Commit a17a733e authored by Rafael J. Wysocki's avatar Rafael J. Wysocki

Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull ARM cpufreq updates for 5.10-rc1 from Viresh Kumar:

"- STI cpufreq driver updates to allow new hardware (Alain Volmat).

 - Minor tegra driver fixes around initial frequency mismatch warnings (Jon
   Hunter).

 - dev_err simplification for s5pv210 driver (Krzysztof Kozlowski).

 - Qcom driver updates to allow new hardware and minor cleanup (Manivannan
   Sadhasivam and Matthias Kaehlcke).

 - Add missing MODULE_DEVICE_TABLE for armada driver (Pali Rohár).

 - Improved defer-probe handling in cpufreq-dt driver (Stephan Gerhold).

 - Call dev_pm_opp_of_remove_table() unconditionally for imx driver (Viresh
   Kumar)."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: qcom: Don't add frequencies without an OPP
  cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC
  cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size
  cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code
  dt-bindings: cpufreq: cpufreq-qcom-hw: Document Qcom EPSS compatible
  cpufreq: qcom-hw: Make use of cpufreq driver_data for passing pdev
  cpufreq: armada-37xx: Add missing MODULE_DEVICE_TABLE
  cpufreq: arm: Kconfig: add CPUFREQ_DT depend for STI CPUFREQ
  cpufreq: dt-platdev: Blacklist st,stih418 SoC
  cpufreq: sti-cpufreq: add stih418 support
  cpufreq: s5pv210: Use dev_err instead of pr_err in probe
  cpufreq: s5pv210: Simplify with dev_err_probe()
  cpufreq: tegra186: Fix initial frequency
  cpufreq: dt: Refactor initialization to handle probe deferral properly
  opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()
  cpufreq: imx6q: Unconditionally call dev_pm_opp_of_remove_table()
  opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
parents 08d8c65e bc9b9c5a
......@@ -8,7 +8,7 @@ Properties:
- compatible
Usage: required
Value type: <string>
Definition: must be "qcom,cpufreq-hw".
Definition: must be "qcom,cpufreq-hw" or "qcom,cpufreq-epss".
- clocks
Usage: required
......
......@@ -2044,6 +2044,7 @@ int of_genpd_add_provider_simple(struct device_node *np,
if (genpd->set_performance_state) {
ret = dev_pm_opp_of_add_table(&genpd->dev);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(&genpd->dev, "Failed to add OPP table: %d\n",
ret);
goto unlock;
......@@ -2054,7 +2055,7 @@ int of_genpd_add_provider_simple(struct device_node *np,
* state.
*/
genpd->opp_table = dev_pm_opp_get_opp_table(&genpd->dev);
WARN_ON(!genpd->opp_table);
WARN_ON(IS_ERR(genpd->opp_table));
}
ret = genpd_add_provider(np, genpd_xlate_simple, genpd);
......@@ -2111,6 +2112,7 @@ int of_genpd_add_provider_onecell(struct device_node *np,
if (genpd->set_performance_state) {
ret = dev_pm_opp_of_add_table_indexed(&genpd->dev, i);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(&genpd->dev, "Failed to add OPP table for index %d: %d\n",
i, ret);
goto error;
......@@ -2121,7 +2123,7 @@ int of_genpd_add_provider_onecell(struct device_node *np,
* performance state.
*/
genpd->opp_table = dev_pm_opp_get_opp_table_indexed(&genpd->dev, i);
WARN_ON(!genpd->opp_table);
WARN_ON(IS_ERR(genpd->opp_table));
}
genpd->provider = &np->fwnode;
......
......@@ -283,7 +283,7 @@ config ARM_SPEAR_CPUFREQ
config ARM_STI_CPUFREQ
tristate "STi CPUFreq support"
depends on SOC_STIH407
depends on CPUFREQ_DT && SOC_STIH407
help
This driver uses the generic OPP framework to match the running
platform with a predefined set of suitable values. If not provided
......
......@@ -484,6 +484,12 @@ static int __init armada37xx_cpufreq_driver_init(void)
/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
late_initcall(armada37xx_cpufreq_driver_init);
static const struct of_device_id __maybe_unused armada37xx_cpufreq_of_match[] = {
{ .compatible = "marvell,armada-3700-nb-pm" },
{ },
};
MODULE_DEVICE_TABLE(of, armada37xx_cpufreq_of_match);
MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
MODULE_LICENSE("GPL");
......@@ -137,6 +137,7 @@ static const struct of_device_id blacklist[] __initconst = {
{ .compatible = "st,stih407", },
{ .compatible = "st,stih410", },
{ .compatible = "st,stih418", },
{ .compatible = "sigma,tango4", },
......
......@@ -13,6 +13,7 @@
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm_opp.h>
......@@ -24,18 +25,35 @@
#include "cpufreq-dt.h"
struct private_data {
struct opp_table *opp_table;
struct list_head node;
cpumask_var_t cpus;
struct device *cpu_dev;
const char *reg_name;
struct opp_table *opp_table;
struct opp_table *reg_opp_table;
bool have_static_opps;
};
static LIST_HEAD(priv_list);
static struct freq_attr *cpufreq_dt_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL, /* Extra space for boost-attr if required */
NULL,
};
static struct private_data *cpufreq_dt_find_data(int cpu)
{
struct private_data *priv;
list_for_each_entry(priv, &priv_list, node) {
if (cpumask_test_cpu(cpu, priv->cpus))
return priv;
}
return NULL;
}
static int set_target(struct cpufreq_policy *policy, unsigned int index)
{
struct private_data *priv = policy->driver_data;
......@@ -82,83 +100,24 @@ static const char *find_supply_name(struct device *dev)
return name;
}
static int resources_available(void)
{
struct device *cpu_dev;
struct regulator *cpu_reg;
struct clk *cpu_clk;
int ret = 0;
const char *name;
cpu_dev = get_cpu_device(0);
if (!cpu_dev) {
pr_err("failed to get cpu0 device\n");
return -ENODEV;
}
cpu_clk = clk_get(cpu_dev, NULL);
ret = PTR_ERR_OR_ZERO(cpu_clk);
if (ret) {
/*
* If cpu's clk node is present, but clock is not yet
* registered, we should try defering probe.
*/
if (ret == -EPROBE_DEFER)
dev_dbg(cpu_dev, "clock not ready, retry\n");
else
dev_err(cpu_dev, "failed to get clock: %d\n", ret);
return ret;
}
clk_put(cpu_clk);
ret = dev_pm_opp_of_find_icc_paths(cpu_dev, NULL);
if (ret)
return ret;
name = find_supply_name(cpu_dev);
/* Platform doesn't require regulator */
if (!name)
return 0;
cpu_reg = regulator_get_optional(cpu_dev, name);
ret = PTR_ERR_OR_ZERO(cpu_reg);
if (ret) {
/*
* If cpu's regulator supply node is present, but regulator is
* not yet registered, we should try defering probe.
*/
if (ret == -EPROBE_DEFER)
dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
else
dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret);
return ret;
}
regulator_put(cpu_reg);
return 0;
}
static int cpufreq_init(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *freq_table;
struct opp_table *opp_table = NULL;
struct private_data *priv;
struct device *cpu_dev;
struct clk *cpu_clk;
unsigned int transition_latency;
bool fallback = false;
const char *name;
int ret;
cpu_dev = get_cpu_device(policy->cpu);
if (!cpu_dev) {
pr_err("failed to get cpu%d device\n", policy->cpu);
priv = cpufreq_dt_find_data(policy->cpu);
if (!priv) {
pr_err("failed to find data for cpu%d\n", policy->cpu);
return -ENODEV;
}
cpu_dev = priv->cpu_dev;
cpumask_copy(policy->cpus, priv->cpus);
cpu_clk = clk_get(cpu_dev, NULL);
if (IS_ERR(cpu_clk)) {
ret = PTR_ERR(cpu_clk);
......@@ -166,45 +125,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
return ret;
}
/* Get OPP-sharing information from "operating-points-v2" bindings */
ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
if (ret) {
if (ret != -ENOENT)
goto out_put_clk;
/*
* operating-points-v2 not supported, fallback to old method of
* finding shared-OPPs for backward compatibility if the
* platform hasn't set sharing CPUs.
*/
if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus))
fallback = true;
}
/*
* OPP layer will be taking care of regulators now, but it needs to know
* the name of the regulator first.
*/
name = find_supply_name(cpu_dev);
if (name) {
opp_table = dev_pm_opp_set_regulators(cpu_dev, &name, 1);
if (IS_ERR(opp_table)) {
ret = PTR_ERR(opp_table);
dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
policy->cpu, ret);
goto out_put_clk;
}
}
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
goto out_put_regulator;
}
priv->reg_name = name;
priv->opp_table = opp_table;
/*
* Initialize OPP tables for all policy->cpus. They will be shared by
* all CPUs which have marked their CPUs shared with OPP bindings.
......@@ -224,31 +144,17 @@ static int cpufreq_init(struct cpufreq_policy *policy)
*/
ret = dev_pm_opp_get_opp_count(cpu_dev);
if (ret <= 0) {
dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
ret = -EPROBE_DEFER;
dev_err(cpu_dev, "OPP table can't be empty\n");
ret = -ENODEV;
goto out_free_opp;
}
if (fallback) {
cpumask_setall(policy->cpus);
/*
* OPP tables are initialized only for policy->cpu, do it for
* others as well.
*/
ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
if (ret)
dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
__func__, ret);
}
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
goto out_free_opp;
}
priv->cpu_dev = cpu_dev;
policy->driver_data = priv;
policy->clk = cpu_clk;
policy->freq_table = freq_table;
......@@ -280,11 +186,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
out_free_opp:
if (priv->have_static_opps)
dev_pm_opp_of_cpumask_remove_table(policy->cpus);
kfree(priv);
out_put_regulator:
if (name)
dev_pm_opp_put_regulators(opp_table);
out_put_clk:
clk_put(cpu_clk);
return ret;
......@@ -312,12 +213,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
if (priv->have_static_opps)
dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
if (priv->reg_name)
dev_pm_opp_put_regulators(priv->opp_table);
clk_put(policy->clk);
kfree(priv);
return 0;
}
......@@ -336,21 +232,119 @@ static struct cpufreq_driver dt_cpufreq_driver = {
.suspend = cpufreq_generic_suspend,
};
static int dt_cpufreq_probe(struct platform_device *pdev)
static int dt_cpufreq_early_init(struct device *dev, int cpu)
{
struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev);
struct private_data *priv;
struct device *cpu_dev;
const char *reg_name;
int ret;
/* Check if this CPU is already covered by some other policy */
if (cpufreq_dt_find_data(cpu))
return 0;
cpu_dev = get_cpu_device(cpu);
if (!cpu_dev)
return -EPROBE_DEFER;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
if (!alloc_cpumask_var(&priv->cpus, GFP_KERNEL))
return -ENOMEM;
priv->cpu_dev = cpu_dev;
/* Try to get OPP table early to ensure resources are available */
priv->opp_table = dev_pm_opp_get_opp_table(cpu_dev);
if (IS_ERR(priv->opp_table)) {
ret = PTR_ERR(priv->opp_table);
if (ret != -EPROBE_DEFER)
dev_err(cpu_dev, "failed to get OPP table: %d\n", ret);
goto free_cpumask;
}
/*
* All per-cluster (CPUs sharing clock/voltages) initialization is done
* from ->init(). In probe(), we just need to make sure that clk and
* regulators are available. Else defer probe and retry.
*
* FIXME: Is checking this only for CPU0 sufficient ?
* OPP layer will be taking care of regulators now, but it needs to know
* the name of the regulator first.
*/
ret = resources_available();
reg_name = find_supply_name(cpu_dev);
if (reg_name) {
priv->reg_opp_table = dev_pm_opp_set_regulators(cpu_dev,
&reg_name, 1);
if (IS_ERR(priv->reg_opp_table)) {
ret = PTR_ERR(priv->reg_opp_table);
if (ret != -EPROBE_DEFER)
dev_err(cpu_dev, "failed to set regulators: %d\n",
ret);
goto put_table;
}
}
/* Find OPP sharing information so we can fill pri->cpus here */
/* Get OPP-sharing information from "operating-points-v2" bindings */
ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, priv->cpus);
if (ret) {
if (ret != -ENOENT)
goto put_reg;
/*
* operating-points-v2 not supported, fallback to all CPUs share
* OPP for backward compatibility if the platform hasn't set
* sharing CPUs.
*/
if (dev_pm_opp_get_sharing_cpus(cpu_dev, priv->cpus)) {
cpumask_setall(priv->cpus);
/*
* OPP tables are initialized only for cpu, do it for
* others as well.
*/
ret = dev_pm_opp_set_sharing_cpus(cpu_dev, priv->cpus);
if (ret)
dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
__func__, ret);
}
}
list_add(&priv->node, &priv_list);
return 0;
put_reg:
if (priv->reg_opp_table)
dev_pm_opp_put_regulators(priv->reg_opp_table);
put_table:
dev_pm_opp_put_opp_table(priv->opp_table);
free_cpumask:
free_cpumask_var(priv->cpus);
return ret;
}
static void dt_cpufreq_release(void)
{
struct private_data *priv, *tmp;
list_for_each_entry_safe(priv, tmp, &priv_list, node) {
if (priv->reg_opp_table)
dev_pm_opp_put_regulators(priv->reg_opp_table);
dev_pm_opp_put_opp_table(priv->opp_table);
free_cpumask_var(priv->cpus);
list_del(&priv->node);
}
}
static int dt_cpufreq_probe(struct platform_device *pdev)
{
struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev);
int ret, cpu;
/* Request resources early so we can return in case of -EPROBE_DEFER */
for_each_possible_cpu(cpu) {
ret = dt_cpufreq_early_init(&pdev->dev, cpu);
if (ret)
goto err;
}
if (data) {
if (data->have_governor_per_policy)
......@@ -366,15 +360,21 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
}
ret = cpufreq_register_driver(&dt_cpufreq_driver);
if (ret)
if (ret) {
dev_err(&pdev->dev, "failed register driver: %d\n", ret);
goto err;
}
return 0;
err:
dt_cpufreq_release();
return ret;
}
static int dt_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&dt_cpufreq_driver);
dt_cpufreq_release();
return 0;
}
......
......@@ -48,7 +48,6 @@ static struct clk_bulk_data clks[] = {
};
static struct device *cpu_dev;
static bool free_opp;
static struct cpufreq_frequency_table *freq_table;
static unsigned int max_freq;
static unsigned int transition_latency;
......@@ -390,9 +389,6 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
goto put_reg;
}
/* Because we have added the OPPs here, we must free them */
free_opp = true;
if (of_machine_is_compatible("fsl,imx6ul") ||
of_machine_is_compatible("fsl,imx6ull")) {
ret = imx6ul_opp_check_speed_grading(cpu_dev);
......@@ -507,7 +503,6 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
free_freq_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
out_free_opp:
if (free_opp)
dev_pm_opp_of_remove_table(cpu_dev);
put_reg:
if (!IS_ERR(arm_reg))
......@@ -528,7 +523,6 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&imx6q_cpufreq_driver);
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
if (free_opp)
dev_pm_opp_of_remove_table(cpu_dev);
regulator_put(arm_reg);
if (!IS_ERR(pu_reg))
......
......@@ -19,18 +19,23 @@
#define LUT_L_VAL GENMASK(7, 0)
#define LUT_CORE_COUNT GENMASK(18, 16)
#define LUT_VOLT GENMASK(11, 0)
#define LUT_ROW_SIZE 32
#define CLK_HW_DIV 2
#define LUT_TURBO_IND 1
/* Register offsets */
#define REG_ENABLE 0x0
#define REG_FREQ_LUT 0x110
#define REG_VOLT_LUT 0x114
#define REG_PERF_STATE 0x920
struct qcom_cpufreq_soc_data {
u32 reg_enable;
u32 reg_freq_lut;
u32 reg_volt_lut;
u32 reg_perf_state;
u8 lut_row_size;
};
struct qcom_cpufreq_data {
void __iomem *base;
const struct qcom_cpufreq_soc_data *soc_data;
};
static unsigned long cpu_hw_rate, xo_rate;
static struct platform_device *global_pdev;
static bool icc_scaling_enabled;
static int qcom_cpufreq_set_bw(struct cpufreq_policy *policy,
......@@ -77,10 +82,11 @@ static int qcom_cpufreq_update_opp(struct device *cpu_dev,
static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
unsigned int index)
{
void __iomem *perf_state_reg = policy->driver_data;
struct qcom_cpufreq_data *data = policy->driver_data;
const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
unsigned long freq = policy->freq_table[index].frequency;
writel_relaxed(index, perf_state_reg);
writel_relaxed(index, data->base + soc_data->reg_perf_state);
if (icc_scaling_enabled)
qcom_cpufreq_set_bw(policy, freq);
......@@ -90,7 +96,8 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
{
void __iomem *perf_state_reg;
struct qcom_cpufreq_data *data;
const struct qcom_cpufreq_soc_data *soc_data;
struct cpufreq_policy *policy;
unsigned int index;
......@@ -98,9 +105,10 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
if (!policy)
return 0;
perf_state_reg = policy->driver_data;
data = policy->driver_data;
soc_data = data->soc_data;
index = readl_relaxed(perf_state_reg);
index = readl_relaxed(data->base + soc_data->reg_perf_state);
index = min(index, LUT_MAX_ENTRIES - 1);
return policy->freq_table[index].frequency;
......@@ -109,18 +117,18 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
unsigned int target_freq)
{
void __iomem *perf_state_reg = policy->driver_data;
struct qcom_cpufreq_data *data = policy->driver_data;
const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
unsigned int index;
index = policy->cached_resolved_idx;
writel_relaxed(index, perf_state_reg);
writel_relaxed(index, data->base + soc_data->reg_perf_state);
return policy->freq_table[index].frequency;
}
static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
struct cpufreq_policy *policy,
void __iomem *base)
struct cpufreq_policy *policy)
{
u32 data, src, lval, i, core_count, prev_freq = 0, freq;
u32 volt;
......@@ -128,6 +136,8 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
struct dev_pm_opp *opp;
unsigned long rate;
int ret;
struct qcom_cpufreq_data *drv_data = policy->driver_data;
const struct qcom_cpufreq_soc_data *soc_data = drv_data->soc_data;
table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
if (!table)
......@@ -154,14 +164,14 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
}
for (i = 0; i < LUT_MAX_ENTRIES; i++) {
data = readl_relaxed(base + REG_FREQ_LUT +
i * LUT_ROW_SIZE);
data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut +
i * soc_data->lut_row_size);
src = FIELD_GET(LUT_SRC, data);
lval = FIELD_GET(LUT_L_VAL, data);
core_count = FIELD_GET(LUT_CORE_COUNT, data);
data = readl_relaxed(base + REG_VOLT_LUT +
i * LUT_ROW_SIZE);
data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut +
i * soc_data->lut_row_size);
volt = FIELD_GET(LUT_VOLT, data) * 1000;
if (src)
......@@ -170,10 +180,15 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
freq = cpu_hw_rate / 1000;
if (freq != prev_freq && core_count != LUT_TURBO_IND) {
if (!qcom_cpufreq_update_opp(cpu_dev, freq, volt)) {
table[i].frequency = freq;
qcom_cpufreq_update_opp(cpu_dev, freq, volt);
dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
freq, core_count);
} else {
dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", freq);
table[i].frequency = CPUFREQ_ENTRY_INVALID;
}
} else if (core_count == LUT_TURBO_IND) {
table[i].frequency = CPUFREQ_ENTRY_INVALID;
}
......@@ -190,9 +205,13 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
* as the boost frequency
*/
if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
if (!qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt)) {
prev->frequency = prev_freq;
prev->flags = CPUFREQ_BOOST_FREQ;
qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt);
} else {
dev_warn(cpu_dev, "failed to update OPP for freq=%d\n",
freq);
}
}
break;
......@@ -231,14 +250,38 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
}
}
static const struct qcom_cpufreq_soc_data qcom_soc_data = {
.reg_enable = 0x0,
.reg_freq_lut = 0x110,
.reg_volt_lut = 0x114,
.reg_perf_state = 0x920,
.lut_row_size = 32,
};
static const struct qcom_cpufreq_soc_data epss_soc_data = {
.reg_enable = 0x0,
.reg_freq_lut = 0x100,
.reg_volt_lut = 0x200,
.reg_perf_state = 0x320,
.lut_row_size = 4,
};
static const struct of_device_id qcom_cpufreq_hw_match[] = {
{ .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data },
{ .compatible = "qcom,cpufreq-epss", .data = &epss_soc_data },
{}
};
MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
{
struct device *dev = &global_pdev->dev;
struct platform_device *pdev = cpufreq_get_driver_data();
struct device *dev = &pdev->dev;
struct of_phandle_args args;
struct device_node *cpu_np;
struct device *cpu_dev;
struct resource *res;
void __iomem *base;
struct qcom_cpufreq_data *data;
int ret, index;
cpu_dev = get_cpu_device(policy->cpu);
......@@ -260,16 +303,21 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
index = args.args[0];
res = platform_get_resource(global_pdev, IORESOURCE_MEM, index);
if (!res)
return -ENODEV;
base = devm_platform_ioremap_resource(pdev, index);
if (IS_ERR(base))
return PTR_ERR(base);
base = devm_ioremap(dev, res->start, resource_size(res));
if (!base)
return -ENOMEM;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
goto error;
}
data->soc_data = of_device_get_match_data(&pdev->dev);
data->base = base;
/* HW should be in enabled state to proceed */
if (!(readl_relaxed(base + REG_ENABLE) & 0x1)) {
if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) {
dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
ret = -ENODEV;
goto error;
......@@ -282,9 +330,9 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
goto error;
}
policy->driver_data = base + REG_PERF_STATE;
policy->driver_data = data;
ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base);
ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
if (ret) {
dev_err(dev, "Domain-%d failed to read LUT\n", index);
goto error;
......@@ -308,12 +356,13 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
{
struct device *cpu_dev = get_cpu_device(policy->cpu);
void __iomem *base = policy->driver_data - REG_PERF_STATE;
struct qcom_cpufreq_data *data = policy->driver_data;
struct platform_device *pdev = cpufreq_get_driver_data();
dev_pm_opp_remove_all_dynamic(cpu_dev);
dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
kfree(policy->freq_table);
devm_iounmap(&global_pdev->dev, base);
devm_iounmap(&pdev->dev, data->base);
return 0;
}
......@@ -358,7 +407,7 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV;
clk_put(clk);
global_pdev = pdev;
cpufreq_qcom_hw_driver.driver_data = pdev;
/* Check for optional interconnect paths on CPU0 */
cpu_dev = get_cpu_device(0);
......@@ -383,12 +432,6 @@ static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev)
return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver);
}
static const struct of_device_id qcom_cpufreq_hw_match[] = {
{ .compatible = "qcom,cpufreq-hw" },
{}
};
MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
static struct platform_driver qcom_cpufreq_hw_driver = {
.probe = qcom_cpufreq_hw_driver_probe,
.remove = qcom_cpufreq_hw_driver_remove,
......
......@@ -590,6 +590,7 @@ static struct notifier_block s5pv210_cpufreq_reboot_notifier = {
static int s5pv210_cpufreq_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np;
int id, result = 0;
......@@ -602,28 +603,20 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
* cpufreq-dt driver.
*/
arm_regulator = regulator_get(NULL, "vddarm");
if (IS_ERR(arm_regulator)) {
if (PTR_ERR(arm_regulator) == -EPROBE_DEFER)
pr_debug("vddarm regulator not ready, defer\n");
else
pr_err("failed to get regulator vddarm\n");
return PTR_ERR(arm_regulator);
}
if (IS_ERR(arm_regulator))
return dev_err_probe(dev, PTR_ERR(arm_regulator),
"failed to get regulator vddarm\n");
int_regulator = regulator_get(NULL, "vddint");
if (IS_ERR(int_regulator)) {
if (PTR_ERR(int_regulator) == -EPROBE_DEFER)
pr_debug("vddint regulator not ready, defer\n");
else
pr_err("failed to get regulator vddint\n");
result = PTR_ERR(int_regulator);
result = dev_err_probe(dev, PTR_ERR(int_regulator),
"failed to get regulator vddint\n");
goto err_int_regulator;
}
np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock");
if (!np) {
pr_err("%s: failed to find clock controller DT node\n",
__func__);
dev_err(dev, "failed to find clock controller DT node\n");
result = -ENODEV;
goto err_clock;
}
......@@ -631,7 +624,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
clk_base = of_iomap(np, 0);
of_node_put(np);
if (!clk_base) {
pr_err("%s: failed to map clock registers\n", __func__);
dev_err(dev, "failed to map clock registers\n");
result = -EFAULT;
goto err_clock;
}
......@@ -639,8 +632,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
for_each_compatible_node(np, NULL, "samsung,s5pv210-dmc") {
id = of_alias_get_id(np, "dmc");
if (id < 0 || id >= ARRAY_SIZE(dmc_base)) {
pr_err("%s: failed to get alias of dmc node '%pOFn'\n",
__func__, np);
dev_err(dev, "failed to get alias of dmc node '%pOFn'\n", np);
of_node_put(np);
result = id;
goto err_clk_base;
......@@ -648,8 +640,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
dmc_base[id] = of_iomap(np, 0);
if (!dmc_base[id]) {
pr_err("%s: failed to map dmc%d registers\n",
__func__, id);
dev_err(dev, "failed to map dmc%d registers\n", id);
of_node_put(np);
result = -EFAULT;
goto err_dmc;
......@@ -658,7 +649,7 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
for (id = 0; id < ARRAY_SIZE(dmc_base); ++id) {
if (!dmc_base[id]) {
pr_err("%s: failed to find dmc%d node\n", __func__, id);
dev_err(dev, "failed to find dmc%d node\n", id);
result = -ENODEV;
goto err_dmc;
}
......
......@@ -141,7 +141,8 @@ static const struct reg_field sti_stih407_dvfs_regfields[DVFS_MAX_REGFIELDS] = {
static const struct reg_field *sti_cpufreq_match(void)
{
if (of_machine_is_compatible("st,stih407") ||
of_machine_is_compatible("st,stih410"))
of_machine_is_compatible("st,stih410") ||
of_machine_is_compatible("st,stih418"))
return sti_stih407_dvfs_regfields;
return NULL;
......@@ -258,7 +259,8 @@ static int sti_cpufreq_init(void)
int ret;
if ((!of_machine_is_compatible("st,stih407")) &&
(!of_machine_is_compatible("st,stih410")))
(!of_machine_is_compatible("st,stih410")) &&
(!of_machine_is_compatible("st,stih418")))
return -ENODEV;
ddata.cpu = get_cpu_device(0);
......
......@@ -14,6 +14,7 @@
#define EDVD_CORE_VOLT_FREQ(core) (0x20 + (core) * 0x4)
#define EDVD_CORE_VOLT_FREQ_F_SHIFT 0
#define EDVD_CORE_VOLT_FREQ_F_MASK 0xffff
#define EDVD_CORE_VOLT_FREQ_V_SHIFT 16
struct tegra186_cpufreq_cluster_info {
......@@ -91,10 +92,39 @@ static int tegra186_cpufreq_set_target(struct cpufreq_policy *policy,
return 0;
}
static unsigned int tegra186_cpufreq_get(unsigned int cpu)
{
struct cpufreq_frequency_table *tbl;
struct cpufreq_policy *policy;
void __iomem *edvd_reg;
unsigned int i, freq = 0;
u32 ndiv;
policy = cpufreq_cpu_get(cpu);
if (!policy)
return 0;
tbl = policy->freq_table;
edvd_reg = policy->driver_data;
ndiv = readl(edvd_reg) & EDVD_CORE_VOLT_FREQ_F_MASK;
for (i = 0; tbl[i].frequency != CPUFREQ_TABLE_END; i++) {
if ((tbl[i].driver_data & EDVD_CORE_VOLT_FREQ_F_MASK) == ndiv) {
freq = tbl[i].frequency;
break;
}
}
cpufreq_cpu_put(policy);
return freq;
}
static struct cpufreq_driver tegra186_cpufreq_driver = {
.name = "tegra186",
.flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.get = tegra186_cpufreq_get,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = tegra186_cpufreq_set_target,
.init = tegra186_cpufreq_init,
......
......@@ -1068,7 +1068,7 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
*/
opp_table = kzalloc(sizeof(*opp_table), GFP_KERNEL);
if (!opp_table)
return NULL;
return ERR_PTR(-ENOMEM);
mutex_init(&opp_table->lock);
mutex_init(&opp_table->genpd_virt_dev_lock);
......@@ -1079,8 +1079,8 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
opp_dev = _add_opp_dev(dev, opp_table);
if (!opp_dev) {
kfree(opp_table);
return NULL;
ret = -ENOMEM;
goto err;
}
_of_init_opp_table(opp_table, dev, index);
......@@ -1089,16 +1089,21 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
opp_table->clk = clk_get(dev, NULL);
if (IS_ERR(opp_table->clk)) {
ret = PTR_ERR(opp_table->clk);
if (ret != -EPROBE_DEFER)
dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__,
ret);
if (ret == -EPROBE_DEFER)
goto err;
dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, ret);
}
/* Find interconnect path(s) for the device */
ret = dev_pm_opp_of_find_icc_paths(dev, opp_table);
if (ret)
if (ret) {
if (ret == -EPROBE_DEFER)
goto err;
dev_warn(dev, "%s: Error finding interconnect paths: %d\n",
__func__, ret);
}
BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head);
INIT_LIST_HEAD(&opp_table->opp_list);
......@@ -1107,6 +1112,10 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
/* Secure the device table modification */
list_add(&opp_table->node, &opp_tables);
return opp_table;
err:
kfree(opp_table);
return ERR_PTR(ret);
}
void _get_opp_table_kref(struct opp_table *opp_table)
......@@ -1129,7 +1138,7 @@ static struct opp_table *_opp_get_opp_table(struct device *dev, int index)
if (opp_table) {
if (!_add_opp_dev_unlocked(dev, opp_table)) {
dev_pm_opp_put_opp_table(opp_table);
opp_table = NULL;
opp_table = ERR_PTR(-ENOMEM);
}
goto unlock;
}
......@@ -1581,8 +1590,8 @@ struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev,
struct opp_table *opp_table;
opp_table = dev_pm_opp_get_opp_table(dev);
if (!opp_table)
return ERR_PTR(-ENOMEM);
if (IS_ERR(opp_table))
return opp_table;
/* Make sure there are no concurrent readers while updating opp_table */
WARN_ON(!list_empty(&opp_table->opp_list));
......@@ -1640,8 +1649,8 @@ struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name)
struct opp_table *opp_table;
opp_table = dev_pm_opp_get_opp_table(dev);
if (!opp_table)
return ERR_PTR(-ENOMEM);
if (IS_ERR(opp_table))
return opp_table;
/* Make sure there are no concurrent readers while updating opp_table */
WARN_ON(!list_empty(&opp_table->opp_list));
......@@ -1733,8 +1742,8 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
int ret, i;
opp_table = dev_pm_opp_get_opp_table(dev);
if (!opp_table)
return ERR_PTR(-ENOMEM);
if (IS_ERR(opp_table))
return opp_table;
/* This should be called before OPPs are initialized */
if (WARN_ON(!list_empty(&opp_table->opp_list))) {
......@@ -1843,8 +1852,8 @@ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name)
int ret;
opp_table = dev_pm_opp_get_opp_table(dev);
if (!opp_table)
return ERR_PTR(-ENOMEM);
if (IS_ERR(opp_table))
return opp_table;
/* This should be called before OPPs are initialized */
if (WARN_ON(!list_empty(&opp_table->opp_list))) {
......@@ -1911,8 +1920,8 @@ struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev,
return ERR_PTR(-EINVAL);
opp_table = dev_pm_opp_get_opp_table(dev);
if (!opp_table)
return ERR_PTR(-ENOMEM);
if (!IS_ERR(opp_table))
return opp_table;
/* This should be called before OPPs are initialized */
if (WARN_ON(!list_empty(&opp_table->opp_list))) {
......@@ -1992,8 +2001,8 @@ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev,
const char **name = names;
opp_table = dev_pm_opp_get_opp_table(dev);
if (!opp_table)
return ERR_PTR(-ENOMEM);
if (IS_ERR(opp_table))
return opp_table;
/*
* If the genpd's OPP table isn't already initialized, parsing of the
......@@ -2163,8 +2172,8 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
int ret;
opp_table = dev_pm_opp_get_opp_table(dev);
if (!opp_table)
return -ENOMEM;
if (IS_ERR(opp_table))
return PTR_ERR(opp_table);
/* Fix regulator count for dynamic OPPs */
opp_table->regulator_count = 1;
......
......@@ -886,11 +886,25 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
const __be32 *val;
int nr, ret = 0;
mutex_lock(&opp_table->lock);
if (opp_table->parsed_static_opps) {
opp_table->parsed_static_opps++;
mutex_unlock(&opp_table->lock);
return 0;
}
opp_table->parsed_static_opps = 1;
mutex_unlock(&opp_table->lock);
prop = of_find_property(dev->of_node, "operating-points", NULL);
if (!prop)
return -ENODEV;
if (!prop->value)
return -ENODATA;
if (!prop) {
ret = -ENODEV;
goto remove_static_opp;
}
if (!prop->value) {
ret = -ENODATA;
goto remove_static_opp;
}
/*
* Each OPP is a set of tuples consisting of frequency and
......@@ -899,13 +913,10 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
nr = prop->length / sizeof(u32);
if (nr % 2) {
dev_err(dev, "%s: Invalid OPP table\n", __func__);
return -EINVAL;
ret = -EINVAL;
goto remove_static_opp;
}
mutex_lock(&opp_table->lock);
opp_table->parsed_static_opps = 1;
mutex_unlock(&opp_table->lock);
val = prop->value;
while (nr) {
unsigned long freq = be32_to_cpup(val++) * 1000;
......@@ -915,12 +926,14 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
if (ret) {
dev_err(dev, "%s: Failed to add OPP %ld (%d)\n",
__func__, freq, ret);
_opp_remove_all_static(opp_table);
return ret;
goto remove_static_opp;
}
nr -= 2;
}
remove_static_opp:
_opp_remove_all_static(opp_table);
return ret;
}
......@@ -947,8 +960,8 @@ int dev_pm_opp_of_add_table(struct device *dev)
int ret;
opp_table = dev_pm_opp_get_opp_table_indexed(dev, 0);
if (!opp_table)
return -ENOMEM;
if (IS_ERR(opp_table))
return PTR_ERR(opp_table);
/*
* OPPs have two version of bindings now. Also try the old (v1)
......@@ -1002,8 +1015,8 @@ int dev_pm_opp_of_add_table_indexed(struct device *dev, int index)
}
opp_table = dev_pm_opp_get_opp_table_indexed(dev, index);
if (!opp_table)
return -ENOMEM;
if (IS_ERR(opp_table))
return PTR_ERR(opp_table);
ret = _of_add_opp_table_v2(dev, opp_table);
if (ret)
......
......@@ -93,7 +93,7 @@ static int exynos_asv_update_opps(struct exynos_asv *asv)
continue;
opp_table = dev_pm_opp_get_opp_table(cpu);
if (IS_ERR_OR_NULL(opp_table))
if (IS_ERR(opp_table))
continue;
if (!last_opp_table || opp_table != last_opp_table) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment