Commit 98272bb7 authored by Filipe Manana's avatar Filipe Manana Committed by David Sterba

btrfs: send, orphanize first all conflicting inodes when processing references

When doing an incremental send it is possible that when processing the new
references for an inode we end up issuing rename or link operations that
have an invalid path, which contains the orphanized name of a directory
before we actually orphanized it, causing the receiver to fail.

The following reproducer triggers such scenario:

  $ cat reproducer.sh
  #!/bin/bash

  mkfs.btrfs -f /dev/sdi >/dev/null
  mount /dev/sdi /mnt/sdi

  touch /mnt/sdi/a
  touch /mnt/sdi/b
  mkdir /mnt/sdi/testdir
  # We want "a" to have a lower inode number then "testdir" (257 vs 259).
  mv /mnt/sdi/a /mnt/sdi/testdir/a

  # Filesystem looks like:
  #
  # .                           (ino 256)
  # |----- testdir/             (ino 259)
  # |          |----- a         (ino 257)
  # |
  # |----- b                    (ino 258)

  btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap1
  btrfs send -f /tmp/snap1.send /mnt/sdi/snap1

  # Now rename 259 to "testdir_2", then change the name of 257 to
  # "testdir" and make it a direct descendant of the root inode (256).
  # Also create a new link for inode 257 with the old name of inode 258.
  # By swapping the names and location of several inodes and create a
  # nasty dependency chain of rename and link operations.
  mv /mnt/sdi/testdir/a /mnt/sdi/a2
  touch /mnt/sdi/testdir/a
  mv /mnt/sdi/b /mnt/sdi/b2
  ln /mnt/sdi/a2 /mnt/sdi/b
  mv /mnt/sdi/testdir /mnt/sdi/testdir_2
  mv /mnt/sdi/a2 /mnt/sdi/testdir

  # Filesystem now looks like:
  #
  # .                            (ino 256)
  # |----- testdir_2/            (ino 259)
  # |          |----- a          (ino 260)
  # |
  # |----- testdir               (ino 257)
  # |----- b                     (ino 257)
  # |----- b2                    (ino 258)

  btrfs subvolume snapshot -r /mnt/sdi /mnt/sdi/snap2
  btrfs send -f /tmp/snap2.send -p /mnt/sdi/snap1 /mnt/sdi/snap2

  mkfs.btrfs -f /dev/sdj >/dev/null
  mount /dev/sdj /mnt/sdj

  btrfs receive -f /tmp/snap1.send /mnt/sdj
  btrfs receive -f /tmp/snap2.send /mnt/sdj

  umount /mnt/sdi
  umount /mnt/sdj

When running the reproducer, the receive of the incremental send stream
fails:

  $ ./reproducer.sh
  Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
  At subvol /mnt/sdi/snap1
  Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
  At subvol /mnt/sdi/snap2
  At subvol snap1
  At snapshot snap2
  ERROR: link b -> o259-6-0/a failed: No such file or directory

The problem happens because of the following:

1) Before we start iterating the list of new references for inode 257,
   we generate its current path and store it at @valid_path, done at
   the very beginning of process_recorded_refs(). The generated path
   is "o259-6-0/a", containing the orphanized name for inode 259;

2) Then we iterate over the list of new references, which has the
   references "b" and "testdir" in that specific order;

3) We process reference "b" first, because it is in the list before
   reference "testdir". We then issue a link operation to create
   the new reference "b" using a target path corresponding to the
   content at @valid_path, which corresponds to "o259-6-0/a".
   However we haven't yet orphanized inode 259, its name is still
   "testdir", and not "o259-6-0". The orphanization of 259 did not
   happen yet because we will process the reference named "testdir"
   for inode 257 only in the next iteration of the loop that goes
   over the list of new references.

Fix the issue by having a preliminar iteration over all the new references
at process_recorded_refs(). This iteration is responsible only for doing
the orphanization of other inodes that have and old reference that
conflicts with one of the new references of the inode we are currently
processing. The emission of rename and link operations happen now in the
next iteration of the new references.

A test case for fstests will follow soon.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
parent 1465af12
......@@ -3873,52 +3873,56 @@ static int process_recorded_refs(struct send_ctx *sctx, int *pending_move)
goto out;
}
list_for_each_entry(cur, &sctx->new_refs, list) {
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
* than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
* Before doing any rename and link operations, do a first pass on the
* new references to orphanize any unprocessed inodes that may have a
* reference that conflicts with one of the new references of the current
* inode. This needs to happen first because a new reference may conflict
* with the old reference of a parent directory, so we must make sure
* that the path used for link and rename commands don't use an
* orphanized name when an ancestor was not yet orphanized.
*
* Example:
*
* Parent snapshot:
*
* . (ino 256)
* |----- testdir/ (ino 259)
* | |----- a (ino 257)
* |
* |----- b (ino 258)
*
* Send snapshot:
*
* . (ino 256)
* |----- testdir_2/ (ino 259)
* | |----- a (ino 260)
* |
* |----- testdir (ino 257)
* |----- b (ino 257)
* |----- b2 (ino 258)
*
* Processing the new reference for inode 257 with name "b" may happen
* before processing the new reference with name "testdir". If so, we
* must make sure that by the time we send a link command to create the
* hard link "b", inode 259 was already orphanized, since the generated
* path in "valid_path" already contains the orphanized name for 259.
* We are processing inode 257, so only later when processing 259 we do
* the rename operation to change its temporary (orphanized) name to
* "testdir_2".
*/
list_for_each_entry(cur, &sctx->new_refs, list) {
ret = get_cur_inode_state(sctx, cur->dir, cur->dir_gen);
if (ret < 0)
goto out;
if (ret == inode_state_will_create) {
ret = 0;
/*
* First check if any of the current inodes refs did
* already create the dir.
*/
list_for_each_entry(cur2, &sctx->new_refs, list) {
if (cur == cur2)
break;
if (cur2->dir == cur->dir) {
ret = 1;
break;
}
}
/*
* If that did not happen, check if a previous inode
* did already create the dir.
*/
if (!ret)
ret = did_create_dir(sctx, cur->dir);
if (ret < 0)
goto out;
if (!ret) {
ret = send_create_inode(sctx, cur->dir);
if (ret < 0)
goto out;
}
}
if (ret == inode_state_will_create)
continue;
/*
* Check if this new ref would overwrite the first ref of
* another unprocessed inode. If yes, orphanize the
* overwritten inode. If we find an overwritten ref that is
* not the first ref, simply unlink it.
* Check if this new ref would overwrite the first ref of another
* unprocessed inode. If yes, orphanize the overwritten inode.
* If we find an overwritten ref that is not the first ref,
* simply unlink it.
*/
ret = will_overwrite_ref(sctx, cur->dir, cur->dir_gen,
cur->name, cur->name_len,
......@@ -3997,6 +4001,49 @@ static int process_recorded_refs(struct send_ctx *sctx, int *pending_move)
}
}
}
list_for_each_entry(cur, &sctx->new_refs, list) {
/*
* We may have refs where the parent directory does not exist
* yet. This happens if the parent directories inum is higher
* than the current inum. To handle this case, we create the
* parent directory out of order. But we need to check if this
* did already happen before due to other refs in the same dir.
*/
ret = get_cur_inode_state(sctx, cur->dir, cur->dir_gen);
if (ret < 0)
goto out;
if (ret == inode_state_will_create) {
ret = 0;
/*
* First check if any of the current inodes refs did
* already create the dir.
*/
list_for_each_entry(cur2, &sctx->new_refs, list) {
if (cur == cur2)
break;
if (cur2->dir == cur->dir) {
ret = 1;
break;
}
}
/*
* If that did not happen, check if a previous inode
* did already create the dir.
*/
if (!ret)
ret = did_create_dir(sctx, cur->dir);
if (ret < 0)
goto out;
if (!ret) {
ret = send_create_inode(sctx, cur->dir);
if (ret < 0)
goto out;
}
}
if (S_ISDIR(sctx->cur_inode_mode) && sctx->parent_root) {
ret = wait_for_dest_dir_move(sctx, cur, is_orphan);
if (ret < 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment