Commit 986857ac authored by Anson Huang's avatar Anson Huang Committed by Wim Van Sebroeck

watchdog: imx_sc: Add i.MX system controller watchdog support

i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
inside, the system controller is in charge of controlling power,
clock and watchdog etc..

This patch adds i.MX system controller watchdog driver support,
watchdog operation needs to be done in secure EL3 mode via
ARM-Trusted-Firmware, using SMC call, CPU will trap into
ARM-Trusted-Firmware and then it will request system controller
to do watchdog operation via IPC.
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarWim Van Sebroeck <wim@linux-watchdog.org>
parent bb83520d
...@@ -653,6 +653,22 @@ config IMX2_WDT ...@@ -653,6 +653,22 @@ config IMX2_WDT
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called imx2_wdt. module will be called imx2_wdt.
config IMX_SC_WDT
tristate "IMX SC Watchdog"
depends on HAVE_ARM_SMCCC
select WATCHDOG_CORE
help
This is the driver for the system controller watchdog
on the NXP i.MX SoCs with system controller inside, the
watchdog driver will call ARM SMC API and trap into
ARM-Trusted-Firmware for operations, ARM-Trusted-Firmware
will request system controller to execute the operations.
If you have one of these processors and wish to have
watchdog support enabled, say Y, otherwise say N.
To compile this driver as a module, choose M here: the
module will be called imx_sc_wdt.
config UX500_WATCHDOG config UX500_WATCHDOG
tristate "ST-Ericsson Ux500 watchdog" tristate "ST-Ericsson Ux500 watchdog"
depends on MFD_DB8500_PRCMU depends on MFD_DB8500_PRCMU
......
...@@ -68,6 +68,7 @@ obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o ...@@ -68,6 +68,7 @@ obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
obj-$(CONFIG_IMX_SC_WDT) += imx_sc_wdt.o
obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2018-2019 NXP.
*/
#include <linux/arm-smccc.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/watchdog.h>
#define DEFAULT_TIMEOUT 60
/*
* Software timer tick implemented in scfw side, support 10ms to 0xffffffff ms
* in theory, but for normal case, 1s~128s is enough, you can change this max
* value in case it's not enough.
*/
#define MAX_TIMEOUT 128
#define IMX_SIP_TIMER 0xC2000002
#define IMX_SIP_TIMER_START_WDOG 0x01
#define IMX_SIP_TIMER_STOP_WDOG 0x02
#define IMX_SIP_TIMER_SET_WDOG_ACT 0x03
#define IMX_SIP_TIMER_PING_WDOG 0x04
#define IMX_SIP_TIMER_SET_TIMEOUT_WDOG 0x05
#define IMX_SIP_TIMER_GET_WDOG_STAT 0x06
#define IMX_SIP_TIMER_SET_PRETIME_WDOG 0x07
#define SC_TIMER_WDOG_ACTION_PARTITION 0
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0000);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static int imx_sc_wdt_ping(struct watchdog_device *wdog)
{
struct arm_smccc_res res;
arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_PING_WDOG,
0, 0, 0, 0, 0, 0, &res);
return 0;
}
static int imx_sc_wdt_start(struct watchdog_device *wdog)
{
struct arm_smccc_res res;
arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_START_WDOG,
0, 0, 0, 0, 0, 0, &res);
if (res.a0)
return -EACCES;
arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_SET_WDOG_ACT,
SC_TIMER_WDOG_ACTION_PARTITION,
0, 0, 0, 0, 0, &res);
return res.a0 ? -EACCES : 0;
}
static int imx_sc_wdt_stop(struct watchdog_device *wdog)
{
struct arm_smccc_res res;
arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_STOP_WDOG,
0, 0, 0, 0, 0, 0, &res);
return res.a0 ? -EACCES : 0;
}
static int imx_sc_wdt_set_timeout(struct watchdog_device *wdog,
unsigned int timeout)
{
struct arm_smccc_res res;
wdog->timeout = timeout;
arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_SET_TIMEOUT_WDOG,
timeout * 1000, 0, 0, 0, 0, 0, &res);
return res.a0 ? -EACCES : 0;
}
static const struct watchdog_ops imx_sc_wdt_ops = {
.owner = THIS_MODULE,
.start = imx_sc_wdt_start,
.stop = imx_sc_wdt_stop,
.ping = imx_sc_wdt_ping,
.set_timeout = imx_sc_wdt_set_timeout,
};
static const struct watchdog_info imx_sc_wdt_info = {
.identity = "i.MX SC watchdog timer",
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
};
static int imx_sc_wdt_probe(struct platform_device *pdev)
{
struct watchdog_device *imx_sc_wdd;
int ret;
imx_sc_wdd = devm_kzalloc(&pdev->dev, sizeof(*imx_sc_wdd), GFP_KERNEL);
if (!imx_sc_wdd)
return -ENOMEM;
platform_set_drvdata(pdev, imx_sc_wdd);
imx_sc_wdd->info = &imx_sc_wdt_info;
imx_sc_wdd->ops = &imx_sc_wdt_ops;
imx_sc_wdd->min_timeout = 1;
imx_sc_wdd->max_timeout = MAX_TIMEOUT;
imx_sc_wdd->parent = &pdev->dev;
imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
ret = watchdog_init_timeout(imx_sc_wdd, 0, &pdev->dev);
if (ret)
dev_warn(&pdev->dev, "Failed to set timeout value, using default\n");
watchdog_stop_on_reboot(imx_sc_wdd);
watchdog_stop_on_unregister(imx_sc_wdd);
ret = devm_watchdog_register_device(&pdev->dev, imx_sc_wdd);
if (ret) {
dev_err(&pdev->dev, "Failed to register watchdog device\n");
return ret;
}
return 0;
}
static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
{
struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
if (watchdog_active(imx_sc_wdd))
imx_sc_wdt_stop(imx_sc_wdd);
return 0;
}
static int __maybe_unused imx_sc_wdt_resume(struct device *dev)
{
struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
if (watchdog_active(imx_sc_wdd))
imx_sc_wdt_start(imx_sc_wdd);
return 0;
}
static SIMPLE_DEV_PM_OPS(imx_sc_wdt_pm_ops,
imx_sc_wdt_suspend, imx_sc_wdt_resume);
static const struct of_device_id imx_sc_wdt_dt_ids[] = {
{ .compatible = "fsl,imx-sc-wdt", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_sc_wdt_dt_ids);
static struct platform_driver imx_sc_wdt_driver = {
.probe = imx_sc_wdt_probe,
.driver = {
.name = "imx-sc-wdt",
.of_match_table = imx_sc_wdt_dt_ids,
.pm = &imx_sc_wdt_pm_ops,
},
};
module_platform_driver(imx_sc_wdt_driver);
MODULE_AUTHOR("Robin Gong <yibin.gong@nxp.com>");
MODULE_DESCRIPTION("NXP i.MX system controller watchdog driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment