Skip to content

L
linux
Commit a25d5826 authored by Alan Cox's avatar Alan Cox Committed by Linus Torvalds
Browse files
Options

[PATCH] update the qic02 tape driver to 2.5.44

parent 693bef4c
Show whitespace changes
Inline Side-by-side
Showing with 267 additions and 432 deletions
drivers/char/tpqic02.c
View file @ a25d5826
......@@ -116,26 +116,28 @@
* card+drive info if runtime configuration has been selected.
*/
static struct mtconfiginfo qic02_tape_dynconf = /* user settable */
{ 0, 0, BOGUS_IRQ, 0, 0, TPQD_DEFAULT_FLAGS, };
static struct mtconfiginfo qic02_tape_dynconf = {
/* user settable */
0, 0, BOGUS_IRQ, 0, 0, TPQD_DEFAULT_FLAGS,
};
static struct qic02_ccb qic02_tape_ccb; /* private stuff */
#else
unsigned long qic02_tape_debug = TPQD_DEFAULT_FLAGS;
static unsigned long qic02_tape_debug = TPQD_DEFAULT_FLAGS;
# if ((QIC02_TAPE_IFC!=WANGTEK) && (QIC02_TAPE_IFC!=ARCHIVE) && (QIC02_TAPE_IFC!=MOUNTAIN))
# error No valid interface card specified
# endif
#endif /* CONFIG_QIC02_DYNCONF */
static volatile int ctlbits; /* control reg bits for tape interface */
static int ctlbits; /* control reg bits for tape interface */
static wait_queue_head_t qic02_tape_transfer; /* sync rw with interrupts */
static volatile struct mtget ioctl_status; /* current generic status */
static struct mtget ioctl_status; /* current generic status */
static volatile struct tpstatus tperror; /* last drive status */
static struct tpstatus tperror; /* last drive status */
static char rcs_revision[] = "$Revision: 1.10 $";
static char rcs_date[] = "$Date: 1997/01/26 07:13:20 $";
......@@ -145,32 +147,34 @@ static char rcs_date[] = "$Date: 1997/01/26 07:13:20 $";
* Some variables need `volatile' because they may be modified
* by an interrupt.
*/
static volatile flag status_dead = YES; /* device is legally dead until proven alive */
static flag status_dead = YES; /* device is legally dead until proven alive */
static flag status_zombie = YES; /* it's `zombie' until irq/dma allocated */
static volatile flag status_bytes_wr = NO; /* write FM at close or not */
static volatile flag status_bytes_rd = NO; /* (rd|wr) used for rewinding */
static flag status_bytes_wr = NO; /* write FM at close or not */
static flag status_bytes_rd = NO; /* (rd|wr) used for rewinding */
static volatile unsigned long status_cmd_pending; /* cmd in progress */
static volatile flag status_expect_int = NO; /* ready for interrupts */
static volatile flag status_timer_on = NO; /* using time-out */
static volatile int status_error; /* int handler may detect error */
static volatile flag status_eof_detected = NO; /* end of file */
static volatile flag status_eom_detected = NO; /* end of recorded media */
static volatile flag status_eot_detected = NO; /* end of tape */
static volatile flag doing_read = NO;
static volatile flag doing_write = NO;
static volatile unsigned long dma_bytes_todo;
static volatile unsigned long dma_bytes_done;
static flag status_expect_int = NO; /* ready for interrupts */
static flag status_timer_on = NO; /* using time-out */
static int status_error; /* int handler may detect error */
static flag status_eof_detected = NO; /* end of file */
static flag status_eom_detected = NO; /* end of recorded media */
static flag status_eot_detected = NO; /* end of tape */
static flag doing_read = NO;
static flag doing_write = NO;
static unsigned long dma_bytes_todo;
static unsigned long dma_bytes_done;
static volatile unsigned dma_mode; /* !=0 also means DMA in use */
static flag need_rewind = YES;
static kdev_t current_tape_dev;
static int extra_blocks_left = BLOCKS_BEYOND_EW;
static struct timer_list tp_timer;
static unsigned long tape_open; /* Guard open one only */
static DECLARE_MUTEX(tape_op); /* Serialize tape operations */
/* return_*_eof:
* NO: not at EOF,
* YES: tell app EOF was reached (return 0).
......@@ -183,6 +187,7 @@ static struct timer_list tp_timer;
* move on to the next file.
*
*/
static flag return_read_eof = NO; /* set to signal app EOF was reached */
static flag return_write_eof = NO;
static flag reported_read_eof = NO; /* set when we've done that */
......@@ -248,70 +253,34 @@ static struct exception_list_type {
const char *msg;
/* EXC_nr attribute should match with tpqic02.h */
} exception_list[] = {
{
0, 0, "Unknown exception status code", /* extra: 0 */ },
{
~(0), TP_ST0 | TP_CNI | TP_USL | TP_WRP,
"Drive not online" /* 1 */ },
/* Drive presence goes before cartridge presence. */
{
~(TP_WRP | TP_USL), TP_ST0 | TP_CNI,
{ 0, 0, "Unknown exception status code", /* extra: 0 */ },
{ ~(0), TP_ST0 | TP_CNI | TP_USL | TP_WRP, "Drive not online" /* 1 */ }, /* Drive presence goes before cartridge presence. */
{ ~(TP_WRP | TP_USL), TP_ST0 | TP_CNI,
/* My Wangtek 5150EQ sometimes reports a status code
* of 0x00e0, which is not a valid exception code, but
* I think it should be recognized as "NO CARTRIDGE".
*/
"Cartridge not in place" /* 2 */ },
{
(unsigned short) ~(TP_ST1 | TP_BOM), (TP_ST0 | TP_WRP),
"Write protected cartridge" /* 3 */ },
{
(unsigned short) ~(TP_ST1 | TP_EOR), (TP_ST0 | TP_EOM),
"End of media" /* 4 */ },
{
~TP_WRP, TP_ST0 | TP_UDA | TP_ST1 | TP_BOM,
"Read or Write abort. Rewind tape." /* 5 */ },
{
~TP_WRP, TP_ST0 | TP_UDA,
"Read error. Bad block transferred." /* 6 */ },
{
~TP_WRP, TP_ST0 | TP_UDA | TP_BNL,
"Read error. Filler block transferred." /* 7 */ },
{
~TP_WRP, TP_ST0 | TP_UDA | TP_BNL | TP_ST1 | TP_NDT,
"Read error. No data detected." /* 8 */ },
{
~TP_WRP,
TP_ST0 | TP_EOM | TP_UDA | TP_BNL | TP_ST1 |
TP_NDT, "Read error. No data detected. EOM." /* 9 */ },
{
~(TP_WRP | TP_MBD | TP_PAR | TP_EOR),
TP_ST0 | TP_UDA | TP_BNL | TP_ST1 | TP_NDT |
TP_BOM,
"Read error. No data detected. BOM." /* 10 */ },
{
~(TP_WRP | TP_EOM), TP_ST0 | TP_FIL,
{ (unsigned short) ~(TP_ST1 | TP_BOM), (TP_ST0 | TP_WRP), "Write protected cartridge" /* 3 */ },
{ (unsigned short) ~(TP_ST1 | TP_EOR), (TP_ST0 | TP_EOM), "End of media" /* 4 */ },
{ ~TP_WRP, TP_ST0 | TP_UDA | TP_ST1 | TP_BOM, "Read or Write abort. Rewind tape." /* 5 */ },
{ ~TP_WRP, TP_ST0 | TP_UDA, "Read error. Bad block transferred." /* 6 */ },
{ ~TP_WRP, TP_ST0 | TP_UDA | TP_BNL, "Read error. Filler block transferred." /* 7 */ },
{ ~TP_WRP, TP_ST0 | TP_UDA | TP_BNL | TP_ST1 | TP_NDT, "Read error. No data detected." /* 8 */ },
{ ~TP_WRP, TP_ST0 | TP_EOM | TP_UDA | TP_BNL | TP_ST1 | TP_NDT, "Read error. No data detected. EOM." /* 9 */ },
{ ~(TP_WRP | TP_MBD | TP_PAR | TP_EOR), TP_ST0 | TP_UDA | TP_BNL | TP_ST1 | TP_NDT | TP_BOM, "Read error. No data detected. BOM." /* 10 */ },
{ ~(TP_WRP | TP_EOM), TP_ST0 | TP_FIL,
/* Status 0x0089 (EOM & FM) is viewed as an FM,
* because it can only happen during a read.
* EOM is checked separately for an FM condition.
*/
"File mark detected" /* 11 */ },
{
~(TP_ST0 | TP_CNI | TP_USL | TP_WRP | TP_BOM),
TP_ST1 | TP_ILL, "Illegal command" /* 12 */ },
{
~(TP_ST0 | TP_CNI | TP_USL | TP_WRP | TP_BOM),
TP_ST1 | TP_POR, "Reset occurred" /* 13 */ },
{
~TP_WRP, TP_ST0 | TP_FIL | TP_MBD, /* NOTE: ST1 not set! */
"Marginal block detected" /* 14 */ },
{
~(TP_ST0 | TP_WRP | TP_EOM | TP_UDA | TP_BNL | TP_FIL |
TP_NDT), TP_ST1 | TP_EOR,
/********** Is the extra TP_NDT really needed Eddy? **********/
"End of recorded media" /* extra: 15 */ },
{ ~(TP_ST0 | TP_CNI | TP_USL | TP_WRP | TP_BOM), TP_ST1 | TP_ILL, "Illegal command" /* 12 */ },
{ ~(TP_ST0 | TP_CNI | TP_USL | TP_WRP | TP_BOM), TP_ST1 | TP_POR, "Reset occurred" /* 13 */ },
{ ~TP_WRP, TP_ST0 | TP_FIL | TP_MBD, /* NOTE: ST1 not set! */ "Marginal block detected" /* 14 */ },
{ ~(TP_ST0 | TP_WRP | TP_EOM | TP_UDA | TP_BNL | TP_FIL | TP_NDT), TP_ST1 | TP_EOR, /********** Is the extra TP_NDT really needed Eddy? **********/ "End of recorded media" /* extra: 15 */ },
/* 15 is returned when SEEKEOD completes successfully */
{
~(TP_WRP | TP_ST0), TP_ST1 | TP_BOM, "Beginning of media" /* extra: 16 */ }
{ ~(TP_WRP | TP_ST0), TP_ST1 | TP_BOM, "Beginning of media" /* extra: 16 */ }
};
#define NR_OF_EXC (sizeof(exception_list)/sizeof(struct exception_list_type))
......@@ -333,24 +302,12 @@ static void tpqputs(unsigned long flags, const char *s)
} /* tpqputs */
/* Perform byte order swapping for a 16-bit word.
*
* [FIXME] This should probably be in include/asm/
* ([FIXME] i486 can do this faster)
*/
static inline void byte_swap_w(volatile unsigned short *w)
{
int t = *w;
*w = (t >> 8) | ((t & 0xff) << 8);
}
/* Init control register bits on interface card.
* For Archive, interrupts must be enabled explicitly.
* Wangtek interface card requires ONLINE to be set, Archive SC402/SC499R
* cards keep it active all the time.
*/
static void ifc_init(void)
{
if (QIC02_TAPE_IFC == WANGTEK) { /* || (QIC02_TAPE_IFC == EVEREX) */
......@@ -374,10 +331,8 @@ static void report_qic_exception(unsigned n)
tpqputs(TPQD_ALWAYS, "Oops -- report_qic_exception");
n = 0;
}
if (TPQDBG(SENSE_TEXT) || n == 0) {
printk(TPQIC02_NAME ": sense: %s\n",
exception_list[n].msg);
}
if (TPQDBG(SENSE_TEXT) || n == 0)
printk(TPQIC02_NAME ": sense: %s\n", exception_list[n].msg);
} /* report_qic_exception */
......@@ -395,9 +350,7 @@ static int decode_qic_exception_nr(unsigned s)
return i;
}
}
printk(TPQIC02_NAME
": decode_qic_exception_nr: exception(%x) not recognized\n",
s);
printk(TPQIC02_NAME ": decode_qic_exception_nr: exception(%x) not recognized\n", s);
return 0;
} /* decode_qic_exception_nr */
......@@ -477,15 +430,13 @@ static int tape_reset(int verbose)
/* KLUDGE FOR G++ BUG */
{
int stat = inb_p(QIC02_STAT_PORT);
status_dead =
((stat & QIC02_STAT_RESETMASK) != QIC02_STAT_RESETVAL);
status_dead = ((stat & QIC02_STAT_RESETMASK) != QIC02_STAT_RESETVAL);
}
/* if successful, inb(STAT) returned RESETVAL */
if (status_dead == YES) {
if (status_dead == YES)
printk(TPQIC02_NAME ": reset failed!\n");
} else if (verbose) {
else if (verbose)
printk(TPQIC02_NAME ": reset successful\n");
}
return (status_dead == YES) ? TE_DEAD : TE_OK;
} /* tape_reset */
......@@ -528,11 +479,10 @@ static int notify_cmd(char cmd, short ignore_ex)
* it could be *much* longer!
*/
while ((inb_p(QIC02_STAT_PORT) & QIC02_STAT_READY) && (--i > 0))
/*skip */ ;
udelay(1);
/* wait for ready */
if (i == 0) {
tpqputs(TPQD_ALWAYS,
"timed out waiting for ready in notify_cmd");
tpqputs(TPQD_ALWAYS, "timed out waiting for ready in notify_cmd");
status_dead = YES;
return TE_TIM;
}
......@@ -541,7 +491,7 @@ static int notify_cmd(char cmd, short ignore_ex)
i = TAPE_NOTIFY_TIMEOUT;
/* according to the specs this one should never time-out */
while (((inb_p(QIC02_STAT_PORT) & QIC02_STAT_READY) == 0) && (--i > 0))
/*skip */ ;
udelay(1);
/* wait for not ready */
if (i == 0) {
tpqputs(TPQD_ALWAYS, "timed out waiting for !ready in notify_cmd");
......@@ -568,7 +518,7 @@ static int wait_for_ready(time_t timeout)
*/
spin_t = 50;
while (((stat = inb_p(QIC02_STAT_PORT) & QIC02_STAT_MASK) == QIC02_STAT_MASK) && (--spin_t > 0))
/*SKIP*/;
udelay(1);
if ((stat & QIC02_STAT_READY) == 0)
return TE_OK; /* covers 99.99% of all calls */
......@@ -580,9 +530,11 @@ static int wait_for_ready(time_t timeout)
spin_t += jiffies;
/* FIXME...*/
while (((stat = inb_p(QIC02_STAT_PORT) & QIC02_STAT_MASK) == QIC02_STAT_MASK)
&& time_before(jiffies, spin_t))
schedule(); /* don't waste all the CPU time */
while (((stat = inb_p(QIC02_STAT_PORT) & QIC02_STAT_MASK) == QIC02_STAT_MASK) && time_before(jiffies, spin_t))
{
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1); /* don't waste all the CPU time */
}
if ((stat & QIC02_STAT_READY) == 0)
return TE_OK;
......@@ -611,8 +563,7 @@ static int wait_for_ready(time_t timeout)
}
if ((stat & QIC02_STAT_EXCEPTION) == 0) {
tpqputs(TPQD_ALWAYS,
"exception detected after waiting_for_ready");
tpqputs(TPQD_ALWAYS, "exception detected after waiting_for_ready");
return TE_EX;
} else {
return TE_OK;
......@@ -627,7 +578,6 @@ static int send_qic02_data(char sb[], unsigned size, int ignore_ex)
int i, stat;
for (i = 0; i < size; i++) {
stat = wait_for_ready(TIM_S);
if (stat != TE_OK)
return stat;
......@@ -700,9 +650,12 @@ static int rdstatus(char *stp, unsigned size, char qcmd)
* de-schedule immediately, we waste a lot of time because a
* task switch is much longer than we usually have to wait here.
*/
n = 1000; /* 500 is not enough on a 486/33 */
n = 700;
while ((n > 0) && ((inb_p(QIC02_STAT_PORT) & QIC02_STAT_MASK) == QIC02_STAT_MASK))
{
udelay(1);
n--; /* wait for ready or exception or timeout */
}
if (n == 0) {
/* n (above) should be chosen such that on your machine
* you rarely ever see the message below, and it should
......@@ -711,7 +664,10 @@ static int rdstatus(char *stp, unsigned size, char qcmd)
/* FIXME */
tpqputs(TPQD_ALWAYS, "waiting looong in rdstatus() -- drive dead?");
while ((inb_p(QIC02_STAT_PORT) & QIC02_STAT_MASK) == QIC02_STAT_MASK)
schedule();
{
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1);
}
tpqputs(TPQD_ALWAYS, "finished waiting in rdstatus()");
}
......@@ -737,12 +693,12 @@ static int rdstatus(char *stp, unsigned size, char qcmd)
*q = inb_p(QIC02_DATA_PORT); /* read status byte */
if (TP_DIAGS(current_tape_dev))
printk("[%1d]=0x%x ", q - stp,
(unsigned) (*q) & 0xff);
printk("[%1d]=0x%x ", q - stp, (unsigned) (*q) & 0xff);
outb_p(ctlbits | QIC02_CTL_REQUEST, QIC02_CTL_PORT); /* set request */
while ((inb_p(QIC02_STAT_PORT) & QIC02_STAT_READY) == 0); /* wait for not ready */
while ((inb_p(QIC02_STAT_PORT) & QIC02_STAT_READY) == 0)
cpu_relax(); /* wait for not ready */
udelay(22); /* delay >20 usec */
......@@ -754,7 +710,7 @@ static int rdstatus(char *stp, unsigned size, char qcmd)
* My drive doesn't seem to need it here yet, but others do?
*/
while (inb_p(QIC02_STAT_PORT) & QIC02_STAT_READY)
/*skip */ ;
cpu_relax();
/* wait for ready */
if (TP_DIAGS(current_tape_dev))
......@@ -772,13 +728,8 @@ static int rdstatus(char *stp, unsigned size, char qcmd)
static int get_status(volatile struct tpstatus *stp)
{
int stat = rdstatus((char *) stp, TPSTATSIZE, QCMD_RD_STAT);
#if defined(__i386__) || defined (__x86_64__)
byte_swap_w(&(stp->dec));
byte_swap_w(&(stp->urc));
#else
#warning Undefined architecture
/* should probably swap status bytes #definition */
#endif
stp->dec = be16_to_cpu(stp->dec);
stp->urc = be16_to_cpu(stp->urc);
return stat;
} /* get_status */
......@@ -823,8 +774,7 @@ static int tp_sense(int ignore)
static void finish_rw(int cmd);
if (TPQDBG(SENSE_TEXT))
printk(TPQIC02_NAME ": tp_sense(ignore=0x%x) enter\n",
ignore);
printk(TPQIC02_NAME ": tp_sense(ignore=0x%x) enter\n", ignore);
/* sense() is not allowed during a read or write cycle */
if (doing_write == YES)
......@@ -842,11 +792,8 @@ static int tp_sense(int ignore)
if (err & (TP_ST0 | TP_ST1))
printk(TPQIC02_NAME ": tp_sense: status: %x, error count: %d, underruns: %d\n",
tperror.exs, tperror.dec, tperror.urc);
else if ((tperror.dec != 0) || (tperror.urc != 0)
|| TPQDBG(SENSE_CNTS))
printk(TPQIC02_NAME
": tp_sense: no hard errors, soft error count: %d, underruns: %d\n",
tperror.dec, tperror.urc);
else if ((tperror.dec != 0) || (tperror.urc != 0) || TPQDBG(SENSE_CNTS))
printk(TPQIC02_NAME ": tp_sense: no hard errors, soft error count: %d, underruns: %d\n", tperror.dec, tperror.urc);
/* Set generic status. HP-UX defines these, but some extra would
* be useful. Problem is to remain compatible. [Do we want to be
......@@ -909,9 +856,7 @@ static int wait_for_rewind(time_t timeout)
stat = inb(QIC02_STAT_PORT) & QIC02_STAT_MASK;
if (TPQDBG(REWIND))
printk(TPQIC02_NAME
": Waiting for (re-)wind to finish: stat=0x%x\n",
stat);
printk(TPQIC02_NAME ": Waiting for (re-)wind to finish: stat=0x%x\n", stat);
stat = wait_for_ready(timeout);
......@@ -946,13 +891,13 @@ static int ll_do_qic_cmd(int cmd, time_t timeout)
stat = TE_OK;
}
if (stat != TE_OK) {
printk(TPQIC02_NAME ": ll_do_qic_cmd(%x, %ld) failed\n",
cmd, (long) timeout);
printk(TPQIC02_NAME ": ll_do_qic_cmd(%x, %ld) failed\n", cmd, (long) timeout);
return -EIO;
}
#if OBSOLETE
/* wait for ready since it may not be active immediately after reading status */
while ((inb_p(QIC02_STAT_PORT) & QIC02_STAT_READY) != 0);
while ((inb_p(QIC02_STAT_PORT) & QIC02_STAT_READY) != 0)
cpu_relax();
#endif
stat = send_qic02_cmd(cmd, timeout, 0); /* (checks for exceptions) */
......@@ -982,21 +927,16 @@ static int ll_do_qic_cmd(int cmd, time_t timeout)
/* sense() will set eof/eom as required */
if (stat == TE_EX) {
if (tp_sense(TP_WRP | TP_BOM | TP_EOM | TP_FIL) != TE_OK) {
printk(TPQIC02_NAME
": Exception persist in ll_do_qic_cmd[1](%x, %ld)",
cmd, (long) timeout);
printk(TPQIC02_NAME ": Exception persist in ll_do_qic_cmd[1](%x, %ld)", cmd, (long) timeout);
status_dead = YES;
return -ENXIO;
/* if rdstatus fails too, we're in trouble */
}
} else if (stat != TE_OK) {
printk(TPQIC02_NAME
": ll_do_qic_cmd: send_qic02_cmd failed, stat = 0x%x\n",
stat);
printk(TPQIC02_NAME ": ll_do_qic_cmd: send_qic02_cmd failed, stat = 0x%x\n", stat);
return -EIO; /*** -EIO is probably not always appropriate */
}
if (timeout == TIM_R)
stat = wait_for_rewind(timeout);
else
......@@ -1007,18 +947,14 @@ static int ll_do_qic_cmd(int cmd, time_t timeout)
TP_EOR | TP_NDT | TP_UDA | TP_BNL | TP_WRP |
TP_BOM | TP_EOM | TP_FIL : TP_WRP | TP_BOM |
TP_EOM | TP_FIL)) != TE_OK) {
printk(TPQIC02_NAME
": Exception persist in ll_do_qic_cmd[2](%x, %ld)\n",
cmd, (long) timeout);
printk(TPQIC02_NAME ": Exception persist in ll_do_qic_cmd[2](%x, %ld)\n", cmd, (long) timeout);
if (cmd != QCMD_RD_FM)
status_dead = YES;
return -ENXIO;
/* if rdstatus fails too, we're in trouble */
}
} else if (stat != TE_OK) {
printk(TPQIC02_NAME
": ll_do_qic_cmd %x: wait failed, stat == 0x%x\n",
cmd, stat);
printk(TPQIC02_NAME ": ll_do_qic_cmd %x: wait failed, stat == 0x%x\n", cmd, stat);
return -EIO;
}
return 0;
......@@ -1052,9 +988,14 @@ static int ll_do_qic_cmd(int cmd, time_t timeout)
static void terminate_read(int cmd)
{
if (doing_read == YES) {
if (doing_read != YES)
return;
doing_read = NO;
if (cmd != QCMD_RD_FM) {
if (cmd == QCMD_RD_FM)
return;
/* if the command is a RFM, there is no need to do this
* because a RFM will legally terminate the read-cycle.
*/
......@@ -1067,17 +1008,12 @@ static void terminate_read(int cmd)
}
if (tp_sense(TP_FIL | TP_EOM | TP_WRP) != TE_OK) {
tpqputs(TPQD_ALWAYS,
"finish_rw[read1]: ignore the 2 lines above");
tpqputs(TPQD_ALWAYS, "finish_rw[read1]: ignore the 2 lines above");
if (is_exception()) {
if (tp_sense
(TP_ILL | TP_FIL | TP_EOM |
TP_WRP) != TE_OK)
if (tp_sense(TP_ILL | TP_FIL | TP_EOM | TP_WRP) != TE_OK)
tpqputs(TPQD_ALWAYS,"finish_rw[read2]: read cycle error");
}
}
}
}
} /* terminate_read */
......@@ -1085,15 +1021,16 @@ static void terminate_write(int cmd)
{
int stat;
if (doing_write == YES) {
if (doing_write != YES)
return;
doing_write = NO;
/* Finish writing by appending a FileMark at the end. */
if (cmd != QCMD_WRT_FM) {
/* finish off write cycle */
stat = ll_do_qic_cmd(QCMD_WRT_FM, TIM_M);
if (stat != TE_OK)
tpqputs(TPQD_ALWAYS,
"Couldn't finish write cycle properly");
tpqputs(TPQD_ALWAYS, "Couldn't finish write cycle properly");
(void) tp_sense(0);
}
/* If there is an EOF token waiting to be returned to
......@@ -1101,7 +1038,6 @@ static void terminate_write(int cmd)
* We could be at EOT, so don't reset return_write_eof.
*/
reported_write_eof = YES;
}
} /* terminate_write */
......@@ -1109,8 +1045,7 @@ static void terminate_write(int cmd)
static void finish_rw(int cmd)
{
if (wait_for_ready(TIM_S) != TE_OK) {
tpqputs(TPQD_ALWAYS,
"error: drive not ready in finish_rw() !");
tpqputs(TPQD_ALWAYS, "error: drive not ready in finish_rw() !");
return;
}
terminate_read(cmd);
......@@ -1172,8 +1107,7 @@ static int do_ioctl_cmd(int cmd)
case MTBSF:
if (TP_HAVE_BSF) {
tpqputs(TPQD_IOCTLS,
"MTBSF backward searching filemark -- optional command");
tpqputs(TPQD_IOCTLS, "MTBSF backward searching filemark -- optional command");
if ((mode_access == WRITE) && status_bytes_wr)
return -EACCES;
stat = do_qic_cmd(QCMD_RD_FM_BCK, TIM_F);
......@@ -1377,12 +1311,7 @@ static int do_ioctl_cmd(int cmd)
/* dma_transfer(): This routine is called for every 512 bytes to be read
* from/written to the tape controller. Speed is important here!
* (There must be enough time left for the hd controller!)
* When other devices use DMA they must ensure they use un-interruptible
* double byte accesses to the DMA controller. Floppy.c is ok.
* Must have interrupts disabled when this function is invoked,
* otherwise, the double-byte transfers to the DMA controller will not
* be atomic. That could lead to nasty problems when they are interrupted
* by other DMA interrupt-routines.
* The dma lock protects the DMA controller
*
* This routine merely does the least possible to keep
* the transfers going:
......@@ -1407,8 +1336,7 @@ static inline void dma_transfer(void)
flags = claim_dma_lock();
clear_dma_ff(QIC02_TAPE_DMA);
set_dma_mode(QIC02_TAPE_DMA, dma_mode);
set_dma_addr(QIC02_TAPE_DMA,
isa_virt_to_bus(buffaddr) + dma_bytes_done);
set_dma_addr(QIC02_TAPE_DMA, isa_virt_to_bus(buffaddr) + dma_bytes_done);
set_dma_count(QIC02_TAPE_DMA, TAPE_BLKSIZE);
/* start tape DMA controller */
......@@ -1452,7 +1380,6 @@ static int start_dma(short mode, unsigned long bytes_todo)
/* assume 'bytes_todo'>0 */
{
int stat;
unsigned long flags;
tpqputs(TPQD_DEBUG, "start_dma() enter");
TPQDEB( {printk(TPQIC02_NAME ": doing_read==%d, doing_write==%d\n",
......@@ -1484,17 +1411,14 @@ static int start_dma(short mode, unsigned long bytes_todo)
/* TP_CNI should now be handled in open(). -Hennus */
#endif
stat =
tp_sense(((mode ==
WRITE) ? 0 : TP_WRP) | TP_BOM | TP_FIL);
stat = tp_sense(((mode == WRITE) ? 0 : TP_WRP) | TP_BOM | TP_FIL);
if (stat != TE_OK)
return stat;
#if OBSOLETE
/************* not needed iff rd_status() would wait for ready!!!!!! **********/
if (wait_for_ready(TIM_S) != TE_OK) { /*** not sure this is needed ***/
tpqputs(TPQD_ALWAYS,
"wait_for_ready failed in start_dma");
tpqputs(TPQD_ALWAYS, "wait_for_ready failed in start_dma");
return -EIO;
}
#endif
......@@ -1507,11 +1431,9 @@ static int start_dma(short mode, unsigned long bytes_todo)
/* Tell the controller the data direction */
/* r/w, timeout medium, check exceptions, sets status_cmd_pending. */
stat = send_qic02_cmd((mode == WRITE)
? QCMD_WRT_DATA : QCMD_RD_DATA, TIM_M, 0);
stat = send_qic02_cmd((mode == WRITE) ? QCMD_WRT_DATA : QCMD_RD_DATA, TIM_M, 0);
if (stat != TE_OK) {
printk(TPQIC02_NAME ": start_dma: init %s failed\n",
(mode == WRITE) ? "write" : "read");
printk(TPQIC02_NAME ": start_dma: init %s failed\n", (mode == WRITE) ? "write" : "read");
(void) tp_sense(0);
return stat;
}
......@@ -1529,10 +1451,8 @@ static int start_dma(short mode, unsigned long bytes_todo)
doing_write = YES;
break;
default:
printk(TPQIC02_NAME
": requested unknown mode %d\n", mode);
panic(TPQIC02_NAME
": invalid mode in start_dma()");
printk(TPQIC02_NAME ": requested unknown mode %d\n", mode);
panic(TPQIC02_NAME ": invalid mode in start_dma()");
}
} else if (is_exception()) {
......@@ -1541,8 +1461,7 @@ static int start_dma(short mode, unsigned long bytes_todo)
*
* ******** this also affects EOF/EOT handling! ************
*/
tpqputs(TPQD_ALWAYS,
"detected exception in start_dma() while transfer in progress");
tpqputs(TPQD_ALWAYS, "detected exception in start_dma() while transfer in progress");
status_error = YES;
return TE_END;
}
......@@ -1557,10 +1476,7 @@ static int start_dma(short mode, unsigned long bytes_todo)
/* initiate first data block read from/write to the tape controller */
save_flags(flags);
cli();
dma_transfer();
restore_flags(flags);
TPQPUTS("start_dma() end");
return TE_OK;
......@@ -1594,7 +1510,6 @@ static void end_dma(unsigned long *bytes_done)
else if (QIC02_TAPE_IFC == ARCHIVE)
outb_p(0, AR_RESET_DMA_PORT);
else { /* QIC02_TAPE_IFC == MOUNTAIN */
/* Clear control bits, de-select ONLINE during tp_sense */
ctlbits &= ~MTN_QIC02_CTL_ONLINE;
}
......@@ -1605,7 +1520,6 @@ static void end_dma(unsigned long *bytes_done)
stat = tp_sense((dma_mode == READ) ? TP_WRP : 0);
/* no return here -- got to clean up first! */
} else { /* if (QIC02_TAPE_IFC == MOUNTAIN) */
outb_p(ctlbits, QIC02_CTL_PORT);
}
......@@ -1718,8 +1632,7 @@ static void qic02_tape_interrupt(int irq, void *dev_id,
* - something went wrong
* So don't continue with the next block.
*/
tpqputs(TPQD_ALWAYS,
"isr: exception on tape controller");
tpqputs(TPQD_ALWAYS, "isr: exception on tape controller");
printk(" status %02x\n", stat);
status_error = TE_EX;
......@@ -1740,16 +1653,14 @@ static void qic02_tape_interrupt(int irq, void *dev_id,
*/
if (QIC02_TAPE_IFC == WANGTEK) /* I think this is a drive-dependency, not IFC -- hhb */
if (stat & QIC02_STAT_READY) { /* not ready */
tpqputs(TPQD_ALWAYS,
"isr: ? Tape controller not ready");
tpqputs(TPQD_ALWAYS, "isr: ? Tape controller not ready");
r = 1;
}
flags = claim_dma_lock();
if ((i = get_dma_residue(QIC02_TAPE_DMA)) != 0) {
printk(TPQIC02_NAME ": dma_residue == %x !!!\n",
i);
printk(TPQIC02_NAME ": dma_residue == %x !!!\n", i);
r = 1; /* big trouble, but can't do much about it... */
}
......@@ -1774,8 +1685,7 @@ static void qic02_tape_interrupt(int irq, void *dev_id,
dma_transfer();
}
} else {
printk(TPQIC02_NAME ": Unexpected interrupt, stat == %x\n",
inb(QIC02_STAT_PORT));
printk(TPQIC02_NAME ": Unexpected interrupt, stat == %x\n", inb(QIC02_STAT_PORT));
}
} /* qic02_tape_interrupt */
......@@ -1812,10 +1722,8 @@ static void qic02_tape_interrupt(int irq, void *dev_id,
* request would return the EOF flag for the previous file.
*/
static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count,
loff_t * ppos)
static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count, loff_t * ppos)
{
int err;
kdev_t dev = filp->f_dentry->d_inode->i_rdev;
unsigned short flags = filp->f_flags;
unsigned long bytes_todo, bytes_done, total_bytes_done = 0;
......@@ -1827,11 +1735,8 @@ static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count,
}
if (TP_DIAGS(current_tape_dev))
/* can't print a ``long long'' (for filp->f_pos), so chop it */
printk(TPQIC02_NAME
": request READ, minor=%x, buf=%p, count=%lx"
", pos=%lx, flags=%x\n", minor(dev), buf,
(long) count, (unsigned long) filp->f_pos, flags);
printk(TPQIC02_NAME ": request READ, minor=%x, buf=%p, count=%lx, pos=%Lx, flags=%x\n", minor(dev), buf,
(long) count, filp->f_pos, flags);
if (count % TAPE_BLKSIZE) { /* Only allow mod 512 bytes at a time. */
tpqputs(TPQD_BLKSZ, "Wrong block size");
......@@ -1858,10 +1763,7 @@ static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count,
/* Must ensure that user program sees exactly one EOF token (==0) */
if (return_read_eof == YES) {
if (TPQDBG(DEBUG)) {
printk
("read: return_read_eof==%d, reported_read_eof==%d, total_bytes_done==%lu\n",
return_read_eof, reported_read_eof,
total_bytes_done);
printk("read: return_read_eof==%d, reported_read_eof==%d, total_bytes_done==%lu\n", return_read_eof, reported_read_eof, total_bytes_done);
}
if (reported_read_eof == NO) {
......@@ -1897,7 +1799,6 @@ static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count,
}
}
/*****************************/
if (bytes_todo == 0) {
return total_bytes_done;
}
......@@ -1905,9 +1806,7 @@ static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count,
if (bytes_todo > 0) {
/* start reading data */
if (is_exception()) {
/****************************************/
tpqputs(TPQD_DMAX,
"is_exception() before start_dma()!");
tpqputs(TPQD_DMAX, "is_exception() before start_dma()!");
}
/******************************************************************
......@@ -1919,12 +1818,11 @@ static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count,
stat = start_dma(READ, bytes_todo);
if (stat == TE_OK) {
/* Wait for transfer to complete, interrupt should wake us */
while (dma_mode != 0) {
sleep_on(&qic02_tape_transfer);
}
if (status_error) {
wait_event(qic02_tape_transfer, dma_mode != 0);
if (status_error)
return_read_eof = YES;
}
} else if (stat != TE_END) {
/* should do sense() on error here */
......@@ -1938,8 +1836,7 @@ static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count,
}
end_dma(&bytes_done);
if (bytes_done > bytes_todo) {
tpqputs(TPQD_ALWAYS,
"read: Oops, read more bytes than requested");
tpqputs(TPQD_ALWAYS, "read: Oops, read more bytes than requested");
return -EIO;
}
/* copy buffer to user-space in one go */
......@@ -1949,15 +1846,12 @@ static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count,
}
#if 1
/* Checks Ton's patch below */
if ((return_read_eof == NO)
&& (status_eof_detected == YES)) {
printk(TPQIC02_NAME
": read(): return_read_eof=%d, status_eof_detected=YES. return_read_eof:=YES\n",
if ((return_read_eof == NO) && (status_eof_detected == YES)) {
printk(TPQIC02_NAME ": read(): return_read_eof=%d, status_eof_detected=YES. return_read_eof:=YES\n",
return_read_eof);
}
#endif
if ((bytes_todo != bytes_done)
|| (status_eof_detected == YES)) {
if ((bytes_todo != bytes_done) || (status_eof_detected == YES)) {
/* EOF or EOM detected. return EOF next time. */
return_read_eof = YES;
}
......@@ -2006,10 +1900,8 @@ static ssize_t qic02_tape_read(struct file *filp, char *buf, size_t count,
* tape device again. The driver will detect an exception status in (No Cartridge)
* and force a rewind. After that tar may continue writing.
*/
static ssize_t qic02_tape_write(struct file *filp, const char *buf,
size_t count, loff_t * ppos)
static ssize_t qic02_tape_write(struct file *filp, const char *buf, size_t count, loff_t * ppos)
{
int err;
kdev_t dev = filp->f_dentry->d_inode->i_rdev;
unsigned short flags = filp->f_flags;
unsigned long bytes_todo, bytes_done, total_bytes_done = 0;
......@@ -2020,11 +1912,8 @@ static ssize_t qic02_tape_write(struct file *filp, const char *buf,
}
if (TP_DIAGS(current_tape_dev)) {
/* can't print a ``long long'' (for filp->f_pos), so chop it */
printk(TPQIC02_NAME ": request WRITE, minor=%x, buf=%p"
", count=%lx, pos=%lx, flags=%x\n",
minor(dev), buf,
(long) count, (unsigned long) filp->f_pos, flags);
printk(TPQIC02_NAME ": request WRITE, minor=%x, buf=%p, count=%lx, pos=%Lx, flags=%x\n",
minor(dev), buf, (long) count, filp->f_pos, flags);
}
if (count % TAPE_BLKSIZE) { /* only allow mod 512 bytes at a time */
......@@ -2063,8 +1952,7 @@ static ssize_t qic02_tape_write(struct file *filp, const char *buf,
if (reported_write_eof == NO) {
if (bytes_todo > 0) {
tpqputs(TPQD_ALWAYS,
"partial write");
tpqputs(TPQD_ALWAYS, "partial write");
/* partial write signals EOF to user program */
}
reported_write_eof = YES;
......@@ -2091,22 +1979,18 @@ static ssize_t qic02_tape_write(struct file *filp, const char *buf,
***** fail and write() will return ENXIO error
*****/
if (start_dma(WRITE, bytes_todo) != TE_OK) {
tpqputs(TPQD_ALWAYS,
"write: start_dma() failed");
tpqputs(TPQD_ALWAYS, "write: start_dma() failed");
/* should do sense() on error here */
return -ENXIO;
/*********** FIXTHIS **************/
}
/* Wait for write to complete, interrupt should wake us. */
while ((status_error == 0) && (dma_mode != 0)) {
sleep_on(&qic02_tape_transfer);
}
wait_event(qic02_tape_transfer, (status_error == 0 && dma_mode != 0));
end_dma(&bytes_done);
if (bytes_done > bytes_todo) {
tpqputs(TPQD_ALWAYS,
"write: Oops, wrote more bytes than requested");
tpqputs(TPQD_ALWAYS, "write: Oops, wrote more bytes than requested");
return -EIO;
}
/* If the dma-transfer was aborted because of an exception,
......@@ -2123,13 +2007,11 @@ static ssize_t qic02_tape_write(struct file *filp, const char *buf,
*/
if (status_error) {
if (status_eom_detected == YES) {
tpqputs(TPQD_ALWAYS,
"write: EW detected");
tpqputs(TPQD_ALWAYS, "write: EW detected");
return_write_eof = YES;
} else {
/* probably EXC_RWA */
tpqputs(TPQD_ALWAYS,
"write: dma: error in writing");
tpqputs(TPQD_ALWAYS, "write: dma: error in writing");
return -EIO;
}
}
......@@ -2193,8 +2075,7 @@ static int qic02_tape_open_no_use_count(struct inode *inode,
if (TP_DIAGS(dev)) {
printk("qic02_tape_open: dev=%s, flags=%x ",
kdevname(dev), flags);
printk("qic02_tape_open: dev=%s, flags=%x ", kdevname(dev), flags);
}
if (minor(dev) == 255) { /* special case for resetting */
......@@ -2210,10 +2091,8 @@ static int qic02_tape_open_no_use_count(struct inode *inode,
return 0;
}
/* Only one at a time from here on... */
if (file_count(filp) > 1) { /* filp->f_count==1 for the first open() */
if(test_and_set_bit(0, &tape_open))
return -EBUSY;
}
if (status_zombie == YES) {
/* no irq/dma/port stuff allocated yet, no reset done
......@@ -2256,13 +2135,13 @@ static int qic02_tape_open_no_use_count(struct inode *inode,
if (s == TE_OK) {
/* Try to clear cartridge-changed status for Archive-2150L */
if ((tperror.exs & TP_ST0) && (tperror.exs & TP_CNI)) {
s = tp_sense(TP_WRP | TP_EOM | TP_BOM | TP_CNI |
TP_EOR);
s = tp_sense(TP_WRP | TP_EOM | TP_BOM | TP_CNI | TP_EOR);
}
}
if (s != TE_OK) {
tpqputs(TPQD_ALWAYS, "open: sense() failed");
clear_bit(0, &tape_open);
return -EIO;
}
......@@ -2272,6 +2151,7 @@ static int qic02_tape_open_no_use_count(struct inode *inode,
*/
if ((tperror.exs & TP_ST0) && (tperror.exs & TP_CNI)) {
tpqputs(TPQD_ALWAYS, "No tape present.");
clear_bit(0, &tape_open);
return -EIO;
}
......@@ -2280,15 +2160,13 @@ static int qic02_tape_open_no_use_count(struct inode *inode,
*/
/* not allowed to do QCMD_DENS_* unless tape is rewound */
if ((TP_DENS(dev) != 0)
&& (TP_DENS(current_tape_dev) != TP_DENS(dev))) {
if ((TP_DENS(dev) != 0) && (TP_DENS(current_tape_dev) != TP_DENS(dev))) {
/* force rewind if minor bits have changed,
* i.e. user wants to use tape in different format.
* [assuming single drive operation]
*/
if (TP_HAVE_DENS) {
tpqputs(TPQD_REWIND,
"Density minor bits have changed. Forcing rewind.");
tpqputs(TPQD_REWIND, "Density minor bits have changed. Forcing rewind.");
need_rewind = YES;
}
} else {
......@@ -2318,8 +2196,7 @@ static int qic02_tape_open_no_use_count(struct inode *inode,
} else {
status_dead = NO;
if (tp_sense(~(TP_ST1 | TP_ILL)) != TE_OK) {
tpqputs(TPQD_ALWAYS,
"open: tp_sense() failed\n");
tpqputs(TPQD_ALWAYS, "open: tp_sense() failed\n");
status_dead = YES; /* try reset next time */
return -EIO;
}
......@@ -2343,12 +2220,10 @@ static int qic02_tape_open_no_use_count(struct inode *inode,
dens = TP_DENS(dev);
}
if (dens < sizeof(format_names) / sizeof(char *)) {
printk(TPQIC02_NAME ": format: %s%s\n",
(dens != 0) ? "QIC-" : "", format_names[dens]);
} else {
if (dens < sizeof(format_names) / sizeof(char *))
printk(TPQIC02_NAME ": format: %s%s\n", (dens != 0) ? "QIC-" : "", format_names[dens]);
else
tpqputs(TPQD_REWIND, "Wait for retensioning...");
}
switch (TP_DENS(dev)) {
case 0: /* Minor 0 is for drives without set-density support */
......@@ -2406,12 +2281,12 @@ static int qic02_tape_release(struct inode *inode, struct file *filp)
/* Rewind only if minor number requires it AND
* read/writes have been done. ************* IS THIS CORRECT??????????
*/
if ((TP_REWCLOSE(dev))
&& (status_bytes_rd | status_bytes_wr)) {
if ((TP_REWCLOSE(dev)) && (status_bytes_rd | status_bytes_wr)) {
tpqputs(TPQD_REWIND, "release: Doing rewind...");
(void) do_qic_cmd(QCMD_REWIND, TIM_R);
}
}
clear_bit(0, &tape_open);
return 0;
} /* qic02_tape_release */
......@@ -2512,47 +2387,32 @@ static int update_ifc_masks(int ifc)
/* ioctl allows user programs to rewind the tape and stuff like that */
static int qic02_tape_ioctl(struct inode *inode, struct file *filp,
unsigned int iocmd, unsigned long ioarg)
static int qic02_tape_ioctl(struct inode *inode, struct file *filp, unsigned int iocmd, unsigned long ioarg)
{
int error;
int dev_maj = major(inode->i_rdev);
int c;
struct mtop operation;
unsigned char blk_addr[6];
struct mtpos ioctl_tell;
if (TP_DIAGS(current_tape_dev)) {
printk(TPQIC02_NAME ": ioctl(%4x, %4x, %4lx)\n", dev_maj,
iocmd, ioarg);
}
if (TP_DIAGS(current_tape_dev))
printk(TPQIC02_NAME ": ioctl(%4x, %4lx)\n", iocmd, ioarg);
if (!inode || !ioarg) {
if (!inode)
return -EINVAL;
}
/* check iocmd first */
if (dev_maj != QIC02_TAPE_MAJOR) {
printk(TPQIC02_NAME ": Oops! Wrong device?\n");
/* A panic() would be appropriate here */
return -ENODEV;
}
c = _IOC_NR(iocmd);
#ifdef CONFIG_QIC02_DYNCONF
if (c == _IOC_NR(MTIOCGETCONFIG)) {
CHECK_IOC_SIZE(mtconfiginfo);
if (copy_to_user
((char *) ioarg, (char *) &qic02_tape_dynconf,
sizeof(qic02_tape_dynconf))) {
if (copy_to_user((char *) ioarg, (char *) &qic02_tape_dynconf, sizeof(qic02_tape_dynconf)))
return -EFAULT;
}
return 0;
} else if (c == _IOC_NR(MTIOCSETCONFIG)) {
/* One should always do a MTIOCGETCONFIG first, then update
* user-settings, then write back with MTIOCSETCONFIG.
......@@ -2562,24 +2422,19 @@ static int qic02_tape_ioctl(struct inode *inode, struct file *filp,
CHECK_IOC_SIZE(mtconfiginfo);
if (!capable(CAP_SYS_ADMIN)) {
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
}
if ((doing_read != NO) || (doing_write != NO)) {
if (doing_read != NO || doing_write != NO)
return -EBUSY;
}
if (status_zombie == NO) {
if (status_zombie == NO)
qic02_release_resources(); /* and go zombie */
}
/* copy struct from user space to kernel space */
if (copy_from_user
((char *) &qic02_tape_dynconf, (char *) ioarg,
sizeof(qic02_tape_dynconf))) {
if (copy_from_user((char *) &qic02_tape_dynconf, (char *) ioarg, sizeof(qic02_tape_dynconf)))
return -EFAULT;
}
return update_ifc_masks(qic02_tape_dynconf.ifc_type);
}
if (status_zombie == YES) {
......@@ -2591,11 +2446,8 @@ static int qic02_tape_ioctl(struct inode *inode, struct file *filp,
CHECK_IOC_SIZE(mtop);
/* copy mtop struct from user space to kernel space */
if (copy_from_user
((char *) &operation, (char *) ioarg,
sizeof(operation))) {
if (copy_from_user((char *) &operation, (char *) ioarg, sizeof(operation)))
return -EFAULT;
}
/* ---note: mt_count is signed, negative seeks must be
* --- translated to seeks in opposite direction!
......@@ -2605,42 +2457,32 @@ static int qic02_tape_ioctl(struct inode *inode, struct file *filp,
* --- tape at the beginning of the current file.
*/
if (TP_DIAGS(current_tape_dev)) {
printk("OP op=%4x, count=%4x\n", operation.mt_op,
operation.mt_count);
}
if (TP_DIAGS(current_tape_dev))
printk("OP op=%4x, count=%4x\n", operation.mt_op, operation.mt_count);
if (operation.mt_count < 0) {
tpqputs(TPQD_ALWAYS,
"Warning: negative mt_count ignored");
}
if (operation.mt_count < 0)
tpqputs(TPQD_ALWAYS, "Warning: negative mt_count ignored");
ioctl_status.mt_resid = operation.mt_count;
if (operation.mt_op == MTSEEK) {
if (!TP_HAVE_SEEK) {
if (!TP_HAVE_SEEK)
return -ENOTTY;
}
seek_addr_buf[0] =
(operation.mt_count >> 16) & 0xff;
seek_addr_buf[1] =
(operation.mt_count >> 8) & 0xff;
seek_addr_buf[0] = (operation.mt_count >> 16) & 0xff;
seek_addr_buf[1] = (operation.mt_count >> 8) & 0xff;
seek_addr_buf[2] = (operation.mt_count) & 0xff;
if (operation.mt_count >> 24) {
if (operation.mt_count >> 24)
return -EINVAL;
}
if ((error = do_ioctl_cmd(operation.mt_op)) != 0) {
if ((error = do_ioctl_cmd(operation.mt_op)) != 0)
return error;
}
ioctl_status.mt_resid = 0;
} else {
while (operation.mt_count > 0) {
operation.mt_count--;
if ((error =
do_ioctl_cmd(operation.mt_op)) != 0) {
if ((error = do_ioctl_cmd(operation.mt_op)) != 0)
return error;
}
ioctl_status.mt_resid = operation.mt_count;
}
......@@ -2648,9 +2490,8 @@ static int qic02_tape_ioctl(struct inode *inode, struct file *filp,
return 0;
} else if (c == _IOC_NR(MTIOCGET)) {
if (TP_DIAGS(current_tape_dev)) {
if (TP_DIAGS(current_tape_dev))
printk("GET ");
}
CHECK_IOC_SIZE(mtget);
......@@ -2660,55 +2501,75 @@ static int qic02_tape_ioctl(struct inode *inode, struct file *filp,
*/
/* copy results to user space */
if (copy_to_user
((char *) ioarg, (char *) &ioctl_status,
sizeof(ioctl_status))) {
if (copy_to_user((char *) ioarg, (char *) &ioctl_status, sizeof(ioctl_status)))
return -EFAULT;
}
return 0;
} else if (TP_HAVE_TELL && (c == _IOC_NR(MTIOCPOS))) {
if (TP_DIAGS(current_tape_dev)) {
if (TP_DIAGS(current_tape_dev))
printk("POS ");
}
CHECK_IOC_SIZE(mtpos);
tpqputs(TPQD_IOCTLS, "MTTELL reading block address");
if ((doing_read == YES) || (doing_write == YES)) {
if (doing_read == YES || doing_write == YES)
finish_rw(AR_QCMDV_TELL_BLK);
}
c = rdstatus((char *) blk_addr, sizeof(blk_addr),
AR_QCMDV_TELL_BLK);
if (c != TE_OK) {
c = rdstatus((char *) blk_addr, sizeof(blk_addr), AR_QCMDV_TELL_BLK);
if (c != TE_OK)
return -EIO;
}
ioctl_tell.mt_blkno =
(blk_addr[3] << 16) | (blk_addr[4] << 8) | blk_addr[5];
ioctl_tell.mt_blkno = (blk_addr[3] << 16) | (blk_addr[4] << 8) | blk_addr[5];
/* copy results to user space */
if (copy_to_user
((char *) ioarg, (char *) &ioctl_tell,
sizeof(ioctl_tell))) {
if (copy_to_user((char *) ioarg, (char *) &ioctl_tell, sizeof(ioctl_tell)))
return -EFAULT;
}
return 0;
} else {
} else
return -ENOTTY; /* Other cmds not supported. */
}
} /* qic02_tape_ioctl */
static ssize_t qic02_do_tape_read(struct file *filp, char *buf, size_t count, loff_t * ppos)
{
int err;
down(&tape_op);
err = qic02_tape_read(filp, buf, count, ppos);
up(&tape_op);
return err;
}
static ssize_t qic02_do_tape_write(struct file *filp, const char *buf, size_t count, loff_t * ppos)
{
int err;
down(&tape_op);
err = qic02_tape_write(filp, buf, count, ppos);
up(&tape_op);
return err;
}
static int qic02_do_tape_ioctl(struct inode *inode, struct file *filp, unsigned int iocmd, unsigned long ioarg)
{
int err;
down(&tape_op);
err = qic02_tape_ioctl(inode, filp, iocmd, ioarg);
up(&tape_op);
return err;
}
/* These are (most) of the interface functions: */
static struct file_operations qic02_tape_fops = {
owner:THIS_MODULE,
llseek:no_llseek,
read:qic02_tape_read,
write:qic02_tape_write,
ioctl:qic02_tape_ioctl,
read:qic02_do_tape_read,
write:qic02_do_tape_write,
ioctl:qic02_do_tape_ioctl,
open:qic02_tape_open,
release:qic02_tape_release,
};
......@@ -2719,10 +2580,8 @@ static void qic02_release_resources(void)
free_irq(QIC02_TAPE_IRQ, NULL);
free_dma(QIC02_TAPE_DMA);
release_region(QIC02_TAPE_PORT, QIC02_TAPE_PORT_RANGE);
if (buffaddr) {
free_pages((unsigned long) buffaddr,
get_order(TPQBUF_SIZE));
}
if (buffaddr)
free_pages((unsigned long) buffaddr, get_order(TPQBUF_SIZE));
buffaddr = 0; /* Better to cause a panic than overwite someone else */
status_zombie = YES;
} /* qic02_release_resources */
......@@ -2733,49 +2592,35 @@ static int qic02_get_resources(void)
/* First perform some checks. If one of them fails,
* the tape driver will not be registered to the system.
*/
if (QIC02_TAPE_IRQ > 16) {
tpqputs(TPQD_ALWAYS, "Bogus interrupt number.");
return -ENXIO;
}
/* for DYNCONF, allocating IO, DMA and IRQ should not be done until
* the config parameters have been set using MTSETCONFIG.
*/
/* Grab the IO region. */
if (!request_region(QIC02_TAPE_PORT, QIC02_TAPE_PORT_RANGE,
TPQIC02_NAME)) {
printk(TPQIC02_NAME
": IO space at 0x%x [%d ports] already reserved\n",
if (!request_region(QIC02_TAPE_PORT, QIC02_TAPE_PORT_RANGE, TPQIC02_NAME)) {
printk(TPQIC02_NAME ": IO space at 0x%x [%d ports] already reserved\n",
QIC02_TAPE_PORT, QIC02_TAPE_PORT_RANGE);
return -ENXIO;
}
/* get IRQ */
if (request_irq
(QIC02_TAPE_IRQ, qic02_tape_interrupt, SA_INTERRUPT, "QIC-02",
NULL)) {
printk(TPQIC02_NAME
": can't allocate IRQ%d for QIC-02 tape\n",
QIC02_TAPE_IRQ);
if (request_irq(QIC02_TAPE_IRQ, qic02_tape_interrupt, SA_INTERRUPT, "QIC-02", NULL)) {
printk(TPQIC02_NAME ": can't allocate IRQ%d for QIC-02 tape\n", QIC02_TAPE_IRQ);
release_region(QIC02_TAPE_PORT, QIC02_TAPE_PORT_RANGE);
return -EBUSY;
}
/* After IRQ, allocate DMA channel */
if (request_dma(QIC02_TAPE_DMA, "QIC-02")) {
printk(TPQIC02_NAME
": can't allocate DMA%d for QIC-02 tape\n",
QIC02_TAPE_DMA);
printk(TPQIC02_NAME ": can't allocate DMA%d for QIC-02 tape\n", QIC02_TAPE_DMA);
free_irq(QIC02_TAPE_IRQ, NULL);
release_region(QIC02_TAPE_PORT, QIC02_TAPE_PORT_RANGE);
return -EBUSY;
}
/* Setup the page-address for the dma transfer. */
buffaddr =
(void *) __get_dma_pages(GFP_KERNEL, get_order(TPQBUF_SIZE));
buffaddr = (void *) __get_dma_pages(GFP_KERNEL, get_order(TPQBUF_SIZE));
if (!buffaddr) {
qic02_release_resources();
return -EBUSY; /* Not ideal, EAGAIN perhaps? */
......@@ -2783,8 +2628,7 @@ static int qic02_get_resources(void)
memset(buffaddr, 0, TPQBUF_SIZE);
printk(TPQIC02_NAME
": Settings: IRQ %d, DMA %d, IO 0x%x, IFC %s\n",
printk(TPQIC02_NAME ": Settings: IRQ %d, DMA %d, IO 0x%x, IFC %s\n",
QIC02_TAPE_IRQ, QIC02_TAPE_DMA, ((QIC02_TAPE_IFC == ARCHIVE)
|| (QIC02_TAPE_IFC ==
MOUNTAIN)) ?
......@@ -2794,11 +2638,9 @@ static int qic02_get_resources(void)
ARCHIVE) ? "Archive" :
"Wangtek"));
if (tape_reset(0) != TE_OK
|| tp_sense(TP_WRP | TP_POR | TP_CNI) != TE_OK) {
if (tape_reset(0) != TE_OK || tp_sense(TP_WRP | TP_POR | TP_CNI) != TE_OK) {
/* No drive detected, so vanish */
tpqputs(TPQD_ALWAYS,
"No drive detected -- releasing IO/IRQ/DMA.");
tpqputs(TPQD_ALWAYS, "No drive detected -- releasing IO/IRQ/DMA.");
status_dead = YES;
qic02_release_resources();
return -EIO;
......@@ -2812,13 +2654,11 @@ static int qic02_get_resources(void)
int __init qic02_tape_init(void)
{
if (TPSTATSIZE != 6) {
printk(TPQIC02_NAME
": internal error: tpstatus struct incorrect!\n");
printk(TPQIC02_NAME ": internal error: tpstatus struct incorrect!\n");
return -ENODEV;
}
if ((TPQBUF_SIZE < 512) || (TPQBUF_SIZE >= 0x10000)) {
printk(TPQIC02_NAME
": internal error: DMA buffer size out of range\n");
printk(TPQIC02_NAME ": internal error: DMA buffer size out of range\n");
return -ENODEV;
}
......@@ -2837,19 +2677,16 @@ int __init qic02_tape_init(void)
# error
# endif
rcs_revision, rcs_date);
if (qic02_get_resources()) {
if (qic02_get_resources())
return -ENODEV;
}
#else
printk(TPQIC02_NAME ": Runtime config, %s, %s\n",
rcs_revision, rcs_date);
printk(TPQIC02_NAME ": Runtime config, %s, %s\n", rcs_revision, rcs_date);
#endif
printk(TPQIC02_NAME ": DMA buffers: %u blocks\n", NR_BLK_BUF);
/* If we got this far, install driver functions */
if (register_chrdev
(QIC02_TAPE_MAJOR, TPQIC02_NAME, &qic02_tape_fops)) {
printk(TPQIC02_NAME ": Unable to get chrdev major %d\n",
QIC02_TAPE_MAJOR);
if (register_chrdev(QIC02_TAPE_MAJOR, TPQIC02_NAME, &qic02_tape_fops))
{
printk(TPQIC02_NAME ": Unable to get chrdev major %d\n", QIC02_TAPE_MAJOR);
#ifndef CONFIG_QIC02_DYNCONF
qic02_release_resources();
#endif
......@@ -2894,11 +2731,9 @@ int __init qic02_tape_init(void)
tp_timer.function = qic02_tape_times_out;
#ifndef CONFIG_QIC02_DYNCONF
if (tape_reset(0) != TE_OK
|| tp_sense(TP_WRP | TP_POR | TP_CNI) != TE_OK) {
if (tape_reset(0) != TE_OK || tp_sense(TP_WRP | TP_POR | TP_CNI) != TE_OK) {
/* No drive detected, so vanish */
tpqputs(TPQD_ALWAYS,
"No drive detected -- driver going on vacation...");
tpqputs(TPQD_ALWAYS, "No drive detected -- driver going on vacation...");
qic02_release_resources();
status_dead = YES;
return -ENODEV;
......@@ -2927,10 +2762,10 @@ int __init qic02_tape_init(void)
void cleanup_module(void)
{
if (status_zombie == NO) {
qic02_release_resources();
}
unregister_chrdev(QIC02_TAPE_MAJOR, TPQIC02_NAME);
if (status_zombie == NO)
qic02_release_resources();
devfs_find_and_unregister(NULL, "ntpqic11", QIC02_TAPE_MAJOR, 2,
DEVFS_SPECIAL_CHR, 0);
devfs_find_and_unregister(NULL, "tpqic11", QIC02_TAPE_MAJOR, 3,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7