Commit 96664483 authored by Greg Rose's avatar Greg Rose Committed by Jeff Kirsher

i40e: Implement configfs for NPAR BW configuration

Add configfs controls to get, set and commit NPAR BW configurations.

We export three controls:
	min_bw - Can take a value from 0 to 100 inclusive
	max_bw - Can take a value from 1 to 100 inclusive
	commit - A write-only control that accepts only a value of 1 and will
		cause the BW settings to be permanently committed to NVM so
		that they are persistent across power cycles and system
		resets

The BW values are relative and are expressed as percentages.  For more
information on the interpretation of the BW settings see the Dell
specifications for NPAR.

Also update the copyright year.

Change-ID: Id7496ca65630b5037e32ba6a5a748fbc1632881b
Signed-off-by: default avatarGreg Rose <gregory.v.rose@intel.com>
Tested-By: default avatarJim Young <james.m.young@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent f4492db1
################################################################################
#
# Intel Ethernet Controller XL710 Family Linux Driver
# Copyright(c) 2013 - 2014 Intel Corporation.
# Copyright(c) 2013 - 2015 Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
......@@ -37,6 +37,7 @@ i40e-objs := i40e_main.o \
i40e_hmc.o \
i40e_lan_hmc.o \
i40e_nvm.o \
i40e_configfs.o \
i40e_debugfs.o \
i40e_diag.o \
i40e_txrx.o \
......
......@@ -688,6 +688,7 @@ int i40e_vlan_rx_add_vid(struct net_device *netdev,
int i40e_vlan_rx_kill_vid(struct net_device *netdev,
__always_unused __be16 proto, u16 vid);
#endif
int i40e_open(struct net_device *netdev);
int i40e_vsi_open(struct i40e_vsi *vsi);
void i40e_vlan_stripping_disable(struct i40e_vsi *vsi);
int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid);
......@@ -698,7 +699,6 @@ bool i40e_is_vsi_in_vlan(struct i40e_vsi *vsi);
struct i40e_mac_filter *i40e_find_mac(struct i40e_vsi *vsi, u8 *macaddr,
bool is_vf, bool is_netdev);
#ifdef I40E_FCOE
int i40e_open(struct net_device *netdev);
int i40e_close(struct net_device *netdev);
int i40e_setup_tc(struct net_device *netdev, u8 tc);
void i40e_netpoll(struct net_device *netdev);
......@@ -735,7 +735,10 @@ int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr);
int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr);
void i40e_ptp_init(struct i40e_pf *pf);
void i40e_ptp_stop(struct i40e_pf *pf);
#if IS_ENABLED(CONFIG_CONFIGFS_FS)
int i40e_configfs_init(void);
void i40e_configfs_exit(void);
#endif /* CONFIG_CONFIGFS_FS */
i40e_status i40e_get_npar_bw_setting(struct i40e_pf *pf);
i40e_status i40e_set_npar_bw_setting(struct i40e_pf *pf);
i40e_status i40e_commit_npar_bw_setting(struct i40e_pf *pf);
......
/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Driver
* Copyright(c) 2013 - 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Contact Information:
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
******************************************************************************/
#include <linux/configfs.h>
#include "i40e.h"
#if IS_ENABLED(CONFIG_CONFIGFS_FS)
/**
* configfs structure for i40e
*
* This file adds code for configfs support for the i40e driver. This sets
* up a filesystem under /sys/kernel/config in which configuration changes
* can be made for the driver's netdevs.
*
* The initialization in this code creates the "i40e" entry in the configfs
* system. After that, the user needs to use mkdir to create configurations
* for specific netdev ports; for example "mkdir eth3". This code will verify
* that such a netdev exists and that it is owned by i40e.
*
**/
struct i40e_cfgfs_vsi {
struct config_item item;
struct i40e_vsi *vsi;
};
static inline struct i40e_cfgfs_vsi *to_i40e_cfgfs_vsi(struct config_item *item)
{
return item ? container_of(item, struct i40e_cfgfs_vsi, item) : NULL;
}
static struct configfs_attribute i40e_cfgfs_vsi_attr_min_bw = {
.ca_owner = THIS_MODULE,
.ca_name = "min_bw",
.ca_mode = S_IRUGO | S_IWUSR,
};
static struct configfs_attribute i40e_cfgfs_vsi_attr_max_bw = {
.ca_owner = THIS_MODULE,
.ca_name = "max_bw",
.ca_mode = S_IRUGO | S_IWUSR,
};
static struct configfs_attribute i40e_cfgfs_vsi_attr_commit = {
.ca_owner = THIS_MODULE,
.ca_name = "commit",
.ca_mode = S_IRUGO | S_IWUSR,
};
static struct configfs_attribute i40e_cfgfs_vsi_attr_port_count = {
.ca_owner = THIS_MODULE,
.ca_name = "ports",
.ca_mode = S_IRUGO | S_IWUSR,
};
static struct configfs_attribute i40e_cfgfs_vsi_attr_part_count = {
.ca_owner = THIS_MODULE,
.ca_name = "partitions",
.ca_mode = S_IRUGO | S_IWUSR,
};
static struct configfs_attribute *i40e_cfgfs_vsi_attrs[] = {
&i40e_cfgfs_vsi_attr_min_bw,
&i40e_cfgfs_vsi_attr_max_bw,
&i40e_cfgfs_vsi_attr_commit,
&i40e_cfgfs_vsi_attr_port_count,
&i40e_cfgfs_vsi_attr_part_count,
NULL,
};
/**
* i40e_cfgfs_vsi_attr_show - Show a VSI's NPAR BW partition info
* @item: A pointer back to the configfs item created on driver load
* @attr: A pointer to this item's configuration attribute
* @page: A pointer to the output buffer
**/
static ssize_t i40e_cfgfs_vsi_attr_show(struct config_item *item,
struct configfs_attribute *attr,
char *page)
{
struct i40e_cfgfs_vsi *i40e_cfgfs_vsi = to_i40e_cfgfs_vsi(item);
struct i40e_pf *pf = i40e_cfgfs_vsi->vsi->back;
ssize_t count;
if (i40e_cfgfs_vsi->vsi != pf->vsi[pf->lan_vsi])
return 0;
if (strncmp(attr->ca_name, "min_bw", 6) == 0)
count = sprintf(page, "%s %s %d%%\n",
i40e_cfgfs_vsi->vsi->netdev->name,
(pf->npar_min_bw & I40E_ALT_BW_RELATIVE_MASK) ?
"Relative Min BW" : "Absolute Min BW",
pf->npar_min_bw & I40E_ALT_BW_VALUE_MASK);
else if (strncmp(attr->ca_name, "max_bw", 6) == 0)
count = sprintf(page, "%s %s %d%%\n",
i40e_cfgfs_vsi->vsi->netdev->name,
(pf->npar_max_bw & I40E_ALT_BW_RELATIVE_MASK) ?
"Relative Max BW" : "Absolute Max BW",
pf->npar_max_bw & I40E_ALT_BW_VALUE_MASK);
else if (strncmp(attr->ca_name, "ports", 5) == 0)
count = sprintf(page, "%d\n",
pf->hw.num_ports);
else if (strncmp(attr->ca_name, "partitions", 10) == 0)
count = sprintf(page, "%d\n",
pf->hw.num_partitions);
else
return 0;
return count;
}
/**
* i40e_cfgfs_vsi_attr_store - Show a VSI's NPAR BW partition info
* @item: A pointer back to the configfs item created on driver load
* @attr: A pointer to this item's configuration attribute
* @page: A pointer to the user input buffer holding the user input values
**/
static ssize_t i40e_cfgfs_vsi_attr_store(struct config_item *item,
struct configfs_attribute *attr,
const char *page, size_t count)
{
struct i40e_cfgfs_vsi *i40e_cfgfs_vsi = to_i40e_cfgfs_vsi(item);
struct i40e_pf *pf = i40e_cfgfs_vsi->vsi->back;
char *p = (char *)page;
int rc;
unsigned long tmp;
if (i40e_cfgfs_vsi->vsi != pf->vsi[pf->lan_vsi])
return 0;
if (!p || (*p && (*p == '\n')))
return -EINVAL;
rc = kstrtoul(p, 10, &tmp);
if (rc)
return rc;
if (tmp > 100)
return -ERANGE;
if (strncmp(attr->ca_name, "min_bw", 6) == 0) {
if (tmp > (pf->npar_max_bw & I40E_ALT_BW_VALUE_MASK))
return -ERANGE;
/* Preserve the valid and relative BW bits - the rest is
* don't care.
*/
pf->npar_min_bw &= (I40E_ALT_BW_RELATIVE_MASK |
I40E_ALT_BW_VALID_MASK);
pf->npar_min_bw |= (tmp & I40E_ALT_BW_VALUE_MASK);
i40e_set_npar_bw_setting(pf);
} else if (strncmp(attr->ca_name, "max_bw", 6) == 0) {
if (tmp < 1 ||
tmp < (pf->npar_min_bw & I40E_ALT_BW_VALUE_MASK))
return -ERANGE;
/* Preserve the valid and relative BW bits - the rest is
* don't care.
*/
pf->npar_max_bw &= (I40E_ALT_BW_RELATIVE_MASK |
I40E_ALT_BW_VALID_MASK);
pf->npar_max_bw |= (tmp & I40E_ALT_BW_VALUE_MASK);
i40e_set_npar_bw_setting(pf);
} else if (strncmp(attr->ca_name, "commit", 6) == 0 && tmp == 1) {
if (i40e_commit_npar_bw_setting(pf))
return -EIO;
}
return count;
}
/**
* i40e_cfgfs_vsi_release - Free up the configuration item memory
* @item: A pointer back to the configfs item created on driver load
**/
static void i40e_cfgfs_vsi_release(struct config_item *item)
{
kfree(to_i40e_cfgfs_vsi(item));
}
static struct configfs_item_operations i40e_cfgfs_vsi_item_ops = {
.release = i40e_cfgfs_vsi_release,
.show_attribute = i40e_cfgfs_vsi_attr_show,
.store_attribute = i40e_cfgfs_vsi_attr_store,
};
static struct config_item_type i40e_cfgfs_vsi_type = {
.ct_item_ops = &i40e_cfgfs_vsi_item_ops,
.ct_attrs = i40e_cfgfs_vsi_attrs,
.ct_owner = THIS_MODULE,
};
struct i40e_cfgfs_group {
struct config_group group;
};
/**
* to_i40e_cfgfs_group - Get the group pointer from the config item
* @item: A pointer back to the configfs item created on driver load
**/
static inline struct i40e_cfgfs_group *
to_i40e_cfgfs_group(struct config_item *item)
{
return item ? container_of(to_config_group(item),
struct i40e_cfgfs_group, group) : NULL;
}
/**
* i40e_cfgfs_group_make_item - Create the configfs item with group container
* @group: A pointer to our configfs group
* @name: A pointer to the nume of the device we're looking for
**/
static struct config_item *
i40e_cfgfs_group_make_item(struct config_group *group, const char *name)
{
struct i40e_cfgfs_vsi *i40e_cfgfs_vsi;
struct net_device *netdev;
struct i40e_netdev_priv *np;
read_lock(&dev_base_lock);
netdev = first_net_device(&init_net);
while (netdev) {
if (strncmp(netdev->name, name, sizeof(netdev->name)) == 0)
break;
netdev = next_net_device(netdev);
}
read_unlock(&dev_base_lock);
if (!netdev)
return ERR_PTR(-ENODEV);
/* is this netdev owned by i40e? */
if (netdev->netdev_ops->ndo_open != i40e_open)
return ERR_PTR(-EACCES);
i40e_cfgfs_vsi = kzalloc(sizeof(*i40e_cfgfs_vsi), GFP_KERNEL);
if (!i40e_cfgfs_vsi)
return ERR_PTR(-ENOMEM);
np = netdev_priv(netdev);
i40e_cfgfs_vsi->vsi = np->vsi;
config_item_init_type_name(&i40e_cfgfs_vsi->item, name,
&i40e_cfgfs_vsi_type);
return &i40e_cfgfs_vsi->item;
}
static struct configfs_attribute i40e_cfgfs_group_attr_description = {
.ca_owner = THIS_MODULE,
.ca_name = "description",
.ca_mode = S_IRUGO,
};
static struct configfs_attribute *i40e_cfgfs_group_attrs[] = {
&i40e_cfgfs_group_attr_description,
NULL,
};
static ssize_t i40e_cfgfs_group_attr_show(struct config_item *item,
struct configfs_attribute *attr,
char *page)
{
return sprintf(page,
"i40e\n"
"\n"
"This subsystem allows the modification of network port configurations.\n"
"To start, use the name of the network port to be configured in a 'mkdir'\n"
"command, e.g. 'mkdir eth3'.\n");
}
static void i40e_cfgfs_group_release(struct config_item *item)
{
kfree(to_i40e_cfgfs_group(item));
}
static struct configfs_item_operations i40e_cfgfs_group_item_ops = {
.release = i40e_cfgfs_group_release,
.show_attribute = i40e_cfgfs_group_attr_show,
};
/* Note that, since no extra work is required on ->drop_item(),
* no ->drop_item() is provided.
*/
static struct configfs_group_operations i40e_cfgfs_group_ops = {
.make_item = i40e_cfgfs_group_make_item,
};
static struct config_item_type i40e_cfgfs_group_type = {
.ct_item_ops = &i40e_cfgfs_group_item_ops,
.ct_group_ops = &i40e_cfgfs_group_ops,
.ct_attrs = i40e_cfgfs_group_attrs,
.ct_owner = THIS_MODULE,
};
static struct configfs_subsystem i40e_cfgfs_group_subsys = {
.su_group = {
.cg_item = {
.ci_namebuf = "i40e",
.ci_type = &i40e_cfgfs_group_type,
},
},
};
/**
* i40e_configfs_init - Initialize configfs support for our driver
**/
int i40e_configfs_init(void)
{
int ret;
struct configfs_subsystem *subsys;
subsys = &i40e_cfgfs_group_subsys;
config_group_init(&subsys->su_group);
mutex_init(&subsys->su_mutex);
ret = configfs_register_subsystem(subsys);
if (ret) {
pr_err("Error %d while registering configfs subsystem %s\n",
ret, subsys->su_group.cg_item.ci_namebuf);
return ret;
}
return 0;
}
/**
* i40e_configfs_init - Bail out - unregister configfs subsystem and release
**/
void i40e_configfs_exit(void)
{
configfs_unregister_subsystem(&i40e_cfgfs_group_subsys);
}
#endif /* IS_ENABLED(CONFIG_CONFIGFS_FS) */
......@@ -4835,11 +4835,7 @@ static int i40e_setup_tc(struct net_device *netdev, u8 tc)
*
* Returns 0 on success, negative value on failure
**/
#ifdef I40E_FCOE
int i40e_open(struct net_device *netdev)
#else
static int i40e_open(struct net_device *netdev)
#endif
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
......@@ -7741,7 +7737,7 @@ static int i40e_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
return err;
}
static const struct net_device_ops i40e_netdev_ops = {
const struct net_device_ops i40e_netdev_ops = {
.ndo_open = i40e_open,
.ndo_stop = i40e_close,
.ndo_start_xmit = i40e_lan_xmit_frame,
......@@ -9943,6 +9939,10 @@ static int __init i40e_init_module(void)
pr_info("%s: %s - version %s\n", i40e_driver_name,
i40e_driver_string, i40e_driver_version_str);
pr_info("%s: %s\n", i40e_driver_name, i40e_copyright);
#if IS_ENABLED(CONFIG_CONFIGFS_FS)
i40e_configfs_init();
#endif /* CONFIG_CONFIGFS_FS */
i40e_dbg_init();
return pci_register_driver(&i40e_driver);
}
......@@ -9958,5 +9958,8 @@ static void __exit i40e_exit_module(void)
{
pci_unregister_driver(&i40e_driver);
i40e_dbg_exit();
#if IS_ENABLED(CONFIG_CONFIGFS_FS)
i40e_configfs_exit();
#endif /* CONFIG_CONFIGFS_FS */
}
module_exit(i40e_exit_module);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment