Commit a1a0db36 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

  This includes two branches for arm64 dt updates, both following up on
  earlier changes for the same platforms that are already merged:

  Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates

  Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT

  There are also a couple of bugfixes that trickled in since the start
  of the merge window:

   - The moxart_defconfig was not building the intended platform
   - CPU-hotplug was broken on ux500
   - Coresight was broken on Juno (never worked)"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: deconfig: fix the moxart defconfig
  ARM: ux500: resume the second core properly
  arm64: dts: juno: update definition for programmable replicator
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ...
parents 0a040b21 ca2dea43
...@@ -40,6 +40,8 @@ Board compatible values: ...@@ -40,6 +40,8 @@ Board compatible values:
- "hardkernel,odroid-c2" (Meson gxbb) - "hardkernel,odroid-c2" (Meson gxbb)
- "amlogic,p200" (Meson gxbb) - "amlogic,p200" (Meson gxbb)
- "amlogic,p201" (Meson gxbb) - "amlogic,p201" (Meson gxbb)
- "wetek,hub" (Meson gxbb)
- "wetek,play2" (Meson gxbb)
- "amlogic,p212" (Meson gxl s905x) - "amlogic,p212" (Meson gxl s905x)
- "amlogic,p230" (Meson gxl s905d) - "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d)
......
...@@ -332,6 +332,7 @@ virtio Virtual I/O Device Specification, developed by the OASIS consortium ...@@ -332,6 +332,7 @@ virtio Virtual I/O Device Specification, developed by the OASIS consortium
vivante Vivante Corporation vivante Vivante Corporation
voipac Voipac Technologies s.r.o. voipac Voipac Technologies s.r.o.
wd Western Digital Corp. wd Western Digital Corp.
wetek WeTek Electronics, limited.
wexler Wexler wexler Wexler
winbond Winbond Electronics corp. winbond Winbond Electronics corp.
wlf Wolfson Microelectronics wlf Wolfson Microelectronics
......
...@@ -18,9 +18,8 @@ CONFIG_EMBEDDED=y ...@@ -18,9 +18,8 @@ CONFIG_EMBEDDED=y
# CONFIG_LBDAF is not set # CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V4=y
# CONFIG_ARCH_MULTI_V7 is not set # CONFIG_ARCH_MULTI_V7 is not set
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_ARCH_MOXART=y CONFIG_ARCH_MOXART=y
CONFIG_MACH_UC7112LX=y CONFIG_MACH_UC7112LX=y
CONFIG_PREEMPT=y CONFIG_PREEMPT=y
...@@ -94,12 +93,10 @@ CONFIG_SERIAL_8250_EXTENDED=y ...@@ -94,12 +93,10 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set # CONFIG_HW_RANDOM is not set
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MOXART=y CONFIG_GPIO_MOXART=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y CONFIG_WATCHDOG_CORE=y
...@@ -107,10 +104,13 @@ CONFIG_WATCHDOG_NOWAYOUT=y ...@@ -107,10 +104,13 @@ CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_MOXART_WDT=y CONFIG_MOXART_WDT=y
# CONFIG_USB_SUPPORT is not set # CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y CONFIG_MMC=y
CONFIG_MMC_SDHCI_MOXART=y CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_MOXART=y
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y
......
...@@ -5,7 +5,4 @@ ...@@ -5,7 +5,4 @@
obj-y := pm.o obj-y := pm.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
CFLAGS_hotplug.o += -march=armv7-a
...@@ -31,8 +31,6 @@ ...@@ -31,8 +31,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include "setup.h"
#include "db8500-regs.h" #include "db8500-regs.h"
static int __init ux500_l2x0_unlock(void) static int __init ux500_l2x0_unlock(void)
......
/*
* Copyright (C) STMicroelectronics 2009
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
* Based on ARM realview platform
*
* Author: Sundar Iyer <sundar.iyer@stericsson.com>
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/smp_plat.h>
#include "setup.h"
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
void ux500_cpu_die(unsigned int cpu)
{
/* directly enter low power state, skipping secure registers */
for (;;) {
__asm__ __volatile__("dsb\n\t" "wfi\n\t"
: : : "memory");
if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
break;
}
}
}
...@@ -23,8 +23,6 @@ ...@@ -23,8 +23,6 @@
#include <asm/smp_plat.h> #include <asm/smp_plat.h>
#include <asm/smp_scu.h> #include <asm/smp_scu.h>
#include "setup.h"
#include "db8500-regs.h" #include "db8500-regs.h"
/* Magic triggers in backup RAM */ /* Magic triggers in backup RAM */
...@@ -90,6 +88,13 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) ...@@ -90,6 +88,13 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
return 0; return 0;
} }
#ifdef CONFIG_HOTPLUG_CPU
void ux500_cpu_die(unsigned int cpu)
{
wfi();
}
#endif
static const struct smp_operations ux500_smp_ops __initconst = { static const struct smp_operations ux500_smp_ops __initconst = {
.smp_prepare_cpus = ux500_smp_prepare_cpus, .smp_prepare_cpus = ux500_smp_prepare_cpus,
.smp_boot_secondary = ux500_boot_secondary, .smp_boot_secondary = ux500_boot_secondary,
......
/*
* Copyright (C) 2009 ST-Ericsson.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* These symbols are needed for board-specific files to call their
* own cpu-specific files
*/
#ifndef __ASM_ARCH_SETUP_H
#define __ASM_ARCH_SETUP_H
extern void ux500_cpu_die(unsigned int cpu);
#endif /* __ASM_ARCH_SETUP_H */
...@@ -5,12 +5,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb ...@@ -5,12 +5,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
always := $(dtb-y) always := $(dtb-y)
......
...@@ -83,6 +83,7 @@ cpu0: cpu@0 { ...@@ -83,6 +83,7 @@ cpu0: cpu@0 {
reg = <0x0 0x0>; reg = <0x0 0x0>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&l2>; next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
}; };
cpu1: cpu@1 { cpu1: cpu@1 {
...@@ -91,6 +92,7 @@ cpu1: cpu@1 { ...@@ -91,6 +92,7 @@ cpu1: cpu@1 {
reg = <0x0 0x1>; reg = <0x0 0x1>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&l2>; next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
}; };
cpu2: cpu@2 { cpu2: cpu@2 {
...@@ -99,6 +101,7 @@ cpu2: cpu@2 { ...@@ -99,6 +101,7 @@ cpu2: cpu@2 {
reg = <0x0 0x2>; reg = <0x0 0x2>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&l2>; next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
}; };
cpu3: cpu@3 { cpu3: cpu@3 {
...@@ -107,6 +110,7 @@ cpu3: cpu@3 { ...@@ -107,6 +110,7 @@ cpu3: cpu@3 {
reg = <0x0 0x3>; reg = <0x0 0x3>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&l2>; next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
}; };
l2: l2-cache0 { l2: l2-cache0 {
...@@ -171,6 +175,28 @@ bid: bid@46 { ...@@ -171,6 +175,28 @@ bid: bid@46 {
}; };
}; };
scpi {
compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
clock-output-names = "vcpu";
};
};
scpi_sensors: sensors {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
soc { soc {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <2>; #address-cells = <2>;
...@@ -229,6 +255,14 @@ pwm_cd: pwm@8650 { ...@@ -229,6 +255,14 @@ pwm_cd: pwm@8650 {
status = "disabled"; status = "disabled";
}; };
saradc: adc@8680 {
compatible = "amlogic,meson-saradc";
reg = <0x0 0x8680 0x0 0x34>;
#io-channel-cells = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
pwm_ef: pwm@86c0 { pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>; reg = <0x0 0x086c0 0x0 0x10>;
...@@ -282,6 +316,25 @@ gic: interrupt-controller@c4301000 { ...@@ -282,6 +316,25 @@ gic: interrupt-controller@c4301000 {
#address-cells = <0>; #address-cells = <0>;
}; };
sram: sram@c8000000 {
compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
aobus: aobus@c8100000 { aobus: aobus@c8100000 {
compatible = "simple-bus"; compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>; reg = <0x0 0xc8100000 0x0 0x100000>;
...@@ -297,6 +350,21 @@ uart_AO: serial@4c0 { ...@@ -297,6 +350,21 @@ uart_AO: serial@4c0 {
status = "disabled"; status = "disabled";
}; };
uart_AO_B: serial@4e0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004e0 0x0 0x14>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
pwm_AO_ab: pwm@550 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x00550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
ir: ir@580 { ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir"; compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>; reg = <0x0 0x00580 0x0 0x40>;
......
...@@ -45,10 +45,55 @@ ...@@ -45,10 +45,55 @@
/dts-v1/; /dts-v1/;
#include "meson-gxbb-p20x.dtsi" #include "meson-gxbb-p20x.dtsi"
#include <dt-bindings/input/input.h>
/ { / {
compatible = "amlogic,p200", "amlogic,meson-gxbb"; compatible = "amlogic,p200", "amlogic,meson-gxbb";
model = "Amlogic Meson GXBB P200 Development Board"; model = "Amlogic Meson GXBB P200 Development Board";
avdd18_usb_adc: regulator-avdd18_usb_adc {
compatible = "regulator-fixed";
regulator-name = "AVDD18_USB_ADC";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
adc_keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
button-home {
label = "Home";
linux,code = <KEY_HOME>;
press-threshold-microvolt = <900000>; /* 50% */
};
button-esc {
label = "Esc";
linux,code = <KEY_ESC>;
press-threshold-microvolt = <684000>; /* 38% */
};
button-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <468000>; /* 26% */
};
button-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <252000>; /* 14% */
};
button-menu {
label = "Menu";
linux,code = <KEY_MENU>;
press-threshold-microvolt = <0>; /* 0% */
};
};
}; };
&i2c_B { &i2c_B {
...@@ -56,3 +101,8 @@ &i2c_B { ...@@ -56,3 +101,8 @@ &i2c_B {
pinctrl-0 = <&i2c_b_pins>; pinctrl-0 = <&i2c_b_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
}; };
&saradc {
status = "okay";
vref-supply = <&avdd18_usb_adc>;
};
...@@ -53,6 +53,17 @@ chosen { ...@@ -53,6 +53,17 @@ chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
leds {
compatible = "gpio-leds";
blue {
label = "vega-s95:blue:on";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
};
};
usb_vbus: regulator-usb0-vbus { usb_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
......
/*
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
/ {
compatible = "wetek,hub", "amlogic,meson-gxbb";
model = "WeTek Hub";
leds {
compatible = "gpio-leds";
system {
label = "wetek-play:system-status";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
};
};
cvbs-connector {
status = "disabled";
};
};
/*
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "wetek,play2", "amlogic,meson-gxbb";
model = "WeTek Play 2";
leds {
compatible = "gpio-leds";
system {
label = "wetek-play:system-status";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
};
wifi {
label = "wetek-play:wifi-status";
gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
ethernet {
label = "wetek-play:ethernet-status";
gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
};
};
};
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
pinctrl-names = "default";
};
...@@ -50,28 +50,6 @@ ...@@ -50,28 +50,6 @@
/ { / {
compatible = "amlogic,meson-gxbb"; compatible = "amlogic,meson-gxbb";
scpi {
compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
clock-output-names = "vcpu";
};
};
scpi_sensors: sensors {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
soc { soc {
usb0_phy: phy@c0000000 { usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy"; compatible = "amlogic,meson-gxbb-usb2-phy";
...@@ -93,25 +71,6 @@ usb1_phy: phy@c0000020 { ...@@ -93,25 +71,6 @@ usb1_phy: phy@c0000020 {
status = "disabled"; status = "disabled";
}; };
sram: sram@c8000000 {
compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
usb0: usb@c9000000 { usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>; reg = <0x0 0xc9000000 0x0 0x40000>;
...@@ -138,22 +97,6 @@ usb1: usb@c9100000 { ...@@ -138,22 +97,6 @@ usb1: usb@c9100000 {
}; };
}; };
&cpu0 {
clocks = <&scpi_dvfs 0>;
};
&cpu1 {
clocks = <&scpi_dvfs 0>;
};
&cpu2 {
clocks = <&scpi_dvfs 0>;
};
&cpu3 {
clocks = <&scpi_dvfs 0>;
};
&cbus { &cbus {
spifc: spi@8c80 { spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc"; compatible = "amlogic,meson-gxbb-spifc";
...@@ -195,6 +138,29 @@ mux { ...@@ -195,6 +138,29 @@ mux {
}; };
}; };
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
};
};
remote_input_ao_pins: remote_input_ao { remote_input_ao_pins: remote_input_ao {
mux { mux {
groups = "remote_input_ao"; groups = "remote_input_ao";
...@@ -340,6 +306,14 @@ mux { ...@@ -340,6 +306,14 @@ mux {
}; };
}; };
uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
};
};
uart_b_pins: uart_b { uart_b_pins: uart_b {
mux { mux {
groups = "uart_tx_b", groups = "uart_tx_b",
...@@ -348,6 +322,14 @@ mux { ...@@ -348,6 +322,14 @@ mux {
}; };
}; };
uart_b_cts_rts_pins: uart_b_cts_rts {
mux {
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
};
};
uart_c_pins: uart_c { uart_c_pins: uart_c {
mux { mux {
groups = "uart_tx_c", groups = "uart_tx_c",
...@@ -356,6 +338,14 @@ mux { ...@@ -356,6 +338,14 @@ mux {
}; };
}; };
uart_c_cts_rts_pins: uart_c_cts_rts {
mux {
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a { i2c_a_pins: i2c_a {
mux { mux {
groups = "i2c_sck_a", groups = "i2c_sck_a",
...@@ -463,6 +453,20 @@ mux { ...@@ -463,6 +453,20 @@ mux {
function = "pwm_f_y"; function = "pwm_f_y";
}; };
}; };
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
};
};
hdmi_i2c_pins: hdmi_i2c {
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
};
};
}; };
}; };
...@@ -486,6 +490,16 @@ &i2c_C { ...@@ -486,6 +490,16 @@ &i2c_C {
clocks = <&clkc CLKID_I2C>; clocks = <&clkc CLKID_I2C>;
}; };
&saradc {
compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SANA>,
<&clkc CLKID_SAR_ADC_CLK>,
<&clkc CLKID_SAR_ADC_SEL>;
clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
};
&sd_emmc_a { &sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>, clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>, <&xtal>,
......
...@@ -88,12 +88,42 @@ mux { ...@@ -88,12 +88,42 @@ mux {
}; };
}; };
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
};
};
remote_input_ao_pins: remote_input_ao { remote_input_ao_pins: remote_input_ao {
mux { mux {
groups = "remote_input_ao"; groups = "remote_input_ao";
function = "remote_input_ao"; function = "remote_input_ao";
}; };
}; };
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
}; };
}; };
...@@ -163,6 +193,14 @@ mux { ...@@ -163,6 +193,14 @@ mux {
}; };
}; };
uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
};
};
uart_b_pins: uart_b { uart_b_pins: uart_b {
mux { mux {
groups = "uart_tx_b", groups = "uart_tx_b",
...@@ -171,6 +209,14 @@ mux { ...@@ -171,6 +209,14 @@ mux {
}; };
}; };
uart_b_cts_rts_pins: uart_b_cts_rts {
mux {
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
};
};
uart_c_pins: uart_c { uart_c_pins: uart_c {
mux { mux {
groups = "uart_tx_c", groups = "uart_tx_c",
...@@ -179,6 +225,14 @@ mux { ...@@ -179,6 +225,14 @@ mux {
}; };
}; };
uart_c_cts_rts_pins: uart_c_cts_rts {
mux {
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a { i2c_a_pins: i2c_a {
mux { mux {
groups = "i2c_sck_a", groups = "i2c_sck_a",
...@@ -229,6 +283,20 @@ mux { ...@@ -229,6 +283,20 @@ mux {
function = "pwm_e"; function = "pwm_e";
}; };
}; };
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
};
};
hdmi_i2c_pins: hdmi_i2c {
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
};
};
}; };
eth-phy-mux { eth-phy-mux {
...@@ -279,6 +347,16 @@ &i2c_C { ...@@ -279,6 +347,16 @@ &i2c_C {
clocks = <&clkc CLKID_I2C>; clocks = <&clkc CLKID_I2C>;
}; };
&saradc {
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SANA>,
<&clkc CLKID_SAR_ADC_CLK>,
<&clkc CLKID_SAR_ADC_SEL>;
clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
};
&sd_emmc_a { &sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>, clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>, <&xtal>,
......
...@@ -85,6 +85,7 @@ cpu4: cpu@100 { ...@@ -85,6 +85,7 @@ cpu4: cpu@100 {
reg = <0x0 0x100>; reg = <0x0 0x100>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&l2>; next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
}; };
cpu5: cpu@101 { cpu5: cpu@101 {
...@@ -93,6 +94,7 @@ cpu5: cpu@101 { ...@@ -93,6 +94,7 @@ cpu5: cpu@101 {
reg = <0x0 0x101>; reg = <0x0 0x101>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&l2>; next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
}; };
cpu6: cpu@102 { cpu6: cpu@102 {
...@@ -101,6 +103,7 @@ cpu6: cpu@102 { ...@@ -101,6 +103,7 @@ cpu6: cpu@102 {
reg = <0x0 0x102>; reg = <0x0 0x102>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&l2>; next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
}; };
cpu7: cpu@103 { cpu7: cpu@103 {
...@@ -109,10 +112,21 @@ cpu7: cpu@103 { ...@@ -109,10 +112,21 @@ cpu7: cpu@103 {
reg = <0x0 0x103>; reg = <0x0 0x103>;
enable-method = "psci"; enable-method = "psci";
next-level-cache = <&l2>; next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
}; };
}; };
}; };
&saradc {
compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
};
&scpi_dvfs {
clock-indices = <0 1>;
clock-output-names = "vbig", "vlittle";
};
&vpu { &vpu {
compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
}; };
...@@ -372,12 +372,13 @@ cluster1_etm3_out_port: endpoint { ...@@ -372,12 +372,13 @@ cluster1_etm3_out_port: endpoint {
}; };
}; };
coresight-replicator { replicator@20120000 {
/* compatible = "qcom,coresight-replicator1x", "arm,primecell";
* Non-configurable replicators don't show up on the reg = <0 0x20120000 0 0x1000>;
* AMBA bus. As such no need to add "arm,primecell".
*/ clocks = <&soc_smc50mhz>;
compatible = "arm,coresight-replicator"; clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
ports { ports {
#address-cells = <1>; #address-cells = <1>;
......
...@@ -217,18 +217,6 @@ &cmu_aud { ...@@ -217,18 +217,6 @@ &cmu_aud {
assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
}; };
&cmu_disp {
assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<0>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
assigned-clock-rates = <0>, <400000000>;
};
&cmu_fsys { &cmu_fsys {
assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
<&cmu_top CLK_MOUT_SCLK_USBHOST30>, <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
......
...@@ -18,6 +18,40 @@ / { ...@@ -18,6 +18,40 @@ / {
compatible = "samsung,tm2", "samsung,exynos5433"; compatible = "samsung,tm2", "samsung,exynos5433";
}; };
&cmu_disp {
/*
* TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
* clocks properties for DISP CMU for each board to keep them together
* for easier review and maintenance.
*/
assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
<&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
<&cmu_disp CLK_MOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
assigned-clock-parents = <0>, <0>,
<&cmu_mif CLK_ACLK_DISP_333>,
<&cmu_mif CLK_SCLK_DSIM0_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
<&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
assigned-clock-rates = <250000000>, <400000000>;
};
&hsi2c_9 { &hsi2c_9 {
status = "okay"; status = "okay";
......
...@@ -18,6 +18,40 @@ / { ...@@ -18,6 +18,40 @@ / {
compatible = "samsung,tm2e", "samsung,exynos5433"; compatible = "samsung,tm2e", "samsung,exynos5433";
}; };
&cmu_disp {
/*
* TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
* clocks properties for DISP CMU for each board to keep them together
* for easier review and maintenance.
*/
assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
<&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
<&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
<&cmu_disp CLK_MOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
assigned-clock-parents = <0>, <0>,
<&cmu_mif CLK_ACLK_DISP_333>,
<&cmu_mif CLK_SCLK_DSIM0_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
<&cmu_disp CLK_FOUT_DISP_PLL>,
<&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
<&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
assigned-clock-rates = <278000000>, <400000000>;
};
&ldo31_reg { &ldo31_reg {
regulator-name = "TSP_VDD_1.8V_AP"; regulator-name = "TSP_VDD_1.8V_AP";
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
......
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include "exynos7.dtsi" #include "exynos7.dtsi"
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/samsung,s2mps11.h> #include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/gpio/gpio.h>
/ { / {
model = "Samsung Exynos7 Espresso board based on EXYNOS7"; model = "Samsung Exynos7 Espresso board based on EXYNOS7";
...@@ -32,6 +33,29 @@ memory@40000000 { ...@@ -32,6 +33,29 @@ memory@40000000 {
device_type = "memory"; device_type = "memory";
reg = <0x0 0x40000000 0x0 0xC0000000>; reg = <0x0 0x40000000 0x0 0xC0000000>;
}; };
usb30_vbus_reg: regulator-usb30 {
compatible = "regulator-fixed";
regulator-name = "VBUS_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb30_vbus_en>;
enable-active-high;
};
usb3drd_boost_5v: regulator-usb3drd-boost {
compatible = "regulator-fixed";
regulator-name = "VUSB_VBUS_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3drd_boost_en>;
enable-active-high;
};
}; };
&fin_pll { &fin_pll {
...@@ -328,8 +352,8 @@ buck10_reg: BUCK10 { ...@@ -328,8 +352,8 @@ buck10_reg: BUCK10 {
&pinctrl_alive { &pinctrl_alive {
pmic_irq: pmic-irq { pmic_irq: pmic-irq {
samsung,pins = "gpa0-2"; samsung,pins = "gpa0-2";
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <3>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
}; };
}; };
...@@ -365,3 +389,24 @@ &mmc_2 { ...@@ -365,3 +389,24 @@ &mmc_2 {
vqmmc-supply = <&ldo2_reg>; vqmmc-supply = <&ldo2_reg>;
disable-wp; disable-wp;
}; };
&pinctrl_bus1 {
usb30_vbus_en: usb30-vbus-en {
samsung,pins = "gph1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
usb3drd_boost_en: usb3drd-boost-en {
samsung,pins = "gpf4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
&usbdrd_phy {
vbus-supply = <&usb30_vbus_reg>;
vbus-boost-supply = <&usb3drd_boost_5v>;
};
...@@ -12,6 +12,8 @@ ...@@ -12,6 +12,8 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_alive { &pinctrl_alive {
gpa0: gpa0 { gpa0: gpa0 {
gpio-controller; gpio-controller;
...@@ -187,163 +189,163 @@ gpg3: gpg3 { ...@@ -187,163 +189,163 @@ gpg3: gpg3 {
hs_i2c10_bus: hs-i2c10-bus { hs_i2c10_bus: hs-i2c10-bus {
samsung,pins = "gpb0-1", "gpb0-0"; samsung,pins = "gpb0-1", "gpb0-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
hs_i2c11_bus: hs-i2c11-bus { hs_i2c11_bus: hs-i2c11-bus {
samsung,pins = "gpb0-3", "gpb0-2"; samsung,pins = "gpb0-3", "gpb0-2";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
hs_i2c2_bus: hs-i2c2-bus { hs_i2c2_bus: hs-i2c2-bus {
samsung,pins = "gpd0-3", "gpd0-2"; samsung,pins = "gpd0-3", "gpd0-2";
samsung,pin-function = <3>; samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
uart0_data: uart0-data { uart0_data: uart0-data {
samsung,pins = "gpd0-0", "gpd0-1"; samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
uart0_fctl: uart0-fctl { uart0_fctl: uart0-fctl {
samsung,pins = "gpd0-2", "gpd0-3"; samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
uart2_data: uart2-data { uart2_data: uart2-data {
samsung,pins = "gpd1-4", "gpd1-5"; samsung,pins = "gpd1-4", "gpd1-5";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
hs_i2c3_bus: hs-i2c3-bus { hs_i2c3_bus: hs-i2c3-bus {
samsung,pins = "gpd1-3", "gpd1-2"; samsung,pins = "gpd1-3", "gpd1-2";
samsung,pin-function = <3>; samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
uart1_data: uart1-data { uart1_data: uart1-data {
samsung,pins = "gpd1-0", "gpd1-1"; samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
uart1_fctl: uart1-fctl { uart1_fctl: uart1-fctl {
samsung,pins = "gpd1-2", "gpd1-3"; samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
hs_i2c0_bus: hs-i2c0-bus { hs_i2c0_bus: hs-i2c0-bus {
samsung,pins = "gpd2-1", "gpd2-0"; samsung,pins = "gpd2-1", "gpd2-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
hs_i2c1_bus: hs-i2c1-bus { hs_i2c1_bus: hs-i2c1-bus {
samsung,pins = "gpd2-3", "gpd2-2"; samsung,pins = "gpd2-3", "gpd2-2";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
hs_i2c9_bus: hs-i2c9-bus { hs_i2c9_bus: hs-i2c9-bus {
samsung,pins = "gpd2-7", "gpd2-6"; samsung,pins = "gpd2-7", "gpd2-6";
samsung,pin-function = <3>; samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
pwm0_out: pwm0-out { pwm0_out: pwm0-out {
samsung,pins = "gpd2-4"; samsung,pins = "gpd2-4";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
pwm1_out: pwm1-out { pwm1_out: pwm1-out {
samsung,pins = "gpd2-5"; samsung,pins = "gpd2-5";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
pwm2_out: pwm2-out { pwm2_out: pwm2-out {
samsung,pins = "gpd2-6"; samsung,pins = "gpd2-6";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
pwm3_out: pwm3-out { pwm3_out: pwm3-out {
samsung,pins = "gpd2-7"; samsung,pins = "gpd2-7";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
hs_i2c8_bus: hs-i2c8-bus { hs_i2c8_bus: hs-i2c8-bus {
samsung,pins = "gpd5-3", "gpd5-2"; samsung,pins = "gpd5-3", "gpd5-2";
samsung,pin-function = <3>; samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
uart3_data: uart3-data { uart3_data: uart3-data {
samsung,pins = "gpd5-0", "gpd5-1"; samsung,pins = "gpd5-0", "gpd5-1";
samsung,pin-function = <3>; samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
spi2_bus: spi2-bus { spi2_bus: spi2-bus {
samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3"; samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
spi1_bus: spi1-bus { spi1_bus: spi1-bus {
samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5"; samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
spi0_bus: spi0-bus { spi0_bus: spi0-bus {
samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1"; samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
hs_i2c4_bus: hs-i2c4-bus { hs_i2c4_bus: hs-i2c4-bus {
samsung,pins = "gpg3-1", "gpg3-0"; samsung,pins = "gpg3-1", "gpg3-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
hs_i2c5_bus: hs-i2c5-bus { hs_i2c5_bus: hs-i2c5-bus {
samsung,pins = "gpg3-3", "gpg3-2"; samsung,pins = "gpg3-3", "gpg3-2";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
}; };
...@@ -358,9 +360,9 @@ gpj0: gpj0 { ...@@ -358,9 +360,9 @@ gpj0: gpj0 {
hs_i2c6_bus: hs-i2c6-bus { hs_i2c6_bus: hs-i2c6-bus {
samsung,pins = "gpj0-1", "gpj0-0"; samsung,pins = "gpj0-1", "gpj0-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
}; };
...@@ -375,9 +377,9 @@ gpj1: gpj1 { ...@@ -375,9 +377,9 @@ gpj1: gpj1 {
hs_i2c7_bus: hs-i2c7-bus { hs_i2c7_bus: hs-i2c7-bus {
samsung,pins = "gpj1-1", "gpj1-0"; samsung,pins = "gpj1-1", "gpj1-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
}; };
...@@ -392,9 +394,9 @@ gpg4: gpg4 { ...@@ -392,9 +394,9 @@ gpg4: gpg4 {
spi3_bus: spi3-bus { spi3_bus: spi3-bus {
samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3"; samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
}; };
...@@ -409,9 +411,9 @@ gpv7: gpv7 { ...@@ -409,9 +411,9 @@ gpv7: gpv7 {
spi4_bus: spi4-bus { spi4_bus: spi4-bus {
samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3"; samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
}; };
...@@ -426,37 +428,37 @@ gpr4: gpr4 { ...@@ -426,37 +428,37 @@ gpr4: gpr4 {
sd2_clk: sd2-clk { sd2_clk: sd2-clk {
samsung,pins = "gpr4-0"; samsung,pins = "gpr4-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <3>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
}; };
sd2_cmd: sd2-cmd { sd2_cmd: sd2-cmd {
samsung,pins = "gpr4-1"; samsung,pins = "gpr4-1";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <3>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
}; };
sd2_cd: sd2-cd { sd2_cd: sd2-cd {
samsung,pins = "gpr4-2"; samsung,pins = "gpr4-2";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <3>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
}; };
sd2_bus1: sd2-bus-width1 { sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpr4-3"; samsung,pins = "gpr4-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <3>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
}; };
sd2_bus4: sd2-bus-width4 { sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <3>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
}; };
}; };
...@@ -495,107 +497,107 @@ gpr3: gpr3 { ...@@ -495,107 +497,107 @@ gpr3: gpr3 {
sd0_clk: sd0-clk { sd0_clk: sd0-clk {
samsung,pins = "gpr0-0"; samsung,pins = "gpr0-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <4>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
}; };
sd0_cmd: sd0-cmd { sd0_cmd: sd0-cmd {
samsung,pins = "gpr0-1"; samsung,pins = "gpr0-1";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <4>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
}; };
sd0_ds: sd0-ds { sd0_ds: sd0-ds {
samsung,pins = "gpr0-2"; samsung,pins = "gpr0-2";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <1>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <4>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
}; };
sd0_qrdy: sd0-qrdy { sd0_qrdy: sd0-qrdy {
samsung,pins = "gpr0-3"; samsung,pins = "gpr0-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <1>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <4>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
}; };
sd0_bus1: sd0-bus-width1 { sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpr1-0"; samsung,pins = "gpr1-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <4>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
}; };
sd0_bus4: sd0-bus-width4 { sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <4>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
}; };
sd0_bus8: sd0-bus-width8 { sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <4>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
}; };
sd1_clk: sd1-clk { sd1_clk: sd1-clk {
samsung,pins = "gpr2-0"; samsung,pins = "gpr2-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <2>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
}; };
sd1_cmd: sd1-cmd { sd1_cmd: sd1-cmd {
samsung,pins = "gpr2-1"; samsung,pins = "gpr2-1";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <2>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
}; };
sd1_ds: sd1-ds { sd1_ds: sd1-ds {
samsung,pins = "gpr2-2"; samsung,pins = "gpr2-2";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <1>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <6>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
}; };
sd1_qrdy: sd1-qrdy { sd1_qrdy: sd1-qrdy {
samsung,pins = "gpr2-3"; samsung,pins = "gpr2-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <1>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <6>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
}; };
sd1_int: sd1-int { sd1_int: sd1-int {
samsung,pins = "gpr2-4"; samsung,pins = "gpr2-4";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <1>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <6>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
}; };
sd1_bus1: sd1-bus-width1 { sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpr3-0"; samsung,pins = "gpr3-0";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <2>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
}; };
sd1_bus4: sd1-bus-width4 { sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <2>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
}; };
sd1_bus8: sd1-bus-width8 { sd1_bus8: sd1-bus-width8 {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <2>; samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
}; };
}; };
...@@ -682,22 +684,22 @@ gpv6: gpv6 { ...@@ -682,22 +684,22 @@ gpv6: gpv6 {
spi5_bus: spi5-bus { spi5_bus: spi5-bus {
samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3"; samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
ufs_refclk_out: ufs-refclk-out { ufs_refclk_out: ufs-refclk-out {
samsung,pins = "gpg2-4"; samsung,pins = "gpg2-4";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <0>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <2>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
}; };
ufs_rst_n: ufs-rst-n { ufs_rst_n: ufs-rst-n {
samsung,pins = "gph1-5"; samsung,pins = "gph1-5";
samsung,pin-function = <2>; samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <0>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
}; };
}; };
...@@ -603,6 +603,40 @@ atlas_thermal: cluster0-thermal { ...@@ -603,6 +603,40 @@ atlas_thermal: cluster0-thermal {
#include "exynos7-trip-points.dtsi" #include "exynos7-trip-points.dtsi"
}; };
}; };
usbdrd_phy: phy@15500000 {
compatible = "samsung,exynos7-usbdrd-phy";
reg = <0x15500000 0x100>;
clocks = <&clock_fsys0 ACLK_USBDRD300>,
<&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
<&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
<&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
<&clock_fsys0 SCLK_USBDRD300_REFCLK>;
clock-names = "phy", "ref", "phy_pipe",
"phy_utmi", "itp";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <1>;
};
usbdrd3 {
compatible = "samsung,exynos7-dwusb3";
clocks = <&clock_fsys0 ACLK_USBDRD300>,
<&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
<&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
clock-names = "usbdrd30", "usbdrd30_susp_clk",
"usbdrd30_axius_clk";
#address-cells = <1>;
#size-cells = <1>;
ranges;
dwc3@15400000 {
compatible = "snps,dwc3";
reg = <0x15400000 0x10000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
};
}; };
}; };
......
...@@ -564,6 +564,46 @@ static struct clk_gate gxbb_clk81 = { ...@@ -564,6 +564,46 @@ static struct clk_gate gxbb_clk81 = {
}, },
}; };
static struct clk_mux gxbb_sar_adc_clk_sel = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.mask = 0x3,
.shift = 9,
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_sel",
.ops = &clk_mux_ops,
/* NOTE: The datasheet doesn't list the parents for bit 10 */
.parent_names = (const char *[]){ "xtal", "clk81", },
.num_parents = 2,
},
};
static struct clk_divider gxbb_sar_adc_clk_div = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.shift = 0,
.width = 8,
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_div",
.ops = &clk_divider_ops,
.parent_names = (const char *[]){ "sar_adc_clk_sel" },
.num_parents = 1,
},
};
static struct clk_gate gxbb_sar_adc_clk = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.bit_idx = 8,
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk",
.ops = &clk_gate_ops,
.parent_names = (const char *[]){ "sar_adc_clk_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
/* Everything Else (EE) domain gates */ /* Everything Else (EE) domain gates */
static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0); static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1); static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
...@@ -754,6 +794,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = { ...@@ -754,6 +794,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
[CLKID_SD_EMMC_A] = &gxbb_emmc_a.hw, [CLKID_SD_EMMC_A] = &gxbb_emmc_a.hw,
[CLKID_SD_EMMC_B] = &gxbb_emmc_b.hw, [CLKID_SD_EMMC_B] = &gxbb_emmc_b.hw,
[CLKID_SD_EMMC_C] = &gxbb_emmc_c.hw, [CLKID_SD_EMMC_C] = &gxbb_emmc_c.hw,
[CLKID_SAR_ADC_CLK] = &gxbb_sar_adc_clk.hw,
[CLKID_SAR_ADC_SEL] = &gxbb_sar_adc_clk_sel.hw,
[CLKID_SAR_ADC_DIV] = &gxbb_sar_adc_clk_div.hw,
}, },
.num = NR_CLKS, .num = NR_CLKS,
}; };
...@@ -856,6 +899,7 @@ static struct clk_gate *gxbb_clk_gates[] = { ...@@ -856,6 +899,7 @@ static struct clk_gate *gxbb_clk_gates[] = {
&gxbb_emmc_a, &gxbb_emmc_a,
&gxbb_emmc_b, &gxbb_emmc_b,
&gxbb_emmc_c, &gxbb_emmc_c,
&gxbb_sar_adc_clk,
}; };
static int gxbb_clkc_probe(struct platform_device *pdev) static int gxbb_clkc_probe(struct platform_device *pdev)
...@@ -888,6 +932,10 @@ static int gxbb_clkc_probe(struct platform_device *pdev) ...@@ -888,6 +932,10 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg; gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg; gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
/* Populate the base address for the SAR ADC clks */
gxbb_sar_adc_clk_sel.reg = clk_base + (u64)gxbb_sar_adc_clk_sel.reg;
gxbb_sar_adc_clk_div.reg = clk_base + (u64)gxbb_sar_adc_clk_div.reg;
/* Populate base address for gates */ /* Populate base address for gates */
for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++) for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
gxbb_clk_gates[i]->reg = clk_base + gxbb_clk_gates[i]->reg = clk_base +
......
...@@ -191,7 +191,7 @@ ...@@ -191,7 +191,7 @@
#define CLKID_PERIPHS 20 #define CLKID_PERIPHS 20
#define CLKID_SPICC 21 #define CLKID_SPICC 21
/* CLKID_I2C */ /* CLKID_I2C */
#define CLKID_SAR_ADC 23 /* #define CLKID_SAR_ADC */
#define CLKID_SMART_CARD 24 #define CLKID_SMART_CARD 24
#define CLKID_RNG0 25 #define CLKID_RNG0 25
#define CLKID_UART0 26 #define CLKID_UART0 26
...@@ -204,7 +204,7 @@ ...@@ -204,7 +204,7 @@
#define CLKID_ASSIST_MISC 33 #define CLKID_ASSIST_MISC 33
/* CLKID_SPI */ /* CLKID_SPI */
#define CLKID_I2S_SPDIF 35 #define CLKID_I2S_SPDIF 35
#define CLKID_ETH 36 /* CLKID_ETH */
#define CLKID_DEMUX 37 #define CLKID_DEMUX 37
#define CLKID_AIU_GLUE 38 #define CLKID_AIU_GLUE 38
#define CLKID_IEC958 39 #define CLKID_IEC958 39
...@@ -231,13 +231,13 @@ ...@@ -231,13 +231,13 @@
#define CLKID_AHB_DATA_BUS 60 #define CLKID_AHB_DATA_BUS 60
#define CLKID_AHB_CTRL_BUS 61 #define CLKID_AHB_CTRL_BUS 61
#define CLKID_HDMI_INTR_SYNC 62 #define CLKID_HDMI_INTR_SYNC 62
#define CLKID_HDMI_PCLK 63 /* CLKID_HDMI_PCLK */
/* CLKID_USB1_DDR_BRIDGE */ /* CLKID_USB1_DDR_BRIDGE */
/* CLKID_USB0_DDR_BRIDGE */ /* CLKID_USB0_DDR_BRIDGE */
#define CLKID_MMC_PCLK 66 #define CLKID_MMC_PCLK 66
#define CLKID_DVIN 67 #define CLKID_DVIN 67
#define CLKID_UART2 68 #define CLKID_UART2 68
#define CLKID_SANA 69 /* #define CLKID_SANA */
#define CLKID_VPU_INTR 70 #define CLKID_VPU_INTR 70
#define CLKID_SEC_AHB_AHB3_BRIDGE 71 #define CLKID_SEC_AHB_AHB3_BRIDGE 71
#define CLKID_CLK81_A53 72 #define CLKID_CLK81_A53 72
...@@ -245,7 +245,7 @@ ...@@ -245,7 +245,7 @@
#define CLKID_VCLK2_VENCI1 74 #define CLKID_VCLK2_VENCI1 74
#define CLKID_VCLK2_VENCP0 75 #define CLKID_VCLK2_VENCP0 75
#define CLKID_VCLK2_VENCP1 76 #define CLKID_VCLK2_VENCP1 76
#define CLKID_GCLK_VENCI_INT0 77 /* CLKID_GCLK_VENCI_INT0 */
#define CLKID_GCLK_VENCI_INT 78 #define CLKID_GCLK_VENCI_INT 78
#define CLKID_DAC_CLK 79 #define CLKID_DAC_CLK 79
#define CLKID_AOCLK_GATE 80 #define CLKID_AOCLK_GATE 80
...@@ -265,8 +265,11 @@ ...@@ -265,8 +265,11 @@
/* CLKID_SD_EMMC_A */ /* CLKID_SD_EMMC_A */
/* CLKID_SD_EMMC_B */ /* CLKID_SD_EMMC_B */
/* CLKID_SD_EMMC_C */ /* CLKID_SD_EMMC_C */
/* CLKID_SAR_ADC_CLK */
/* CLKID_SAR_ADC_SEL */
#define CLKID_SAR_ADC_DIV 99
#define NR_CLKS 97 #define NR_CLKS 100
/* include the CLKIDs that have been made part of the stable DT binding */ /* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/gxbb-clkc.h> #include <dt-bindings/clock/gxbb-clkc.h>
......
...@@ -14,15 +14,21 @@ ...@@ -14,15 +14,21 @@
#define CLKID_MPLL2 15 #define CLKID_MPLL2 15
#define CLKID_SPI 34 #define CLKID_SPI 34
#define CLKID_I2C 22 #define CLKID_I2C 22
#define CLKID_SAR_ADC 23
#define CLKID_ETH 36 #define CLKID_ETH 36
#define CLKID_USB0 50 #define CLKID_USB0 50
#define CLKID_USB1 51 #define CLKID_USB1 51
#define CLKID_USB 55 #define CLKID_USB 55
#define CLKID_HDMI_PCLK 63
#define CLKID_USB1_DDR_BRIDGE 64 #define CLKID_USB1_DDR_BRIDGE 64
#define CLKID_USB0_DDR_BRIDGE 65 #define CLKID_USB0_DDR_BRIDGE 65
#define CLKID_SANA 69
#define CLKID_GCLK_VENCI_INT0 77
#define CLKID_AO_I2C 93 #define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94 #define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95 #define CLKID_SD_EMMC_B 95
#define CLKID_SD_EMMC_C 96 #define CLKID_SD_EMMC_C 96
#define CLKID_SAR_ADC_CLK 97
#define CLKID_SAR_ADC_SEL 98
#endif /* __GXBB_CLKC_H */ #endif /* __GXBB_CLKC_H */
...@@ -68,4 +68,12 @@ ...@@ -68,4 +68,12 @@
#define EXYNOS_PIN_FUNC_6 6 #define EXYNOS_PIN_FUNC_6 6
#define EXYNOS_PIN_FUNC_F 0xf #define EXYNOS_PIN_FUNC_F 0xf
/* Drive strengths for Exynos7 FSYS1 block */
#define EXYNOS7_FSYS1_PIN_DRV_LV1 0
#define EXYNOS7_FSYS1_PIN_DRV_LV2 4
#define EXYNOS7_FSYS1_PIN_DRV_LV3 2
#define EXYNOS7_FSYS1_PIN_DRV_LV4 6
#define EXYNOS7_FSYS1_PIN_DRV_LV5 1
#define EXYNOS7_FSYS1_PIN_DRV_LV6 5
#endif /* __DT_BINDINGS_PINCTRL_SAMSUNG_H__ */ #endif /* __DT_BINDINGS_PINCTRL_SAMSUNG_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment