[ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)

Signed-off-by: Eric Miao <eric.miao@marvell.com>

arch/arm/mach-pxa/include/mach/mfp-pxa930.h

@@ -421,6 +421,7 @@
 #define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
 #define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
 #define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+#define GPIO32_PWM0		MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
 
 /* CIR */
 #define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)

arch/arm/mach-pxa/tavorevb.c

@@ -18,12 +18,15 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/smc91x.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/hardware.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/mfp-pxa930.h>
+#include <mach/pxafb.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -33,6 +36,45 @@ static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
 	/* Ethernet */
 	DF_nCS1_nCS3,
 	GPIO47_GPIO,
+
+	/* LCD */
+	GPIO23_LCD_DD0,
+	GPIO24_LCD_DD1,
+	GPIO25_LCD_DD2,
+	GPIO26_LCD_DD3,
+	GPIO27_LCD_DD4,
+	GPIO28_LCD_DD5,
+	GPIO29_LCD_DD6,
+	GPIO44_LCD_DD7,
+	GPIO21_LCD_CS,
+	GPIO22_LCD_CS2,
+
+	GPIO17_LCD_FCLK_RD,
+	GPIO18_LCD_LCLK_A0,
+	GPIO19_LCD_PCLK_WR,
+
+	/* LCD Backlight */
+	GPIO43_PWM3,	/* primary backlight */
+	GPIO32_PWM0,	/* secondary backlight */
+
+	/* Keypad */
+	GPIO0_KP_MKIN_0,
+	GPIO2_KP_MKIN_1,
+	GPIO4_KP_MKIN_2,
+	GPIO6_KP_MKIN_3,
+	GPIO8_KP_MKIN_4,
+	GPIO10_KP_MKIN_5,
+	GPIO12_KP_MKIN_6,
+	GPIO1_KP_MKOUT_0,
+	GPIO3_KP_MKOUT_1,
+	GPIO5_KP_MKOUT_2,
+	GPIO7_KP_MKOUT_3,
+	GPIO9_KP_MKOUT_4,
+	GPIO11_KP_MKOUT_5,
+	GPIO13_KP_MKOUT_6,
+
+	GPIO14_KP_DKIN_2,
+	GPIO15_KP_DKIN_3,
 };
 
 #define TAVOREVB_ETH_PHYS	(0x14000000)
@@ -64,12 +106,382 @@ static struct platform_device smc91x_device = {
 	},
 };
 
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int tavorevb_matrix_key_map[] = {
+	/* KEY(row, col, key_code) */
+	KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
+	KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
+	KEY(2, 4, KEY_I), KEY(2, 5, KEY_J), KEY(2, 6, KEY_K),
+	KEY(3, 4, KEY_M), KEY(3, 5, KEY_N), KEY(3, 6, KEY_O),
+	KEY(4, 5, KEY_R), KEY(4, 6, KEY_S),
+	KEY(5, 4, KEY_U), KEY(5, 4, KEY_V), KEY(5, 6, KEY_W),
+
+	KEY(6, 4, KEY_Y), KEY(6, 5, KEY_Z),
+
+	KEY(0, 3, KEY_0), KEY(2, 0, KEY_1), KEY(2, 1, KEY_2), KEY(2, 2, KEY_3),
+	KEY(2, 3, KEY_4), KEY(1, 0, KEY_5), KEY(1, 1, KEY_6), KEY(1, 2, KEY_7),
+	KEY(1, 3, KEY_8), KEY(0, 2, KEY_9),
+
+	KEY(6, 6, KEY_SPACE),
+	KEY(0, 0, KEY_KPASTERISK), 	/* * */
+	KEY(0, 1, KEY_KPDOT), 		/* # */
+
+	KEY(4, 1, KEY_UP),
+	KEY(4, 3, KEY_DOWN),
+	KEY(4, 0, KEY_LEFT),
+	KEY(4, 2, KEY_RIGHT),
+	KEY(6, 0, KEY_HOME),
+	KEY(3, 2, KEY_END),
+	KEY(6, 1, KEY_DELETE),
+	KEY(5, 2, KEY_BACK),
+	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
+
+	KEY(4, 4, KEY_ENTER),		/* scroll push */
+	KEY(6, 2, KEY_ENTER),		/* keypad action */
+
+	KEY(3, 1, KEY_SEND),
+	KEY(5, 3, KEY_RECORD),
+	KEY(5, 0, KEY_VOLUMEUP),
+	KEY(5, 1, KEY_VOLUMEDOWN),
+
+	KEY(3, 0, KEY_F22),	/* soft1 */
+	KEY(3, 3, KEY_F23),	/* soft2 */
+};
+
+static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
+	.matrix_key_rows	= 7,
+	.matrix_key_cols	= 7,
+	.matrix_key_map		= tavorevb_matrix_key_map,
+	.matrix_key_map_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
+	.debounce_interval	= 30,
+};
+
+static void __init tavorevb_init_keypad(void)
+{
+	pxa_set_keypad_info(&tavorevb_keypad_info);
+}
+#else
+static inline void tavorevb_init_keypad(void) {}
+#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
+	[0] = {
+		/* primary backlight */
+		.pwm_id		= 2,
+		.max_brightness	= 100,
+		.dft_brightness	= 100,
+		.pwm_period_ns	= 100000,
+	},
+	[1] = {
+		/* secondary backlight */
+		.pwm_id		= 0,
+		.max_brightness	= 100,
+		.dft_brightness	= 100,
+		.pwm_period_ns	= 100000,
+	},
+};
+
+static struct platform_device tavorevb_backlight_devices[] = {
+	[0] = {
+		.name		= "pwm-backlight",
+		.id		= 0,
+		.dev		= {
+			.platform_data = &tavorevb_backlight_data[0],
+		},
+	},
+	[1] = {
+		.name		= "pwm-backlight",
+		.id		= 1,
+		.dev		= {
+			.platform_data = &tavorevb_backlight_data[1],
+		},
+	},
+};
+
+static uint16_t panel_init[] = {
+	/* DSTB OUT */
+	SMART_CMD(0x00),
+	SMART_CMD_NOOP,
+	SMART_DELAY(1),
+
+	SMART_CMD(0x00),
+	SMART_CMD_NOOP,
+	SMART_DELAY(1),
+
+	SMART_CMD(0x00),
+	SMART_CMD_NOOP,
+	SMART_DELAY(1),
+
+	/* STB OUT */
+	SMART_CMD(0x00),
+	SMART_CMD(0x1D),
+	SMART_DAT(0x00),
+	SMART_DAT(0x05),
+	SMART_DELAY(1),
+
+	/* P-ON Init sequence */
+	SMART_CMD(0x00), /* OSC ON */
+	SMART_CMD(0x00),
+	SMART_DAT(0x00),
+	SMART_DAT(0x01),
+	SMART_CMD(0x00),
+	SMART_CMD(0x01), /* SOURCE DRIVER SHIFT DIRECTION and display RAM setting */
+	SMART_DAT(0x01),
+	SMART_DAT(0x27),
+	SMART_CMD(0x00),
+	SMART_CMD(0x02), /* LINE INV */
+	SMART_DAT(0x02),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x03), /* IF mode(1) */
+	SMART_DAT(0x01), /* 8bit smart mode(8-8),high speed write mode */
+	SMART_DAT(0x30),
+	SMART_CMD(0x07),
+	SMART_CMD(0x00), /* RAM Write Mode */
+	SMART_DAT(0x00),
+	SMART_DAT(0x03),
+	SMART_CMD(0x00),
+
+	/* DISPLAY Setting,  262K, fixed(NO scroll), no split screen */
+	SMART_CMD(0x07),
+	SMART_DAT(0x40), /* 16/18/19 BPP */
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x08), /* BP, FP Seting, BP=2H, FP=3H */
+	SMART_DAT(0x03),
+	SMART_DAT(0x02),
+	SMART_CMD(0x00),
+	SMART_CMD(0x0C), /* IF mode(2), using internal clock & MPU */
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x0D), /* Frame setting, 1Min. Frequence, 16CLK */
+	SMART_DAT(0x00),
+	SMART_DAT(0x10),
+	SMART_CMD(0x00),
+	SMART_CMD(0x12), /* Timing(1),ASW W=4CLK, ASW ST=1CLK */
+	SMART_DAT(0x03),
+	SMART_DAT(0x02),
+	SMART_CMD(0x00),
+	SMART_CMD(0x13), /* Timing(2),OEV ST=0.5CLK, OEV ED=1CLK */
+	SMART_DAT(0x01),
+	SMART_DAT(0x02),
+	SMART_CMD(0x00),
+	SMART_CMD(0x14), /* Timing(3), ASW HOLD=0.5CLK */
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x15), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
+	SMART_DAT(0x20),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x1C),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x03),
+	SMART_CMD(0x00),
+	SMART_DAT(0x04),
+	SMART_DAT(0x03),
+	SMART_CMD(0x03),
+	SMART_CMD(0x01),
+	SMART_DAT(0x03),
+	SMART_DAT(0x04),
+	SMART_CMD(0x03),
+	SMART_CMD(0x02),
+	SMART_DAT(0x04),
+	SMART_DAT(0x03),
+	SMART_CMD(0x03),
+	SMART_CMD(0x03),
+	SMART_DAT(0x03),
+	SMART_DAT(0x03),
+	SMART_CMD(0x03),
+	SMART_CMD(0x04),
+	SMART_DAT(0x01),
+	SMART_DAT(0x01),
+	SMART_CMD(0x03),
+	SMART_CMD(0x05),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x04),
+	SMART_CMD(0x02),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x04),
+	SMART_CMD(0x03),
+	SMART_DAT(0x01),
+	SMART_DAT(0x3F),
+	SMART_DELAY(0),
+
+	/* DISP RAM setting: 240*320 */
+	SMART_CMD(0x04), /* HADDR, START 0 */
+	SMART_CMD(0x06),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00), /* x1,3 */
+	SMART_CMD(0x04), /* HADDR,  END   4 */
+	SMART_CMD(0x07),
+	SMART_DAT(0x00),
+	SMART_DAT(0xEF), /* x2, 7 */
+	SMART_CMD(0x04), /* VADDR, START 8 */
+	SMART_CMD(0x08),
+	SMART_DAT(0x00), /* y1, 10 */
+	SMART_DAT(0x00), /* y1, 11 */
+	SMART_CMD(0x04), /* VADDR, END 12 */
+	SMART_CMD(0x09),
+	SMART_DAT(0x01), /* y2, 14 */
+	SMART_DAT(0x3F), /* y2, 15 */
+	SMART_CMD(0x02), /* RAM ADDR SETTING 16 */
+	SMART_CMD(0x00),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00), /* x1, 19 */
+	SMART_CMD(0x02), /* RAM ADDR SETTING 20 */
+	SMART_CMD(0x01),
+	SMART_DAT(0x00), /* y1, 22 */
+	SMART_DAT(0x00), /* y1, 23 */
+};
+
+static uint16_t panel_on[] = {
+	/* Power-IC ON */
+	SMART_CMD(0x01),
+	SMART_CMD(0x02),
+	SMART_DAT(0x07),
+	SMART_DAT(0x7D),
+	SMART_CMD(0x01),
+	SMART_CMD(0x03),
+	SMART_DAT(0x00),
+	SMART_DAT(0x05),
+	SMART_CMD(0x01),
+	SMART_CMD(0x04),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x01),
+	SMART_CMD(0x05),
+	SMART_DAT(0x00),
+	SMART_DAT(0x15),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xC0),
+	SMART_DAT(0x10),
+	SMART_DELAY(30),
+
+	/* DISP ON */
+	SMART_CMD(0x01),
+	SMART_CMD(0x01),
+	SMART_DAT(0x00),
+	SMART_DAT(0x01),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xFF),
+	SMART_DAT(0xFE),
+	SMART_DELAY(150),
+};
+
+static uint16_t panel_off[] = {
+	SMART_CMD(0x00),
+	SMART_CMD(0x1E),
+	SMART_DAT(0x00),
+	SMART_DAT(0x0A),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xFF),
+	SMART_DAT(0xEE),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xF8),
+	SMART_DAT(0x12),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xE8),
+	SMART_DAT(0x11),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xC0),
+	SMART_DAT(0x11),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0x40),
+	SMART_DAT(0x11),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0x00),
+	SMART_DAT(0x10),
+};
+
+static uint16_t update_framedata[] = {
+	/* write ram */
+	SMART_CMD(0x02),
+	SMART_CMD(0x02),
+
+	/* write frame data */
+	SMART_CMD_WRITE_FRAME,
+};
+
+static void ltm020d550_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+	struct fb_info *info = container_of(var, struct fb_info, var);
+
+	if (on) {
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_init));
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_on));
+	} else {
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_off));
+	}
+
+	if (pxafb_smart_flush(info))
+		pr_err("%s: timed out\n", __func__);
+}
+
+static void ltm020d550_update(struct fb_info *info)
+{
+	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
+	pxafb_smart_flush(info);
+}
+
+static struct pxafb_mode_info toshiba_ltm020d550_modes[] = {
+	[0] = {
+		.xres			= 240,
+		.yres			= 320,
+		.bpp			= 16,
+		.a0csrd_set_hld		= 30,
+		.a0cswr_set_hld		= 30,
+		.wr_pulse_width		= 30,
+		.rd_pulse_width 	= 170,
+		.op_hold_time 		= 30,
+		.cmd_inh_time		= 60,
+
+		/* L_LCLK_A0 and L_LCLK_RD active low */
+		.sync			= FB_SYNC_HOR_HIGH_ACT |
+					  FB_SYNC_VERT_HIGH_ACT,
+	},
+};
+
+static struct pxafb_mach_info tavorevb_lcd_info = {
+	.modes			= toshiba_ltm020d550_modes,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_lcd_power	= ltm020d550_lcd_power,
+	.smart_update		= ltm020d550_update,
+};
+
+static void __init tavorevb_init_lcd(void)
+{
+	platform_device_register(&tavorevb_backlight_devices[0]);
+	platform_device_register(&tavorevb_backlight_devices[1]);
+	set_pxa_fb_info(&tavorevb_lcd_info);
+}
+#else
+static inline void tavorevb_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
 static void __init tavorevb_init(void)
 {
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
 
 	platform_device_register(&smc91x_device);
+
+	tavorevb_init_lcd();
+	tavorevb_init_keypad();
 }
 
 MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")