Commit 9b00f1b7 authored by Daniel Borkmann's avatar Daniel Borkmann

bpf: Fix truncation handling for mod32 dst reg wrt zero

Recently noticed that when mod32 with a known src reg of 0 is performed,
then the dst register is 32-bit truncated in verifier:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = 0
  1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b7) r1 = -1
  2: R0_w=inv0 R1_w=inv-1 R10=fp0
  2: (b4) w2 = -1
  3: R0_w=inv0 R1_w=inv-1 R2_w=inv4294967295 R10=fp0
  3: (9c) w1 %= w0
  4: R0_w=inv0 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  4: (b7) r0 = 1
  5: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  5: (1d) if r1 == r2 goto pc+1
   R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: (b7) r0 = 2
  7: R0_w=inv2 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  7: (95) exit
  7: R0=inv1 R1=inv(id=0,umin_value=4294967295,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2=inv4294967295 R10=fp0
  7: (95) exit

However, as a runtime result, we get 2 instead of 1, meaning the dst
register does not contain (u32)-1 in this case. The reason is fairly
straight forward given the 0 test leaves the dst register as-is:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+1
   4: (9c) w1 %= w0
   5: (b7) r0 = 1
   6: (1d) if r1 == r2 goto pc+1
   7: (b7) r0 = 2
   8: (95) exit

This was originally not an issue given the dst register was marked as
completely unknown (aka 64 bit unknown). However, after 468f6eaf
("bpf: fix 32-bit ALU op verification") the verifier casts the register
output to 32 bit, and hence it becomes 32 bit unknown. Note that for
the case where the src register is unknown, the dst register is marked
64 bit unknown. After the fix, the register is truncated by the runtime
and the test passes:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+2
   4: (9c) w1 %= w0
   5: (05) goto pc+1
   6: (bc) w1 = w1
   7: (b7) r0 = 1
   8: (1d) if r1 == r2 goto pc+1
   9: (b7) r0 = 2
  10: (95) exit

Semantics also match with {R,W}x mod{64,32} 0 -> {R,W}x. Invalid div
has always been {R,W}x div{64,32} 0 -> 0. Rewrites are as follows:

  mod32:                            mod64:

  (16) if w0 == 0x0 goto pc+2       (15) if r0 == 0x0 goto pc+1
  (9c) w1 %= w0                     (9f) r1 %= r0
  (05) goto pc+1
  (bc) w1 = w1

Fixes: 468f6eaf ("bpf: fix 32-bit ALU op verification")
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
parent 732fa323
......@@ -11006,7 +11006,7 @@ static int fixup_bpf_calls(struct bpf_verifier_env *env)
bool isdiv = BPF_OP(insn->code) == BPF_DIV;
struct bpf_insn *patchlet;
struct bpf_insn chk_and_div[] = {
/* Rx div 0 -> 0 */
/* [R,W]x div 0 -> 0 */
BPF_RAW_INSN((is64 ? BPF_JMP : BPF_JMP32) |
BPF_JNE | BPF_K, insn->src_reg,
0, 2, 0),
......@@ -11015,16 +11015,18 @@ static int fixup_bpf_calls(struct bpf_verifier_env *env)
*insn,
};
struct bpf_insn chk_and_mod[] = {
/* Rx mod 0 -> Rx */
/* [R,W]x mod 0 -> [R,W]x */
BPF_RAW_INSN((is64 ? BPF_JMP : BPF_JMP32) |
BPF_JEQ | BPF_K, insn->src_reg,
0, 1, 0),
0, 1 + (is64 ? 0 : 1), 0),
*insn,
BPF_JMP_IMM(BPF_JA, 0, 0, 1),
BPF_MOV32_REG(insn->dst_reg, insn->dst_reg),
};
patchlet = isdiv ? chk_and_div : chk_and_mod;
cnt = isdiv ? ARRAY_SIZE(chk_and_div) :
ARRAY_SIZE(chk_and_mod);
ARRAY_SIZE(chk_and_mod) - (is64 ? 2 : 0);
new_prog = bpf_patch_insn_data(env, i + delta, patchlet, cnt);
if (!new_prog)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment