Commit a1854fae authored by Prameela Rani Garnepudi's avatar Prameela Rani Garnepudi Committed by Kalle Valo

rsi: improve RX packet handling in USB interface

Curretly, RX packet processing is done sequencially. To improve
the efficiency, RX skb queue is introduced.
Here, while preparing RX URB skb is allocated and used
for RX buffer. When rx done handler is called, enqueue the skb
to rx_q and set the thread event.
RX thread is modified to dequeue packets from skb queue and
process further.
Signed-off-by: default avatarPrameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 8809f08c
......@@ -29,6 +29,8 @@ MODULE_PARM_DESC(dev_oper_mode,
"9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
"6[AP + BT classic], 14[AP + BT classic + BT LE]");
static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num);
/**
* rsi_usb_card_write() - This function writes to the USB Card.
* @adapter: Pointer to the adapter structure.
......@@ -260,12 +262,31 @@ static void rsi_rx_done_handler(struct urb *urb)
{
struct rx_usb_ctrl_block *rx_cb = urb->context;
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)rx_cb->data;
int status = -EINVAL;
if (urb->status)
return;
goto out;
if (urb->actual_length <= 0) {
rsi_dbg(INFO_ZONE, "%s: Zero length packet\n", __func__);
goto out;
}
if (skb_queue_len(&dev->rx_q) >= RSI_MAX_RX_PKTS) {
rsi_dbg(INFO_ZONE, "Max RX packets reached\n");
goto out;
}
skb_put(rx_cb->rx_skb, urb->actual_length);
skb_queue_tail(&dev->rx_q, rx_cb->rx_skb);
rx_cb->pend = 1;
rsi_set_event(&dev->rx_thread.event);
status = 0;
out:
if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num))
rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
if (status)
dev_kfree_skb(rx_cb->rx_skb);
}
/**
......@@ -280,13 +301,26 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
struct rx_usb_ctrl_block *rx_cb = &dev->rx_cb[ep_num - 1];
struct urb *urb = rx_cb->rx_urb;
int status;
struct sk_buff *skb;
u8 dword_align_bytes = 0;
#define RSI_MAX_RX_USB_PKT_SIZE 3000
skb = dev_alloc_skb(RSI_MAX_RX_USB_PKT_SIZE);
if (!skb)
return -ENOMEM;
skb_reserve(skb, MAX_DWORD_ALIGN_BYTES);
dword_align_bytes = (unsigned long)skb->data & 0x3f;
if (dword_align_bytes > 0)
skb_push(skb, dword_align_bytes);
urb->transfer_buffer = skb->data;
rx_cb->rx_skb = skb;
usb_fill_bulk_urb(urb,
dev->usbdev,
usb_rcvbulkpipe(dev->usbdev,
dev->bulkin_endpoint_addr[ep_num - 1]),
urb->transfer_buffer,
3000,
RSI_MAX_RX_USB_PKT_SIZE,
rsi_rx_done_handler,
rx_cb);
......@@ -502,13 +536,9 @@ static void rsi_deinit_usb_interface(struct rsi_hw *adapter)
rsi_kill_thread(&dev->rx_thread);
usb_free_urb(dev->rx_cb[0].rx_urb);
kfree(dev->rx_cb[0].rx_buffer);
if (adapter->priv->coex_mode > 1) {
if (adapter->priv->coex_mode > 1)
usb_free_urb(dev->rx_cb[1].rx_urb);
kfree(dev->rx_cb[1].rx_buffer);
}
kfree(adapter->priv->rx_data_pkt);
kfree(dev->tx_buffer);
}
......@@ -523,29 +553,29 @@ static int rsi_usb_init_rx(struct rsi_hw *adapter)
for (idx = 0; idx < num_rx_cb; idx++) {
rx_cb = &dev->rx_cb[idx];
rx_cb->rx_buffer = kzalloc(RSI_USB_BUF_SIZE * 2,
GFP_KERNEL);
if (!rx_cb->rx_buffer)
goto err;
rx_cb->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!rx_cb->rx_urb) {
rsi_dbg(ERR_ZONE, "Failed alloc rx urb[%d]\n", idx);
goto err;
}
rx_cb->rx_urb->transfer_buffer = rx_cb->rx_buffer;
rx_cb->ep_num = idx + 1;
rx_cb->data = (void *)dev;
}
skb_queue_head_init(&dev->rx_q);
rsi_init_event(&dev->rx_thread.event);
if (rsi_create_kthread(adapter->priv, &dev->rx_thread,
rsi_usb_rx_thread, "RX-Thread")) {
rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__);
goto err;
}
return 0;
err:
kfree(dev->rx_cb[0].rx_buffer);
usb_free_urb(dev->rx_cb[0].rx_urb);
if (adapter->priv->coex_mode > 1) {
kfree(dev->rx_cb[1].rx_buffer);
if (adapter->priv->coex_mode > 1)
usb_free_urb(dev->rx_cb[1].rx_urb);
}
return -1;
}
......@@ -560,7 +590,6 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
struct usb_interface *pfunction)
{
struct rsi_91x_usbdev *rsi_dev;
struct rsi_common *common = adapter->priv;
int status;
rsi_dev = kzalloc(sizeof(*rsi_dev), GFP_KERNEL);
......@@ -569,49 +598,37 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
adapter->rsi_dev = rsi_dev;
rsi_dev->usbdev = interface_to_usbdev(pfunction);
rsi_dev->priv = (void *)adapter;
if (rsi_find_bulk_in_and_out_endpoints(pfunction, adapter))
return -EINVAL;
if (rsi_find_bulk_in_and_out_endpoints(pfunction, adapter)) {
status = -EINVAL;
goto fail_eps;
}
adapter->device = &pfunction->dev;
usb_set_intfdata(pfunction, adapter);
common->rx_data_pkt = kmalloc(2048, GFP_KERNEL);
if (!common->rx_data_pkt) {
rsi_dbg(ERR_ZONE, "%s: Failed to allocate memory\n",
__func__);
return -ENOMEM;
}
rsi_dev->tx_buffer = kmalloc(2048, GFP_KERNEL);
if (!rsi_dev->tx_buffer) {
status = -ENOMEM;
goto fail_tx;
goto fail_eps;
}
if (rsi_usb_init_rx(adapter)) {
rsi_dbg(ERR_ZONE, "Failed to init RX handle\n");
return -ENOMEM;
status = -ENOMEM;
goto fail_rx;
}
rsi_dev->tx_blk_size = 252;
adapter->block_size = rsi_dev->tx_blk_size;
/* Initializing function callbacks */
adapter->rx_urb_submit = rsi_rx_urb_submit;
adapter->check_hw_queue_status = rsi_usb_check_queue_status;
adapter->determine_event_timeout = rsi_usb_event_timeout;
adapter->rsi_host_intf = RSI_HOST_INTF_USB;
adapter->host_intf_ops = &usb_host_intf_ops;
rsi_init_event(&rsi_dev->rx_thread.event);
status = rsi_create_kthread(common, &rsi_dev->rx_thread,
rsi_usb_rx_thread, "RX-Thread");
if (status) {
rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__);
goto fail_thread;
}
#ifdef CONFIG_RSI_DEBUGFS
/* In USB, one less than the MAX_DEBUGFS_ENTRIES entries is required */
adapter->num_debugfs_entries = (MAX_DEBUGFS_ENTRIES - 1);
......@@ -620,15 +637,12 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);
return 0;
fail_thread:
kfree(rsi_dev->rx_cb[0].rx_buffer);
usb_free_urb(rsi_dev->rx_cb[0].rx_urb);
if (common->coex_mode > 1) {
kfree(rsi_dev->rx_cb[1].rx_buffer);
usb_free_urb(rsi_dev->rx_cb[1].rx_urb);
}
fail_tx:
kfree(common->rx_data_pkt);
fail_rx:
kfree(rsi_dev->tx_buffer);
fail_eps:
kfree(rsi_dev);
return status;
}
......
......@@ -29,44 +29,33 @@ void rsi_usb_rx_thread(struct rsi_common *common)
{
struct rsi_hw *adapter = common->priv;
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
struct rx_usb_ctrl_block *rx_cb;
int status, idx, num_rx_cb;
int status;
struct sk_buff *skb;
num_rx_cb = (adapter->priv->coex_mode > 1 ? 2 : 1);
do {
rsi_wait_event(&dev->rx_thread.event, EVENT_WAIT_FOREVER);
rsi_reset_event(&dev->rx_thread.event);
while (true) {
if (atomic_read(&dev->rx_thread.thread_done))
goto out;
for (idx = 0; idx < num_rx_cb; idx++) {
rx_cb = &dev->rx_cb[idx];
if (!rx_cb->pend)
continue;
mutex_lock(&common->rx_lock);
status = rsi_read_pkt(common, rx_cb->rx_buffer, 0);
skb = skb_dequeue(&dev->rx_q);
if (!skb)
break;
status = rsi_read_pkt(common, skb->data, 0);
if (status) {
rsi_dbg(ERR_ZONE, "%s: Failed To read data",
__func__);
mutex_unlock(&common->rx_lock);
break;
}
rx_cb->pend = 0;
mutex_unlock(&common->rx_lock);
if (adapter->rx_urb_submit(adapter, rx_cb->ep_num)) {
rsi_dbg(ERR_ZONE,
"%s: Failed in urb submission",
__func__);
return;
}
dev_kfree_skb(skb);
}
rsi_reset_event(&dev->rx_thread.event);
} while (1);
out:
rsi_dbg(INFO_ZONE, "%s: Terminated thread\n", __func__);
skb_queue_purge(&dev->rx_q);
complete_and_exit(&dev->rx_thread.completion, 0);
}
......@@ -114,6 +114,7 @@
#define FW_FLASH_OFFSET 0x820
#define LMAC_VER_OFFSET (FW_FLASH_OFFSET + 0x200)
#define MAX_DWORD_ALIGN_BYTES 64
struct bl_header {
__le32 flags;
......
......@@ -341,7 +341,6 @@ struct rsi_hw {
void *rsi_dev;
struct rsi_host_intf_ops *host_intf_ops;
int (*check_hw_queue_status)(struct rsi_hw *adapter, u8 q_num);
int (*rx_urb_submit)(struct rsi_hw *adapter, u8 ep_num);
int (*determine_event_timeout)(struct rsi_hw *adapter);
};
......
......@@ -42,12 +42,12 @@
struct rx_usb_ctrl_block {
u8 *data;
struct urb *rx_urb;
u8 *rx_buffer;
struct sk_buff *rx_skb;
u8 ep_num;
u8 pend;
};
struct rsi_91x_usbdev {
void *priv;
struct rsi_thread rx_thread;
u8 endpoint;
struct usb_device *usbdev;
......@@ -60,6 +60,7 @@ struct rsi_91x_usbdev {
u8 bulkout_endpoint_addr[MAX_BULK_EP];
u32 tx_blk_size;
u8 write_fail;
struct sk_buff_head rx_q;
};
static inline int rsi_usb_check_queue_status(struct rsi_hw *adapter, u8 q_num)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment