mctp: Add MCTP-over-serial transport binding

This change adds a MCTP Serial transport binding, as defined by DMTF
specificiation DSP0253 - "MCTP Serial Transport Binding". This is
implemented as a new serial line discipline, and can be attached to
arbitrary tty devices.

From the Kconfig description:

  This driver provides an MCTP-over-serial interface, through a
  serial line-discipline, as defined by DMTF specification "DSP0253 -
  MCTP Serial Transport Binding". By attaching the ldisc to a serial
  device, we get a new net device to transport MCTP packets.

  This allows communication with external MCTP endpoints which use
  serial as their transport. It can also be used as an easy way to
  provide MCTP connectivity between virtual machines, by forwarding
  data between simple virtual serial devices.

  Say y here if you need to connect to MCTP endpoints over serial. To
  compile as a module, use m; the module will be called mctp-serial.

Once the N_MCTP line discipline is set [using ioctl(TCIOSETD)], we get a
new netdev suitable for MCTP communication.

The 'mctp' utility[1] provides a simple wrapper for this ioctl, using
'link serial <device>':

  # mctp link serial /dev/ttyS0 &
  # mctp link
  dev lo index 1 address 0x00:00:00:00:00:00 net 1 mtu 65536 up
  dev mctpserial0 index 5 address 0x(no-addr) net 1 mtu 68 down

[1]: https://github.com/CodeConstruct/mctpSigned-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/mctp/Kconfig

@@ -3,6 +3,24 @@ if MCTP
 
 menu "MCTP Device Drivers"
 
+config MCTP_SERIAL
+	tristate "MCTP serial transport"
+	depends on TTY
+	select CRC_CCITT
+	help
+	  This driver provides an MCTP-over-serial interface, through a
+	  serial line-discipline, as defined by DMTF specification "DSP0253 -
+	  MCTP Serial Transport Binding". By attaching the ldisc to a serial
+	  device, we get a new net device to transport MCTP packets.
+
+	  This allows communication with external MCTP endpoints which use
+	  serial as their transport. It can also be used as an easy way to
+	  provide MCTP connectivity between virtual machines, by forwarding
+	  data between simple virtual serial devices.
+
+	  Say y here if you need to connect to MCTP endpoints over serial. To
+	  compile as a module, use m; the module will be called mctp-serial.
+
 endmenu
 
 endif

drivers/net/mctp/Makefile

+obj-$(CONFIG_MCTP_SERIAL) += mctp-serial.o

include/uapi/linux/tty.h

@@ -38,5 +38,6 @@
 #define N_NCI		25	/* NFC NCI UART */
 #define N_SPEAKUP	26	/* Speakup communication with synths */
 #define N_NULL		27	/* Null ldisc used for error handling */
+#define N_MCTP		28	/* MCTP-over-serial */
 
 #endif /* _UAPI_LINUX_TTY_H */