Commit a29de31b authored by Chunfeng Yun's avatar Chunfeng Yun Committed by Greg Kroah-Hartman

usb: mtu3: Super-Speed Peripheral mode support

add super-speed funtion for peripheral mode
Signed-off-by: default avatarChunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent df2069ac
......@@ -53,6 +53,7 @@ struct mtu3_request;
#define USB_QMU_TQSAR(epnum) (U3D_TXQSAR1 + (((epnum) - 1) * 0x10))
#define USB_QMU_TQCPR(epnum) (U3D_TXQCPR1 + (((epnum) - 1) * 0x10))
#define SSUSB_U3_CTRL(p) (U3D_SSUSB_U3_CTRL_0P + ((p) * 0x08))
#define SSUSB_U2_CTRL(p) (U3D_SSUSB_U2_CTRL_0P + ((p) * 0x08))
#define MTU3_DRIVER_NAME "mtu3"
......@@ -63,6 +64,7 @@ struct mtu3_request;
#define MTU3_EP_WEDGE BIT(2)
#define MTU3_EP_BUSY BIT(3)
#define MTU3_U3_IP_SLOT_DEFAULT 2
#define MTU3_U2_IP_SLOT_DEFAULT 1
/**
......@@ -87,6 +89,7 @@ enum mtu3_speed {
MTU3_SPEED_INACTIVE = 0,
MTU3_SPEED_FULL = 1,
MTU3_SPEED_HIGH = 3,
MTU3_SPEED_SUPER = 4,
};
/**
......@@ -190,6 +193,7 @@ struct mtu3_ep {
struct list_head req_list;
struct mtu3_gpd_ring gpd_ring;
const struct usb_ss_ep_comp_descriptor *comp_desc;
const struct usb_endpoint_descriptor *desc;
int flags;
......@@ -208,7 +212,8 @@ struct mtu3_request {
/**
* struct mtu3 - device driver instance data.
* @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP
* @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP only,
* MTU3_U3_IP_SLOT_DEFAULT for U3 IP
* @may_wakeup: means device's remote wakeup is enabled
* @is_self_powered: is reported in device status and the config descriptor
* @ep0_req: dummy request used while handling standard USB requests
......@@ -242,12 +247,16 @@ struct mtu3 {
struct usb_gadget_driver *gadget_driver;
struct mtu3_request ep0_req;
u8 setup_buf[EP0_RESPONSE_BUF];
u32 max_speed;
unsigned is_active:1;
unsigned may_wakeup:1;
unsigned is_self_powered:1;
unsigned test_mode:1;
unsigned softconnect:1;
unsigned u1_enable:1;
unsigned u2_enable:1;
unsigned is_u3_ip:1;
u8 address;
u8 test_mode_nr;
......@@ -324,7 +333,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set);
void mtu3_ep0_setup(struct mtu3 *mtu);
void mtu3_start(struct mtu3 *mtu);
void mtu3_stop(struct mtu3 *mtu);
void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable);
void mtu3_dev_on_off(struct mtu3 *mtu, int is_on);
int mtu3_gadget_setup(struct mtu3 *mtu);
void mtu3_gadget_cleanup(struct mtu3 *mtu);
......
......@@ -72,8 +72,20 @@ static void ep_fifo_free(struct mtu3_ep *mep)
__func__, mep->fifo_seg_size, mep->fifo_size, start_bit);
}
/* enable/disable U3D SS function */
static inline void mtu3_ss_func_set(struct mtu3 *mtu, bool enable)
{
/* If usb3_en==0, LTSSM will go to SS.Disable state */
if (enable)
mtu3_setbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
else
mtu3_clrbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
dev_dbg(mtu->dev, "USB3_EN = %d\n", !!enable);
}
/* set/clear U3D HS device soft connect */
void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable)
static inline void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable)
{
if (enable) {
mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT,
......@@ -92,6 +104,13 @@ static int mtu3_device_enable(struct mtu3 *mtu)
u32 check_clk = 0;
mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
if (mtu->is_u3_ip) {
check_clk = SSUSB_U3_MAC_RST_B_STS;
mtu3_clrbits(ibase, SSUSB_U3_CTRL(0),
(SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN |
SSUSB_U3_PORT_HOST_SEL));
}
mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),
(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
SSUSB_U2_PORT_HOST_SEL));
......@@ -104,6 +123,10 @@ static void mtu3_device_disable(struct mtu3 *mtu)
{
void __iomem *ibase = mtu->ippc_base;
if (mtu->is_u3_ip)
mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
(SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN));
mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
......@@ -142,6 +165,9 @@ static void mtu3_intr_status_clear(struct mtu3 *mtu)
/* Clear U2 USB common interrupts status */
mtu3_writel(mbase, U3D_COMMON_USB_INTR, ~0x0);
/* Clear U3 LTSSM interrupts status */
mtu3_writel(mbase, U3D_LTSSM_INTR, ~0x0);
/* Clear speed change interrupt status */
mtu3_writel(mbase, U3D_DEV_LINK_INTR, ~0x0);
}
......@@ -153,13 +179,20 @@ static void mtu3_intr_enable(struct mtu3 *mtu)
u32 value;
/*Enable level 1 interrupts (BMU, QMU, MAC3, DMA, MAC2, EPCTL) */
value = BMU_INTR | QMU_INTR | MAC2_INTR | EP_CTRL_INTR;
value = BMU_INTR | QMU_INTR | MAC3_INTR | MAC2_INTR | EP_CTRL_INTR;
mtu3_writel(mbase, U3D_LV1IESR, value);
/* Enable U2 common USB interrupts */
value = SUSPEND_INTR | RESUME_INTR | RESET_INTR;
mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value);
if (mtu->is_u3_ip) {
/* Enable U3 LTSSM interrupts */
value = HOT_RST_INTR | WARM_RST_INTR | VBUS_RISE_INTR |
VBUS_FALL_INTR | ENTER_U3_INTR | EXIT_U3_INTR;
mtu3_writel(mbase, U3D_LTSSM_INTR_ENABLE, value);
}
/* Enable QMU interrupts. */
value = TXQ_CSERR_INT | TXQ_LENERR_INT | RXQ_CSERR_INT |
RXQ_LENERR_INT | RXQ_ZLPERR_INT;
......@@ -205,6 +238,17 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
set ? "SEND STALL" : "CLEAR STALL, with EP RESET");
}
void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
{
if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER))
mtu3_ss_func_set(mtu, is_on);
else
mtu3_hs_softconn_set(mtu, is_on);
dev_info(mtu->dev, "gadget (%s) pullup D%s\n",
usb_speed_string(mtu->max_speed), is_on ? "+" : "-");
}
void mtu3_start(struct mtu3 *mtu)
{
void __iomem *mbase = mtu->mac_base;
......@@ -214,13 +258,21 @@ void mtu3_start(struct mtu3 *mtu)
mtu3_clrbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
/*
* When disable U2 port, USB2_CSR's register will be reset to
* default value after re-enable it again(HS is enabled by default).
* So if force mac to work as FS, disable HS function.
*/
if (mtu->max_speed == USB_SPEED_FULL)
mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
/* Initialize the default interrupts */
mtu3_intr_enable(mtu);
mtu->is_active = 1;
if (mtu->softconnect)
mtu3_hs_softconn_set(mtu, 1);
mtu3_dev_on_off(mtu, 1);
}
void mtu3_stop(struct mtu3 *mtu)
......@@ -231,7 +283,7 @@ void mtu3_stop(struct mtu3 *mtu)
mtu3_intr_status_clear(mtu);
if (mtu->softconnect)
mtu3_hs_softconn_set(mtu, 0);
mtu3_dev_on_off(mtu, 0);
mtu->is_active = 0;
mtu3_setbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
......@@ -362,7 +414,10 @@ void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep)
}
/*
* 1. when supports only HS, the fifo is shared for all EPs, and
* Two scenarios:
* 1. when device IP supports SS, the fifo of EP0, TX EPs, RX EPs
* are separated;
* 2. when supports only HS, the fifo is shared for all EPs, and
* the capability registers of @EPNTXFFSZ or @EPNRXFFSZ indicate
* the total fifo size of non-ep0, and ep0's is fixed to 64B,
* so the total fifo size is 64B + @EPNTXFFSZ;
......@@ -376,18 +431,33 @@ static void get_ep_fifo_config(struct mtu3 *mtu)
struct mtu3_fifo_info *rx_fifo;
u32 fifosize;
fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
tx_fifo = &mtu->tx_fifo;
tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE;
tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1;
bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
rx_fifo = &mtu->rx_fifo;
rx_fifo->base =
tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT;
rx_fifo->limit = tx_fifo->limit;
bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
mtu->slot = MTU3_U2_IP_SLOT_DEFAULT;
if (mtu->is_u3_ip) {
fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
tx_fifo = &mtu->tx_fifo;
tx_fifo->base = 0;
tx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;
bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNRXFFSZ);
rx_fifo = &mtu->rx_fifo;
rx_fifo->base = 0;
rx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;
bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
mtu->slot = MTU3_U3_IP_SLOT_DEFAULT;
} else {
fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
tx_fifo = &mtu->tx_fifo;
tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE;
tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1;
bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
rx_fifo = &mtu->rx_fifo;
rx_fifo->base =
tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT;
rx_fifo->limit = tx_fifo->limit;
bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
mtu->slot = MTU3_U2_IP_SLOT_DEFAULT;
}
dev_dbg(mtu->dev, "%s, TX: base-%d, limit-%d; RX: base-%d, limit-%d\n",
__func__, tx_fifo->base, tx_fifo->limit,
......@@ -416,17 +486,21 @@ static int mtu3_mem_alloc(struct mtu3 *mtu)
void __iomem *mbase = mtu->mac_base;
struct mtu3_ep *ep_array;
int in_ep_num, out_ep_num;
u32 cap_epinfo;
u32 cap_epinfo, cap_dev;
int ret;
int i;
mtu->hw_version = mtu3_readl(mtu->ippc_base, U3D_SSUSB_HW_ID);
cap_dev = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP);
mtu->is_u3_ip = !!SSUSB_IP_DEV_U3_PORT_NUM(cap_dev);
cap_epinfo = mtu3_readl(mbase, U3D_CAP_EPINFO);
in_ep_num = CAP_TX_EP_NUM(cap_epinfo);
out_ep_num = CAP_RX_EP_NUM(cap_epinfo);
dev_info(mtu->dev, "IP version 0x%x\n", mtu->hw_version);
dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version,
mtu->is_u3_ip ? "U3" : "U2");
dev_info(mtu->dev, "fifosz/epnum: Tx=%#x/%d, Rx=%#x/%d\n",
mtu3_readl(mbase, U3D_CAP_EPNTXFFSZ), in_ep_num,
mtu3_readl(mbase, U3D_CAP_EPNRXFFSZ), out_ep_num);
......@@ -469,6 +543,27 @@ static void mtu3_mem_free(struct mtu3 *mtu)
kfree(mtu->ep_array);
}
static void mtu3_set_speed(struct mtu3 *mtu)
{
void __iomem *mbase = mtu->mac_base;
if (!mtu->is_u3_ip && (mtu->max_speed > USB_SPEED_HIGH))
mtu->max_speed = USB_SPEED_HIGH;
if (mtu->max_speed == USB_SPEED_FULL) {
/* disable U3 SS function */
mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
/* disable HS function */
mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
} else if (mtu->max_speed == USB_SPEED_HIGH) {
mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
/* HS/FS detected by HW */
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
}
dev_info(mtu->dev, "max_speed: %s\n",
usb_speed_string(mtu->max_speed));
}
static void mtu3_regs_init(struct mtu3 *mtu)
{
......@@ -478,9 +573,16 @@ static void mtu3_regs_init(struct mtu3 *mtu)
mtu3_intr_disable(mtu);
mtu3_intr_status_clear(mtu);
mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
/* HS/FS detected by HW */
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
if (mtu->is_u3_ip) {
/* disable LGO_U1/U2 by default */
mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL,
SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE |
SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);
/* device responses to u3_exit from host automatically */
mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);
}
mtu3_set_speed(mtu);
/* delay about 0.1us from detecting reset to send chirp-K */
mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK);
......@@ -530,6 +632,10 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT,
LPM_BESL_STALL | LPM_BESLD_STALL);
break;
case MTU3_SPEED_SUPER:
udev_speed = USB_SPEED_SUPER;
maxpkt = 512;
break;
default:
udev_speed = USB_SPEED_UNKNOWN;
break;
......@@ -548,6 +654,34 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
return IRQ_HANDLED;
}
static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu)
{
void __iomem *mbase = mtu->mac_base;
u32 ltssm;
ltssm = mtu3_readl(mbase, U3D_LTSSM_INTR);
ltssm &= mtu3_readl(mbase, U3D_LTSSM_INTR_ENABLE);
mtu3_writel(mbase, U3D_LTSSM_INTR, ltssm); /* W1C */
dev_dbg(mtu->dev, "=== LTSSM[%x] ===\n", ltssm);
if (ltssm & (HOT_RST_INTR | WARM_RST_INTR))
mtu3_gadget_reset(mtu);
if (ltssm & VBUS_FALL_INTR)
mtu3_ss_func_set(mtu, false);
if (ltssm & VBUS_RISE_INTR)
mtu3_ss_func_set(mtu, true);
if (ltssm & EXIT_U3_INTR)
mtu3_gadget_resume(mtu);
if (ltssm & ENTER_U3_INTR)
mtu3_gadget_suspend(mtu);
return IRQ_HANDLED;
}
static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)
{
void __iomem *mbase = mtu->mac_base;
......@@ -588,6 +722,9 @@ irqreturn_t mtu3_irq(int irq, void *data)
if (level1 & MAC2_INTR)
mtu3_u2_common_isr(mtu);
if (level1 & MAC3_INTR)
mtu3_u3_ltssm_isr(mtu);
if (level1 & BMU_INTR)
mtu3_ep0_isr(mtu);
......@@ -633,6 +770,27 @@ int ssusb_gadget_init(struct mtu3 *mtu)
struct device *dev = mtu->dev;
int ret;
mtu->max_speed = usb_get_maximum_speed(dev);
/* check the max_speed parameter */
switch (mtu->max_speed) {
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
case USB_SPEED_SUPER:
break;
default:
dev_err(dev, "invalid max_speed: %s\n",
usb_speed_string(mtu->max_speed));
/* fall through */
case USB_SPEED_UNKNOWN:
/* default as SS */
mtu->max_speed = USB_SPEED_SUPER;
break;
}
dev_dbg(dev, "mac_base=0x%p, ippc_base=0x%p\n",
mtu->mac_base, mtu->ippc_base);
ret = mtu3_hw_init(mtu);
if (ret) {
dev_err(dev, "mtu3 hw init failed:%d\n", ret);
......
......@@ -73,6 +73,7 @@ static void nuke(struct mtu3_ep *mep, const int status)
static int mtu3_ep_enable(struct mtu3_ep *mep)
{
const struct usb_endpoint_descriptor *desc;
const struct usb_ss_ep_comp_descriptor *comp_desc;
struct mtu3 *mtu = mep->mtu;
u32 interval = 0;
u32 mult = 0;
......@@ -81,11 +82,24 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
int ret;
desc = mep->desc;
comp_desc = mep->comp_desc;
mep->type = usb_endpoint_type(desc);
max_packet = usb_endpoint_maxp(desc);
mep->maxp = max_packet & GENMASK(10, 0);
switch (mtu->g.speed) {
case USB_SPEED_SUPER:
if (usb_endpoint_xfer_int(desc) ||
usb_endpoint_xfer_isoc(desc)) {
interval = desc->bInterval;
interval = clamp_val(interval, 1, 16) - 1;
if (usb_endpoint_xfer_isoc(desc) && comp_desc)
mult = comp_desc->bmAttributes;
}
if (comp_desc)
burst = comp_desc->bMaxBurst;
break;
case USB_SPEED_HIGH:
if (usb_endpoint_xfer_isoc(desc) ||
usb_endpoint_xfer_int(desc)) {
......@@ -103,6 +117,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
mep->ep.maxpacket = mep->maxp;
mep->ep.desc = desc;
mep->ep.comp_desc = comp_desc;
/* slot mainly affects bulk/isoc transfer, so ignore int */
mep->slot = usb_endpoint_xfer_int(desc) ? 0 : mtu->slot;
......@@ -135,6 +150,7 @@ static int mtu3_ep_disable(struct mtu3_ep *mep)
mep->desc = NULL;
mep->ep.desc = NULL;
mep->comp_desc = NULL;
mep->type = 0;
mep->flags = 0;
......@@ -178,6 +194,7 @@ static int mtu3_gadget_ep_enable(struct usb_ep *ep,
spin_lock_irqsave(&mtu->lock, flags);
mep->desc = desc;
mep->comp_desc = ep->comp_desc;
ret = mtu3_ep_enable(mep);
if (ret)
......@@ -439,13 +456,15 @@ static int mtu3_gadget_wakeup(struct usb_gadget *gadget)
return -EOPNOTSUPP;
spin_lock_irqsave(&mtu->lock, flags);
mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
spin_unlock_irqrestore(&mtu->lock, flags);
usleep_range(10000, 11000);
spin_lock_irqsave(&mtu->lock, flags);
mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
if (mtu->g.speed == USB_SPEED_SUPER) {
mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT);
} else {
mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
spin_unlock_irqrestore(&mtu->lock, flags);
usleep_range(10000, 11000);
spin_lock_irqsave(&mtu->lock, flags);
mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
}
spin_unlock_irqrestore(&mtu->lock, flags);
return 0;
}
......@@ -476,7 +495,7 @@ static int mtu3_gadget_pullup(struct usb_gadget *gadget, int is_on)
mtu->softconnect = is_on;
} else if (is_on != mtu->softconnect) {
mtu->softconnect = is_on;
mtu3_hs_softconn_set(mtu, is_on);
mtu3_dev_on_off(mtu, is_on);
}
spin_unlock_irqrestore(&mtu->lock, flags);
......@@ -524,7 +543,7 @@ static void stop_activity(struct mtu3 *mtu)
/* deactivate the hardware */
if (mtu->softconnect) {
mtu->softconnect = 0;
mtu3_hs_softconn_set(mtu, 0);
mtu3_dev_on_off(mtu, 0);
}
/*
......@@ -587,14 +606,14 @@ static void init_hw_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
mep->ep.name = mep->name;
INIT_LIST_HEAD(&mep->ep.ep_list);
/* initialize maxpacket as HS */
/* initialize maxpacket as SS */
if (!epnum) {
usb_ep_set_maxpacket_limit(&mep->ep, 64);
usb_ep_set_maxpacket_limit(&mep->ep, 512);
mep->ep.caps.type_control = true;
mep->ep.ops = &mtu3_ep0_ops;
mtu->g.ep0 = &mep->ep;
} else {
usb_ep_set_maxpacket_limit(&mep->ep, 512);
usb_ep_set_maxpacket_limit(&mep->ep, 1024);
mep->ep.caps.type_iso = true;
mep->ep.caps.type_bulk = true;
mep->ep.caps.type_int = true;
......@@ -637,7 +656,7 @@ int mtu3_gadget_setup(struct mtu3 *mtu)
int ret;
mtu->g.ops = &mtu3_gadget_ops;
mtu->g.max_speed = USB_SPEED_HIGH;
mtu->g.max_speed = mtu->max_speed;
mtu->g.speed = USB_SPEED_UNKNOWN;
mtu->g.sg_supported = 0;
mtu->g.name = MTU3_DRIVER_NAME;
......
......@@ -161,6 +161,41 @@ static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq);
static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)
{}
static void ep0_set_sel_complete(struct usb_ep *ep, struct usb_request *req)
{
struct mtu3_request *mreq;
struct mtu3 *mtu;
struct usb_set_sel_req sel;
memcpy(&sel, req->buf, sizeof(sel));
mreq = to_mtu3_request(req);
mtu = mreq->mtu;
dev_dbg(mtu->dev, "u1sel:%d, u1pel:%d, u2sel:%d, u2pel:%d\n",
sel.u1_sel, sel.u1_pel, sel.u2_sel, sel.u2_pel);
}
/* queue data stage to handle 6 byte SET_SEL request */
static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
{
int ret;
u16 length = le16_to_cpu(setup->wLength);
if (unlikely(length != 6)) {
dev_err(mtu->dev, "%s wrong wLength:%d\n",
__func__, length);
return -EINVAL;
}
mtu->ep0_req.mep = mtu->ep0;
mtu->ep0_req.request.length = 6;
mtu->ep0_req.request.buf = mtu->setup_buf;
mtu->ep0_req.request.complete = ep0_set_sel_complete;
ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
return ret < 0 ? ret : 1;
}
static int
ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
{
......@@ -174,6 +209,15 @@ ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
case USB_RECIP_DEVICE:
result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
/* superspeed only */
if (mtu->g.speed == USB_SPEED_SUPER) {
result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
}
dev_dbg(mtu->dev, "%s result=%x, U1=%x, U2=%x\n", __func__,
result[0], mtu->u1_enable, mtu->u2_enable);
break;
case USB_RECIP_INTERFACE:
break;
......@@ -265,7 +309,9 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
static int ep0_handle_feature_dev(struct mtu3 *mtu,
struct usb_ctrlrequest *setup, bool set)
{
void __iomem *mbase = mtu->mac_base;
int handled = -EINVAL;
u32 lpc;
switch (le16_to_cpu(setup->wValue)) {
case USB_DEVICE_REMOTE_WAKEUP:
......@@ -279,6 +325,36 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
handled = handle_test_mode(mtu, setup);
break;
case USB_DEVICE_U1_ENABLE:
if (mtu->g.speed != USB_SPEED_SUPER ||
mtu->g.state != USB_STATE_CONFIGURED)
break;
lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
if (set)
lpc |= SW_U1_ACCEPT_ENABLE;
else
lpc &= ~SW_U1_ACCEPT_ENABLE;
mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
mtu->u1_enable = !!set;
handled = 1;
break;
case USB_DEVICE_U2_ENABLE:
if (mtu->g.speed != USB_SPEED_SUPER ||
mtu->g.state != USB_STATE_CONFIGURED)
break;
lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
if (set)
lpc |= SW_U2_ACCEPT_ENABLE;
else
lpc &= ~SW_U2_ACCEPT_ENABLE;
mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
mtu->u2_enable = !!set;
handled = 1;
break;
default:
handled = -EINVAL;
break;
......@@ -303,6 +379,17 @@ static int ep0_handle_feature(struct mtu3 *mtu,
case USB_RECIP_DEVICE:
handled = ep0_handle_feature_dev(mtu, setup, set);
break;
case USB_RECIP_INTERFACE:
/* superspeed only */
if ((value == USB_INTRF_FUNC_SUSPEND)
&& (mtu->g.speed == USB_SPEED_SUPER)) {
/*
* forward the request because function drivers
* should handle it
*/
handled = 0;
}
break;
case USB_RECIP_ENDPOINT:
epnum = index & USB_ENDPOINT_NUMBER_MASK;
if (epnum == 0 || epnum >= mtu->num_eps ||
......@@ -390,6 +477,9 @@ static int handle_standard_request(struct mtu3 *mtu,
case USB_REQ_GET_STATUS:
handled = ep0_get_status(mtu, setup);
break;
case USB_REQ_SET_SEL:
handled = ep0_set_sel(mtu, setup);
break;
case USB_REQ_SET_ISOCH_DELAY:
handled = 1;
break;
......
......@@ -260,13 +260,46 @@
/*---------------- SSUSB_USB3_MAC_CSR REGISTER DEFINITION ----------------*/
#define U3D_LTSSM_CTRL (SSUSB_USB3_MAC_CSR_BASE + 0x0010)
#define U3D_USB3_CONFIG (SSUSB_USB3_MAC_CSR_BASE + 0x001C)
#define U3D_LTSSM_INTR_ENABLE (SSUSB_USB3_MAC_CSR_BASE + 0x013C)
#define U3D_LTSSM_INTR (SSUSB_USB3_MAC_CSR_BASE + 0x0140)
/*---------------- SSUSB_USB3_MAC_CSR FIELD DEFINITION ----------------*/
/* U3D_LTSSM_CTRL */
#define FORCE_POLLING_FAIL BIT(4)
#define FORCE_RXDETECT_FAIL BIT(3)
#define SOFT_U3_EXIT_EN BIT(2)
#define COMPLIANCE_EN BIT(1)
#define U1_GO_U2_EN BIT(0)
/* U3D_USB3_CONFIG */
#define USB3_EN BIT(0)
/* U3D_LTSSM_INTR_ENABLE */
/* U3D_LTSSM_INTR */
#define U3_RESUME_INTR BIT(18)
#define U3_LFPS_TMOUT_INTR BIT(17)
#define VBUS_FALL_INTR BIT(16)
#define VBUS_RISE_INTR BIT(15)
#define RXDET_SUCCESS_INTR BIT(14)
#define EXIT_U3_INTR BIT(13)
#define EXIT_U2_INTR BIT(12)
#define EXIT_U1_INTR BIT(11)
#define ENTER_U3_INTR BIT(10)
#define ENTER_U2_INTR BIT(9)
#define ENTER_U1_INTR BIT(8)
#define ENTER_U0_INTR BIT(7)
#define RECOVERY_INTR BIT(6)
#define WARM_RST_INTR BIT(5)
#define HOT_RST_INTR BIT(4)
#define LOOPBACK_INTR BIT(3)
#define COMPLIANCE_INTR BIT(2)
#define SS_DISABLE_INTR BIT(1)
#define SS_INACTIVE_INTR BIT(0)
/*---------------- SSUSB_USB3_SYS_CSR REGISTER DEFINITION ----------------*/
#define U3D_LINK_UX_INACT_TIMER (SSUSB_USB3_SYS_CSR_BASE + 0x020C)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment