Commit 9d71d3cd authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "This is the set of device tree changes, mostly covering new hardware
  support, with 577 patches touching a little over 500 files.

  There are five new Arm SoCs supported in this release, all of them for
  existing SoC families:

   - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
     devices and Android Set-top-box designs, along with the
     "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
     Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
     single-board computer.

   - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
     the iW-RainboW-G21D-Qseven-RZG1H board/SoM

   - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
     Advance game console

  Newly added machines on already supported SoCs are:

   - AMLogic S905D based Smartlabs SML-5442TW TV box

   - AMLogic S905X3 based ODROID-C4 SBC

   - AMLogic S922XH based Beelink GT-King Pro TV box

   - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC

   - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
     OpenPower P9 "Nicole"

   - Marvell Kirkwood based Check Point L-50 router

   - Mediatek MT8173 based Elm/Hana Chromebook laptops

   - Microchip SAMA5D2 "Industrial Connectivity Platform" reference
     board

   - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit

   - Octavo OSDMP15x based Linux Automation MC-1 development board

   - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone

   - Realtek RTD1295 based Xnano X5 TV Box

   - STMicroelectronics STM32MP1 based Stinger96 single-board computer
     and IoT Box

   - Samsung Exynos4210 based based Samsung Galaxy S2 phone

   - Socionext Uniphier based Akebi96 SBC

   - TI Keystone based K2G Evaluation board

   - TI am5729 based Beaglebone-AI development board

  Include device descriptions for additional hardware support in
  existing SoCs and machines based on all major SoC platforms:

   - AMlogic Meson

   - Allwinner sunxi

   - Arm Juno/VFP/Vexpress/Integrator

   - Broadcom bcm283x/bcm2711

   - Hisilicon hi6220

   - Marvell EBU

   - Mediatek MT27xx, MT76xx, MT81xx and MT67xx

   - Microchip SAMA5D2

   - NXP i.MX6/i.MX7/i.MX8 and Layerscape

   - Nvidia Tegra

   - Qualcomm Snapdragon

   - Renesas r8a77961, r8a7791

   - Rockchips RK32xx/RK33xx

   - ST-Ericsson ux500

   - STMicroelectronics SMT32

   - Samsung Exynos and S5PV210

   - Socionext Uniphier

   - TI OMAP5/DRA7 and Keystone"

* tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits)
  ARM: dts: keystone: Rename "msmram" node to "sram"
  arm: dts: mt2712: add uart APDMA to device tree
  arm64: dts: mt8183: add mmc node
  arm64: dts: mt2712: add ethernet device node
  arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
  ARM: dts: mmp3: Add the fifth SD HCI
  ARM: dts: berlin*: Fix up the SDHCI node names
  ARM: dts: mmp3: Fix USB & USB PHY node names
  ARM: dts: mmp3: Fix L2 cache controller node name
  ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa910: Fix the gpio interrupt cell number
  ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
  ARM: dts: pxa168: Fix the gpio interrupt cell number
  ARM: dts: pxa168: Add missing address/size cells to i2c nodes
  ARM: dts: dove: Fix interrupt controller node name
  ARM: dts: kirkwood: Fix interrupt controller node name
  arm64: dts: Add SC9863A emmc and sd card nodes
  arm64: dts: Add SC9863A clock nodes
  arm64: dts: mt6358: add PMIC MT6358 related nodes
  ...
parents 828f3e18 9ad249ab
......@@ -107,6 +107,7 @@ properties:
- amlogic,p231
- libretech,aml-s905d-pc
- phicomm,n1
- smartlabs,sml5442tw
- const: amlogic,s905d
- const: amlogic,meson-gxl
......@@ -148,6 +149,8 @@ properties:
- description: Boards with the Amlogic Meson G12B S922X SoC
items:
- enum:
- azw,gtking
- azw,gtking-pro
- hardkernel,odroid-n2
- khadas,vim3
- ugoos,am6
......@@ -159,6 +162,7 @@ properties:
- enum:
- seirobotics,sei610
- khadas,vim3l
- hardkernel,odroid-c4
- const: amlogic,sm1
- description: Boards with the Amlogic Meson A1 A113L SoC
......
......@@ -82,6 +82,13 @@ properties:
- const: atmel,sama5d2
- const: atmel,sama5
- description: Microchip SAMA5D2 Industrial Connectivity Platform
items:
- const: microchip,sama5d2-icp
- const: atmel,sama5d27
- const: atmel,sama5d2
- const: atmel,sama5
- description: SAM9X60-EK board
items:
- const: microchip,sam9x60ek
......
......@@ -167,6 +167,7 @@ properties:
- qcom,kryo260
- qcom,kryo280
- qcom,kryo385
- qcom,kryo468
- qcom,kryo485
- qcom,scorpion
......
......@@ -119,6 +119,7 @@ properties:
- fsl,imx6q-sabreauto
- fsl,imx6q-sabrelite
- fsl,imx6q-sabresd
- kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module
- technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf
- technexion,imx6q-pico-hobbit # TechNexion i.MX6Q Pico-Hobbit
- technexion,imx6q-pico-nymph # TechNexion i.MX6Q Pico-Nymph
......@@ -170,6 +171,7 @@ properties:
- emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base
- fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board
- fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board
- kontron,imx6dl-samx6i # Kontron i.MX6 Solo SMARC Module
- technexion,imx6dl-pico-dwarf # TechNexion i.MX6DL Pico-Dwarf
- technexion,imx6dl-pico-hobbit # TechNexion i.MX6DL Pico-Hobbit
- technexion,imx6dl-pico-nymph # TechNexion i.MX6DL Pico-Nymph
......@@ -177,7 +179,9 @@ properties:
- technologic,imx6dl-ts4900
- technologic,imx6dl-ts7970
- toradex,colibri_imx6dl # Colibri iMX6 Module
- toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1
- toradex,colibri_imx6dl-eval-v3 # Colibri iMX6 Module on Colibri Evaluation Board V3
- toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3
- ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board
- ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
......
......@@ -84,6 +84,28 @@ properties:
- enum:
- mediatek,mt8135-evbp1
- const: mediatek,mt8135
- description: Google Elm (Acer Chromebook R13)
items:
- const: google,elm-rev8
- const: google,elm-rev7
- const: google,elm-rev6
- const: google,elm-rev5
- const: google,elm-rev4
- const: google,elm-rev3
- const: google,elm
- const: mediatek,mt8173
- description: Google Hana (Lenovo Chromebook N23 Yoga, C330, 300e,...)
items:
- const: google,hana-rev6
- const: google,hana-rev5
- const: google,hana-rev4
- const: google,hana-rev3
- const: google,hana
- const: mediatek,mt8173
- description: Google Hana rev7 (Poin2 Chromebook 11C)
items:
- const: google,hana-rev7
- const: mediatek,mt8173
- items:
- enum:
- mediatek,mt8173-evb
......
......@@ -37,6 +37,8 @@ description: |
msm8994
msm8996
sc7180
sdm630
sdm660
sdm845
The 'board' element must be one of the following strings:
......@@ -153,6 +155,11 @@ properties:
- qcom,sc7180-idp
- const: qcom,sc7180
- items:
- enum:
- xiaomi,lavender
- const: qcom,sdm660
- items:
- enum:
- qcom,ipq6018-cp01-c1
......
......@@ -14,6 +14,13 @@ properties:
const: '/'
compatible:
oneOf:
# RTD1195 SoC based boards
- items:
- enum:
- mele,x1000 # MeLE X1000
- realtek,horseradish # Realtek Horseradish EVB
- const: realtek,rtd1195
# RTD1293 SoC based boards
- items:
- enum:
......@@ -25,6 +32,7 @@ properties:
- enum:
- mele,v9 # MeLE V9
- probox2,ava # ProBox2 AVA
- xnano,x5 # Xnano X5
- zidoo,x9s # Zidoo X9S
- const: realtek,rtd1295
......@@ -33,4 +41,17 @@ properties:
- enum:
- synology,ds418 # Synology DiskStation DS418
- const: realtek,rtd1296
# RTD1395 SoC based boards
- items:
- enum:
- bananapi,bpi-m4 # Banana Pi BPI-M4
- realtek,lion-skin # Realtek Lion Skin EVB
- const: realtek,rtd1395
# RTD1619 SoC based boards
- items:
- enum:
- realtek,mjolnir # Realtek Mjolnir EVB
- const: realtek,rtd1619
...
......@@ -54,6 +54,16 @@ properties:
- description: RZ/G1H (R8A77420)
items:
- enum:
# iWave Systems RZ/G1H Qseven System On Module (iW-RainboW-G21M-Qseven)
- iwave,g21m
- const: renesas,r8a7742
- items:
- enum:
# iWave Systems RZ/G1H Qseven Development Platform (iW-RainboW-G21D-Qseven)
- iwave,g21d
- const: iwave,g21m
- const: renesas,r8a7742
- description: RZ/G1M (R8A77430)
......
......@@ -358,6 +358,11 @@ properties:
- const: haoyu,marsboard-rk3066
- const: rockchip,rk3066a
- description: Hardkernel Odroid Go Advance
items:
- const: hardkernel,rk3326-odroid-go2
- const: rockchip,rk3326
- description: Hugsun X99 TV Box
items:
- const: hugsun,x99
......
......@@ -52,6 +52,7 @@ properties:
items:
- enum:
- insignal,origen # Insignal Origen
- samsung,i9100 # Samsung Galaxy S2 (GT-I9100)
- samsung,smdkv310 # Samsung SMDKV310 eval
- samsung,trats # Samsung Tizen Reference
- samsung,universal_c210 # Samsung C210
......
......@@ -51,6 +51,7 @@ properties:
- description: LD20 SoC boards
items:
- enum:
- socionext,uniphier-ld20-akebi96
- socionext,uniphier-ld20-global
- socionext,uniphier-ld20-ref
- const: socionext,uniphier-ld20
......
......@@ -38,6 +38,9 @@ properties:
- items:
- enum:
- arrow,stm32mp157a-avenger96 # Avenger96
- lxa,stm32mp157c-mc1
- shiratech,stm32mp157a-iot-box # IoT Box
- shiratech,stm32mp157a-stinger96 # Stinger96
- st,stm32mp157c-ed1
- st,stm32mp157a-dk1
- st,stm32mp157c-dk2
......
......@@ -561,6 +561,11 @@ properties:
- const: olimex,a20-olinuxino-lime
- const: allwinner,sun7i-a20
- description: Olimex A20-OlinuXino LIME (with eMMC)
items:
- const: olimex,a20-olinuxino-lime-emmc
- const: allwinner,sun7i-a20
- description: Olimex A20-OlinuXino LIME2
items:
- const: olimex,a20-olinuxino-lime2
......
......@@ -41,6 +41,7 @@ properties:
- amlogic,meson-gxbb-mali
- amlogic,meson-gxl-mali
- hisilicon,hi6220-mali
- mediatek,mt7623-mali
- rockchip,rk3328-mali
- const: arm,mali-450
......@@ -130,6 +131,7 @@ allOf:
- amlogic,meson8-mali
- amlogic,meson8b-mali
- hisilicon,hi6220-mali
- mediatek,mt7623-mali
- rockchip,rk3036-mali
- rockchip,rk3066-mali
- rockchip,rk3188-mali
......
......@@ -8,6 +8,7 @@ Required properties:
"mediatek,mt2712-i2c": for MediaTek MT2712
"mediatek,mt6577-i2c": for MediaTek MT6577
"mediatek,mt6589-i2c": for MediaTek MT6589
"mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797
"mediatek,mt7622-i2c": for MediaTek MT7622
"mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
"mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
......
......@@ -28,6 +28,7 @@ properties:
- enum:
- qcom,msm8996-smmu-v2
- qcom,msm8998-smmu-v2
- qcom,sc7180-smmu-v2
- qcom,sdm845-smmu-v2
- const: qcom,smmu-v2
......
......@@ -17,6 +17,7 @@ description:
properties:
compatible:
enum:
- renesas,r8a7742-sysc # RZ/G1H
- renesas,r8a7743-sysc # RZ/G1M
- renesas,r8a7744-sysc # RZ/G1N
- renesas,r8a7745-sysc # RZ/G1E
......
......@@ -23,6 +23,7 @@ description: |
properties:
compatible:
enum:
- renesas,r8a7742-rst # RZ/G1H
- renesas,r8a7743-rst # RZ/G1M
- renesas,r8a7744-rst # RZ/G1N
- renesas,r8a7745-rst # RZ/G1E
......
......@@ -589,6 +589,8 @@ patternProperties:
description: LSI Corp. (LSI Logic)
"^lwn,.*":
description: Liebherr-Werk Nenzing GmbH
"^lxa,.*":
description: Linux Automation GmbH
"^macnica,.*":
description: Macnica Americas
"^mapleboard,.*":
......@@ -906,6 +908,8 @@ patternProperties:
description: Sharp Corporation
"^shimafuji,.*":
description: Shimafuji Electric, Inc.
"^shiratech,.*":
description: Shiratech Solutions
"^si-en,.*":
description: Si-En Technology Ltd.
"^si-linux,.*":
......@@ -942,6 +946,8 @@ patternProperties:
description: Sitronix Technology Corporation
"^skyworks,.*":
description: Skyworks Solutions, Inc.
"^smartlabs,.*":
description: SmartLabs LLC
"^smsc,.*":
description: Standard Microsystems Corporation
"^snps,.*":
......@@ -1133,6 +1139,8 @@ patternProperties:
description: Shenzhen Xinpeng Technology Co., Ltd
"^xlnx,.*":
description: Xilinx
"^xnano,.*":
description: Xnano
"^xunlong,.*":
description: Shenzhen Xunlong Software CO.,Limited
"^xylon,.*":
......
......@@ -55,6 +55,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
at91-nattis-2-natte-2.dtb \
at91-sama5d27_som1_ek.dtb \
at91-sama5d27_wlsom1_ek.dtb \
at91-sama5d2_icp.dtb \
at91-sama5d2_ptc_ek.dtb \
at91-sama5d2_xplained.dtb \
at91-sama5d3_xplained.dtb \
......@@ -181,6 +182,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \
exynos3250-monk.dtb \
exynos3250-rinato.dtb
dtb-$(CONFIG_ARCH_EXYNOS4) += \
exynos4210-i9100.dtb \
exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
......@@ -237,6 +239,7 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \
hisi-x5hd2-dkb.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += \
integratorap.dtb \
integratorap-im-pd1.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_IXP4XX) += \
intel-ixp42x-linksys-nslu2.dtb \
......@@ -279,6 +282,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-iomega_ix2_200.dtb \
kirkwood-is2.dtb \
kirkwood-km_kirkwood.dtb \
kirkwood-l-50.dtb \
kirkwood-laplug.dtb \
kirkwood-linkstation-lsqvl.dtb \
kirkwood-linkstation-lsvl.dtb \
......@@ -412,6 +416,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-aristainetos2_4.dtb \
imx6dl-aristainetos2_7.dtb \
imx6dl-colibri-eval-v3.dtb \
imx6dl-colibri-v1_1-eval-v3.dtb \
imx6dl-cubox-i.dtb \
imx6dl-cubox-i-emmc-som-v15.dtb \
imx6dl-cubox-i-som-v15.dtb \
......@@ -832,6 +837,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
am57xx-beagle-x15.dtb \
am57xx-beagle-x15-revb1.dtb \
am57xx-beagle-x15-revc.dtb \
am5729-beagleboneai.dtb \
am57xx-cl-som-am57x.dtb \
am57xx-sbc-am57x.dtb \
am572x-idk.dtb \
......@@ -896,6 +902,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \
dtb-$(CONFIG_ARCH_RDA) += \
rda8810pl-orangepi-2g-iot.dtb \
rda8810pl-orangepi-i96.dtb
dtb-$(CONFIG_ARCH_REALTEK) += \
rtd1195-horseradish.dtb \
rtd1195-mele-x1000.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb \
arm-realview-pb11mp.dtb \
......@@ -917,6 +926,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
r7s9210-rza2mevb.dtb \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7742-iwg21d-q7.dtb \
r8a7743-iwg20d-q7.dtb \
r8a7743-iwg20d-q7-dbcm-ca.dtb \
r8a7743-sk-rzg1m.dtb \
......@@ -1029,11 +1039,15 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb \
stm32mp157a-avenger96.dtb \
stm32mp157a-dhcor-avenger96.dtb \
stm32mp157a-dk1.dtb \
stm32mp157a-iot-box.dtb \
stm32mp157a-stinger96.dtb \
stm32mp157c-dhcom-pdk2.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb
stm32mp157c-ev1.dtb \
stm32mp157c-lxa-mc1.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
......@@ -1110,6 +1124,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-olimex-som204-evb.dtb \
sun7i-a20-olimex-som204-evb-emmc.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime-emmc.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
......@@ -1339,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-wedge40.dtb \
aspeed-bmc-facebook-wedge100.dtb \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \
......@@ -1347,6 +1363,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-mihawk.dtb \
aspeed-bmc-opp-nicole.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
aspeed-bmc-opp-swift.dtb \
......
......@@ -10,6 +10,7 @@
#include "dra7-mmc-iodelay.dtsi"
#include "dra72x-mmc-iodelay.dtsi"
#include "am57xx-idk-common.dtsi"
#include "dra7-ipu-dsp-common.dtsi"
/ {
model = "TI AM5718 IDK";
......@@ -20,6 +21,33 @@ memory@80000000 {
reg = <0x0 0x80000000 0x0 0x40000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ipu2_memory_region: ipu2-memory@95800000 {
compatible = "shared-dma-pool";
reg = <0x0 0x95800000 0x0 0x3800000>;
reusable;
status = "okay";
};
dsp1_memory_region: dsp1-memory@99000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x99000000 0x0 0x4000000>;
reusable;
status = "okay";
};
ipu1_memory_region: ipu1-memory@9d000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x9d000000 0x0 0x2000000>;
reusable;
status = "okay";
};
};
leds {
compatible = "gpio-leds";
cpu0-led {
......@@ -148,21 +176,19 @@ &sn65hvs882 {
load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
&ipu2 {
status = "okay";
};
memory-region = <&ipu2_memory_region>;
};
&mailbox6 {
&ipu1 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
memory-region = <&ipu1_memory_region>;
};
&dsp1 {
status = "okay";
};
memory-region = <&dsp1_memory_region>;
};
&pcie1_rc {
......
This diff is collapsed.
......@@ -6,6 +6,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
#include "dra74-ipu-dsp-common.dtsi"
/ {
memory@0 {
......@@ -13,6 +14,40 @@ memory@0 {
reg = <0x0 0x80000000 0x0 0x80000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ipu2_memory_region: ipu2-memory@95800000 {
compatible = "shared-dma-pool";
reg = <0x0 0x95800000 0x0 0x3800000>;
reusable;
status = "okay";
};
dsp1_memory_region: dsp1-memory@99000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x99000000 0x0 0x4000000>;
reusable;
status = "okay";
};
ipu1_memory_region: ipu1-memory@9d000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x9d000000 0x0 0x2000000>;
reusable;
status = "okay";
};
dsp2_memory_region: dsp2-memory@9f000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x9f000000 0x0 0x800000>;
reusable;
status = "okay";
};
};
status-leds {
compatible = "gpio-leds";
cpu0-led {
......@@ -147,22 +182,22 @@ &pcie1_rc {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
&ipu2 {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
memory-region = <&ipu2_memory_region>;
};
&mailbox6 {
&ipu1 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
memory-region = <&ipu1_memory_region>;
};
&dsp1 {
status = "okay";
};
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
memory-region = <&dsp1_memory_region>;
};
&dsp2 {
status = "okay";
};
memory-region = <&dsp2_memory_region>;
};
......@@ -7,6 +7,7 @@
#include "am5728.dtsi"
#include "am57xx-commercial-grade.dtsi"
#include "dra74x-mmc-iodelay.dtsi"
#include "dra74-ipu-dsp-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
......@@ -50,6 +51,40 @@ evm_5v0: fixedregulator-evm_5v0 {
regulator-boot-on;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ipu2_memory_region: ipu2-memory@95800000 {
compatible = "shared-dma-pool";
reg = <0x0 0x95800000 0x0 0x3800000>;
reusable;
status = "okay";
};
dsp1_memory_region: dsp1-memory@99000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x99000000 0x0 0x4000000>;
reusable;
status = "okay";
};
ipu1_memory_region: ipu1-memory@9d000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x9d000000 0x0 0x2000000>;
reusable;
status = "okay";
};
dsp2_memory_region: dsp2-memory@9f000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x9f000000 0x0 0x800000>;
reusable;
status = "okay";
};
};
vdd_3v3: fixedregulator-vdd_3v3 {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
......@@ -584,22 +619,22 @@ &mcasp3 {
rx-num-evt = <32>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
&ipu2 {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
memory-region = <&ipu2_memory_region>;
};
&mailbox6 {
&ipu1 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
memory-region = <&ipu1_memory_region>;
};
&dsp1 {
status = "okay";
};
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
memory-region = <&dsp1_memory_region>;
};
&dsp2 {
status = "okay";
};
memory-region = <&dsp2_memory_region>;
};
......@@ -35,6 +35,16 @@ v3_3d: fixedregulator-v3_3d {
regulator-boot-on;
};
v1_2d: fixedregulator-v1_2d {
compatible = "regulator-fixed";
regulator-name = "V1_2D";
vin-supply = <&vmain>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
vtt_fixed: fixedregulator-vtt {
/* TPS51200 */
compatible = "regulator-fixed";
......@@ -139,6 +149,12 @@ tpd12s015_out: endpoint@0 {
};
};
};
src_clk_x1: src_clk_x1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <20000000>;
};
};
&dra7_pmx_core {
......@@ -378,6 +394,32 @@ tpic2810: tpic2810@60 {
gpio-controller;
#gpio-cells = <2>;
};
dsi_bridge: tc358778@e {
compatible = "toshiba,tc358778", "toshiba,tc358768";
reg = <0xe>;
status = "disabled";
clocks = <&src_clk_x1>;
clock-names = "refclk";
vddc-supply = <&v1_2d>;
vddmipi-supply = <&v1_2d>;
vddio-supply = <&v3_3d>;
dsi_bridge_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
rgb_in: endpoint {
remote-endpoint = <&dpi_out>;
data-lines = <24>;
};
};
};
};
};
&mcspi3 {
......@@ -543,4 +585,20 @@ hdmi_out: endpoint {
&dss {
status = "okay";
vdda_video-supply = <&ldoln_reg>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpi_out: endpoint {
remote-endpoint = <&rgb_in>;
data-lines = <24>;
};
};
};
};
......@@ -114,7 +114,6 @@ i2c0: i2c@11000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <31>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......@@ -124,7 +123,6 @@ i2c1: i2c@11100 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <32>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......
......@@ -236,7 +236,6 @@ i2c0: i2c@11000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......@@ -247,7 +246,6 @@ i2c1: i2c@11100 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......
......@@ -153,7 +153,6 @@ i2c0: i2c@11000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......@@ -164,7 +163,6 @@ i2c1: i2c@11100 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......
......@@ -108,7 +108,6 @@ i2c0: i2c@11000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......@@ -119,7 +118,6 @@ i2c1: i2c@11100 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......@@ -130,7 +128,6 @@ i2c2: i2c@11200 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......@@ -141,7 +138,6 @@ i2c3: i2c@11300 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
......
......@@ -213,3 +213,7 @@ &i2c14 {
&i2c15 {
status = "okay";
};
&fsim0 {
status = "okay";
};
......@@ -5,6 +5,7 @@
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/i2c/i2c.h>
/ {
model = "Facebook TiogaPass BMC";
......@@ -112,13 +113,76 @@ &uart5 {
&kcs2 {
// BMC KCS channel 2
status = "okay";
kcs_addr = <0xca8>;
aspeed,lpc-io-reg = <0xca8>;
};
&kcs3 {
// BMC KCS channel 3
status = "okay";
kcs_addr = <0xca2>;
aspeed,lpc-io-reg = <0xca2>;
};
&gpio {
status = "okay";
gpio-line-names =
/*A0-A7*/ "BMC_CPLD_FPGA_SEL","","","","","","","",
/*B0-B7*/ "","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
/*E0-E7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON",
"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
"CPU1_PROCHOT_LVT3_ BMC",
/*F0-F7*/ "IRQ_PVDDQ_ABC_VRHOT_LVT3","",
"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
/*G0-G7*/ "CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
/*H0-H7*/ "LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
"LED_POST_CODE_6","LED_POST_CODE_7",
/*I0-I7*/ "CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
/*M0-M7*/ "CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
"CPU0_THERMTRIP_LATCH_LVT3",
"CPU1_THERMTRIP_LATCH_LVT3","","",
/*N0-N7*/ "","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
"BMC_PWR_DEBUG","RST_RSMRST",
/*Q0-Q7*/ "","","","","UARTSW_LSB","UARTSW_MSB",
"POST_CARD_PRES_BMC","PE_BMC_WAKE",
/*R0-R7*/ "","","BMC_TCK_MUX_SEL","BMC_PRDY",
"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
"SLT_CFG1",
/*S0-S7*/ "THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
"","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","BMC_FAULT","","",
/*V0-V7*/ "","","","FAST_PROCHOT_EN","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","GLOBAL_RST_WARN",
"CPU0_MEMABC_MEMHOT_LVT3_BMC",
"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
/*Y0-Y7*/ "SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
"","","",
/*Z0-Z7*/ "","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
"","","","",
/*AA0-AA7*/ "CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
"","POST_COMPLETE",
/*AB0-AB7*/ "IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
};
&mac0 {
......@@ -368,6 +432,11 @@ &i2c3 {
&i2c4 {
status = "okay";
// BMC Debug Header
ipmb0@10 {
compatible = "ipmb-dev";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
i2c-protocol;
};
};
&i2c5 {
......@@ -449,6 +518,11 @@ tmp421@1f {
&i2c9 {
status = "okay";
//USB Debug Connector
ipmb0@10 {
compatible = "ipmb-dev";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
i2c-protocol;
};
};
&pwm_tacho {
......
// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright (c) 2018 Facebook Inc.
/dts-v1/;
#include "aspeed-g5.dtsi"
#include <dt-bindings/i2c/i2c.h>
/ {
model = "Facebook Yosemitev2 BMC";
compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
aliases {
serial4 = &uart5;
};
chosen {
stdout-path = &uart5;
};
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
iio-hwmon {
// VOLATAGE SENSOR
compatible = "iio-hwmon";
io-channels = <&adc 0> , <&adc 1> , <&adc 2> , <&adc 3> ,
<&adc 4> , <&adc 5> , <&adc 6> , <&adc 7> ,
<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
#include "openbmc-flash-layout.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "pnor";
};
};
&uart1 {
// Host1 Console
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default>;
};
&uart2 {
// Host2 Console
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd2_default
&pinctrl_rxd2_default>;
};
&uart3 {
// Host3 Console
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd3_default
&pinctrl_rxd3_default>;
};
&uart4 {
// Host4 Console
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd4_default
&pinctrl_rxd4_default>;
};
&uart5 {
// BMC Console
status = "okay";
};
&vuart {
// Virtual UART
status = "okay";
};
&mac0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
use-ncsi;
mlx,multi-host;
};
&adc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default
&pinctrl_adc1_default
&pinctrl_adc2_default
&pinctrl_adc3_default
&pinctrl_adc4_default
&pinctrl_adc5_default
&pinctrl_adc6_default
&pinctrl_adc7_default
&pinctrl_adc8_default
&pinctrl_adc9_default
&pinctrl_adc10_default
&pinctrl_adc11_default
&pinctrl_adc12_default
&pinctrl_adc13_default
&pinctrl_adc14_default
&pinctrl_adc15_default>;
};
&i2c1 {
//Host1 IPMB bus
status = "okay";
multi-master;
ipmb1@10 {
compatible = "ipmb-dev";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
i2c-protocol;
};
};
&i2c3 {
//Host2 IPMB bus
status = "okay";
multi-master;
ipmb3@10 {
compatible = "ipmb-dev";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
i2c-protocol;
};
};
&i2c5 {
//Host3 IPMB bus
status = "okay";
multi-master;
ipmb5@10 {
compatible = "ipmb-dev";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
i2c-protocol;
};
};
&i2c7 {
//Host4 IPMB bus
status = "okay";
multi-master;
ipmb7@10 {
compatible = "ipmb-dev";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
i2c-protocol;
};
};
&i2c8 {
status = "okay";
//FRU EEPROM
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
pagesize = <32>;
};
};
&i2c9 {
status = "okay";
tmp421@4e {
//INLET TEMP
compatible = "ti,tmp421";
reg = <0x4e>;
};
//OUTLET TEMP
tmp421@4f {
compatible = "ti,tmp421";
reg = <0x4f>;
};
};
&i2c10 {
status = "okay";
//HSC
adm1278@40 {
compatible = "adi,adm1278";
reg = <0x40>;
};
};
&i2c11 {
status = "okay";
//MEZZ_TEMP_SENSOR
tmp421@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
};
&i2c12 {
status = "okay";
//MEZZ_FRU
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
pagesize = <32>;
};
};
&pwm_tacho {
status = "okay";
//FSC
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
fan@0 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
};
fan@1 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
};
};
......@@ -4,6 +4,7 @@
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/leds/leds-pca955x.h>
/ {
model = "Rainier";
......@@ -32,6 +33,11 @@ flash_memory: region@B8000000 {
no-map;
reg = <0xB8000000 0x04000000>; /* 64M */
};
vga_memory: region@bf000000 {
no-map;
reg = <0xbf000000 0x01000000>; /* 16M */
};
};
gpio-keys {
......@@ -64,6 +70,40 @@ ps3-presence {
};
&gpio0 {
gpio-line-names =
/*A0-A7*/ "","","","","","","","",
/*B0-B7*/ "","","","","","","","",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","","","","","","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","","","","","","","",
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "","","","","","","","",
/*Q0-Q7*/ "cfam-reset","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
"","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","",
/*AA0-AA7*/ "","","","","","","","",
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
};
&emmc_controller {
status = "okay";
};
......@@ -72,6 +112,88 @@ &emmc {
status = "okay";
};
&fsim0 {
status = "okay";
#address-cells = <2>;
#size-cells = <0>;
cfam@0,0 {
reg = <0 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <0>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ0: occ {
compatible = "ibm,p9-occ";
};
};
fsi_hub0: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
no-scan-on-init;
};
};
};
&fsi_hub0 {
cfam@1,0 {
reg = <1 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <1>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ1: occ {
compatible = "ibm,p9-occ";
};
};
fsi_hub1: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
no-scan-on-init;
};
};
};
/* Legacy OCC numbering (to get rid of when userspace is fixed) */
&fsi_occ0 {
reg = <1>;
};
&fsi_occ1 {
reg = <2>;
};
&ibt {
status = "okay";
};
......@@ -269,66 +391,82 @@ pca0: pca9552@61 {
gpio@0 {
reg = <0>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@2 {
reg = <2>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@3 {
reg = <3>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@4 {
reg = <4>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@5 {
reg = <5>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@6 {
reg = <6>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@7 {
reg = <7>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@8 {
reg = <8>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@9 {
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@10 {
reg = <10>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@11 {
reg = <11>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@12 {
reg = <12>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@13 {
reg = <13>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@14 {
reg = <14>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@15 {
reg = <15>;
type = <PCA955X_TYPE_GPIO>;
};
};
......@@ -386,21 +524,6 @@ eeprom@51 {
&i2c9 {
status = "okay";
ir35221@42 {
compatible = "infineon,ir35221";
reg = <0x42>;
};
ir35221@43 {
compatible = "infineon,ir35221";
reg = <0x43>;
};
ir35221@44 {
compatible = "infineon,ir35221";
reg = <0x44>;
};
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
......@@ -411,21 +534,6 @@ tmp423b@4d {
reg = <0x4d>;
};
ir35221@72 {
compatible = "infineon,ir35221";
reg = <0x72>;
};
ir35221@73 {
compatible = "infineon,ir35221";
reg = <0x73>;
};
ir35221@74 {
compatible = "infineon,ir35221";
reg = <0x74>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
......@@ -435,21 +543,6 @@ eeprom@50 {
&i2c10 {
status = "okay";
ir35221@42 {
compatible = "infineon,ir35221";
reg = <0x42>;
};
ir35221@43 {
compatible = "infineon,ir35221";
reg = <0x43>;
};
ir35221@44 {
compatible = "infineon,ir35221";
reg = <0x44>;
};
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
......@@ -460,21 +553,6 @@ tmp423b@4d {
reg = <0x4d>;
};
ir35221@72 {
compatible = "infineon,ir35221";
reg = <0x72>;
};
ir35221@73 {
compatible = "infineon,ir35221";
reg = <0x73>;
};
ir35221@74 {
compatible = "infineon,ir35221";
reg = <0x74>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
......@@ -540,6 +618,10 @@ &vuart1 {
status = "okay";
};
&vuart2 {
status = "okay";
};
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
......
......@@ -8,6 +8,52 @@ / {
model = "Mihawk BMC";
compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
aliases {
i2c215 = &bus6_mux215;
i2c216 = &bus6_mux216;
i2c217 = &bus6_mux217;
i2c218 = &bus6_mux218;
i2c219 = &bus6_mux219;
i2c220 = &bus6_mux220;
i2c221 = &bus6_mux221;
i2c222 = &bus6_mux222;
i2c223 = &bus7_mux223;
i2c224 = &bus7_mux224;
i2c225 = &bus7_mux225;
i2c226 = &bus7_mux226;
i2c227 = &bus7_mux227;
i2c228 = &bus7_mux228;
i2c229 = &bus7_mux229;
i2c230 = &bus7_mux230;
i2c231 = &bus9_mux231;
i2c232 = &bus9_mux232;
i2c233 = &bus9_mux233;
i2c234 = &bus9_mux234;
i2c235 = &bus9_mux235;
i2c236 = &bus9_mux236;
i2c237 = &bus9_mux237;
i2c238 = &bus9_mux238;
i2c239 = &bus10_mux239;
i2c240 = &bus10_mux240;
i2c241 = &bus10_mux241;
i2c242 = &bus10_mux242;
i2c243 = &bus10_mux243;
i2c244 = &bus10_mux244;
i2c245 = &bus10_mux245;
i2c246 = &bus10_mux246;
i2c247 = &bus12_mux247;
i2c248 = &bus12_mux248;
i2c249 = &bus12_mux249;
i2c250 = &bus12_mux250;
i2c251 = &bus13_mux251;
i2c252 = &bus13_mux252;
i2c253 = &bus13_mux253;
i2c254 = &bus13_mux254;
i2c255 = &bus13_mux255;
i2c256 = &bus13_mux256;
i2c257 = &bus13_mux257;
i2c258 = &bus13_mux258;
};
chosen {
stdout-path = &uart5;
......@@ -120,35 +166,24 @@ fan5-presence {
leds {
compatible = "gpio-leds";
fault {
front-fault {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
};
power {
power-button {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
};
rear-id {
front-id {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
};
rear-g {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
};
rear-ok {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
};
fan0 {
retain-state-shutdown;
......@@ -630,6 +665,54 @@ pca9548@70 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
bus7_mux223: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
bus7_mux224: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
bus7_mux225: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
bus7_mux226: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
bus7_mux227: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
bus7_mux228: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
bus7_mux229: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
bus7_mux230: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
......@@ -644,6 +727,54 @@ pca9548@70 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
bus6_mux215: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
bus6_mux216: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
bus6_mux217: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
bus6_mux218: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
bus6_mux219: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
bus6_mux220: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
bus6_mux221: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
bus6_mux222: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
......@@ -684,6 +815,30 @@ pca9545riser@70 {
i2c-mux-idle-disconnect;
interrupt-controller;
#interrupt-cells = <2>;
bus9_mux231: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
bus9_mux232: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
bus9_mux233: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
bus9_mux234: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
pca9545@71 {
......@@ -695,6 +850,30 @@ pca9545@71 {
i2c-mux-idle-disconnect;
interrupt-controller;
#interrupt-cells = <2>;
bus9_mux235: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
bus9_mux236: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
bus9_mux237: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
bus9_mux238: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
......@@ -725,6 +904,30 @@ pca9545riser@70 {
i2c-mux-idle-disconnect;
interrupt-controller;
#interrupt-cells = <2>;
bus10_mux239: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
bus10_mux240: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
bus10_mux241: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
bus10_mux242: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
pca9545@71 {
......@@ -736,6 +939,30 @@ pca9545@71 {
i2c-mux-idle-disconnect;
interrupt-controller;
#interrupt-cells = <2>;
bus10_mux243: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
bus10_mux244: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
bus10_mux245: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
bus10_mux246: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
......@@ -796,7 +1023,7 @@ pca9545@70 {
interrupt-controller;
#interrupt-cells = <2>;
i2c@0 {
bus12_mux247: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
......@@ -807,7 +1034,7 @@ eeprom@50 {
};
};
i2c@1 {
bus12_mux248: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
......@@ -818,7 +1045,7 @@ eeprom@50 {
};
};
i2c@2 {
bus12_mux249: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
......@@ -829,7 +1056,7 @@ eeprom@50 {
};
};
i2c@3 {
bus12_mux250: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
......@@ -857,6 +1084,53 @@ pca9548@70 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
bus13_mux251: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
bus13_mux252: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
bus13_mux253: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
bus13_mux254: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
bus13_mux255: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
bus13_mux256: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
bus13_mux257: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
bus13_mux258: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
......
// SPDX-License-Identifier: GPL-2.0+
// Copyright 2019 YADRO
/dts-v1/;
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Nicole BMC";
compatible = "yadro,nicole-bmc", "aspeed,ast2500";
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
};
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
vga_memory: framebuffer@9f000000 {
no-map;
reg = <0x9f000000 0x01000000>; /* 16M */
};
flash_memory: region@98000000 {
no-map;
reg = <0x98000000 0x04000000>; /* 64M */
};
coldfire_memory: codefire_memory@9ef00000 {
reg = <0x9ef00000 0x00100000>;
no-map;
};
gfx_memory: framebuffer {
size = <0x01000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
video_engine_memory: jpegbuffer {
size = <0x02000000>; /* 32M */
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
};
leds {
compatible = "gpio-leds";
power {
label = "platform:green:power";
gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
};
identify {
label = "platform:blue:indicator";
gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
};
fault {
label = "platform:red:fault";
gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
};
attention {
label = "platform:yellow:alarm";
gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
};
};
fsi: gpio-fsi {
compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
memory-region = <&coldfire_memory>;
aspeed,sram = <&sram>;
aspeed,cvic = <&cvic>;
clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
};
gpio-keys {
compatible = "gpio-keys";
checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
};
iio-hwmon-battery {
compatible = "iio-hwmon";
io-channels = <&adc 12>;
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "pnor";
spi-max-frequency = <100000000>;
};
};
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
flash = <&spi1>;
};
&uart1 {
/* Rear RS-232 connector */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default
&pinctrl_nrts1_default
&pinctrl_ndtr1_default
&pinctrl_ndsr1_default
&pinctrl_ncts1_default
&pinctrl_ndcd1_default
&pinctrl_nri1_default>;
};
&uart5 {
status = "okay";
};
&mac0 {
status = "okay";
use-ncsi;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
<&syscon ASPEED_CLK_MAC1RCLK>;
clock-names = "MACCLK", "RCLK";
};
&i2c0 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c256";
reg = <0x50>;
pagesize = <64>;
};
};
&i2c2 {
status = "okay";
/* CPU0 characterization connector */
};
&i2c3 {
status = "okay";
/* CLK GEN SI5338 */
};
&i2c4 {
status = "okay";
/* Voltage regulators for CPU0 */
};
&i2c5 {
status = "okay";
/* Voltage regulators for CPU1 */
};
&i2c6 {
status = "okay";
rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
};
&i2c7 {
status = "okay";
/* CPLD */
};
&gpio {
gpio-line-names =
/*A0-A7*/ "","cfam-reset","","","","","fsi-mux","",
/*B0-B7*/ "","","","","","","","",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "fsi-enable","bmc_power_up","sys_pwrok_buf",
"func_mode0","func_mode1","func_mode2","","",
/*E0-E7*/ "","ncsi_cfg","","","","","","",
/*F0-F7*/ "","","","","","","","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","","","","","","","",
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","checkstop","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","power-button","","","","","",
/*P0-P7*/ "","fsi-trans","pm_rtc_adc_en","","","","","",
/*Q0-Q7*/ "","","","","","","","id-button",
/*R0-R7*/ "","software_pwrgood","","","","","","",
/*S0-S7*/ "","","","","","","","seq_cont",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","",
/*AA0-AA7*/ "fsi-clock","led-attention","fsi-data","led-fault",
"led-power","","","led-identify",
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
func_mode0 {
gpio-hog;
gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
output-low;
};
func_mode1 {
gpio-hog;
gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
output-low;
};
func_mode2 {
gpio-hog;
gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
output-low;
};
seq_cont {
gpio-hog;
gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
output-low;
};
ncsi_cfg {
gpio-hog;
input;
gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
};
};
&vuart {
status = "okay";
};
&gfx {
status = "okay";
memory-region = <&gfx_memory>;
};
&pinctrl {
aspeed,external-nodes = <&gfx &lhc>;
};
&ibt {
status = "okay";
};
&vhub {
status = "okay";
};
&adc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default
&pinctrl_adc1_default
&pinctrl_adc2_default
&pinctrl_adc3_default
&pinctrl_adc4_default
&pinctrl_adc5_default
&pinctrl_adc6_default
&pinctrl_adc7_default
&pinctrl_adc8_default
&pinctrl_adc9_default
&pinctrl_adc10_default
&pinctrl_adc11_default
&pinctrl_adc12_default
&pinctrl_adc13_default
&pinctrl_adc14_default
&pinctrl_adc15_default>;
};
&video {
status = "okay";
memory-region = <&video_engine_memory>;
};
#include "ibm-power9-dual.dtsi"
......@@ -231,23 +231,52 @@ w83773g@4c {
};
&gpio {
gpio-line-names =
/*A0-A7*/ "","cfam-reset","","","","","fsi-mux","",
/*B0-B7*/ "","","","","","","","",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","","","","","","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","","","","","","","",
/*I0-I7*/ "","","","power-button","","","","",
/*J0-J7*/ "","","checkstop","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","led-fault","",
"led-identify","","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "","","","","","","","",
/*Q0-Q7*/ "","","","","","","","id-button",
/*R0-R7*/ "","","fsi-trans","","","led-power","","",
/*S0-S7*/ "","","","","","","","seq_cont",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","",
/*AA0-AA7*/ "fsi-clock","","fsi-data","","","","","",
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
nic_func_mode0 {
gpio-hog;
gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "nic_func_mode0";
};
nic_func_mode1 {
gpio-hog;
gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "nic_func_mode1";
};
seq_cont {
gpio-hog;
gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "seq_cont";
};
};
......
......@@ -31,6 +31,59 @@ flash_memory: region@ba000000 {
};
};
gpio-keys {
compatible = "gpio-keys";
checkstop {
label = "checkstop";
gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 3)>;
};
ps0-presence {
label = "ps0-presence";
gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 3)>;
};
ps1-presence {
label = "ps1-presence";
gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 5)>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <1000>;
fan0-presence {
label = "fan0-presence";
gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
fan1-presence {
label = "fan1-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
fan2-presence {
label = "fan2-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
fan3-presence {
label = "fan3-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
};
gpio-keys {
compatible = "gpio-keys";
......@@ -89,6 +142,49 @@ fan3-presence {
linux,code = <7>;
};
};
iio-hwmon-dps310 {
compatible = "iio-hwmon";
io-channels = <&dps 0>;
};
iio-hwmon-bmp280 {
compatible = "iio-hwmon";
io-channels = <&bmp 1>;
};
};
&gpio0 {
gpio-line-names =
/*A0-A7*/ "","","","","","","","",
/*B0-B7*/ "fsi-mux","","","","","","","",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "power-button","","","checkstop","","presence-ps1","","led-rear-fault",
/*F0-F7*/ "","","","","","","","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","","","presence-ps0","","","","",
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "led-rear-power","led-rear-id","","","","","","",
/*P0-P7*/ "","","","","","","","",
/*Q0-Q7*/ "cfam-reset","","","","","","","fsi-routing",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","",
/*AA0-AA7*/ "","","","","","","","",
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
};
&fmc {
......@@ -132,6 +228,10 @@ &mac2 {
use-ncsi;
};
&emmc_controller {
status = "okay";
};
&emmc {
status = "okay";
};
......@@ -142,6 +242,9 @@ &fsim0 {
#address-cells = <2>;
#size-cells = <0>;
fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
cfam@0,0 {
reg = <0 0>;
#address-cells = <1>;
......@@ -394,6 +497,11 @@ &i2c0 {
&i2c1 {
status = "okay";
tpm: tpm@2e {
compatible = "tcg,tpm-tis-i2c";
reg = <0x2e>;
};
};
&i2c2 {
......@@ -774,6 +882,10 @@ &vuart1 {
status = "okay";
};
&vuart2 {
status = "okay";
};
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
......
......@@ -191,6 +191,40 @@ iio-hwmon-bmp280 {
};
&gpio {
gpio-line-names =
/*A0-A7*/ "","cfam-reset","","","","","fsi-mux","",
/*B0-B7*/ "","","","","","air-water","","",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "fsi-enable","","","","","","","",
/*E0-E7*/ "fsi-data","","","","","","","",
/*F0-F7*/ "","","","","","","","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","","","","","","","",
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","checkstop","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "presence-ps1","","led-rear-fault","led-rear-power",
"led-rear-id","","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "","","","","","","","presence-ps0",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","fsi-trans","","","power-button","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","",
/*AA0-AA7*/ "fsi-clock","","","","","","","",
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
};
&fmc {
status = "okay";
......
......@@ -478,32 +478,61 @@ &gpio {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpioh_unbiased>;
gpio-line-names =
/*A0-A7*/ "","cfam-reset","","","","","","",
/*B0-B7*/ "","","","","","","","",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "fsi-enable","","","","","led-sys-boot-status","led-attention",
"led-fault",
/*E0-E7*/ "","","","","","","","presence-pcie-e2b",
/*F0-F7*/ "","","","","","","","checkstop",
/*G0-G7*/ "fsi-clock","fsi-data","","","","","","",
/*H0-H7*/ "onewire0","onewire1","onewire2","onewire3","","","","",
/*I0-I7*/ "","","","power-button","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","","iso_u164_en","","fsi-trans","",
/*P0-P7*/ "ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
"","fsi-mux","",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","",
/*AA0-AA7*/ "","","led-hdd-fault","","","","","",
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
line_iso_u146_en {
gpio-hog;
gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "iso_u164_en";
};
ncsi_mux_en_n {
gpio-hog;
gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "ncsi_mux_en_n";
};
line_bmc_i2c2_sw_rst_n {
gpio-hog;
gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "bmc_i2c2_sw_rst_n";
};
line_bmc_i2c5_sw_rst_n {
gpio-hog;
gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "bmc_i2c5_sw_rst_n";
};
};
......
......@@ -219,6 +219,16 @@ sram: sram@1e720000 {
reg = <0x1e720000 0x8000>; // 32K
};
video: video@1e700000 {
compatible = "aspeed,ast2400-video-engine";
reg = <0x1e700000 0x1000>;
clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
<&syscon ASPEED_CLK_GATE_ECLK>;
clock-names = "vclk", "eclk";
interrupts = <7>;
status = "disabled";
};
sdmmc: sd-controller@1e740000 {
compatible = "aspeed,ast2400-sd-controller";
reg = <0x1e740000 0x100>;
......
......@@ -224,6 +224,14 @@ syscon: syscon@1e6e2000 {
#clock-cells = <1>;
#reset-cells = <1>;
scu_ic: interrupt-controller@18 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2500-scu-ic";
reg = <0x18 0x4>;
interrupts = <21>;
interrupt-controller;
};
p2a: p2a-control@2c {
compatible = "aspeed,ast2500-p2a-ctrl";
reg = <0x2c 0x4>;
......@@ -254,6 +262,17 @@ gfx: display@1e6e6000 {
interrupts = <0x19>;
};
xdma: xdma@1e6e7000 {
compatible = "aspeed,ast2500-xdma";
reg = <0x1e6e7000 0x100>;
clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
resets = <&syscon ASPEED_RESET_XDMA>;
interrupts-extended = <&vic 6>, <&scu_ic 2>;
pcie-device = "bmc";
aspeed,scu = <&syscon>;
status = "disabled";
};
adc: adc@1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
......@@ -426,22 +445,22 @@ lpc_bmc: lpc-bmc@0 {
#size-cells = <1>;
ranges = <0x0 0x0 0x80>;
kcs1: kcs1@0 {
compatible = "aspeed,ast2500-kcs-bmc";
kcs1: kcs@24 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
interrupts = <8>;
kcs_chan = <1>;
status = "disabled";
};
kcs2: kcs2@0 {
compatible = "aspeed,ast2500-kcs-bmc";
kcs2: kcs@28 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
interrupts = <8>;
kcs_chan = <2>;
status = "disabled";
};
kcs3: kcs3@0 {
compatible = "aspeed,ast2500-kcs-bmc";
kcs3: kcs@2c {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
interrupts = <8>;
kcs_chan = <3>;
status = "disabled";
};
};
......@@ -455,10 +474,10 @@ lpc_host: lpc-host@80 {
#size-cells = <1>;
ranges = <0x0 0x80 0x1e0>;
kcs4: kcs4@0 {
compatible = "aspeed,ast2500-kcs-bmc";
kcs4: kcs@94 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
interrupts = <8>;
kcs_chan = <4>;
status = "disabled";
};
......
......@@ -65,6 +65,7 @@ timer {
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
clocks = <&syscon ASPEED_CLK_HPLL>;
arm,cpu-registers-not-fw-configured;
always-on;
};
ahb {
......@@ -313,6 +314,22 @@ smp-memram@180 {
compatible = "aspeed,ast2600-smpmem";
reg = <0x180 0x40>;
};
scu_ic0: interrupt-controller@560 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2600-scu-ic0";
reg = <0x560 0x4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
};
scu_ic1: interrupt-controller@570 {
#interrupt-cells = <1>;
compatible = "aspeed,ast2600-scu-ic1";
reg = <0x570 0x4>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
};
};
rng: hwrng@1e6e2524 {
......@@ -322,6 +339,29 @@ rng: hwrng@1e6e2524 {
quality = <100>;
};
xdma: xdma@1e6e7000 {
compatible = "aspeed,ast2600-xdma";
reg = <0x1e6e7000 0x100>;
clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
reset-names = "device", "root-complex";
interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<&scu_ic0 2>;
pcie-device = "bmc";
aspeed,scu = <&syscon>;
status = "disabled";
};
video: video@1e700000 {
compatible = "aspeed,ast2600-video-engine";
reg = <0x1e700000 0x1000>;
clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
<&syscon ASPEED_CLK_GATE_ECLK>;
clock-names = "vclk", "eclk";
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
gpio0: gpio@1e780000 {
#gpio-cells = <2>;
gpio-controller;
......@@ -368,6 +408,7 @@ timer: timer@1e782000 {
<&gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_APB1>;
clock-names = "PCLK";
status = "disabled";
};
uart1: serial@1e783000 {
......@@ -433,22 +474,23 @@ lpc_bmc: lpc-bmc@0 {
#size-cells = <1>;
ranges = <0x0 0x0 0x80>;
kcs1: kcs1@0 {
compatible = "aspeed,ast2600-kcs-bmc";
kcs1: kcs@24 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
kcs_chan = <1>;
status = "disabled";
};
kcs2: kcs2@0 {
compatible = "aspeed,ast2600-kcs-bmc";
kcs2: kcs@28 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
kcs_chan = <2>;
status = "disabled";
};
kcs3: kcs3@0 {
compatible = "aspeed,ast2600-kcs-bmc";
kcs3: kcs@2c {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
kcs_chan = <3>;
status = "disabled";
};
};
......@@ -462,10 +504,10 @@ lpc_host: lpc-host@80 {
#size-cells = <1>;
ranges = <0x0 0x80 0x1e0>;
kcs4: kcs4@0 {
compatible = "aspeed,ast2600-kcs-bmc";
kcs4: kcs@94 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
kcs_chan = <4>;
status = "disabled";
};
......
......@@ -62,7 +62,7 @@ &i2c0 {
wm8904: wm8904@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
clocks = <&pck2>;
clocks = <&pmc PMC_TYPE_SYSTEM 10>;
clock-names = "mclk";
};
};
......
......@@ -283,7 +283,7 @@ uart5: serial@200 {
&flx3 {
status = "okay";
uart6: serial@200 {
uart8: serial@200 {
status = "okay";
};
};
......@@ -291,7 +291,7 @@ uart6: serial@200 {
&flx4 {
status = "okay";
i2c2: i2c@600 {
i2c6: i2c@600 {
status = "okay";
};
};
......
......@@ -28,7 +28,7 @@ aliases {
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
serial6 = &uart6;
serial6 = &uart8;
};
chosen {
......@@ -207,7 +207,7 @@ pinctrl_flx3_default: flx3_usart_default {
};
};
pinctrl_flx4_default: flx4_i2c2_default {
pinctrl_flx4_default: flx4_i2c6_default {
pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
<PIN_PD13__FLEXCOM4_IO1>; //CLK
bias-disable;
......@@ -299,21 +299,8 @@ &flx0 {
status = "disabled";
uart5: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x400>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(11))>,
<&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(12))>;
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
atmel,fifo-size = <32>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
......@@ -324,22 +311,9 @@ &flx3 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "disabled";
uart6: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x400>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(17))>,
<&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(18))>;
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usart";
uart8: serial@200 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
atmel,fifo-size = <32>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
......@@ -350,23 +324,9 @@ &flx4 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "disabled";
i2c2: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(19))>,
<&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(20))>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
i2c6: i2c@600 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
status = "disabled";
};
};
......
......@@ -542,6 +542,18 @@ AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_H
};
};
sdmmc1 {
pinctrl_sdmmc1_default: sdmmc1 {
atmel,pins =
<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */
AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */
AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */
AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */
AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */
AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */
};
};
gpio_keys {
pinctrl_key_gpio_default: pinctrl_key_gpio {
atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
......@@ -568,6 +580,15 @@ &sdmmc0 {
disable-wp;
};
&sdmmc1 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
no-1-8-v;
non-removable;
status = "disabled"; /* Conflict with flx4. */
};
&qspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi>;
......@@ -579,6 +600,8 @@ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
m25p,fast-read;
at91bootstrap@0 {
......
......@@ -13,6 +13,10 @@ / {
model = "Atmel SAMA5D27 SoM1";
compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
aliases {
i2c0 = &i2c0;
};
clocks {
slow_xtal {
clock-frequency = <32768>;
......@@ -34,12 +38,44 @@ qspi1: spi@f0024000 {
pinctrl-0 = <&pinctrl_qspi1_default>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
m25p,fast-read;
at91bootstrap@00000000 {
label = "at91bootstrap";
reg = <0x00000000 0x00040000>;
};
bootloader@00040000 {
label = "bootloader";
reg = <0x00040000 0x000c0000>;
};
bootloaderenvred@00100000 {
label = "bootloader env redundant";
reg = <0x00100000 0x00040000>;
};
bootloaderenv@00140000 {
label = "bootloader env";
reg = <0x00140000 0x00040000>;
};
dtb@00180000 {
label = "device tree";
reg = <0x00180000 0x00080000>;
};
kernel@00200000 {
label = "kernel";
reg = <0x00200000 0x00600000>;
};
};
};
......@@ -57,7 +93,25 @@ ethernet-phy@0 {
};
};
i2c0: i2c@f8028000 {
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_default>;
status = "okay";
at24@50 {
compatible = "24c02";
reg = <0x50>;
pagesize = <8>;
};
};
pinctrl@fc038000 {
pinctrl_i2c0_default: i2c0_default {
pinmux = <PIN_PD21__TWD0>,
<PIN_PD22__TWCK0>;
bias-disable;
};
pinctrl_qspi1_default: qspi1_default {
sck_cs {
......
......@@ -21,7 +21,7 @@ aliases {
serial1 = &uart4; /* mikro BUS 1 */
serial2 = &uart2; /* mikro BUS 2 */
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c2 = &i2c3;
};
chosen {
......@@ -125,21 +125,13 @@ flx1: flexcom@f8038000 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
i2c2: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
i2c3: i2c@600 {
dmas = <0>, <0>;
dma-names = "tx", "rx";
i2c-analog-filter;
i2c-digital-filter;
i2c-digital-filter-width-ns = <35>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
atmel,fifo-size = <16>;
status = "okay";
};
};
......@@ -178,27 +170,17 @@ flx3: flexcom@fc014000 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
status = "disabled";
uart7: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usart";
uart8: serial@200 {
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
atmel,fifo-size = <32>;
status = "disabled"; /* Conflict with isc. */
};
spi2: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "spi_clk";
spi5: spi@400 {
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
atmel,fifo-size = <16>;
status = "disabled"; /* Conflict with isc. */
};
};
......@@ -207,43 +189,25 @@ flx4: flexcom@fc018000 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
status = "okay";
uart6: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "usart";
uart9: serial@200 {
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <32>;
status = "disabled"; /* Conflict with spi3 and i2c3. */
status = "disabled"; /* Conflict with spi6 and i2c6. */
};
spi3: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "spi_clk";
spi6: spi@400 {
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
atmel,fifo-size = <16>;
status = "okay"; /* Conflict with uart6 and i2c3. */
status = "okay"; /* Conflict with uart5 and i2c6. */
};
i2c3: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
i2c6: i2c@600 {
dmas = <0>, <0>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
status = "disabled"; /* Conflict with uart6 and spi3. */
status = "disabled"; /* Conflict with uart5 and spi6. */
};
};
......
......@@ -17,6 +17,10 @@ / {
model = "Microchip SAMA5D27 WLSOM1";
compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
aliases {
i2c0 = &i2c0;
};
clocks {
slow_xtal {
clock-frequency = <32768>;
......@@ -32,18 +36,6 @@ &flx1 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
uart6: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(13))>,
<&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(14))>;
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
clock-names = "usart";
pinctrl-0 = <&pinctrl_flx1_default>;
pinctrl-names = "default";
};
......
......@@ -77,18 +77,6 @@ &flx0 {
status = "okay";
uart5: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(11))>,
<&dma0
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(12))>;
dma-names = "tx", "rx";
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
clock-names = "usart";
pinctrl-0 = <&pinctrl_flx0_default>;
pinctrl-names = "default";
atmel,use-dma-rx;
......
This diff is collapsed.
......@@ -18,9 +18,9 @@ / {
compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
aliases {
serial0 = &uart0;
i2c0 = &i2c0;
i2c1 = &i2c1;
serial0 = &uart0; /* DBGU */
i2c0 = &i2c0; /* mikroBUS 1 */
i2c1 = &i2c1; /* XPRO EXT1 */
i2c2 = &i2c2;
};
......@@ -40,7 +40,7 @@ main_xtal {
ahb {
usb0: gadget@300000 {
atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
......@@ -125,8 +125,6 @@ sdmmc0: sdio-host@a0000000 {
bus-width = <8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
non-removable;
mmc-ddr-1_8v;
status = "okay";
};
......@@ -184,7 +182,7 @@ i2c0: i2c@f8028000 {
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
......@@ -193,20 +191,12 @@ flx0: flexcom@f8034000 {
status = "okay";
i2c2: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <0>, <0>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_flx0_default>;
pinctrl-1 = <&pinctrl_flx0_gpio>;
sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>;
atmel,fifo-size = <16>;
scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
};
......@@ -236,7 +226,7 @@ i2c1: i2c@fc028000 {
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
at24@50 {
......@@ -414,6 +404,7 @@ bp1 {
label = "PB_USER";
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
wakeup-source;
};
};
......
......@@ -16,6 +16,13 @@ / {
model = "Atmel SAMA5D2 Xplained";
compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
aliases {
serial0 = &uart1; /* DBGU */
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2; /* XPRO EXT2 */
};
chosen {
stdout-path = "serial0:115200n8";
};
......@@ -72,6 +79,58 @@ sdmmc1: sdio-host@b0000000 {
};
apb {
qspi0: spi@f0020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi0_default>;
status = "disabled"; /* conflict with sdmmc1 */
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
m25p,fast-read;
at91bootstrap@00000000 {
label = "at91bootstrap";
reg = <0x00000000 0x00040000>;
};
bootloader@00040000 {
label = "bootloader";
reg = <0x00040000 0x000c0000>;
};
bootloaderenvred@00100000 {
label = "bootloader env redundant";
reg = <0x00100000 0x00040000>;
};
bootloaderenv@00140000 {
label = "bootloader env";
reg = <0x00140000 0x00040000>;
};
dtb@00180000 {
label = "device tree";
reg = <0x00180000 0x00080000>;
};
kernel@00200000 {
label = "kernel";
reg = <0x00200000 0x00600000>;
};
misc@00800000 {
label = "misc";
reg = <0x00800000 0x00000000>;
};
};
};
spi0: spi@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_default>;
......@@ -133,7 +192,7 @@ i2c0: i2c@f8028000 {
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-sda-hold-time-ns = <350>;
status = "okay";
......@@ -275,16 +334,25 @@ flx0: flexcom@f8034000 {
status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
uart5: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
clock-names = "usart";
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
atmel,fifo-size = <32>;
status = "okay";
};
i2c2: i2c@600 {
dmas = <0>, <0>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_flx0_default>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-sda-hold-time-ns = <350>;
i2c-analog-filter;
i2c-digital-filter;
i2c-digital-filter-width-ns = <35>;
status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
};
};
shdwc@f8048010 {
......@@ -325,21 +393,13 @@ flx4: flexcom@fc018000 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
i2c2: i2c@600 {
compatible = "atmel,sama5d2-i2c";
reg = <0x600 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
i2c6: i2c@600 {
dmas = <0>, <0>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_flx4_default>;
pinctrl-1 = <&pinctrl_flx4_gpio>;
sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
atmel,fifo-size = <16>;
scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-analog-filter;
i2c-digital-filter;
i2c-digital-filter-width-ns = <35>;
......@@ -356,7 +416,7 @@ i2c1: i2c@fc028000 {
i2c-digital-filter-width-ns = <35>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>;
scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
at24@54 {
......@@ -480,6 +540,12 @@ pinctrl_i2c1_gpio: i2c1_gpio {
bias-disable;
};
pinctrl_i2c2_gpio: i2c2_gpio {
pinmux = <PIN_PB28__GPIO>,
<PIN_PB29__GPIO>;
bias-disable;
};
pinctrl_i2s0_default: i2s0_default {
pinmux = <PIN_PC1__I2SC0_CK>,
<PIN_PC2__I2SC0_MCK>,
......@@ -535,6 +601,22 @@ pinctrl_pdmic_default: pdmic_default {
bias-disable;
};
pinctrl_qspi0_default: qspi0_default {
sck_cs {
pinmux = <PIN_PA22__QSPI0_SCK>,
<PIN_PA23__QSPI0_CS>;
bias-disable;
};
data {
pinmux = <PIN_PA24__QSPI0_IO0>,
<PIN_PA25__QSPI0_IO1>,
<PIN_PA26__QSPI0_IO2>,
<PIN_PA27__QSPI0_IO3>;
bias-pull-up;
};
};
pinctrl_sdmmc0_default: sdmmc0_default {
cmd_data {
pinmux = <PIN_PA1__SDMMC0_CMD>,
......
......@@ -46,10 +46,6 @@ &clk32k {
atmel,osc-bypass;
};
&usart1_clk {
atmel,clk-output-range = <0 132000000>;
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
......
This diff is collapsed.
This diff is collapsed.
......@@ -72,9 +72,9 @@ ov2640: camera@30 {
pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
clocks = <&pck1>;
clocks = <&pmc PMC_TYPE_SYSTEM 9>;
clock-names = "xvclk";
assigned-clocks = <&pck1>;
assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
assigned-clock-rates = <25000000>;
port {
......
This diff is collapsed.
......@@ -59,7 +59,7 @@ i2c0: i2c@f8010000 {
wm8904: codec@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
clocks = <&pck0>;
clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "mclk";
};
......
......@@ -56,6 +56,16 @@ sd_io_1v8_reg: sd_io_1v8_reg {
3300000 0x0>;
status = "okay";
};
sd_vcc_reg: sd_vcc_reg {
compatible = "regulator-fixed";
regulator-name = "vcc-sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
};
};
&firmware {
......@@ -69,7 +79,7 @@ expgpio: gpio {
"GLOBAL_RESET",
"VDD_SD_IO_SEL",
"CAM_GPIO",
"",
"SD_PWR_ON",
"";
status = "okay";
};
......@@ -174,6 +184,7 @@ brcmf: wifi@1 {
/* EMMC2 is used to drive the SD card */
&emmc2 {
vqmmc-supply = <&sd_io_1v8_reg>;
vmmc-supply = <&sd_vcc_reg>;
broken-cd;
status = "okay";
};
......
......@@ -130,7 +130,6 @@ v3d: v3d@7ec00000 {
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
interrupts = <1 10>;
power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
};
vc4: gpu {
......
// SPDX-License-Identifier: GPL-2.0
/*
* This include file covers the common peripherals and configuration between
* bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
* firmware interface.
*/
#include <dt-bindings/power/raspberrypi-power.h>
&v3d {
power-domains = <&power RPI_POWER_DOMAIN_V3D>;
};
// SPDX-License-Identifier: GPL-2.0
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
#include "bcm2835-rpi-common.dtsi"
/ {
compatible = "brcm,bcm2835";
......
// SPDX-License-Identifier: GPL-2.0
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
#include "bcm2835-rpi-common.dtsi"
/ {
compatible = "brcm,bcm2836";
......
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
#include "bcm2835-rpi-common.dtsi"
/ {
compatible = "brcm,bcm2837";
......
......@@ -77,7 +77,7 @@ soc@f7000000 {
ranges = <0 0xf7000000 0x1000000>;
sdhci0: sdhci@ab0000 {
sdhci0: mmc@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
......@@ -86,7 +86,7 @@ sdhci0: sdhci@ab0000 {
status = "disabled";
};
sdhci1: sdhci@ab0800 {
sdhci1: mmc@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
......@@ -95,7 +95,7 @@ sdhci1: sdhci@ab0800 {
status = "disabled";
};
sdhci2: sdhci@ab1000 {
sdhci2: mmc@ab1000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
......
......@@ -62,7 +62,7 @@ soc@f7000000 {
ranges = <0 0xf7000000 0x1000000>;
sdhci0: sdhci@ab0000 {
sdhci0: mmc@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
......
......@@ -122,7 +122,7 @@ soc@f7000000 {
ranges = <0 0xf7000000 0x1000000>;
interrupt-parent = <&gic>;
sdhci0: sdhci@ab0000 {
sdhci0: mmc@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
......@@ -131,7 +131,7 @@ sdhci0: sdhci@ab0000 {
status = "disabled";
};
sdhci1: sdhci@ab0800 {
sdhci1: mmc@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
......@@ -140,7 +140,7 @@ sdhci1: sdhci@ab0800 {
status = "disabled";
};
sdhci2: sdhci@ab1000 {
sdhci2: mmc@ab1000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
......
......@@ -175,7 +175,6 @@ i2c: i2c@11000 {
#size-cells = <0>;
interrupts = <11>;
clock-frequency = <400000>;
timeout-ms = <1000>;
clocks = <&core_clk 0>;
status = "okay";
};
......@@ -248,7 +247,7 @@ bridge_intc: bridge-interrupt-ctrl@20110 {
marvell,#interrupts = <5>;
};
intc: main-interrupt-ctrl@20200 {
intc: interrupt-controller@20200 {
compatible = "marvell,orion-intc";
interrupt-controller;
#interrupt-cells = <1>;
......
......@@ -3,6 +3,7 @@
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
*/
#include "dra74-ipu-dsp-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/ti-dra7-atl.h>
#include <dt-bindings/input/input.h>
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -10,6 +10,12 @@
/ {
compatible = "ti,dra722", "ti,dra72", "ti,dra7";
aliases {
rproc0 = &ipu1;
rproc1 = &ipu2;
rproc2 = &dsp1;
};
pmu {
compatible = "arm,cortex-a15-pmu";
interrupt-parent = <&wakeupgen>;
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -117,6 +117,8 @@ &i2c3 {
ricoh619: pmic@32 {
compatible = "ricoh,rc5t619";
reg = <0x32>;
interrupt-parent = <&gpio5>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
system-power-controller;
regulators {
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -673,7 +673,7 @@ regulator-state-mem {
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-name = "PVDD_ARM_1V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment