mfd: rk808: Add RK805 support

The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld
devices. It contains the following components:

    - Regulators
    - RTC
    - Clocking

Both RK808 and RK805 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/Kconfig

@@ -951,13 +951,13 @@ config MFD_RC5T583
 	  different functionality of the device.
 
 config MFD_RK808
-	tristate "Rockchip RK808/RK818 Power Management Chip"
+	tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
 	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	  If you say yes here you get support for the RK808 and RK818
+	  If you say yes here you get support for the RK805, RK808 and RK818
 	  Power Management chips.
 	  This driver provides common support for accessing the device
 	  through I2C interface. The device supports multiple sub-devices

drivers/mfd/rk808.c

@@ -70,6 +70,14 @@ static const struct regmap_config rk818_regmap_config = {
 	.volatile_reg = rk808_is_volatile_reg,
 };
 
+static const struct regmap_config rk805_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK805_OFF_SOURCE_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
 static const struct regmap_config rk808_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -86,6 +94,16 @@ static struct resource rtc_resources[] = {
 	}
 };
 
+static const struct mfd_cell rk805s[] = {
+	{ .name = "rk808-clkout", },
+	{ .name = "rk808-regulator", },
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rtc_resources),
+		.resources = &rtc_resources[0],
+	},
+};
+
 static const struct mfd_cell rk808s[] = {
 	{ .name = "rk808-clkout", },
 	{ .name = "rk808-regulator", },
@@ -106,6 +124,20 @@ static const struct mfd_cell rk818s[] = {
 	},
 };
 
+static const struct rk808_reg_data rk805_pre_init_reg[] = {
+	{RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK3_ILMAX_3000MA},
+	{RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK4_ILMAX_3500MA},
+	{RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
+	{RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
+	{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
+};
+
 static const struct rk808_reg_data rk808_pre_init_reg[] = {
 	{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_150MA },
 	{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_200MA },
@@ -135,6 +167,41 @@ static const struct rk808_reg_data rk818_pre_init_reg[] = {
 						    VB_LO_SEL_3500MV },
 };
 
+static const struct regmap_irq rk805_irqs[] = {
+	[RK805_IRQ_PWRON_RISE] = {
+		.mask = RK805_IRQ_PWRON_RISE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_VB_LOW] = {
+		.mask = RK805_IRQ_VB_LOW_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON] = {
+		.mask = RK805_IRQ_PWRON_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_LP] = {
+		.mask = RK805_IRQ_PWRON_LP_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_HOTDIE] = {
+		.mask = RK805_IRQ_HOTDIE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_ALARM] = {
+		.mask = RK805_IRQ_RTC_ALARM_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_PERIOD] = {
+		.mask = RK805_IRQ_RTC_PERIOD_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_FALL] = {
+		.mask = RK805_IRQ_PWRON_FALL_MSK,
+		.reg_offset = 0,
+	},
+};
+
 static const struct regmap_irq rk808_irqs[] = {
 	/* INT_STS */
 	[RK808_IRQ_VOUT_LO] = {
@@ -247,6 +314,17 @@ static const struct regmap_irq rk818_irqs[] = {
 	},
 };
 
+static struct regmap_irq_chip rk805_irq_chip = {
+	.name = "rk805",
+	.irqs = rk805_irqs,
+	.num_irqs = ARRAY_SIZE(rk805_irqs),
+	.num_regs = 1,
+	.status_base = RK805_INT_STS_REG,
+	.mask_base = RK805_INT_STS_MSK_REG,
+	.ack_base = RK805_INT_STS_REG,
+	.init_ack_masked = true,
+};
+
 static const struct regmap_irq_chip rk808_irq_chip = {
 	.name = "rk808",
 	.irqs = rk808_irqs,
@@ -272,6 +350,25 @@ static const struct regmap_irq_chip rk818_irq_chip = {
 };
 
 static struct i2c_client *rk808_i2c_client;
+
+static void rk805_device_shutdown(void)
+{
+	int ret;
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+	if (!rk808) {
+		dev_warn(&rk808_i2c_client->dev,
+			 "have no rk805, so do nothing here\n");
+		return;
+	}
+
+	ret = regmap_update_bits(rk808->regmap,
+				 RK805_DEV_CTRL_REG,
+				 DEV_OFF, DEV_OFF);
+	if (ret)
+		dev_err(&rk808_i2c_client->dev, "power off error!\n");
+}
+
 static void rk808_device_shutdown(void)
 {
 	int ret;
@@ -309,6 +406,7 @@ static void rk818_device_shutdown(void)
 }
 
 static const struct of_device_id rk808_of_match[] = {
+	{ .compatible = "rockchip,rk805" },
 	{ .compatible = "rockchip,rk808" },
 	{ .compatible = "rockchip,rk818" },
 	{ },
@@ -352,6 +450,15 @@ static int rk808_probe(struct i2c_client *client,
 	dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
 
 	switch (rk808->variant) {
+	case RK805_ID:
+		rk808->regmap_cfg = &rk805_regmap_config;
+		rk808->regmap_irq_chip = &rk805_irq_chip;
+		pre_init_reg = rk805_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
+		cells = rk805s;
+		nr_cells = ARRAY_SIZE(rk805s);
+		pm_pwroff_fn = rk805_device_shutdown;
+		break;
 	case RK808_ID:
 		rk808->regmap_cfg = &rk808_regmap_config;
 		rk808->regmap_irq_chip = &rk808_irq_chip;
@@ -444,6 +551,7 @@ static int rk808_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id rk808_ids[] = {
+	{ "rk805" },
 	{ "rk808" },
 	{ "rk818" },
 	{ },