drm/i915: Do a dummy DPCD read before the actual read

commit f6a19066 upstream.

Sometimes we seem to get utter garbage from DPCD reads. The resulting
buffer is filled with the same byte, and the operation completed without
errors. My HP ZR24w monitor seems particularly susceptible to this
problem once it's gone into a sleep mode.

The issue seems to happen only for the first AUX message that wakes the
sink up. But as the first AUX read we often do is the DPCD receiver
cap it does wreak a bit of havoc with subsequent link training etc. when
the receiver cap bw/lane/etc. information is garbage.

A sufficient workaround seems to be to perform a single byte dummy read
before reading the actual data. I suppose that just wakes up the sink
sufficiently and we can just throw away the returned data in case it's
crap. DP_DPCD_REV seems like a sufficiently safe location to read here.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>

drivers/gpu/drm/i915/intel_dp.c

@@ -2166,6 +2166,13 @@ intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset,
 	ssize_t ret;
 	int i;
 
+	/*
+	 * Sometime we just get the same incorrect byte repeated
+	 * over the entire buffer. Doing just one throw away read
+	 * initially seems to "solve" it.
+	 */
+	drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1);
+
 	for (i = 0; i < 3; i++) {
 		ret = drm_dp_dpcd_read(aux, offset, buffer, size);
 		if (ret == size)