scsi: qla2xxx: Wait for ABTS response on I/O timeouts for NVMe

FW needs to wait for an ABTS response before completing the I/O.

Link: https://lore.kernel.org/r/20210111093134.1206-5-njavali@marvell.comReviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/qla2xxx/qla_def.h

@@ -2101,6 +2101,7 @@ typedef struct {
 #define CS_COMPLETE_CHKCOND	0x30	/* Error? */
 #define CS_IOCB_ERROR		0x31	/* Generic error for IOCB request
 					   failure */
+#define CS_REJECT_RECEIVED	0x4E	/* Reject received */
 #define CS_BAD_PAYLOAD		0x80	/* Driver defined */
 #define CS_UNKNOWN		0x81	/* Driver defined */
 #define CS_RETRY		0x82	/* Driver defined */
@@ -4150,6 +4151,17 @@ struct qla_hw_data {
 /* Bit 21 of fw_attributes decides the MCTP capabilities */
 #define IS_MCTP_CAPABLE(ha)	(IS_QLA2031(ha) && \
 				((ha)->fw_attributes_ext[0] & BIT_0))
+#define QLA_ABTS_FW_ENABLED(_ha)       ((_ha)->fw_attributes_ext[0] & BIT_14)
+#define QLA_SRB_NVME_LS(_sp) ((_sp)->type == SRB_NVME_LS)
+#define QLA_SRB_NVME_CMD(_sp) ((_sp)->type == SRB_NVME_CMD)
+#define QLA_NVME_IOS(_sp) (QLA_SRB_NVME_CMD(_sp) || QLA_SRB_NVME_LS(_sp))
+#define QLA_LS_ABTS_WAIT_ENABLED(_sp) \
+	(QLA_SRB_NVME_LS(_sp) && QLA_ABTS_FW_ENABLED(_sp->fcport->vha->hw))
+#define QLA_CMD_ABTS_WAIT_ENABLED(_sp) \
+	(QLA_SRB_NVME_CMD(_sp) && QLA_ABTS_FW_ENABLED(_sp->fcport->vha->hw))
+#define QLA_ABTS_WAIT_ENABLED(_sp) \
+	(QLA_NVME_IOS(_sp) && QLA_ABTS_FW_ENABLED(_sp->fcport->vha->hw))
+
 #define IS_PI_UNINIT_CAPABLE(ha)	(IS_QLA83XX(ha) || IS_QLA27XX(ha))
 #define IS_PI_IPGUARD_CAPABLE(ha)	(IS_QLA83XX(ha) || IS_QLA27XX(ha))
 #define IS_PI_DIFB_DIX0_CAPABLE(ha)	(0)

drivers/scsi/qla2xxx/qla_fw.h

@@ -982,11 +982,18 @@ struct abort_entry_24xx {
 
 	uint32_t handle;		/* System handle. */
 
+	union {
 		__le16 nport_handle;            /* N_PORT handle. */
-					/* or Completion status. */
+		__le16 comp_status;             /* Completion status. */
+	};
 
 	__le16	options;		/* Options. */
 #define AOF_NO_ABTS		BIT_0	/* Do not send any ABTS. */
+#define AOF_NO_RRQ		BIT_1   /* Do not send RRQ. */
+#define AOF_ABTS_TIMEOUT	BIT_2   /* Disable logout on ABTS timeout. */
+#define AOF_ABTS_RTY_CNT	BIT_3   /* Use driver specified retry count. */
+#define AOF_RSP_TIMEOUT		BIT_4   /* Use specified response timeout. */
+
 
 	uint32_t handle_to_abort;	/* System handle to abort. */
 
@@ -995,8 +1002,20 @@ struct abort_entry_24xx {
 
 	uint8_t port_id[3];		/* PortID of destination port. */
 	uint8_t vp_index;
-
-	uint8_t reserved_2[12];
+	u8	reserved_2[4];
+	union {
+		struct {
+			__le16 abts_rty_cnt;
+			__le16 rsp_timeout;
+		} drv;
+		struct {
+			u8	ba_rjt_vendorUnique;
+			u8	ba_rjt_reasonCodeExpl;
+			u8	ba_rjt_reasonCode;
+			u8	reserved_3;
+		} fw;
+	};
+	u8	reserved_4[4];
 };
 
 #define ABTS_RCV_TYPE		0x54

drivers/scsi/qla2xxx/qla_gbl.h

@@ -177,6 +177,7 @@ extern int ql2xexlogins;
 extern int ql2xdifbundlinginternalbuffers;
 extern int ql2xfulldump_on_mpifail;
 extern int ql2xenforce_iocb_limit;
+extern int ql2xabts_wait_nvme;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -941,6 +942,11 @@ int qla2x00_set_data_rate(scsi_qla_host_t *vha, uint16_t mode);
 extern void qla24xx_process_purex_list(struct purex_list *);
 extern void qla2x00_dfs_create_rport(scsi_qla_host_t *vha, struct fc_port *fp);
 extern void qla2x00_dfs_remove_rport(scsi_qla_host_t *vha, struct fc_port *fp);
+extern void qla_wait_nvme_release_cmd_kref(srb_t *sp);
+extern void qla_nvme_abort_set_option
+		(struct abort_entry_24xx *abt, srb_t *sp);
+extern void qla_nvme_abort_process_comp_status
+		(struct abort_entry_24xx *abt, srb_t *sp);
 
 /* nvme.c */
 void qla_nvme_unregister_remote_port(struct fc_port *fcport);

drivers/scsi/qla2xxx/qla_init.c

@@ -136,6 +136,10 @@ static void qla24xx_abort_iocb_timeout(void *data)
 static void qla24xx_abort_sp_done(srb_t *sp, int res)
 {
 	struct srb_iocb *abt = &sp->u.iocb_cmd;
+	srb_t *orig_sp = sp->cmd_sp;
+
+	if (orig_sp)
+		qla_wait_nvme_release_cmd_kref(orig_sp);
 
 	del_timer(&sp->u.iocb_cmd.timer);
 	if (sp->flags & SRB_WAKEUP_ON_COMP)

drivers/scsi/qla2xxx/qla_iocb.c

@@ -3571,6 +3571,7 @@ qla24xx_abort_iocb(srb_t *sp, struct abort_entry_24xx *abt_iocb)
 	struct srb_iocb *aio = &sp->u.iocb_cmd;
 	scsi_qla_host_t *vha = sp->vha;
 	struct req_que *req = sp->qpair->req;
+	srb_t *orig_sp = sp->cmd_sp;
 
 	memset(abt_iocb, 0, sizeof(struct abort_entry_24xx));
 	abt_iocb->entry_type = ABORT_IOCB_TYPE;
@@ -3587,6 +3588,11 @@ qla24xx_abort_iocb(srb_t *sp, struct abort_entry_24xx *abt_iocb)
 			    aio->u.abt.cmd_hndl);
 	abt_iocb->vp_index = vha->vp_idx;
 	abt_iocb->req_que_no = aio->u.abt.req_que_no;
+
+	/* need to pass original sp */
+	if (orig_sp)
+		qla_nvme_abort_set_option(abt_iocb, orig_sp);
+
 	/* Send the command to the firmware */
 	wmb();
 }

drivers/scsi/qla2xxx/qla_isr.c

@@ -5,6 +5,7 @@
  */
 #include "qla_def.h"
 #include "qla_target.h"
+#include "qla_gbl.h"
 
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -3431,6 +3432,7 @@ qla24xx_abort_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 {
 	const char func[] = "ABT_IOCB";
 	srb_t *sp;
+	srb_t *orig_sp = NULL;
 	struct srb_iocb *abt;
 
 	sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
@@ -3438,7 +3440,12 @@ qla24xx_abort_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 		return;
 
 	abt = &sp->u.iocb_cmd;
-	abt->u.abt.comp_status = pkt->nport_handle;
+	abt->u.abt.comp_status = le16_to_cpu(pkt->comp_status);
+	orig_sp = sp->cmd_sp;
+	/* Need to pass original sp */
+	if (orig_sp)
+		qla_nvme_abort_process_comp_status(pkt, orig_sp);
+
 	sp->done(sp, 0);
 }
 

drivers/scsi/qla2xxx/qla_mbx.c

@@ -3243,6 +3243,8 @@ qla24xx_abort_command(srb_t *sp)
 	abt->vp_index = fcport->vha->vp_idx;
 
 	abt->req_que_no = cpu_to_le16(req->id);
+	/* Need to pass original sp */
+	qla_nvme_abort_set_option(abt, sp);
 
 	rval = qla2x00_issue_iocb(vha, abt, abt_dma, 0);
 	if (rval != QLA_SUCCESS) {
@@ -3265,6 +3267,10 @@ qla24xx_abort_command(srb_t *sp)
 		ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1091,
 		    "Done %s.\n", __func__);
 	}
+	if (rval == QLA_SUCCESS)
+		qla_nvme_abort_process_comp_status(abt, sp);
+
+	qla_wait_nvme_release_cmd_kref(sp);
 
 	dma_pool_free(ha->s_dma_pool, abt, abt_dma);
 

drivers/scsi/qla2xxx/qla_nvme.c

@@ -245,6 +245,13 @@ static void qla_nvme_abort_work(struct work_struct *work)
 	    __func__, (rval != QLA_SUCCESS) ? "Failed to abort" : "Aborted",
 	    sp, sp->handle, fcport, rval);
 
+	/*
+	 * Returned before decreasing kref so that I/O requests
+	 * are waited until ABTS complete. This kref is decreased
+	 * at qla24xx_abort_sp_done function.
+	 */
+	if (ql2xabts_wait_nvme && QLA_ABTS_WAIT_ENABLED(sp))
+		return;
 out:
 	/* kref_get was done before work was schedule. */
 	kref_put(&sp->cmd_kref, sp->put_fn);
@@ -284,7 +291,6 @@ static int qla_nvme_ls_req(struct nvme_fc_local_port *lport,
 	struct qla_hw_data *ha;
 	srb_t           *sp;
 
-
 	if (!fcport || (fcport && fcport->deleted))
 		return rval;
 
@@ -591,6 +597,7 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport,
 	sp->put_fn = qla_nvme_release_fcp_cmd_kref;
 	sp->qpair = qpair;
 	sp->vha = vha;
+	sp->cmd_sp = sp;
 	nvme = &sp->u.iocb_cmd;
 	nvme->u.nvme.desc = fd;
 
@@ -744,3 +751,85 @@ int qla_nvme_register_hba(struct scsi_qla_host *vha)
 
 	return ret;
 }
+
+void qla_nvme_abort_set_option(struct abort_entry_24xx *abt, srb_t *orig_sp)
+{
+	struct qla_hw_data *ha;
+
+	if (!(ql2xabts_wait_nvme && QLA_ABTS_WAIT_ENABLED(orig_sp)))
+		return;
+
+	ha = orig_sp->fcport->vha->hw;
+
+	WARN_ON_ONCE(abt->options & cpu_to_le16(BIT_0));
+	/* Use Driver Specified Retry Count */
+	abt->options |= cpu_to_le16(AOF_ABTS_RTY_CNT);
+	abt->drv.abts_rty_cnt = cpu_to_le16(2);
+	/* Use specified response timeout */
+	abt->options |= cpu_to_le16(AOF_RSP_TIMEOUT);
+	/* set it to 2 * r_a_tov in secs */
+	abt->drv.rsp_timeout = cpu_to_le16(2 * (ha->r_a_tov / 10));
+}
+
+void qla_nvme_abort_process_comp_status(struct abort_entry_24xx *abt, srb_t *orig_sp)
+{
+	u16	comp_status;
+	struct scsi_qla_host *vha;
+
+	if (!(ql2xabts_wait_nvme && QLA_ABTS_WAIT_ENABLED(orig_sp)))
+		return;
+
+	vha = orig_sp->fcport->vha;
+
+	comp_status = le16_to_cpu(abt->comp_status);
+	switch (comp_status) {
+	case CS_RESET:		/* reset event aborted */
+	case CS_ABORTED:	/* IOCB was cleaned */
+	/* N_Port handle is not currently logged in */
+	case CS_TIMEOUT:
+	/* N_Port handle was logged out while waiting for ABTS to complete */
+	case CS_PORT_UNAVAILABLE:
+	/* Firmware found that the port name changed */
+	case CS_PORT_LOGGED_OUT:
+	/* BA_RJT was received for the ABTS */
+	case CS_PORT_CONFIG_CHG:
+		ql_dbg(ql_dbg_async + ql_dbg_mbx, vha, 0xf09d,
+		       "Abort I/O IOCB completed with error, comp_status=%x\n",
+		comp_status);
+		break;
+
+	/* BA_RJT was received for the ABTS */
+	case CS_REJECT_RECEIVED:
+		ql_dbg(ql_dbg_async + ql_dbg_mbx, vha, 0xf09e,
+		       "BA_RJT was received for the ABTS rjt_vendorUnique = %u",
+			abt->fw.ba_rjt_vendorUnique);
+		ql_dbg(ql_dbg_async + ql_dbg_mbx, vha, 0xf09e,
+		       "ba_rjt_reasonCodeExpl = %u, ba_rjt_reasonCode = %u\n",
+		       abt->fw.ba_rjt_reasonCodeExpl, abt->fw.ba_rjt_reasonCode);
+		break;
+
+	case CS_COMPLETE:
+		ql_dbg(ql_dbg_async + ql_dbg_mbx, vha, 0xf09f,
+		       "IOCB request is completed successfully comp_status=%x\n",
+		comp_status);
+		break;
+
+	case CS_IOCB_ERROR:
+		ql_dbg(ql_dbg_async + ql_dbg_mbx, vha, 0xf0a0,
+		       "IOCB request is failed, comp_status=%x\n", comp_status);
+		break;
+
+	default:
+		ql_dbg(ql_dbg_async + ql_dbg_mbx, vha, 0xf0a1,
+		       "Invalid Abort IO IOCB Completion Status %x\n",
+		comp_status);
+		break;
+	}
+}
+
+inline void qla_wait_nvme_release_cmd_kref(srb_t *orig_sp)
+{
+	if (!(ql2xabts_wait_nvme && QLA_ABTS_WAIT_ENABLED(orig_sp)))
+		return;
+	kref_put(&orig_sp->cmd_kref, orig_sp->put_fn);
+}

drivers/scsi/qla2xxx/qla_os.c

@@ -327,6 +327,11 @@ MODULE_PARM_DESC(ql2xrdpenable,
 		"Enables RDP responses. "
 		"0 - no RDP responses (default). "
 		"1 - provide RDP responses.");
+int ql2xabts_wait_nvme = 1;
+module_param(ql2xabts_wait_nvme, int, 0444);
+MODULE_PARM_DESC(ql2xabts_wait_nvme,
+		 "To wait for ABTS response on I/O timeouts for NVMe. (default: 1)");
+
 
 static void qla2x00_clear_drv_active(struct qla_hw_data *);
 static void qla2x00_free_device(scsi_qla_host_t *);