_DMA_ACTIVE,
chan_base + BCM2835_DMA_CS);
return 0;
}
static void bcm2835_dma_start_desc(struct bcm2835_chan *c)
{
struct virt_dma_desc *vd = vchan_next_desc(&c->vc);
struct bcm2835_desc *d;
if (!vd) {
c->desc = NULL;
return;
}
list_del(&vd->node);
c->desc = d = to_bcm2835_dma_desc(&vd->tx);
writel(d->control_block_base_phys, c->chan_base + BCM2835_DMA_ADDR);
writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS);
}
static irqreturn_t bcm2835_dma_callback(int irq, void *data)
{
struct bcm2835_chan *c = data;
struct bcm2835_desc *d;
unsigned long flags;
spin_lock_irqsave(&c->vc.lock, flags);
/* Acknowledge interrupt */
writel(BCM2835_DMA_INT, c->chan_base + BCM2835_DMA_CS);
d = c->desc;
if (d) {
/* TODO Only works for cyclic DMA */
vchan_cyclic_callback(&d->vd);
}
/* Keep the DMA engine running */
writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS);
spin_unlock_irqrestore(&c->vc.lock, flags);
return IRQ_HANDLED;
}
static int bcm2835_dma_alloc_chan_resources(struct dma_chan *chan)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
dev_dbg(c->vc.chan.device->dev,
"Allocating DMA channel %d\n", c->ch);
return request_irq(c->irq_number,
bcm2835_dma_callback, 0, "DMA IRQ", c);
}
static void bcm2835_dma_free_chan_resources(struct dma_chan *chan)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
vchan_free_chan_resources(&c->vc);
free_irq(c->irq_number, c);
dev_dbg(c->vc.chan.device->dev, "Freeing DMA channel %u\n", c->ch);
}
static size_t bcm2835_dma_desc_size(struct bcm2835_desc *d)
{
return d->size;
}
static size_t bcm2835_dma_desc_size_pos(struct bcm2835_desc *d, dma_addr_t addr)
{
unsigned int i;
size_t size;
for (size = i = 0; i < d->frames; i++) {
struct bcm2835_dma_cb *control_block =
&d->control_block_base[i];
size_t this_size = control_block->length;
dma_addr_t dma;
if (d->dir == DMA_DEV_TO_MEM)
dma = control_block->dst;
else
dma = control_block->src;
if (size)
size += this_size;
else if (addr >= dma && addr < dma + this_size)
size += dma + this_size - addr;
}
return size;
}
static enum dma_status bcm2835_dma_tx_status(struct dma_chan *chan,
dma_cookie_t cookie, struct dma_tx_state *txstate)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
struct virt_dma_desc *vd;
enum dma_status ret;
unsigned long flags;
ret = dma_cookie_status(chan, cookie, txstate);
if (ret == DMA_COMPLETE || !txstate)
return ret;
spin_lock_irqsave(&c->vc.lock, flags);
vd = vchan_find_desc(&c->vc, cookie);
if (vd) {
txstate->residue =
bcm2835_dma_desc_size(to_bcm2835_dma_desc(&vd->tx));
} else if (c->desc && c->desc->vd.tx.cookie == cookie) {
struct bcm2835_desc *d = c->desc;
dma_addr_t pos;
if (d->dir == DMA_MEM_TO_DEV)
pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD);
else if (d->dir == DMA_DEV_TO_MEM)
pos = readl(c->chan_base + BCM2835_DMA_DEST_AD);
else
pos = 0;
txstate->residue = bcm2835_dma_desc_size_pos(d, pos);
} else {
txstate->residue = 0;
}
spin_unlock_irqrestore(&c->vc.lock, flags);
return ret;
}
static void bcm2835_dma_issue_pending(struct dma_chan *chan)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
unsigned long flags;
c->cyclic = true; /* Nothing else is implemented */
spin_lock_irqsave(&c->vc.lock, flags);
if (vchan_issue_pending(&c->vc) && !c->desc)
bcm2835_dma_start_desc(c);
spin_unlock_irqrestore(&c->vc.lock, flags);
}
static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_transfer_direction direction,
unsigned long flags, void *context)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
enum dma_slave_buswidth dev_width;
struct bcm2835_desc *d;
dma_addr_t dev_addr;
unsigned int es, sync_type;
unsigned int frame;
/* Grab configuration */
if (!is_slave_direction(direction)) {
dev_err(chan->device->dev, "%s: bad direction?\n", __func__);
return NULL;
}
if (direction == DMA_DEV_TO_MEM) {
dev_addr = c->cfg.src_addr;
dev_width = c->cfg.src_addr_width;
sync_type = BCM2835_DMA_S_DREQ;
} else {
dev_addr = c->cfg.dst_addr;
dev_width = c->cfg.dst_addr_width;
sync_type = BCM2835_DMA_D_DREQ;
}
/* Bus width translates to the element size (ES) */
switch (dev_width) {
case DMA_SLAVE_BUSWIDTH_4_BYTES:
es = BCM2835_DMA_DATA_TYPE_S32;
break;
default:
return NULL;
}
/* Now allocate and setup the descriptor. */
d = kzalloc(sizeof(*d), GFP_NOWAIT);
if (!d)
return NULL;
d->dir = direction;
d->frames = buf_len / period_len;
/* Allocate memory for control blocks */
d->control_block_size = d->frames * sizeof(struct bcm2835_dma_cb);
d->control_block_base = dma_zalloc_coherent(chan->device->dev,
d->control_block_size, &d->control_block_base_phys,
GFP_NOWAIT);
if (!d->control_block_base) {
kfree(d);
return NULL;
}
/*
* Iterate over all frames, create a control block
* for each frame and link them together.
*/
for (frame = 0; frame < d->frames; frame++) {
struct bcm2835_dma_cb *control_block =
&d->control_block_base[frame];
/* Setup adresses */
if (d->dir == DMA_DEV_TO_MEM) {
control_block->info = BCM2835_DMA_D_INC;
control_block->src = dev_addr;
control_block->dst = buf_addr + frame * period_len;
} else {
control_block->info = BCM2835_DMA_S_INC;
control_block->src = buf_addr + frame * period_len;
control_block->dst = dev_addr;
}
/* Enable interrupt */
control_block->info |= BCM2835_DMA_INT_EN;
/* Setup synchronization */
if (sync_type != 0)
control_block->info |= sync_type;
/* Setup DREQ channel */
if (c->dreq != 0)
control_block->info |=
BCM2835_DMA_PER_MAP(c->dreq);
/* Length of a frame */
control_block->length = period_len;
d->size += control_block->length;
/*
* Next block is the next frame.
* This DMA engine driver currently only supports cyclic DMA.
* Therefore, wrap around at number of frames.
*/
control_block->next = d->control_block_base_phys +
sizeof(struct bcm2835_dma_cb)
* ((frame + 1) % d->frames);
}
return vchan_tx_prep(&c->vc, &d->vd, flags);
}
static int bcm2835_dma_slave_config(struct bcm2835_chan *c,
struct dma_slave_config *cfg)
{
if ((cfg->direction == DMA_DEV_TO_MEM &&
cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
(cfg->direction == DMA_MEM_TO_DEV &&
cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
!is_slave_direction(cfg->direction)) {
return -EINVAL;
}
c->cfg = *cfg;
return 0;
}
static int bcm2835_dma_terminate_all(struct bcm2835_chan *c)
{
struct bcm2835_dmadev *d = to_bcm2835_dma_dev(c->vc.chan.device);
unsigned long flags;
int timeout = 10000;
LIST_HEAD(head);
spin_lock_irqsave(&c->vc.lock, flags);
/* Prevent this channel being scheduled */
spin_lock(&d->lock);
list_del_init(&c->node);
spin_unlock(&d->lock);
/*
* Stop DMA activity: we assume the callback will not be called
* after bcm_dma_abort() returns (even if it does, it will see
* c->desc is NULL and exit.)
*/
if (c->desc) {
c->desc = NULL;
bcm2835_dma_abort(c->chan_base);
/* Wait for stopping */
while (--timeout) {
if (!(readl(c->chan_base + BCM2835_DMA_CS) &
BCM2835_DMA_ACTIVE))
break;
cpu_relax();
}
if (!timeout)
dev_err(d->ddev.dev, "DMA transfer could not be terminated\n");
}
vchan_get_all_descriptors(&c->vc, &head);
spin_unlock_irqrestore(&c->vc.lock, flags);
vchan_dma_desc_free_list(&c->vc, &head);
return 0;
}
static int bcm2835_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
switch (cmd) {
case DMA_SLAVE_CONFIG:
return bcm2835_dma_slave_config(c,
(struct dma_slave_config *)arg);
case DMA_TERMINATE_ALL:
return bcm2835_dma_terminate_all(c);
default:
return -ENXIO;
}
}
static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, int irq)
{
struct bcm2835_chan *c;
c = devm_kzalloc(d->ddev.dev, sizeof(*c), GFP_KERNEL);
if (!c)
return -ENOMEM;
c->vc.desc_free = bcm2835_dma_desc_free;
vchan_init(&c->vc, &d->ddev);
INIT_LIST_HEAD(&c->node);
d->ddev.chancnt++;
c->chan_base = BCM2835_DMA_CHANIO(d->base, chan_id);
c->ch = chan_id;
c->irq_number = irq;
return 0;
}
static void bcm2835_dma_free(struct bcm2835_dmadev *od)
{
struct bcm2835_chan *c, *next;
list_for_each_entry_safe(c, next, &od->ddev.channels,
vc.chan.device_node) {
list_del(&c->vc.chan.device_node);
tasklet_kill(&c->vc.task);
}
}
static const struct of_device_id bcm2835_dma_of_match[] = {
{ .compatible = "brcm,bcm2835-dma", },
{},
};
MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match);
static struct dma_chan *bcm2835_dma_xlate(struct of_phandle_args *spec,
struct of_dma *ofdma)
{
struct bcm2835_dmadev *d = ofdma->of_dma_data;
struct dma_chan *chan;
chan = dma_get_any_slave_channel(&d->ddev);
if (!chan)
return NULL;
/* Set DREQ from param */
to_bcm2835_dma_chan(chan)->dreq = spec->args[0];
return chan;
}
static int bcm2835_dma_device_slave_caps(struct dma_chan *dchan,
struct dma_slave_caps *caps)
{
caps->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
caps->dstn_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
caps->cmd_pause = false;
caps->cmd_terminate = true;
return 0;
}
static int bcm2835_dma_probe(struct platform_device *pdev)
{
struct bcm2835_dmadev *od;
struct resource *res;
void __iomem *base;
int rc;
int i;
int irq;
uint32_t chans_available;
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (rc)
return rc;
od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL);
if (!od)
return -ENOMEM;
pdev->dev.dma_parms = &od->dma_parms;
dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
od->base = base;
dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask);
od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources;
od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources;
od->ddev.device_tx_status = bcm2835_dma_tx_status;
od->ddev.device_issue_pending = bcm2835_dma_issue_pending;
od->ddev.device_slave_caps = bcm2835_dma_device_slave_caps;
od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic;
od->ddev.device_control = bcm2835_dma_control;
od->ddev.dev = &pdev->dev;
INIT_LIST_HEAD(&od->ddev.channels);
spin_lock_init(&od->lock);
platform_set_drvdata(pdev, od);
/* Request DMA channel mask from device tree */
if (of_property_read_u32(pdev->dev.of_node,
"brcm,dma-channel-mask",
&chans_available)) {
dev_err(&pdev->dev, "Failed to get channel mask\n");
rc = -EINVAL;
goto err_no_dma;
}
/*
* Do not use the FIQ and BULK channels,
* because they are used by the GPU.
*/
chans_available &= ~(BCM2835_DMA_FIQ_MASK | BCM2835_DMA_BULK_MASK);
for (i = 0; i < pdev->num_resources; i++) {
irq = platform_get_irq(pdev, i);
if (irq < 0)
break;
if (chans_available & (1 << i)) {
rc = bcm2835_dma_chan_init(od, i, irq);
if (rc)
goto err_no_dma;
}
}
dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i);
/* Device-tree DMA controller registration */
rc = of_dma_controller_register(pdev->dev.of_node,
bcm2835_dma_xlate, od);
if (rc) {
dev_err(&pdev->dev, "Failed to register DMA controller\n");
goto err_no_dma;
}
rc = dma_async_device_register(&od->ddev);
if (rc) {
dev_err(&pdev->dev,
"Failed to register slave DMA engine device: %d\n", rc);
goto err_no_dma;
}
dev_dbg(&pdev->dev, "Load BCM2835 DMA engine driver\n");
return 0;
err_no_dma:
bcm2835_dma_free(od);
return rc;
}
static int bcm2835_dma_remove(struct platform_device *pdev)
{
struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
dma_async_device_unregister(&od->ddev);
bcm2835_dma_free(od);
return 0;
}
static struct platform_driver bcm2835_dma_driver = {
.probe = bcm2835_dma_probe,
.remove = bcm2835_dma_remove,
.driver = {
.name = "bcm2835-dma",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(bcm2835_dma_of_match),
},
};
module_platform_driver(bcm2835_dma_driver);
MODULE_ALIAS("platform:bcm2835-dma");
MODULE_DESCRIPTION("BCM2835 DMA engine driver");
MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment