usb: dwc2: gadget: Fixes for StsPhseRcvd interrupt

The StsPhseRcvd interrupt should not be enabled in slave mode.

Also move the StsPhsRcvd interrupt checking in the endpoint interrupt
handler to the correct order according to the databook. The interrupt
itself will be implemented in a later commit.
Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/dwc2/gadget.c

@@ -2552,9 +2552,6 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
 	if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD)))
 		ints &= ~DXEPINT_XFERCOMPL;
 
-	if (ints & DXEPINT_STSPHSERCVD)
-		dev_dbg(hsotg->dev, "%s: StsPhseRcvd asserted\n", __func__);
-
 	if (ints & DXEPINT_XFERCOMPL) {
 		dev_dbg(hsotg->dev,
 			"%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n",
@@ -2617,6 +2614,9 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
 		}
 	}
 
+	if (ints & DXEPINT_STSPHSERCVD)
+		dev_dbg(hsotg->dev, "%s: StsPhseRcvd\n", __func__);
+
 	if (ints & DXEPINT_BACK2BACKSETUP)
 		dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
 
@@ -2905,11 +2905,12 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
 
 	/*
 	 * don't need XferCompl, we get that from RXFIFO in slave mode. In
-	 * DMA mode we may need this.
+	 * DMA mode we may need this and StsPhseRcvd.
 	 */
-	dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK) : 0) |
+	dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
+		DOEPMSK_STSPHSERCVDMSK) : 0) |
 		DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK |
-		DOEPMSK_SETUPMSK | DOEPMSK_STSPHSERCVDMSK,
+		DOEPMSK_SETUPMSK,
 		hsotg->regs + DOEPMSK);
 
 	dwc2_writel(0, hsotg->regs + DAINTMSK);