Commit 9b0a25f0 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown

ASoC: neo1973_wm8753: Move lm4857 specefic code to its own module

This patch moves the code for the lm4857 AMP from the neo1973_wm8753 sound
board driver to its own module.
The lm4857 is a generic AMP IC and not specific to the neo1973.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Acked-by: default avatarLiam Girdwood <lrg@ti.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 004c52e0
......@@ -347,6 +347,9 @@ config SND_SOC_WM9713
tristate
# Amp
config SND_SOC_LM4857
tristate
config SND_SOC_MAX9877
tristate
......
......@@ -77,6 +77,7 @@ snd-soc-wm-hubs-objs := wm_hubs.o
snd-soc-jz4740-codec-objs := jz4740.o
# Amp
snd-soc-lm4857-objs := lm4857.o
snd-soc-max9877-objs := max9877.o
snd-soc-tpa6130a2-objs := tpa6130a2.o
snd-soc-wm2000-objs := wm2000.o
......@@ -161,6 +162,7 @@ obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o
# Amp
obj-$(CONFIG_SND_SOC_LM4857) += snd-soc-lm4857.o
obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o
obj-$(CONFIG_SND_SOC_TPA6130A2) += snd-soc-tpa6130a2.o
obj-$(CONFIG_SND_SOC_WM2000) += snd-soc-wm2000.o
......
/*
* LM4857 AMP driver
*
* Copyright 2007 Wolfson Microelectronics PLC.
* Author: Graeme Gregory
* graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
* Copyright 2011 Lars-Peter Clausen <lars@metafoo.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/soc.h>
#include <sound/tlv.h>
struct lm4857 {
struct i2c_client *i2c;
uint8_t mode;
};
static const uint8_t lm4857_default_regs[] = {
0x00, 0x00, 0x00, 0x00,
};
/* The register offsets in the cache array */
#define LM4857_MVOL 0
#define LM4857_LVOL 1
#define LM4857_RVOL 2
#define LM4857_CTRL 3
/* the shifts required to set these bits */
#define LM4857_3D 5
#define LM4857_WAKEUP 5
#define LM4857_EPGAIN 4
static int lm4857_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
uint8_t data;
int ret;
ret = snd_soc_cache_write(codec, reg, value);
if (ret < 0)
return ret;
data = (reg << 6) | value;
ret = i2c_master_send(codec->control_data, &data, 1);
if (ret != 1) {
dev_err(codec->dev, "Failed to write register: %d\n", ret);
return ret;
}
return 0;
}
static unsigned int lm4857_read(struct snd_soc_codec *codec,
unsigned int reg)
{
unsigned int val;
int ret;
ret = snd_soc_cache_read(codec, reg, &val);
if (ret)
return -1;
return val;
}
static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec);
ucontrol->value.integer.value[0] = lm4857->mode;
return 0;
}
static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec);
uint8_t value = ucontrol->value.integer.value[0];
lm4857->mode = value;
if (codec->dapm.bias_level == SND_SOC_BIAS_ON)
snd_soc_update_bits(codec, LM4857_CTRL, 0x0F, value + 6);
return 1;
}
static int lm4857_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec);
switch (level) {
case SND_SOC_BIAS_ON:
snd_soc_update_bits(codec, LM4857_CTRL, 0x0F, lm4857->mode + 6);
break;
case SND_SOC_BIAS_STANDBY:
snd_soc_update_bits(codec, LM4857_CTRL, 0x0F, 0);
break;
default:
break;
}
codec->dapm.bias_level = level;
return 0;
}
static const char *lm4857_mode[] = {
"Earpiece",
"Loudspeaker",
"Loudspeaker + Headphone",
"Headphone",
};
static const struct soc_enum lm4857_mode_enum =
SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode);
static const struct snd_soc_dapm_widget lm4857_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("IN"),
SND_SOC_DAPM_OUTPUT("LS"),
SND_SOC_DAPM_OUTPUT("HP"),
SND_SOC_DAPM_OUTPUT("EP"),
};
static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
static const struct snd_kcontrol_new lm4857_controls[] = {
SOC_SINGLE_TLV("Left Playback Volume", LM4857_LVOL, 0, 31, 0,
stereo_tlv),
SOC_SINGLE_TLV("Right Playback Volume", LM4857_RVOL, 0, 31, 0,
stereo_tlv),
SOC_SINGLE_TLV("Mono Playback Volume", LM4857_MVOL, 0, 31, 0,
mono_tlv),
SOC_SINGLE("Spk 3D Playback Switch", LM4857_LVOL, LM4857_3D, 1, 0),
SOC_SINGLE("HP 3D Playback Switch", LM4857_RVOL, LM4857_3D, 1, 0),
SOC_SINGLE("Fast Wakeup Playback Switch", LM4857_CTRL,
LM4857_WAKEUP, 1, 0),
SOC_SINGLE("Earpiece 6dB Playback Switch", LM4857_CTRL,
LM4857_EPGAIN, 1, 0),
SOC_ENUM_EXT("Mode", lm4857_mode_enum,
lm4857_get_mode, lm4857_set_mode),
};
/* There is a demux inbetween the the input signal and the output signals.
* Currently there is no easy way to model it in ASoC and since it does not make
* much of a difference in practice simply connect the input direclty to the
* outputs. */
static const struct snd_soc_dapm_route lm4857_routes[] = {
{"LS", NULL, "IN"},
{"HP", NULL, "IN"},
{"EP", NULL, "IN"},
};
static int lm4857_probe(struct snd_soc_codec *codec)
{
struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_dapm_context *dapm = &codec->dapm;
int ret;
codec->control_data = lm4857->i2c;
ret = snd_soc_add_controls(codec, lm4857_controls,
ARRAY_SIZE(lm4857_controls));
if (ret)
return ret;
ret = snd_soc_dapm_new_controls(dapm, lm4857_dapm_widgets,
ARRAY_SIZE(lm4857_dapm_widgets));
if (ret)
return ret;
ret = snd_soc_dapm_add_routes(dapm, lm4857_routes,
ARRAY_SIZE(lm4857_routes));
if (ret)
return ret;
snd_soc_dapm_new_widgets(dapm);
return 0;
}
static struct snd_soc_codec_driver soc_codec_dev_lm4857 = {
.write = lm4857_write,
.read = lm4857_read,
.probe = lm4857_probe,
.reg_cache_size = ARRAY_SIZE(lm4857_default_regs),
.reg_word_size = sizeof(uint8_t),
.reg_cache_default = lm4857_default_regs,
.set_bias_level = lm4857_set_bias_level,
};
static int __devinit lm4857_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct lm4857 *lm4857;
int ret;
lm4857 = kzalloc(sizeof(*lm4857), GFP_KERNEL);
if (!lm4857)
return -ENOMEM;
i2c_set_clientdata(i2c, lm4857);
lm4857->i2c = i2c;
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_lm4857, NULL, 0);
if (ret) {
kfree(lm4857);
return ret;
}
return 0;
}
static int __devexit lm4857_i2c_remove(struct i2c_client *i2c)
{
struct lm4857 *lm4857 = i2c_get_clientdata(i2c);
snd_soc_unregister_codec(&i2c->dev);
kfree(lm4857);
return 0;
}
static const struct i2c_device_id lm4857_i2c_id[] = {
{ "lm4857", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm4857_i2c_id);
static struct i2c_driver lm4857_i2c_driver = {
.driver = {
.name = "lm4857",
.owner = THIS_MODULE,
},
.probe = lm4857_i2c_probe,
.remove = __devexit_p(lm4857_i2c_remove),
.id_table = lm4857_i2c_id,
};
static int __init lm4857_init(void)
{
return i2c_add_driver(&lm4857_i2c_driver);
}
module_init(lm4857_init);
static void __exit lm4857_exit(void)
{
i2c_del_driver(&lm4857_i2c_driver);
}
module_exit(lm4857_exit);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("LM4857 amplifier driver");
MODULE_LICENSE("GPL");
......@@ -39,6 +39,7 @@ config SND_SOC_SAMSUNG_NEO1973_WM8753
depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA01
select SND_S3C24XX_I2S
select SND_SOC_WM8753
select SND_SOC_LM4857
help
Say Y if you want to add support for SoC audio on smdk2440
with the WM8753.
......
/*
* lm4857.h -- ALSA Soc Audio Layer
*
* Copyright 2007 Wolfson Microelectronics PLC.
* Author: Graeme Gregory
* graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Revision history
* 18th Jun 2007 Initial version.
*/
#ifndef LM4857_H_
#define LM4857_H_
/* The register offsets in the cache array */
#define LM4857_MVOL 0
#define LM4857_LVOL 1
#define LM4857_RVOL 2
#define LM4857_CTRL 3
/* the shifts required to set these bits */
#define LM4857_3D 5
#define LM4857_WAKEUP 5
#define LM4857_EPGAIN 4
#endif /*LM4857_H_*/
......@@ -17,11 +17,9 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#include <asm/mach-types.h>
#include <mach/regs-clock.h>
......@@ -33,12 +31,10 @@
#include <plat/regs-iis.h>
#include "../codecs/wm8753.h"
#include "lm4857.h"
#include "dma.h"
#include "s3c24xx-i2s.h"
static struct snd_soc_card neo1973;
static struct i2c_client *i2c;
static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
......@@ -213,85 +209,7 @@ static struct snd_soc_ops neo1973_voice_ops = {
.hw_free = neo1973_voice_hw_free,
};
static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0};
static void lm4857_write_regs(void)
{
pr_debug("Entered %s\n", __func__);
if (i2c_master_send(i2c, lm4857_regs, 4) != 4)
printk(KERN_ERR "lm4857: i2c write failed\n");
}
static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
int reg = mc->reg;
int shift = mc->shift;
int mask = mc->max;
pr_debug("Entered %s\n", __func__);
ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask;
return 0;
}
static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
int reg = mc->reg;
int shift = mc->shift;
int mask = mc->max;
if (((lm4857_regs[reg] >> shift) & mask) ==
ucontrol->value.integer.value[0])
return 0;
lm4857_regs[reg] &= ~(mask << shift);
lm4857_regs[reg] |= ucontrol->value.integer.value[0] << shift;
lm4857_write_regs();
return 1;
}
static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
u8 value = lm4857_regs[LM4857_CTRL] & 0x0F;
pr_debug("Entered %s\n", __func__);
if (value)
value -= 5;
ucontrol->value.integer.value[0] = value;
return 0;
}
static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
u8 value = ucontrol->value.integer.value[0];
pr_debug("Entered %s\n", __func__);
if (value)
value += 5;
if ((lm4857_regs[LM4857_CTRL] & 0x0F) == value)
return 0;
lm4857_regs[LM4857_CTRL] &= 0xF0;
lm4857_regs[LM4857_CTRL] |= value;
lm4857_write_regs();
return 1;
}
static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
SND_SOC_DAPM_LINE("Audio Out", NULL),
SND_SOC_DAPM_LINE("GSM Line Out", NULL),
SND_SOC_DAPM_LINE("GSM Line In", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
......@@ -299,12 +217,7 @@ static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
};
static const struct snd_soc_dapm_route dapm_routes[] = {
/* Connections to the lm4857 amp */
{"Audio Out", NULL, "LOUT1"},
{"Audio Out", NULL, "ROUT1"},
static const struct snd_soc_dapm_route neo1973_wm8753_routes[] = {
/* Connections to the GSM Module */
{"GSM Line Out", NULL, "MONO1"},
{"GSM Line Out", NULL, "MONO2"},
......@@ -324,46 +237,14 @@ static const struct snd_soc_dapm_route dapm_routes[] = {
{"ACIN", NULL, "ACOP"},
};
static const char *lm4857_mode[] = {
"Off",
"Call Speaker",
"Stereo Speakers",
"Stereo Speakers + Headphones",
"Headphones"
};
static const struct soc_enum lm4857_mode_enum[] = {
SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode),
};
static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
SOC_DAPM_PIN_SWITCH("Audio Out"),
static const struct snd_kcontrol_new neo1973_wm8753_controls[] = {
SOC_DAPM_PIN_SWITCH("GSM Line Out"),
SOC_DAPM_PIN_SWITCH("GSM Line In"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
SOC_DAPM_PIN_SWITCH("Call Mic"),
SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0,
lm4857_get_reg, lm4857_set_reg, stereo_tlv),
SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0,
lm4857_get_reg, lm4857_set_reg, stereo_tlv),
SOC_SINGLE_EXT_TLV("Amp Mono Playback Volume", LM4857_MVOL, 0, 31, 0,
lm4857_get_reg, lm4857_set_reg, mono_tlv),
SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0],
lm4857_get_mode, lm4857_set_mode),
SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0,
lm4857_get_reg, lm4857_set_reg),
SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0,
lm4857_get_reg, lm4857_set_reg),
SOC_SINGLE_EXT("Amp Fast Wakeup Playback Switch", LM4857_CTRL, 5, 1, 0,
lm4857_get_reg, lm4857_set_reg),
SOC_SINGLE_EXT("Amp Earpiece 6dB Playback Switch", LM4857_CTRL, 4, 1, 0,
lm4857_get_reg, lm4857_set_reg),
};
/*
* This is an example machine initialisation for a wm8753 connected to a
* neo1973 II. It is missing logic to detect hp/mic insertions and logic
......@@ -390,23 +271,60 @@ static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
ARRAY_SIZE(wm8753_dapm_widgets));
/* set endpoints to default mode */
snd_soc_dapm_disable_pin(dapm, "Audio Out");
snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
snd_soc_dapm_disable_pin(dapm, "GSM Line In");
snd_soc_dapm_disable_pin(dapm, "Headset Mic");
snd_soc_dapm_disable_pin(dapm, "Call Mic");
/* add neo1973 specific controls */
err = snd_soc_add_controls(codec, wm8753_neo1973_controls,
ARRAY_SIZE(8753_neo1973_controls));
err = snd_soc_add_controls(codec, neo1973_wm8753_controls,
ARRAY_SIZE(neo1973_wm8753_controls));
if (err < 0)
return err;
/* set up neo1973 specific audio routes */
err = snd_soc_dapm_add_routes(dapm, dapm_routes,
ARRAY_SIZE(dapm_routes));
err = snd_soc_dapm_add_routes(dapm, neo1973_wm8753_routes,
ARRAY_SIZE(neo1973_wm8753_routes));
snd_soc_dapm_sync(dapm);
return 0;
}
static const struct snd_soc_dapm_route neo1973_lm4857_routes[] = {
{"Amp IN", NULL, "ROUT1"},
{"Amp IN", NULL, "LOUT1"},
{"Handset Spk", NULL, "Amp EP"},
{"Stereo Out", NULL, "Amp LS"},
{"Headphone", NULL, "Amp HP"},
};
static const struct snd_soc_dapm_widget neo1973_lm4857_dapm_widgets[] = {
SND_SOC_DAPM_SPK("Handset Spk", NULL),
SND_SOC_DAPM_SPK("Stereo Out", NULL),
SND_SOC_DAPM_HP("Headphone", NULL),
};
static int neo1973_lm4857_init(struct snd_soc_dapm_context *dapm)
{
int ret;
ret = snd_soc_dapm_new_controls(dapm, neo1973_lm4857_dapm_widgets,
ARRAY_SIZE(neo1973_lm4857_dapm_widgets));
if (ret)
return ret;
ret = snd_soc_dapm_add_routes(dapm, neo1973_lm4857_routes,
ARRAY_SIZE(neo1973_lm4857_routes));
if (ret)
return ret;
snd_soc_dapm_ignore_suspend(dapm, "Stereo Out");
snd_soc_dapm_ignore_suspend(dapm, "Handset Spk");
snd_soc_dapm_ignore_suspend(dapm, "Headphone");
snd_soc_dapm_sync(dapm);
return 0;
}
......@@ -449,83 +367,29 @@ static struct snd_soc_dai_link neo1973_dai[] = {
},
};
static struct snd_soc_card neo1973 = {
.name = "neo1973",
.dai_link = neo1973_dai,
.num_links = ARRAY_SIZE(neo1973_dai),
static struct snd_soc_aux_dev neo1973_aux_devs[] = {
{
.name = "lm4857",
.codec_name = "lm4857.0-007c",
.init = neo1973_lm4857_init,
},
};
static int lm4857_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
pr_debug("Entered %s\n", __func__);
i2c = client;
lm4857_write_regs();
return 0;
}
static int lm4857_i2c_remove(struct i2c_client *client)
{
pr_debug("Entered %s\n", __func__);
i2c = NULL;
return 0;
}
static u8 lm4857_state;
static int lm4857_suspend(struct i2c_client *dev, pm_message_t state)
{
pr_debug("Entered %s\n", __func__);
dev_dbg(&dev->dev, "lm4857_suspend\n");
lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf;
if (lm4857_state) {
lm4857_regs[LM4857_CTRL] &= 0xf0;
lm4857_write_regs();
}
return 0;
}
static int lm4857_resume(struct i2c_client *dev)
{
pr_debug("Entered %s\n", __func__);
if (lm4857_state) {
lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f);
lm4857_write_regs();
}
return 0;
}
static void lm4857_shutdown(struct i2c_client *dev)
{
pr_debug("Entered %s\n", __func__);
dev_dbg(&dev->dev, "lm4857_shutdown\n");
lm4857_regs[LM4857_CTRL] &= 0xf0;
lm4857_write_regs();
}
static const struct i2c_device_id lm4857_i2c_id[] = {
{ "neo1973_lm4857", 0 },
{ }
static struct snd_soc_codec_conf neo1973_codec_conf[] = {
{
.dev_name = "lm4857.0-007c",
.name_prefix = "Amp",
},
};
static struct i2c_driver lm4857_i2c_driver = {
.driver = {
.name = "LM4857 I2C Amp",
.owner = THIS_MODULE,
},
.suspend = lm4857_suspend,
.resume = lm4857_resume,
.shutdown = lm4857_shutdown,
.probe = lm4857_i2c_probe,
.remove = lm4857_i2c_remove,
.id_table = lm4857_i2c_id,
static struct snd_soc_card neo1973 = {
.name = "neo1973",
.dai_link = neo1973_dai,
.num_links = ARRAY_SIZE(neo1973_dai),
.aux_dev = neo1973_aux_devs,
.num_aux_devs = ARRAY_SIZE(neo1973_aux_devs),
.codec_conf = neo1973_codec_conf,
.num_configs = ARRAY_SIZE(neo1973_codec_conf),
};
static struct platform_device *neo1973_snd_device;
......@@ -554,8 +418,6 @@ static int __init neo1973_init(void)
return ret;
}
ret = i2c_add_driver(&lm4857_i2c_driver);
if (ret != 0)
platform_device_unregister(neo1973_snd_device);
......@@ -566,7 +428,6 @@ static void __exit neo1973_exit(void)
{
pr_debug("Entered %s\n", __func__);
i2c_del_driver(&lm4857_i2c_driver);
platform_device_unregister(neo1973_snd_device);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment