ARM: dts: Use labels for overriding nodes in exynos4210-trats

Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

arch/arm/boot/dts/exynos4210-trats.dts

@@ -89,42 +89,6 @@ vt_core_15v_reg: regulator-5 {
 		};
 	};
 
-	hsotg@12480000 {
-		vusb_d-supply = <&vusb_reg>;
-		vusb_a-supply = <&vusbdac_reg>;
-		dr_mode = "peripheral";
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -158,7 +122,145 @@ ok-key {
 		};
 	};
 
-	i2c@13890000 {
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 2 2>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 4 4>;
+			       };
+		       };
+		};
+	};
+
+	camera {
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+		status = "okay";
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+					<&clock CLK_SCLK_FIMC0>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+					<&clock CLK_SCLK_FIMC1>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+					<&clock CLK_SCLK_FIMC2>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+					<&clock CLK_SCLK_FIMC3>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+	};
+};
+
+&dsi_0 {
+	vddcore-supply = <&vusb_reg>;
+	vddio-supply = <&vmipi_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+				samsung,burst-clock-frequency = <500000000>;
+				samsung,esc-clock-frequency = <20000000>;
+			};
+		};
+	};
+
+	panel@0 {
+		reg = <0>;
+		compatible = "samsung,s6e8aa0";
+		vdd3-supply = <&vcclcd_reg>;
+		vci-supply = <&vlcd_reg>;
+		reset-gpios = <&gpy4 5 0>;
+		power-on-delay= <50>;
+		reset-delay = <100>;
+		init-delay = <100>;
+		flip-horizontal;
+		flip-vertical;
+		panel-width-mm = <58>;
+		panel-height-mm = <103>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <57153600>;
+				hactive = <720>;
+				vactive = <1280>;
+				hfront-porch = <5>;
+				hback-porch = <5>;
+				hsync-len = <5>;
+				vfront-porch = <13>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+
+		port {
+			dsi_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimd {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&vusb_reg>;
+	vusb_a-supply = <&vusbdac_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
 	samsung,i2c-max-bus-freq = <400000>;
@@ -176,9 +278,9 @@ mms114-touchscreen@48 {
 		avdd-supply = <&tsp_reg>;
 		vdd-supply = <&tsp_reg>;
 	};
-	};
+};
 
-	i2c@138B0000 {
+&i2c_5 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
 	samsung,i2c-max-bus-freq = <100000>;
@@ -351,135 +453,33 @@ safe2_sreg: ESAFEOUT2 {
 			};
 		};
 	};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	dsi_0: dsi@11C80000 {
-		vddcore-supply = <&vusb_reg>;
-		vddio-supply = <&vmipi_reg>;
-		samsung,pll-clock-frequency = <24000000>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				dsi_out: endpoint {
-					remote-endpoint = <&dsi_in>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-				};
-			};
-		};
-
-		panel@0 {
-			reg = <0>;
-			compatible = "samsung,s6e8aa0";
-			vdd3-supply = <&vcclcd_reg>;
-			vci-supply = <&vlcd_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			power-on-delay= <50>;
-			reset-delay = <100>;
-			init-delay = <100>;
-			flip-horizontal;
-			flip-vertical;
-			panel-width-mm = <58>;
-			panel-height-mm = <103>;
-
-			display-timings {
-				timing-0 {
-					clock-frequency = <57153600>;
-					hactive = <720>;
-					vactive = <1280>;
-					hfront-porch = <5>;
-					hback-porch = <5>;
-					hsync-len = <5>;
-					vfront-porch = <13>;
-					vback-porch = <1>;
-					vsync-len = <2>;
-				};
-			};
-
-			port {
-				dsi_in: endpoint {
-					remote-endpoint = <&dsi_out>;
-				};
-			};
-		};
-	};
-
-	fimd@11c00000 {
-		status = "okay";
-	};
+};
 
-	tmu@100C0000 {
+&sdhci_0 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vemmc_reg>;
 	status = "okay";
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 2 2>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 4 4>;
-			       };
-		       };
-		};
-	};
+};
 
-	camera {
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
+&serial_0 {
 	status = "okay";
+};
 
-		fimc_0: fimc@11800000 {
+&serial_1 {
 	status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-					<&clock CLK_SCLK_FIMC0>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
+};
 
-		fimc_1: fimc@11810000 {
+&serial_2 {
 	status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-					<&clock CLK_SCLK_FIMC1>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
+};
 
-		fimc_2: fimc@11820000 {
+&serial_3 {
 	status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-					<&clock CLK_SCLK_FIMC2>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
+};
 
-		fimc_3: fimc@11830000 {
+&tmu {
 	status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-					<&clock CLK_SCLK_FIMC3>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-	};
 };