Commit a11fbba9 authored by Sebastian Siewior's avatar Sebastian Siewior Committed by David S. Miller

net/cpsw: fix irq_disable() with threaded interrupts

During high throughput it is likely that we receive both: an RX and TX
interrupt. The normal behaviour is that once we enter the ISR the
interrupts are disabled in the IRQ chip and so the ISR is invoked only
once and the interrupt line is disabled once. It will be re-enabled
after napi completes.
With threaded interrupts on the other hand the interrupt the interrupt
is disabled immediately and the ISR is marked for "later". By having TX
and RX interrupt marked pending we invoke them both and disable the
interrupt line twice. The napi callback is still executed once and so
after it completes we remain with interrupts disabled.

The initial patch simply removed the cpsw_{enable|disable}_irq() calls
and it worked well on my AM335X ES1.0 (beagle bone). On ES2.0 (beagle
bone black) it caused an never ending interrupt (even after the mask via
cpsw_intr_disable()) according to Mugunthan V N. Since I don't have the
ES2.0 and no idea what is going on this patch tracks the state of the
irq_disable() call and execute it only when not yet done.
The book keeping is done on the first struct since with dual_emac we can
have two of those and only one interrupt line.
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: default avatarMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6e6ceaed
......@@ -348,6 +348,7 @@ struct cpsw_priv {
/* snapshot of IRQ numbers */
u32 irqs_table[4];
u32 num_irqs;
bool irq_enabled;
struct cpts *cpts;
u32 emac_port;
};
......@@ -515,7 +516,10 @@ static irqreturn_t cpsw_interrupt(int irq, void *dev_id)
return IRQ_NONE;
cpsw_intr_disable(priv);
if (priv->irq_enabled == true) {
cpsw_disable_irq(priv);
priv->irq_enabled = false;
}
if (netif_running(priv->ndev)) {
napi_schedule(&priv->napi);
......@@ -544,10 +548,16 @@ static int cpsw_poll(struct napi_struct *napi, int budget)
num_rx = cpdma_chan_process(priv->rxch, budget);
if (num_rx < budget) {
struct cpsw_priv *prim_cpsw;
napi_complete(napi);
cpsw_intr_enable(priv);
cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX);
prim_cpsw = cpsw_get_slave_priv(priv, 0);
if (prim_cpsw->irq_enabled == false) {
cpsw_enable_irq(priv);
prim_cpsw->irq_enabled = true;
}
}
if (num_rx || num_tx)
......@@ -886,6 +896,7 @@ static void cpsw_slave_stop(struct cpsw_slave *slave, struct cpsw_priv *priv)
static int cpsw_ndo_open(struct net_device *ndev)
{
struct cpsw_priv *priv = netdev_priv(ndev);
struct cpsw_priv *prim_cpsw;
int i, ret;
u32 reg;
......@@ -953,6 +964,14 @@ static int cpsw_ndo_open(struct net_device *ndev)
cpsw_set_coalesce(ndev, &coal);
}
prim_cpsw = cpsw_get_slave_priv(priv, 0);
if (prim_cpsw->irq_enabled == false) {
if ((priv == prim_cpsw) || !netif_running(prim_cpsw->ndev)) {
prim_cpsw->irq_enabled = true;
cpsw_enable_irq(prim_cpsw);
}
}
cpdma_ctlr_start(priv->dma);
cpsw_intr_enable(priv);
napi_enable(&priv->napi);
......@@ -1614,7 +1633,7 @@ static int cpsw_probe_dual_emac(struct platform_device *pdev,
priv_sl2->irqs_table[i] = priv->irqs_table[i];
priv_sl2->num_irqs = priv->num_irqs;
}
priv->irq_enabled = true;
ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
ndev->netdev_ops = &cpsw_netdev_ops;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment