Skip to content

L
linux
Commit a153cf9d authored by Eric W. Biederman's avatar Eric W. Biederman
Browse files
Options

sysctl: Stop using binary sysctl numbers in arlan. 

Looking at the arlan code it appears all of the sysctl
entries are disabled debug code, and have not been enabled
since the driver was merged in feb of 2003.

Since except for a select few that userspace can't
get along without the binary sysctl table entries
are going away.  Kill the unused arlan binary sysctls.

Cc: John W. Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: default avatarEric W. Biederman <ebiederm@xmission.com>
parent 961303c4
Hide whitespace changes
Inline Side-by-side
Showing with 69 additions and 112 deletions
drivers/net/wireless/arlan-proc.c
View file @ a153cf9d
......@@ -816,84 +816,83 @@ static int arlan_sysctl_reset(ctl_table * ctl, int write,
/* Place files in /proc/sys/dev/arlan */
#define CTBLN(num,card,nam) \
{ .ctl_name = num,\
.procname = #nam,\
#define CTBLN(card,nam) \
{ .procname = #nam,\
.data = &(arlan_conf[card].nam),\
.maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec}
#ifdef ARLAN_DEBUGGING
#define ARLAN_PROC_DEBUG_ENTRIES \
{ .ctl_name = 48, .procname = "entry_exit_debug",\
{ .procname = "entry_exit_debug",\
.data = &arlan_entry_and_exit_debug,\
.maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},\
{ .ctl_name = 49, .procname = "debug", .data = &arlan_debug,\
{ .procname = "debug", .data = &arlan_debug,\
.maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},
#else
#define ARLAN_PROC_DEBUG_ENTRIES
#endif
#define ARLAN_SYSCTL_TABLE_TOTAL(cardNo)\
CTBLN(1,cardNo,spreadingCode),\
CTBLN(2,cardNo, channelNumber),\
CTBLN(3,cardNo, scramblingDisable),\
CTBLN(4,cardNo, txAttenuation),\
CTBLN(5,cardNo, systemId), \
CTBLN(6,cardNo, maxDatagramSize),\
CTBLN(7,cardNo, maxFrameSize),\
CTBLN(8,cardNo, maxRetries),\
CTBLN(9,cardNo, receiveMode),\
CTBLN(10,cardNo, priority),\
CTBLN(11,cardNo, rootOrRepeater),\
CTBLN(12,cardNo, SID),\
CTBLN(13,cardNo, registrationMode),\
CTBLN(14,cardNo, registrationFill),\
CTBLN(15,cardNo, localTalkAddress),\
CTBLN(16,cardNo, codeFormat),\
CTBLN(17,cardNo, numChannels),\
CTBLN(18,cardNo, channel1),\
CTBLN(19,cardNo, channel2),\
CTBLN(20,cardNo, channel3),\
CTBLN(21,cardNo, channel4),\
CTBLN(22,cardNo, txClear),\
CTBLN(23,cardNo, txRetries),\
CTBLN(24,cardNo, txRouting),\
CTBLN(25,cardNo, txScrambled),\
CTBLN(26,cardNo, rxParameter),\
CTBLN(27,cardNo, txTimeoutMs),\
CTBLN(28,cardNo, waitCardTimeout),\
CTBLN(29,cardNo, channelSet), \
{.ctl_name = 30, .procname = "name",\
CTBLN(cardNo,spreadingCode),\
CTBLN(cardNo, channelNumber),\
CTBLN(cardNo, scramblingDisable),\
CTBLN(cardNo, txAttenuation),\
CTBLN(cardNo, systemId), \
CTBLN(cardNo, maxDatagramSize),\
CTBLN(cardNo, maxFrameSize),\
CTBLN(cardNo, maxRetries),\
CTBLN(cardNo, receiveMode),\
CTBLN(cardNo, priority),\
CTBLN(cardNo, rootOrRepeater),\
CTBLN(cardNo, SID),\
CTBLN(cardNo, registrationMode),\
CTBLN(cardNo, registrationFill),\
CTBLN(cardNo, localTalkAddress),\
CTBLN(cardNo, codeFormat),\
CTBLN(cardNo, numChannels),\
CTBLN(cardNo, channel1),\
CTBLN(cardNo, channel2),\
CTBLN(cardNo, channel3),\
CTBLN(cardNo, channel4),\
CTBLN(cardNo, txClear),\
CTBLN(cardNo, txRetries),\
CTBLN(cardNo, txRouting),\
CTBLN(cardNo, txScrambled),\
CTBLN(cardNo, rxParameter),\
CTBLN(cardNo, txTimeoutMs),\
CTBLN(cardNo, waitCardTimeout),\
CTBLN(cardNo, channelSet), \
{ .procname = "name",\
.data = arlan_conf[cardNo].siteName,\
.maxlen = 16, .mode = 0600, .proc_handler = &proc_dostring},\
CTBLN(31,cardNo,waitTime),\
CTBLN(32,cardNo,lParameter),\
CTBLN(33,cardNo,_15),\
CTBLN(34,cardNo,headerSize),\
CTBLN(36,cardNo,tx_delay_ms),\
CTBLN(37,cardNo,retries),\
CTBLN(38,cardNo,ReTransmitPacketMaxSize),\
CTBLN(39,cardNo,waitReTransmitPacketMaxSize),\
CTBLN(40,cardNo,fastReTransCount),\
CTBLN(41,cardNo,driverRetransmissions),\
CTBLN(42,cardNo,txAckTimeoutMs),\
CTBLN(43,cardNo,registrationInterrupts),\
CTBLN(44,cardNo,hardwareType),\
CTBLN(45,cardNo,radioType),\
CTBLN(46,cardNo,writeEEPROM),\
CTBLN(47,cardNo,writeRadioType),\
CTBLN(cardNo,waitTime),\
CTBLN(cardNo,lParameter),\
CTBLN(cardNo,_15),\
CTBLN(cardNo,headerSize),\
CTBLN(cardNo,tx_delay_ms),\
CTBLN(cardNo,retries),\
CTBLN(cardNo,ReTransmitPacketMaxSize),\
CTBLN(cardNo,waitReTransmitPacketMaxSize),\
CTBLN(cardNo,fastReTransCount),\
CTBLN(cardNo,driverRetransmissions),\
CTBLN(cardNo,txAckTimeoutMs),\
CTBLN(cardNo,registrationInterrupts),\
CTBLN(cardNo,hardwareType),\
CTBLN(cardNo,radioType),\
CTBLN(cardNo,writeEEPROM),\
CTBLN(cardNo,writeRadioType),\
ARLAN_PROC_DEBUG_ENTRIES\
CTBLN(50,cardNo,in_speed),\
CTBLN(51,cardNo,out_speed),\
CTBLN(52,cardNo,in_speed10),\
CTBLN(53,cardNo,out_speed10),\
CTBLN(54,cardNo,in_speed_max),\
CTBLN(55,cardNo,out_speed_max),\
CTBLN(56,cardNo,measure_rate),\
CTBLN(57,cardNo,pre_Command_Wait),\
CTBLN(58,cardNo,rx_tweak1),\
CTBLN(59,cardNo,rx_tweak2),\
CTBLN(60,cardNo,tx_queue_len),\
CTBLN(cardNo,in_speed),\
CTBLN(cardNo,out_speed),\
CTBLN(cardNo,in_speed10),\
CTBLN(cardNo,out_speed10),\
CTBLN(cardNo,in_speed_max),\
CTBLN(cardNo,out_speed_max),\
CTBLN(cardNo,measure_rate),\
CTBLN(cardNo,pre_Command_Wait),\
CTBLN(cardNo,rx_tweak1),\
CTBLN(cardNo,rx_tweak2),\
CTBLN(cardNo,tx_queue_len),\
......@@ -903,7 +902,6 @@ static ctl_table arlan_conf_table0[] =
#ifdef ARLAN_PROC_SHM_DUMP
{
.ctl_name = 150,
.procname = "arlan0-txRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -911,7 +909,6 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_sysctl_infotxRing,
},
{
.ctl_name = 151,
.procname = "arlan0-rxRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -919,7 +916,6 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_sysctl_inforxRing,
},
{
.ctl_name = 152,
.procname = "arlan0-18",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -927,7 +923,6 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_sysctl_info18,
},
{
.ctl_name = 153,
.procname = "arlan0-ring",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -935,7 +930,6 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_sysctl_info161719,
},
{
.ctl_name = 154,
.procname = "arlan0-shm-cpy",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -944,7 +938,6 @@ static ctl_table arlan_conf_table0[] =
},
#endif
{
.ctl_name = 155,
.procname = "config0",
.data = &conf_reset_result,
.maxlen = 100,
......@@ -952,14 +945,13 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_configure
},
{
.ctl_name = 156,
.procname = "reset0",
.data = &conf_reset_result,
.maxlen = 100,
.mode = 0400,
.proc_handler = &arlan_sysctl_reset,
},
{ .ctl_name = 0 }
{ }
};
static ctl_table arlan_conf_table1[] =
......@@ -969,7 +961,6 @@ static ctl_table arlan_conf_table1[] =
#ifdef ARLAN_PROC_SHM_DUMP
{
.ctl_name = 150,
.procname = "arlan1-txRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -977,7 +968,6 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_sysctl_infotxRing,
},
{
.ctl_name = 151,
.procname = "arlan1-rxRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -985,7 +975,6 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_sysctl_inforxRing,
},
{
.ctl_name = 152,
.procname = "arlan1-18",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -993,7 +982,6 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_sysctl_info18,
},
{
.ctl_name = 153,
.procname = "arlan1-ring",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1001,7 +989,6 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_sysctl_info161719,
},
{
.ctl_name = 154,
.procname = "arlan1-shm-cpy",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1010,7 +997,6 @@ static ctl_table arlan_conf_table1[] =
},
#endif
{
.ctl_name = 155,
.procname = "config1",
.data = &conf_reset_result,
.maxlen = 100,
......@@ -1018,14 +1004,13 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_configure,
},
{
.ctl_name = 156,
.procname = "reset1",
.data = &conf_reset_result,
.maxlen = 100,
.mode = 0400,
.proc_handler = &arlan_sysctl_reset,
},
{ .ctl_name = 0 }
{ }
};
static ctl_table arlan_conf_table2[] =
......@@ -1035,7 +1020,6 @@ static ctl_table arlan_conf_table2[] =
#ifdef ARLAN_PROC_SHM_DUMP
{
.ctl_name = 150,
.procname = "arlan2-txRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1043,7 +1027,6 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_sysctl_infotxRing,
},
{
.ctl_name = 151,
.procname = "arlan2-rxRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1051,7 +1034,6 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_sysctl_inforxRing,
},
{
.ctl_name = 152,
.procname = "arlan2-18",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1059,7 +1041,6 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_sysctl_info18,
},
{
.ctl_name = 153,
.procname = "arlan2-ring",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1067,7 +1048,6 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_sysctl_info161719,
},
{
.ctl_name = 154,
.procname = "arlan2-shm-cpy",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1076,7 +1056,6 @@ static ctl_table arlan_conf_table2[] =
},
#endif
{
.ctl_name = 155,
.procname = "config2",
.data = &conf_reset_result,
.maxlen = 100,
......@@ -1084,14 +1063,13 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_configure,
},
{
.ctl_name = 156,
.procname = "reset2",
.data = &conf_reset_result,
.maxlen = 100,
.mode = 0400,
.proc_handler = &arlan_sysctl_reset,
},
{ .ctl_name = 0 }
{ }
};
static ctl_table arlan_conf_table3[] =
......@@ -1101,7 +1079,6 @@ static ctl_table arlan_conf_table3[] =
#ifdef ARLAN_PROC_SHM_DUMP
{
.ctl_name = 150,
.procname = "arlan3-txRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1109,7 +1086,6 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_sysctl_infotxRing,
},
{
.ctl_name = 151,
.procname = "arlan3-rxRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1117,7 +1093,6 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_sysctl_inforxRing,
},
{
.ctl_name = 152,
.procname = "arlan3-18",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1125,7 +1100,6 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_sysctl_info18,
},
{
.ctl_name = 153,
.procname = "arlan3-ring",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1133,7 +1107,6 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_sysctl_info161719,
},
{
.ctl_name = 154,
.procname = "arlan3-shm-cpy",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
......@@ -1142,7 +1115,6 @@ static ctl_table arlan_conf_table3[] =
},
#endif
{
.ctl_name = 155,
.procname = "config3",
.data = &conf_reset_result,
.maxlen = 100,
......@@ -1150,14 +1122,13 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_configure,
},
{
.ctl_name = 156,
.procname = "reset3",
.data = &conf_reset_result,
.maxlen = 100,
.mode = 0400,
.proc_handler = &arlan_sysctl_reset,
},
{ .ctl_name = 0 }
{ }
};
......@@ -1165,41 +1136,37 @@ static ctl_table arlan_conf_table3[] =
static ctl_table arlan_table[] =
{
{
.ctl_name = 0,
.procname = "arlan0",
.maxlen = 0,
.mode = 0600,
.child = arlan_conf_table0,
},
{
.ctl_name = 0,
.procname = "arlan1",
.maxlen = 0,
.mode = 0600,
.child = arlan_conf_table1,
},
{
.ctl_name = 0,
.procname = "arlan2",
.maxlen = 0,
.mode = 0600,
.child = arlan_conf_table2,
},
{
.ctl_name = 0,
.procname = "arlan3",
.maxlen = 0,
.mode = 0600,
.child = arlan_conf_table3,
},
{ .ctl_name = 0 }
{ }
};
#else
static ctl_table arlan_table[MAX_ARLANS + 1] =
static ctl_table arlan_table[] =
{
{ .ctl_name = 0 }
{ }
};
#endif
......@@ -1209,22 +1176,14 @@ static ctl_table arlan_table[MAX_ARLANS + 1] =
static ctl_table arlan_root_table[] =
{
{
.ctl_name = CTL_ARLAN,
.procname = "arlan",
.maxlen = 0,
.mode = 0555,
.child = arlan_table,
},
{ .ctl_name = 0 }
{ }
};
/* Make sure that /proc/sys/dev is there */
//static ctl_table arlan_device_root_table[] =
//{
// {CTL_DEV, "dev", NULL, 0, 0555, arlan_root_table},
// {0}
//};
static struct ctl_table_header *arlan_device_sysctl_header;
......@@ -1234,8 +1193,6 @@ int __init init_arlan_proc(void)
int i = 0;
if (arlan_device_sysctl_header)
return 0;
for (i = 0; i < MAX_ARLANS && arlan_device[i]; i++)
arlan_table[i].ctl_name = i + 1;
arlan_device_sysctl_header = register_sysctl_table(arlan_root_table);
if (!arlan_device_sysctl_header)
return -1;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7