Commit a2388a49 authored by Nicolin Chen's avatar Nicolin Chen Committed by Mark Brown

ASoC: fsl: Add S/PDIF CPU DAI driver

This patch implements a device-tree-only CPU DAI driver for Freescale
S/PDIF controller that supports stereo playback and record feature.
Signed-off-by: default avatarNicolin Chen <b42378@freescale.com>
Acked-by: default avatarStephen Warren <swarren@nvidia.com>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 0783e648
Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
The Freescale S/PDIF audio block is a stereo transceiver that allows the
processor to receive and transmit digital audio via an coaxial cable or
a fibre cable.
Required properties:
- compatible : Compatible list, must contain "fsl,imx35-spdif".
- reg : Offset and length of the register set for the device.
- interrupts : Contains the spdif interrupt.
- dmas : Generic dma devicetree binding as described in
Documentation/devicetree/bindings/dma/dma.txt.
- dma-names : Two dmas have to be defined, "tx" and "rx".
- clocks : Contains an entry for each entry in clock-names.
- clock-names : Includes the following entries:
"core" The core clock of spdif controller
"rxtx<0-7>" Clock source list for tx and rx clock.
This clock list should be identical to
the source list connecting to the spdif
clock mux in "SPDIF Transceiver Clock
Diagram" of SoC reference manual. It
can also be referred to TxClk_Source
bit of register SPDIF_STC.
Example:
spdif: spdif@02004000 {
compatible = "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <0 52 0x04>;
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
clocks = <&clks 197>, <&clks 3>,
<&clks 197>, <&clks 107>,
<&clks 0>, <&clks 118>,
<&clks 62>, <&clks 139>,
<&clks 0>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
"rxtx7";
status = "okay";
};
config SND_SOC_FSL_SSI config SND_SOC_FSL_SSI
tristate tristate
config SND_SOC_FSL_SPDIF
tristate
config SND_SOC_FSL_UTILS config SND_SOC_FSL_UTILS
tristate tristate
......
...@@ -12,9 +12,11 @@ obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o ...@@ -12,9 +12,11 @@ obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o
# Freescale PowerPC SSI/DMA Platform Support # Freescale PowerPC SSI/DMA Platform Support
snd-soc-fsl-ssi-objs := fsl_ssi.o snd-soc-fsl-ssi-objs := fsl_ssi.o
snd-soc-fsl-spdif-objs := fsl_spdif.o
snd-soc-fsl-utils-objs := fsl_utils.o snd-soc-fsl-utils-objs := fsl_utils.o
snd-soc-fsl-dma-objs := fsl_dma.o snd-soc-fsl-dma-objs := fsl_dma.o
obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o
obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o
obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o
obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
......
This diff is collapsed.
/*
* fsl_spdif.h - ALSA S/PDIF interface for the Freescale i.MX SoC
*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* Author: Nicolin Chen <b42378@freescale.com>
*
* Based on fsl_ssi.h
* Author: Timur Tabi <timur@freescale.com>
* Copyright 2007-2008 Freescale Semiconductor, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#ifndef _FSL_SPDIF_DAI_H
#define _FSL_SPDIF_DAI_H
/* S/PDIF Register Map */
#define REG_SPDIF_SCR 0x0 /* SPDIF Configuration Register */
#define REG_SPDIF_SRCD 0x4 /* CDText Control Register */
#define REG_SPDIF_SRPC 0x8 /* PhaseConfig Register */
#define REG_SPDIF_SIE 0xc /* InterruptEn Register */
#define REG_SPDIF_SIS 0x10 /* InterruptStat Register */
#define REG_SPDIF_SIC 0x10 /* InterruptClear Register */
#define REG_SPDIF_SRL 0x14 /* SPDIFRxLeft Register */
#define REG_SPDIF_SRR 0x18 /* SPDIFRxRight Register */
#define REG_SPDIF_SRCSH 0x1c /* SPDIFRxCChannel_h Register */
#define REG_SPDIF_SRCSL 0x20 /* SPDIFRxCChannel_l Register */
#define REG_SPDIF_SRU 0x24 /* UchannelRx Register */
#define REG_SPDIF_SRQ 0x28 /* QchannelRx Register */
#define REG_SPDIF_STL 0x2C /* SPDIFTxLeft Register */
#define REG_SPDIF_STR 0x30 /* SPDIFTxRight Register */
#define REG_SPDIF_STCSCH 0x34 /* SPDIFTxCChannelCons_h Register */
#define REG_SPDIF_STCSCL 0x38 /* SPDIFTxCChannelCons_l Register */
#define REG_SPDIF_SRFM 0x44 /* FreqMeas Register */
#define REG_SPDIF_STC 0x50 /* SPDIFTxClk Register */
/* SPDIF Configuration register */
#define SCR_RXFIFO_CTL_OFFSET 23
#define SCR_RXFIFO_CTL_MASK (1 << SCR_RXFIFO_CTL_OFFSET)
#define SCR_RXFIFO_CTL_ZERO (1 << SCR_RXFIFO_CTL_OFFSET)
#define SCR_RXFIFO_OFF_OFFSET 22
#define SCR_RXFIFO_OFF_MASK (1 << SCR_RXFIFO_OFF_OFFSET)
#define SCR_RXFIFO_OFF (1 << SCR_RXFIFO_OFF_OFFSET)
#define SCR_RXFIFO_RST_OFFSET 21
#define SCR_RXFIFO_RST_MASK (1 << SCR_RXFIFO_RST_OFFSET)
#define SCR_RXFIFO_RST (1 << SCR_RXFIFO_RST_OFFSET)
#define SCR_RXFIFO_FSEL_OFFSET 19
#define SCR_RXFIFO_FSEL_MASK (0x3 << SCR_RXFIFO_FSEL_OFFSET)
#define SCR_RXFIFO_FSEL_IF0 (0x0 << SCR_RXFIFO_FSEL_OFFSET)
#define SCR_RXFIFO_FSEL_IF4 (0x1 << SCR_RXFIFO_FSEL_OFFSET)
#define SCR_RXFIFO_FSEL_IF8 (0x2 << SCR_RXFIFO_FSEL_OFFSET)
#define SCR_RXFIFO_FSEL_IF12 (0x3 << SCR_RXFIFO_FSEL_OFFSET)
#define SCR_RXFIFO_AUTOSYNC_OFFSET 18
#define SCR_RXFIFO_AUTOSYNC_MASK (1 << SCR_RXFIFO_AUTOSYNC_OFFSET)
#define SCR_RXFIFO_AUTOSYNC (1 << SCR_RXFIFO_AUTOSYNC_OFFSET)
#define SCR_TXFIFO_AUTOSYNC_OFFSET 17
#define SCR_TXFIFO_AUTOSYNC_MASK (1 << SCR_TXFIFO_AUTOSYNC_OFFSET)
#define SCR_TXFIFO_AUTOSYNC (1 << SCR_TXFIFO_AUTOSYNC_OFFSET)
#define SCR_TXFIFO_FSEL_OFFSET 15
#define SCR_TXFIFO_FSEL_MASK (0x3 << SCR_TXFIFO_FSEL_OFFSET)
#define SCR_TXFIFO_FSEL_IF0 (0x0 << SCR_TXFIFO_FSEL_OFFSET)
#define SCR_TXFIFO_FSEL_IF4 (0x1 << SCR_TXFIFO_FSEL_OFFSET)
#define SCR_TXFIFO_FSEL_IF8 (0x2 << SCR_TXFIFO_FSEL_OFFSET)
#define SCR_TXFIFO_FSEL_IF12 (0x3 << SCR_TXFIFO_FSEL_OFFSET)
#define SCR_LOW_POWER (1 << 13)
#define SCR_SOFT_RESET (1 << 12)
#define SCR_TXFIFO_CTRL_OFFSET 10
#define SCR_TXFIFO_CTRL_MASK (0x3 << SCR_TXFIFO_CTRL_OFFSET)
#define SCR_TXFIFO_CTRL_ZERO (0x0 << SCR_TXFIFO_CTRL_OFFSET)
#define SCR_TXFIFO_CTRL_NORMAL (0x1 << SCR_TXFIFO_CTRL_OFFSET)
#define SCR_TXFIFO_CTRL_ONESAMPLE (0x2 << SCR_TXFIFO_CTRL_OFFSET)
#define SCR_DMA_RX_EN_OFFSET 9
#define SCR_DMA_RX_EN_MASK (1 << SCR_DMA_RX_EN_OFFSET)
#define SCR_DMA_RX_EN (1 << SCR_DMA_RX_EN_OFFSET)
#define SCR_DMA_TX_EN_OFFSET 8
#define SCR_DMA_TX_EN_MASK (1 << SCR_DMA_TX_EN_OFFSET)
#define SCR_DMA_TX_EN (1 << SCR_DMA_TX_EN_OFFSET)
#define SCR_VAL_OFFSET 5
#define SCR_VAL_MASK (1 << SCR_VAL_OFFSET)
#define SCR_VAL_CLEAR (1 << SCR_VAL_OFFSET)
#define SCR_TXSEL_OFFSET 2
#define SCR_TXSEL_MASK (0x7 << SCR_TXSEL_OFFSET)
#define SCR_TXSEL_OFF (0 << SCR_TXSEL_OFFSET)
#define SCR_TXSEL_RX (1 << SCR_TXSEL_OFFSET)
#define SCR_TXSEL_NORMAL (0x5 << SCR_TXSEL_OFFSET)
#define SCR_USRC_SEL_OFFSET 0x0
#define SCR_USRC_SEL_MASK (0x3 << SCR_USRC_SEL_OFFSET)
#define SCR_USRC_SEL_NONE (0x0 << SCR_USRC_SEL_OFFSET)
#define SCR_USRC_SEL_RECV (0x1 << SCR_USRC_SEL_OFFSET)
#define SCR_USRC_SEL_CHIP (0x3 << SCR_USRC_SEL_OFFSET)
/* SPDIF CDText control */
#define SRCD_CD_USER_OFFSET 1
#define SRCD_CD_USER (1 << SRCD_CD_USER_OFFSET)
/* SPDIF Phase Configuration register */
#define SRPC_DPLL_LOCKED (1 << 6)
#define SRPC_CLKSRC_SEL_OFFSET 7
#define SRPC_CLKSRC_SEL_MASK (0xf << SRPC_CLKSRC_SEL_OFFSET)
#define SRPC_CLKSRC_SEL_SET(x) ((x << SRPC_CLKSRC_SEL_OFFSET) & SRPC_CLKSRC_SEL_MASK)
#define SRPC_CLKSRC_SEL_LOCKED_OFFSET1 5
#define SRPC_CLKSRC_SEL_LOCKED_OFFSET2 2
#define SRPC_GAINSEL_OFFSET 3
#define SRPC_GAINSEL_MASK (0x7 << SRPC_GAINSEL_OFFSET)
#define SRPC_GAINSEL_SET(x) ((x << SRPC_GAINSEL_OFFSET) & SRPC_GAINSEL_MASK)
#define SRPC_CLKSRC_MAX 16
enum spdif_gainsel {
GAINSEL_MULTI_24 = 0,
GAINSEL_MULTI_16,
GAINSEL_MULTI_12,
GAINSEL_MULTI_8,
GAINSEL_MULTI_6,
GAINSEL_MULTI_4,
GAINSEL_MULTI_3,
};
#define GAINSEL_MULTI_MAX (GAINSEL_MULTI_3 + 1)
#define SPDIF_DEFAULT_GAINSEL GAINSEL_MULTI_8
/* SPDIF interrupt mask define */
#define INT_DPLL_LOCKED (1 << 20)
#define INT_TXFIFO_UNOV (1 << 19)
#define INT_TXFIFO_RESYNC (1 << 18)
#define INT_CNEW (1 << 17)
#define INT_VAL_NOGOOD (1 << 16)
#define INT_SYM_ERR (1 << 15)
#define INT_BIT_ERR (1 << 14)
#define INT_URX_FUL (1 << 10)
#define INT_URX_OV (1 << 9)
#define INT_QRX_FUL (1 << 8)
#define INT_QRX_OV (1 << 7)
#define INT_UQ_SYNC (1 << 6)
#define INT_UQ_ERR (1 << 5)
#define INT_RXFIFO_UNOV (1 << 4)
#define INT_RXFIFO_RESYNC (1 << 3)
#define INT_LOSS_LOCK (1 << 2)
#define INT_TX_EM (1 << 1)
#define INT_RXFIFO_FUL (1 << 0)
/* SPDIF Clock register */
#define STC_SYSCLK_DIV_OFFSET 11
#define STC_SYSCLK_DIV_MASK (0x1ff << STC_TXCLK_SRC_OFFSET)
#define STC_SYSCLK_DIV(x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) & STC_SYSCLK_DIV_MASK)
#define STC_TXCLK_SRC_OFFSET 8
#define STC_TXCLK_SRC_MASK (0x7 << STC_TXCLK_SRC_OFFSET)
#define STC_TXCLK_SRC_SET(x) ((x << STC_TXCLK_SRC_OFFSET) & STC_TXCLK_SRC_MASK)
#define STC_TXCLK_ALL_EN_OFFSET 7
#define STC_TXCLK_ALL_EN_MASK (1 << STC_TXCLK_ALL_EN_OFFSET)
#define STC_TXCLK_ALL_EN (1 << STC_TXCLK_ALL_EN_OFFSET)
#define STC_TXCLK_DIV_OFFSET 0
#define STC_TXCLK_DIV_MASK (0x7ff << STC_TXCLK_DIV_OFFSET)
#define STC_TXCLK_DIV(x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) & STC_TXCLK_DIV_MASK)
#define STC_TXCLK_SRC_MAX 8
/* SPDIF tx rate */
enum spdif_txrate {
SPDIF_TXRATE_32000 = 0,
SPDIF_TXRATE_44100,
SPDIF_TXRATE_48000,
};
#define SPDIF_TXRATE_MAX (SPDIF_TXRATE_48000 + 1)
#define SPDIF_CSTATUS_BYTE 6
#define SPDIF_UBITS_SIZE 96
#define SPDIF_QSUB_SIZE (SPDIF_UBITS_SIZE / 8)
#define FSL_SPDIF_RATES_PLAYBACK (SNDRV_PCM_RATE_32000 | \
SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000)
#define FSL_SPDIF_RATES_CAPTURE (SNDRV_PCM_RATE_16000 | \
SNDRV_PCM_RATE_32000 | \
SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000 | \
SNDRV_PCM_RATE_64000 | \
SNDRV_PCM_RATE_96000)
#define FSL_SPDIF_FORMATS_PLAYBACK (SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE)
#define FSL_SPDIF_FORMATS_CAPTURE (SNDRV_PCM_FMTBIT_S24_LE)
#endif /* _FSL_SPDIF_DAI_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment