Commit 96db271a authored by Greg Ungerer's avatar Greg Ungerer Committed by Linus Torvalds

m68knommu: platform setup for 5307 ColdFire parts

Switch to platform style configuration for 5307 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent eb49e907
...@@ -13,11 +13,11 @@ ...@@ -13,11 +13,11 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <asm/dma.h> #include <linux/io.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfdma.h> #include <asm/mcfuart.h>
#include <asm/mcfwdebug.h> #include <asm/mcfwdebug.h>
/***************************************************************************/ /***************************************************************************/
...@@ -38,17 +38,51 @@ unsigned char ledbank = 0xff; ...@@ -38,17 +38,51 @@ unsigned char ledbank = 0xff;
/***************************************************************************/ /***************************************************************************/
/* static struct mcf_platform_uart m5307_uart_platform[] = {
* DMA channel base address table. {
*/ .mapbase = MCF_MBAR + MCFUART_BASE1,
unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = { .irq = 73,
MCF_MBAR + MCFDMA_BASE0, },
MCF_MBAR + MCFDMA_BASE1, {
MCF_MBAR + MCFDMA_BASE2, .mapbase = MCF_MBAR + MCFUART_BASE2,
MCF_MBAR + MCFDMA_BASE3, .irq = 74,
},
{ },
};
static struct platform_device m5307_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5307_uart_platform,
}; };
unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; static struct platform_device *m5307_devices[] __initdata = {
&m5307_uart,
};
/***************************************************************************/
static void __init m5307_uart_init_line(int line, int irq)
{
if (line == 0) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
} else if (line == 1) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
}
}
static void __init m5307_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5307_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5307_uart_init_line(line, m5307_uart_platform[line].irq);
}
/***************************************************************************/ /***************************************************************************/
...@@ -99,7 +133,7 @@ int mcf_timerirqpending(int timer) ...@@ -99,7 +133,7 @@ int mcf_timerirqpending(int timer)
/***************************************************************************/ /***************************************************************************/
void config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mcf_setimr(MCFSIM_IMR_MASKALL); mcf_setimr(MCFSIM_IMR_MASKALL);
...@@ -117,7 +151,7 @@ void config_BSP(char *commandp, int size) ...@@ -117,7 +151,7 @@ void config_BSP(char *commandp, int size)
mach_reset = coldfire_reset; mach_reset = coldfire_reset;
#ifdef MCF_BDM_DISABLE #ifdef CONFIG_BDM_DISABLE
/* /*
* Disable the BDM clocking. This also turns off most of the rest of * Disable the BDM clocking. This also turns off most of the rest of
* the BDM device. This is good for EMC reasons. This option is not * the BDM device. This is good for EMC reasons. This option is not
...@@ -128,3 +162,14 @@ void config_BSP(char *commandp, int size) ...@@ -128,3 +162,14 @@ void config_BSP(char *commandp, int size)
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
m5307_uarts_init();
platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment