hwmon: (f71805f) List the F71806F/FG as supported

The Fintek F71806F/FG is compatible with the F71872F/FG, so it is
already supported by the f71805f hardware monitoring driver. In fact,
both chips have the same chip ID, so the driver can't even
differentiate between them.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Documentation/hwmon/f71805f

@@ -6,6 +6,10 @@ Supported chips:
     Prefix: 'f71805f'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71806F/FG
+    Prefix: 'f71872f'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Available from the Fintek website
   * Fintek F71872F/FG
     Prefix: 'f71872f'
     Addresses scanned: none, address read from Super I/O config space
@@ -38,6 +42,9 @@ The Fintek F71872F/FG Super I/O chip is almost the same, with two
 additional internal voltages monitored (VSB and battery). It also features
 6 VID inputs. The VID inputs are not yet supported by this driver.
 
+The Fintek F71806F/FG Super-I/O chip is essentially the same as the
+F71872F/FG, and is undistinguishable therefrom.
+
 The driver assumes that no more than one chip is present, which seems
 reasonable.
 

drivers/hwmon/Kconfig

@@ -206,12 +206,12 @@ config SENSORS_DS1621
 	  will be called ds1621.
 
 config SENSORS_F71805F
-	tristate "Fintek F71805F/FG and F71872F/FG"
+	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for hardware monitoring
-	  features of the Fintek F71805F/FG and F71872F/FG Super-I/O
-	  chips.
+	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
+	  Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called f71805f.

drivers/hwmon/f71805f.c

@@ -10,6 +10,9 @@
  * The F71872F/FG is almost the same, with two more voltages monitored,
  * and 6 VID inputs.
  *
+ * The F71806F/FG is essentially the same as the F71872F/FG. It even has
+ * the same chip ID, so the driver can't differentiate between.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -1485,7 +1488,7 @@ static int __init f71805f_find(int sioaddr, unsigned short *address,
 
 	static const char *names[] = {
 		"F71805F/FG",
-		"F71872F/FG",
+		"F71872F/FG or F71806F/FG",
 	};
 
 	superio_enter(sioaddr);