usb: gadget: aspeed: Don't set port enable change bit on reset

This bit should be only set when the port enable goes down, for
example, on errors. Not when it gets set after a port reset. Some
USB stacks seem to be sensitive to this and fails enumeration.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/gadget/udc/aspeed-vhub/hub.c

@@ -449,8 +449,15 @@ static void ast_vhub_change_port_stat(struct ast_vhub *vhub,
 		       USB_PORT_STAT_C_OVERCURRENT |
 		       USB_PORT_STAT_C_RESET |
 		       USB_PORT_STAT_C_L1;
-		p->change |= chg;
 
+		/*
+		 * We only set USB_PORT_STAT_C_ENABLE if we are disabling
+		 * the port as per USB spec, otherwise MacOS gets upset
+		 */
+		if (p->status & USB_PORT_STAT_ENABLE)
+			chg &= ~USB_PORT_STAT_C_ENABLE;
+
+		p->change = chg;
 		ast_vhub_update_hub_ep1(vhub, port);
 	}
 }