Commit 9d480158 authored by Kan Liang's avatar Kan Liang Committed by Peter Zijlstra

perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3

There may be a kernel panic on the Haswell server and the Broadwell
server, if the snbep_pci2phy_map_init() return error.

The uncore_extra_pci_dev[HSWEP_PCI_PCU_3] is used in the cpu_init() to
detect the existence of the SBOX, which is a MSR type of PMON unit.
The uncore_extra_pci_dev is allocated in the uncore_pci_init(). If the
snbep_pci2phy_map_init() returns error, perf doesn't initialize the
PCI type of the PMON units, so the uncore_extra_pci_dev will not be
allocated. But perf may continue initializing the MSR type of PMON
units. A null dereference kernel panic will be triggered.

The sockets in a Haswell server or a Broadwell server are identical.
Only need to detect the existence of the SBOX once.
Current perf probes all available PCU devices and stores them into the
uncore_extra_pci_dev. It's unnecessary.
Use the pci_get_device() to replace the uncore_extra_pci_dev. Only
detect the existence of the SBOX on the first available PCU device once.

Factor out hswep_has_limit_sbox(), since the Haswell server and the
Broadwell server uses the same way to detect the existence of the SBOX.

Add some macros to replace the magic number.

Fixes: 5306c31c ("perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes")
Reported-by: default avatarSteve Wahl <steve.wahl@hpe.com>
Signed-off-by: default avatarKan Liang <kan.liang@linux.intel.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: default avatarSteve Wahl <steve.wahl@hpe.com>
Link: https://lkml.kernel.org/r/1618521764-100923-1-git-send-email-kan.liang@linux.intel.com
parent bf05bf16
...@@ -1159,7 +1159,6 @@ enum { ...@@ -1159,7 +1159,6 @@ enum {
SNBEP_PCI_QPI_PORT0_FILTER, SNBEP_PCI_QPI_PORT0_FILTER,
SNBEP_PCI_QPI_PORT1_FILTER, SNBEP_PCI_QPI_PORT1_FILTER,
BDX_PCI_QPI_PORT2_FILTER, BDX_PCI_QPI_PORT2_FILTER,
HSWEP_PCI_PCU_3,
}; };
static int snbep_qpi_hw_config(struct intel_uncore_box *box, struct perf_event *event) static int snbep_qpi_hw_config(struct intel_uncore_box *box, struct perf_event *event)
...@@ -2857,22 +2856,33 @@ static struct intel_uncore_type *hswep_msr_uncores[] = { ...@@ -2857,22 +2856,33 @@ static struct intel_uncore_type *hswep_msr_uncores[] = {
NULL, NULL,
}; };
void hswep_uncore_cpu_init(void) #define HSWEP_PCU_DID 0x2fc0
#define HSWEP_PCU_CAPID4_OFFET 0x94
#define hswep_get_chop(_cap) (((_cap) >> 6) & 0x3)
static bool hswep_has_limit_sbox(unsigned int device)
{ {
int pkg = boot_cpu_data.logical_proc_id; struct pci_dev *dev = pci_get_device(PCI_VENDOR_ID_INTEL, device, NULL);
u32 capid4;
if (!dev)
return false;
pci_read_config_dword(dev, HSWEP_PCU_CAPID4_OFFET, &capid4);
if (!hswep_get_chop(capid4))
return true;
return false;
}
void hswep_uncore_cpu_init(void)
{
if (hswep_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores) if (hswep_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
hswep_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores; hswep_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
/* Detect 6-8 core systems with only two SBOXes */ /* Detect 6-8 core systems with only two SBOXes */
if (uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3]) { if (hswep_has_limit_sbox(HSWEP_PCU_DID))
u32 capid4;
pci_read_config_dword(uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3],
0x94, &capid4);
if (((capid4 >> 6) & 0x3) == 0)
hswep_uncore_sbox.num_boxes = 2; hswep_uncore_sbox.num_boxes = 2;
}
uncore_msr_uncores = hswep_msr_uncores; uncore_msr_uncores = hswep_msr_uncores;
} }
...@@ -3135,11 +3145,6 @@ static const struct pci_device_id hswep_uncore_pci_ids[] = { ...@@ -3135,11 +3145,6 @@ static const struct pci_device_id hswep_uncore_pci_ids[] = {
.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, .driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
SNBEP_PCI_QPI_PORT1_FILTER), SNBEP_PCI_QPI_PORT1_FILTER),
}, },
{ /* PCU.3 (for Capability registers) */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2fc0),
.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
HSWEP_PCI_PCU_3),
},
{ /* end: all zeroes */ } { /* end: all zeroes */ }
}; };
...@@ -3231,27 +3236,18 @@ static struct event_constraint bdx_uncore_pcu_constraints[] = { ...@@ -3231,27 +3236,18 @@ static struct event_constraint bdx_uncore_pcu_constraints[] = {
EVENT_CONSTRAINT_END EVENT_CONSTRAINT_END
}; };
#define BDX_PCU_DID 0x6fc0
void bdx_uncore_cpu_init(void) void bdx_uncore_cpu_init(void)
{ {
int pkg = topology_phys_to_logical_pkg(boot_cpu_data.phys_proc_id);
if (bdx_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores) if (bdx_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
bdx_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores; bdx_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
uncore_msr_uncores = bdx_msr_uncores; uncore_msr_uncores = bdx_msr_uncores;
/* BDX-DE doesn't have SBOX */
if (boot_cpu_data.x86_model == 86) {
uncore_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
/* Detect systems with no SBOXes */ /* Detect systems with no SBOXes */
} else if (uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3]) { if ((boot_cpu_data.x86_model == 86) || hswep_has_limit_sbox(BDX_PCU_DID))
struct pci_dev *pdev; uncore_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
u32 capid4;
pdev = uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3];
pci_read_config_dword(pdev, 0x94, &capid4);
if (((capid4 >> 6) & 0x3) == 0)
bdx_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
}
hswep_uncore_pcu.constraints = bdx_uncore_pcu_constraints; hswep_uncore_pcu.constraints = bdx_uncore_pcu_constraints;
} }
...@@ -3472,11 +3468,6 @@ static const struct pci_device_id bdx_uncore_pci_ids[] = { ...@@ -3472,11 +3468,6 @@ static const struct pci_device_id bdx_uncore_pci_ids[] = {
.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, .driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
BDX_PCI_QPI_PORT2_FILTER), BDX_PCI_QPI_PORT2_FILTER),
}, },
{ /* PCU.3 (for Capability registers) */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fc0),
.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
HSWEP_PCI_PCU_3),
},
{ /* end: all zeroes */ } { /* end: all zeroes */ }
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment