Commit a0125641 authored by Christoph Hellwig's avatar Christoph Hellwig Committed by James Bottomley

[SCSI] sas: add support for enclosure and bad ID rphy attributes

Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent e3094447
/* /*
* Copyright (C) 2005 Dell Inc. * Copyright (C) 2005-2006 Dell Inc.
* Released under GPL v2. * Released under GPL v2.
* *
* Serial Attached SCSI (SAS) transport class. * Serial Attached SCSI (SAS) transport class.
...@@ -38,7 +38,7 @@ ...@@ -38,7 +38,7 @@
#define SAS_HOST_ATTRS 0 #define SAS_HOST_ATTRS 0
#define SAS_PORT_ATTRS 17 #define SAS_PORT_ATTRS 17
#define SAS_RPORT_ATTRS 5 #define SAS_RPORT_ATTRS 7
struct sas_internal { struct sas_internal {
struct scsi_transport_template t; struct scsi_transport_template t;
...@@ -533,6 +533,53 @@ show_sas_rphy_device_type(struct class_device *cdev, char *buf) ...@@ -533,6 +533,53 @@ show_sas_rphy_device_type(struct class_device *cdev, char *buf)
static SAS_CLASS_DEVICE_ATTR(rphy, device_type, S_IRUGO, static SAS_CLASS_DEVICE_ATTR(rphy, device_type, S_IRUGO,
show_sas_rphy_device_type, NULL); show_sas_rphy_device_type, NULL);
static ssize_t
show_sas_rphy_enclosure_identifier(struct class_device *cdev, char *buf)
{
struct sas_rphy *rphy = transport_class_to_rphy(cdev);
struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
struct sas_internal *i = to_sas_internal(shost->transportt);
u64 identifier;
int error;
/*
* Only devices behind an expander are supported, because the
* enclosure identifier is a SMP feature.
*/
if (phy->local_attached)
return -EINVAL;
error = i->f->get_enclosure_identifier(rphy, &identifier);
if (error)
return error;
return sprintf(buf, "0x%llx\n", (unsigned long long)identifier);
}
static SAS_CLASS_DEVICE_ATTR(rphy, enclosure_identifier, S_IRUGO,
show_sas_rphy_enclosure_identifier, NULL);
static ssize_t
show_sas_rphy_bay_identifier(struct class_device *cdev, char *buf)
{
struct sas_rphy *rphy = transport_class_to_rphy(cdev);
struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
struct sas_internal *i = to_sas_internal(shost->transportt);
int val;
if (phy->local_attached)
return -EINVAL;
val = i->f->get_bay_identifier(rphy);
if (val < 0)
return val;
return sprintf(buf, "%d\n", val);
}
static SAS_CLASS_DEVICE_ATTR(rphy, bay_identifier, S_IRUGO,
show_sas_rphy_bay_identifier, NULL);
sas_rphy_protocol_attr(identify.initiator_port_protocols, sas_rphy_protocol_attr(identify.initiator_port_protocols,
initiator_port_protocols); initiator_port_protocols);
sas_rphy_protocol_attr(identify.target_port_protocols, target_port_protocols); sas_rphy_protocol_attr(identify.target_port_protocols, target_port_protocols);
...@@ -845,6 +892,8 @@ sas_attach_transport(struct sas_function_template *ft) ...@@ -845,6 +892,8 @@ sas_attach_transport(struct sas_function_template *ft)
SETUP_RPORT_ATTRIBUTE(rphy_device_type); SETUP_RPORT_ATTRIBUTE(rphy_device_type);
SETUP_RPORT_ATTRIBUTE(rphy_sas_address); SETUP_RPORT_ATTRIBUTE(rphy_sas_address);
SETUP_RPORT_ATTRIBUTE(rphy_phy_identifier); SETUP_RPORT_ATTRIBUTE(rphy_phy_identifier);
SETUP_RPORT_ATTRIBUTE(rphy_enclosure_identifier);
SETUP_RPORT_ATTRIBUTE(rphy_bay_identifier);
i->rphy_attrs[count] = NULL; i->rphy_attrs[count] = NULL;
return &i->t; return &i->t;
......
...@@ -94,6 +94,8 @@ struct sas_rphy { ...@@ -94,6 +94,8 @@ struct sas_rphy {
/* The functions by which the transport class and the driver communicate */ /* The functions by which the transport class and the driver communicate */
struct sas_function_template { struct sas_function_template {
int (*get_linkerrors)(struct sas_phy *); int (*get_linkerrors)(struct sas_phy *);
int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
int (*get_bay_identifier)(struct sas_rphy *);
int (*phy_reset)(struct sas_phy *, int); int (*phy_reset)(struct sas_phy *, int);
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment