Commit 9eb3a8d0 authored by Marcelo Tosatti's avatar Marcelo Tosatti Committed by Linus Torvalds

[PATCH] cyclades async driver update

This patch is the first of several planned fixes for the cyclades
multiserial cards driver.

Its mostly a sync with in-house driver:

- Prevent users from opening non-existing Z ports
- Implement special XON/XOFF character handling in Z cards
- Prevent data-loss on Z cards
- Throttling fix for Z card
- Only throttle if CTS/RTS are set
- Fix accounting of received data

Kudos to Cyclades R&D
parent b9fe1f45
......@@ -2,7 +2,7 @@
#define Z_WAKE
#undef Z_EXT_CHARS_IN_BUFFER
static char rcsid[] =
"$Revision: 2.3.2.8 $$Date: 2000/07/06 18:14:16 $";
"$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $";
/*
* linux/drivers/char/cyclades.c
......@@ -12,7 +12,7 @@ static char rcsid[] =
*
* Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
* Modified and maintained by Marcio Saito <marcio@cyclades.com>.
* Currently maintained by Henrique Gobbi <henrique.gobbi@cyclades.com>.
* Currently maintained by Cyclades team <async@cyclades.com>.
*
* For Technical support and installation problems, please send e-mail
* to support@cyclades.com.
......@@ -25,6 +25,8 @@ static char rcsid[] =
* This version supports shared IRQ's (only for PCI boards).
*
* $Log: cyclades.c,v $
* Prevent users from opening non-existing Z ports.
*
* Revision 2.3.2.8 2000/07/06 18:14:16 ivan
* Fixed the PCI detection function to work properly on Alpha systems.
* Implemented support for TIOCSERGETLSR ioctl.
......@@ -676,6 +678,9 @@ static char rcsid[] =
#define cy_put_user put_user
static void cy_throttle (struct tty_struct *tty);
static void cy_send_xchar (struct tty_struct *tty, char ch);
static unsigned long
cy_get_user(unsigned long *addr)
{
......@@ -1256,8 +1261,6 @@ cyy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
info->mon.char_max = char_count;
info->mon.char_last = char_count;
#endif
info->idle_stats.recv_bytes += char_count;
info->idle_stats.recv_idle = jiffies;
while(char_count--){
if (tty->flip.count >= TTY_FLIPBUF_SIZE){
break;
......@@ -1266,11 +1269,13 @@ cyy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
data = cy_readb(base_addr+(CyRDSR<<index));
*tty->flip.flag_buf_ptr++ = TTY_NORMAL;
*tty->flip.char_buf_ptr++ = data;
info->idle_stats.recv_bytes++;
info->icount.rx++;
#ifdef CY_16Y_HACK
udelay(10L);
#endif
}
info->idle_stats.recv_idle = jiffies;
}
schedule_delayed_work(&tty->flip.work, 1);
}
......@@ -1627,9 +1632,12 @@ cyz_handle_rx(struct cyclades_port *info, volatile struct CH_CTRL *ch_ctrl,
}
#else
while(char_count--){
if (tty->flip.count >= TTY_FLIPBUF_SIZE){
if (tty->flip.count >= N_TTY_BUF_SIZE - tty->read_cnt)
break;
}
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
break;
data = cy_readb(cinfo->base_addr + rx_bufaddr + new_rx_get);
new_rx_get = (new_rx_get + 1) & (rx_bufsize - 1);
tty->flip.count++;
......@@ -1768,10 +1776,6 @@ cyz_handle_cmd(struct cyclades_card *cinfo)
fw_ver = cy_readl(&board_ctrl->fw_version);
hw_ver = cy_readl(&((struct RUNTIME_9060 *)(cinfo->ctl_addr))->mail_box_0);
#ifdef CONFIG_CYZ_INTR
if (!cinfo->nports)
cinfo->nports = (int) cy_readl(&board_ctrl->n_channel);
#endif
while(cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
special_count = 0;
......@@ -1958,6 +1962,7 @@ cyz_poll(unsigned long arg)
ch_ctrl = &(zfw_ctrl->ch_ctrl[port]);
buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
if (!info->throttle)
cyz_handle_rx(info, ch_ctrl, buf_ctrl);
cyz_handle_tx(info, ch_ctrl, buf_ctrl);
}
......@@ -2553,12 +2558,15 @@ cy_open(struct tty_struct *tty, struct file * filp)
will make the user pay attention.
*/
if (IS_CYC_Z(cy_card[info->card])) {
if (!ISZLOADED(cy_card[info->card])) {
struct cyclades_card *cinfo = &cy_card[info->card];
struct FIRM_ID *firm_id = (struct FIRM_ID *)
(cinfo->base_addr + ID_ADDRESS);
if (!ISZLOADED(*cinfo)) {
if (((ZE_V1 ==cy_readl(&((struct RUNTIME_9060 *)
((cy_card[info->card]).ctl_addr))->mail_box_0)) &&
Z_FPGA_CHECK(cy_card[info->card])) &&
(ZFIRM_HLT==cy_readl(&((struct FIRM_ID *)
((cy_card[info->card]).base_addr+ID_ADDRESS))->signature)))
(cinfo->ctl_addr))->mail_box_0)) &&
Z_FPGA_CHECK (*cinfo)) &&
(ZFIRM_HLT == cy_readl (&firm_id->signature)))
{
printk ("cyc:Cyclades-Z Error: you need an external power supply for this number of ports.\n\rFirmware halted.\r\n");
} else {
......@@ -2571,20 +2579,33 @@ cy_open(struct tty_struct *tty, struct file * filp)
/* In case this Z board is operating in interrupt mode, its
interrupts should be enabled as soon as the first open happens
to one of its ports. */
if (!cy_card[info->card].intr_enabled) {
if (!cinfo->intr_enabled) {
struct ZFW_CTRL *zfw_ctrl;
struct BOARD_CTRL *board_ctrl;
zfw_ctrl = (struct ZFW_CTRL *)
(cinfo->base_addr +
(cy_readl (&firm_id->zfwctrl_addr) & 0xfffff));
board_ctrl = &zfw_ctrl->board_ctrl;
/* Enable interrupts on the PLX chip */
cy_writew(cy_card[info->card].ctl_addr+0x68,
cy_readw(cy_card[info->card].ctl_addr+0x68)|0x0900);
cy_writew(cinfo->ctl_addr+0x68,
cy_readw(cinfo->ctl_addr+0x68)|0x0900);
/* Enable interrupts on the FW */
retval = cyz_issue_cmd(&cy_card[info->card],
retval = cyz_issue_cmd(cinfo,
0, C_CM_IRQ_ENBL, 0L);
if (retval != 0){
printk("cyc:IRQ enable retval was %x\n", retval);
}
cy_card[info->card].intr_enabled = 1;
cinfo->nports = (int) cy_readl (&board_ctrl->n_channel);
cinfo->intr_enabled = 1;
}
}
#endif /* CONFIG_CYZ_INTR */
/* Make sure this Z port really exists in hardware */
if (info->line > (cinfo->first_line + cinfo->nports - 1))
return -ENODEV;
}
#ifdef CY_DEBUG_OTHER
printk("cyc:cy_open ttyC%d\n", info->line); /* */
......@@ -2639,6 +2660,8 @@ cy_open(struct tty_struct *tty, struct file * filp)
return retval;
}
info->throttle = 0;
#ifdef CY_DEBUG_OPEN
printk(" cyc:cy_open done\n");/**/
#endif
......@@ -4283,6 +4306,34 @@ cy_set_termios(struct tty_struct *tty, struct termios * old_termios)
return;
} /* cy_set_termios */
/* This function is used to send a high-priority XON/XOFF character to
the device.
*/
static void
cy_send_xchar (struct tty_struct *tty, char ch)
{
struct cyclades_port *info = (struct cyclades_port *) tty->driver_data;
int card, channel;
if (serial_paranoia_check (info, tty->name, "cy_send_xchar"))
return;
info->x_char = ch;
if (ch)
cy_start (tty);
card = info->card;
channel = info->line - cy_card[card].first_line;
if (IS_CYC_Z (cy_card[card])) {
if (ch == STOP_CHAR (tty))
cyz_issue_cmd (&cy_card[card], channel, C_CM_SENDXOFF, 0L);
else if (ch == START_CHAR (tty))
cyz_issue_cmd (&cy_card[card], channel, C_CM_SENDXON, 0L);
}
}
/* This routine is called by the upper-layer tty layer to signal
that incoming characters should be throttled because the input
buffers are close to full.
......@@ -4307,12 +4358,16 @@ cy_throttle(struct tty_struct * tty)
return;
}
card = info->card;
if (I_IXOFF(tty)) {
info->x_char = STOP_CHAR(tty);
/* Should use the "Send Special Character" feature!!! */
if (!IS_CYC_Z (cy_card[card]))
cy_send_xchar (tty, STOP_CHAR (tty));
else
info->throttle = 1;
}
card = info->card;
if (tty->termios->c_cflag & CRTSCTS) {
channel = info->line - cy_card[card].first_line;
if (!IS_CYC_Z(cy_card[card])) {
chip = channel>>2;
......@@ -4331,7 +4386,8 @@ cy_throttle(struct tty_struct * tty)
}
CY_UNLOCK(info, flags);
} else {
// Nothing to do!
info->throttle = 1;
}
}
return;
......@@ -4367,10 +4423,10 @@ cy_unthrottle(struct tty_struct * tty)
if (info->x_char)
info->x_char = 0;
else
info->x_char = START_CHAR(tty);
/* Should use the "Send Special Character" feature!!! */
cy_send_xchar (tty, START_CHAR (tty));
}
if (tty->termios->c_cflag & CRTSCTS) {
card = info->card;
channel = info->line - cy_card[card].first_line;
if (!IS_CYC_Z(cy_card[card])) {
......@@ -4389,8 +4445,9 @@ cy_unthrottle(struct tty_struct * tty)
cy_writeb((u_long)base_addr+(CyMSVR1<<index), CyRTS);
}
CY_UNLOCK(info, flags);
}else{
// Nothing to do!
} else {
info->throttle = 0;
}
}
return;
......
......@@ -7,6 +7,10 @@
*
* This file contains the general definitions for the cyclades.c driver
*$Log: cyclades.h,v $
*Revision 3.1 2002/01/29 11:36:16 henrique
*added throttle field on struct cyclades_port to indicate whether the
*port is throttled or not
*
*Revision 3.1 2000/04/19 18:52:52 ivan
*converted address fields to unsigned long and added fields for physical
*addresses on cyclades_card structure;
......@@ -141,7 +145,7 @@ struct CYZ_BOOT_CTRL {
/****************** ****************** *******************/
/*
* The data types defined below are used in all ZFIRM interface
* data structures. They accommodate differences between HW
* data structures. They accomodate differences between HW
* architectures and compilers.
*/
......@@ -604,6 +608,7 @@ struct cyclades_port {
wait_queue_head_t close_wait;
wait_queue_head_t shutdown_wait;
wait_queue_head_t delta_msr_wait;
int throttle;
};
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment