Skip to content

L
linux
Commit a32b9810 authored by Pekka Enberg's avatar Pekka Enberg Committed by Greg Kroah-Hartman
Browse files
Options

Staging: w35und: reformat wbusb.c 

Impact: cleanup

Use scripts/Lindent on the file and clean up the rest by hand.
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 9ca748ce
Hide whitespace changes
Inline Side-by-side
Showing with 270 additions and 293 deletions
drivers/staging/winbond/wbusb.c
View file @ a32b9810
......@@ -19,13 +19,13 @@ MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");
static struct usb_device_id wb35_table[] __devinitdata = {
{USB_DEVICE(0x0416, 0x0035)},
{USB_DEVICE(0x18E8, 0x6201)},
{USB_DEVICE(0x18E8, 0x6206)},
{USB_DEVICE(0x18E8, 0x6217)},
{USB_DEVICE(0x18E8, 0x6230)},
{USB_DEVICE(0x18E8, 0x6233)},
{USB_DEVICE(0x1131, 0x2035)},
{ USB_DEVICE(0x0416, 0x0035) },
{ USB_DEVICE(0x18E8, 0x6201) },
{ USB_DEVICE(0x18E8, 0x6206) },
{ USB_DEVICE(0x18E8, 0x6217) },
{ USB_DEVICE(0x18E8, 0x6230) },
{ USB_DEVICE(0x18E8, 0x6233) },
{ USB_DEVICE(0x1131, 0x2035) },
{ 0, }
};
......@@ -36,7 +36,7 @@ static struct ieee80211_rate wbsoft_rates[] = {
};
static struct ieee80211_channel wbsoft_channels[] = {
{ .center_freq = 2412},
{ .center_freq = 2412 },
};
static struct ieee80211_supported_band wbsoft_band_2GHz = {
......@@ -47,14 +47,14 @@ static struct ieee80211_supported_band wbsoft_band_2GHz = {
};
static int wbsoft_add_interface(struct ieee80211_hw *dev,
struct ieee80211_if_init_conf *conf)
struct ieee80211_if_init_conf *conf)
{
printk("wbsoft_add interface called\n");
return 0;
}
static void wbsoft_remove_interface(struct ieee80211_hw *dev,
struct ieee80211_if_init_conf *conf)
struct ieee80211_if_init_conf *conf)
{
printk("wbsoft_remove interface called\n");
}
......@@ -79,9 +79,9 @@ static int wbsoft_get_tx_stats(struct ieee80211_hw *hw,
}
static void wbsoft_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
int mc_count, struct dev_mc_list *mclist)
unsigned int changed_flags,
unsigned int *total_flags,
int mc_count, struct dev_mc_list *mclist)
{
unsigned int new_flags;
......@@ -106,7 +106,6 @@ static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
return NETDEV_TX_OK;
}
static int wbsoft_start(struct ieee80211_hw *dev)
{
struct wbsoft_priv *priv = dev->priv;
......@@ -131,17 +130,17 @@ static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
hal_set_current_channel(&priv->sHwData, ch);
hal_set_beacon_period(&priv->sHwData, conf->beacon_int);
hal_set_accept_broadcast(&priv->sHwData, 1);
hal_set_accept_promiscuous(&priv->sHwData, 1);
hal_set_accept_multicast(&priv->sHwData, 1);
hal_set_accept_beacon(&priv->sHwData, 1);
hal_set_radio_mode(&priv->sHwData, 0);
hal_set_accept_promiscuous(&priv->sHwData, 1);
hal_set_accept_multicast(&priv->sHwData, 1);
hal_set_accept_beacon(&priv->sHwData, 1);
hal_set_radio_mode(&priv->sHwData, 0);
return 0;
}
static int wbsoft_config_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf)
struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf)
{
printk("wbsoft_config_interface called\n");
return 0;
......@@ -169,285 +168,256 @@ static const struct ieee80211_ops wbsoft_ops = {
static void hal_led_control(unsigned long data)
{
struct wbsoft_priv *adapter = (struct wbsoft_priv *) data;
struct hw_data * pHwData = &adapter->sHwData;
struct wbsoft_priv *adapter = (struct wbsoft_priv *)data;
struct hw_data *pHwData = &adapter->sHwData;
struct wb35_reg *reg = &pHwData->reg;
u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
u32 TimeInterval = 500, ltmp, ltmp2;
ltmp=0;
u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
u8 LEDgray[20] = { 0, 3, 4, 6, 8, 10, 11, 12, 13, 14, 15, 14, 13, 12, 11, 10, 8, 6, 4, 2 };
u8 LEDgray2[30] = { 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 14, 13, 12, 11, 10, 9, 8 };
u32 TimeInterval = 500, ltmp, ltmp2;
ltmp = 0;
if( pHwData->SurpriseRemove ) return;
if (pHwData->SurpriseRemove)
return;
if( pHwData->LED_control ) {
if (pHwData->LED_control) {
ltmp2 = pHwData->LED_control & 0xff;
if( ltmp2 == 5 ) // 5 is WPS mode
if (ltmp2 == 5) // 5 is WPS mode
{
TimeInterval = 100;
ltmp2 = (pHwData->LED_control>>8) & 0xff;
switch( ltmp2 )
{
case 1: // [0.2 On][0.1 Off]...
pHwData->LED_Blinking %= 3;
ltmp = 0x1010; // Led 1 & 0 Green and Red
if( pHwData->LED_Blinking == 2 ) // Turn off
ltmp = 0;
break;
case 2: // [0.1 On][0.1 Off]...
pHwData->LED_Blinking %= 2;
ltmp = 0x0010; // Led 0 red color
if( pHwData->LED_Blinking ) // Turn off
ltmp = 0;
break;
case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
pHwData->LED_Blinking %= 15;
ltmp = 0x0010; // Led 0 red color
if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec
ltmp = 0;
break;
case 4: // [300 On][ off ]
ltmp = 0x1000; // Led 1 Green color
if( pHwData->LED_Blinking >= 3000 )
ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
break;
ltmp2 = (pHwData->LED_control >> 8) & 0xff;
switch (ltmp2) {
case 1: // [0.2 On][0.1 Off]...
pHwData->LED_Blinking %= 3;
ltmp = 0x1010; // Led 1 & 0 Green and Red
if (pHwData->LED_Blinking == 2) // Turn off
ltmp = 0;
break;
case 2: // [0.1 On][0.1 Off]...
pHwData->LED_Blinking %= 2;
ltmp = 0x0010; // Led 0 red color
if (pHwData->LED_Blinking) // Turn off
ltmp = 0;
break;
case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
pHwData->LED_Blinking %= 15;
ltmp = 0x0010; // Led 0 red color
if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2)) // Turn off 0.6 sec
ltmp = 0;
break;
case 4: // [300 On][ off ]
ltmp = 0x1000; // Led 1 Green color
if (pHwData->LED_Blinking >= 3000)
ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
break;
}
pHwData->LED_Blinking++;
reg->U1BC_LEDConfigure = ltmp;
if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
if (LEDSet != 7) // Only 111 mode has 2 LEDs on PCB.
{
reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8; // Copy LED result to each LED control register
reg->U1BC_LEDConfigure |= (ltmp & 0xff00) >> 8;
}
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
}
}
else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
} else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw) // If radio off
{
if( reg->U1BC_LEDConfigure & 0x1010 )
{
if (reg->U1BC_LEDConfigure & 0x1010) {
reg->U1BC_LEDConfigure &= ~0x1010;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
}
}
else
{
switch( LEDSet )
{
case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
if( !pHwData->LED_LinkOn ) // Blink only if not Link On
{
// Blinking if scanning is on progress
if( pHwData->LED_Scanning )
{
if( pHwData->LED_Blinking == 0 )
{
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
}
else
{
reg->U1BC_LEDConfigure &= ~0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
} else {
switch (LEDSet) {
case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
if (!pHwData->LED_LinkOn) // Blink only if not Link On
{
// Blinking if scanning is on progress
if (pHwData->LED_Scanning) {
if (pHwData->LED_Blinking == 0) {
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
} else {
reg->U1BC_LEDConfigure &= ~0x10;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
else
{
//Turn Off LED_0
if( reg->U1BC_LEDConfigure & 0x10 )
{
reg->U1BC_LEDConfigure &= ~0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
}
} else {
//Turn Off LED_0
if (reg->U1BC_LEDConfigure & 0x10) {
reg->U1BC_LEDConfigure &= ~0x10;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
}
}
else
{
// Turn On LED_0
if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
{
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
}
} else {
// Turn On LED_0
if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
}
break;
}
break;
case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
if( !pHwData->LED_LinkOn ) // Blink only if not Link On
{
// Blinking if scanning is on progress
if( pHwData->LED_Scanning )
{
if( pHwData->LED_Blinking == 0 )
{
reg->U1BC_LEDConfigure &= ~0xf;
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
}
else
{
reg->U1BC_LEDConfigure &= ~0x1f;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
}
else
{
// 20060901 Gray blinking if in disconnect state and not scanning
ltmp = reg->U1BC_LEDConfigure;
case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
if (!pHwData->LED_LinkOn) // Blink only if not Link On
{
// Blinking if scanning is on progress
if (pHwData->LED_Scanning) {
if (pHwData->LED_Blinking == 0) {
reg->U1BC_LEDConfigure &= ~0xf;
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
} else {
reg->U1BC_LEDConfigure &= ~0x1f;
if( LEDgray2[(pHwData->LED_Blinking%30)] )
{
reg->U1BC_LEDConfigure |= 0x10;
reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
}
pHwData->LED_Blinking++;
if( reg->U1BC_LEDConfigure != ltmp )
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
TimeInterval = 100;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
}
else
{
// Turn On LED_0
if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
{
} else {
// 20060901 Gray blinking if in disconnect state and not scanning
ltmp = reg->U1BC_LEDConfigure;
reg->U1BC_LEDConfigure &= ~0x1f;
if (LEDgray2[(pHwData->LED_Blinking % 30)]) {
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
reg->U1BC_LEDConfigure |=
LEDgray2[(pHwData->LED_Blinking % 30)];
}
pHwData->LED_Blinking++;
if (reg->U1BC_LEDConfigure != ltmp)
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
TimeInterval = 100;
}
break;
} else {
// Turn On LED_0
if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
}
}
break;
case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
if( !pHwData->LED_LinkOn ) // Blink only if not Link On
{
// Blinking if scanning is on progress
if( pHwData->LED_Scanning )
{
if( pHwData->LED_Blinking == 0 )
{
reg->U1BC_LEDConfigure |= 0x1000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
}
else
{
reg->U1BC_LEDConfigure &= ~0x1000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
if (!pHwData->LED_LinkOn) // Blink only if not Link On
{
// Blinking if scanning is on progress
if (pHwData->LED_Scanning) {
if (pHwData->LED_Blinking == 0) {
reg->U1BC_LEDConfigure |=
0x1000;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
} else {
reg->U1BC_LEDConfigure &=
~0x1000;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
else
{
//Turn Off LED_1
if( reg->U1BC_LEDConfigure & 0x1000 )
{
reg->U1BC_LEDConfigure &= ~0x1000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
}
} else {
//Turn Off LED_1
if (reg->U1BC_LEDConfigure & 0x1000) {
reg->U1BC_LEDConfigure &=
~0x1000;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 Off
}
}
else
{
// Is transmitting/receiving ??
if( (adapter->RxByteCount != pHwData->RxByteCountLast ) ||
(adapter->TxByteCount != pHwData->TxByteCountLast ) )
{
if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
{
reg->U1BC_LEDConfigure |= 0x3000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
}
// Update variable
pHwData->RxByteCountLast = adapter->RxByteCount;
pHwData->TxByteCountLast = adapter->TxByteCount;
TimeInterval = 200;
} else {
// Is transmitting/receiving ??
if ((adapter->RxByteCount !=
pHwData->RxByteCountLast)
|| (adapter->TxByteCount !=
pHwData->TxByteCountLast)) {
if ((reg->U1BC_LEDConfigure & 0x3000) !=
0x3000) {
reg->U1BC_LEDConfigure |=
0x3000;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
}
else
{
// Turn On LED_1 and blinking if transmitting/receiving
if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
{
reg->U1BC_LEDConfigure &= ~0x3000;
reg->U1BC_LEDConfigure |= 0x1000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
}
// Update variable
pHwData->RxByteCountLast =
adapter->RxByteCount;
pHwData->TxByteCountLast =
adapter->TxByteCount;
TimeInterval = 200;
} else {
// Turn On LED_1 and blinking if transmitting/receiving
if ((reg->U1BC_LEDConfigure & 0x3000) !=
0x1000) {
reg->U1BC_LEDConfigure &=
~0x3000;
reg->U1BC_LEDConfigure |=
0x1000;
Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
}
}
break;
}
break;
default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
{
reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
if ((reg->U1BC_LEDConfigure & 0x3000) != 0x3000) {
reg->U1BC_LEDConfigure |= 0x3000; // LED_1 is always on and event enable
Wb35Reg_Write(pHwData, 0x03bc,
reg->U1BC_LEDConfigure);
}
if( pHwData->LED_Blinking )
{
// Gray blinking
if (pHwData->LED_Blinking) {
// Gray blinking
reg->U1BC_LEDConfigure &= ~0x0f;
reg->U1BC_LEDConfigure |= 0x10;
reg->U1BC_LEDConfigure |=
LEDgray[(pHwData->LED_Blinking - 1) % 20];
Wb35Reg_Write(pHwData, 0x03bc,
reg->U1BC_LEDConfigure);
pHwData->LED_Blinking += 2;
if (pHwData->LED_Blinking < 40)
TimeInterval = 100;
else {
pHwData->LED_Blinking = 0; // Stop blinking
reg->U1BC_LEDConfigure &= ~0x0f;
reg->U1BC_LEDConfigure |= 0x10;
reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
pHwData->LED_Blinking += 2;
if( pHwData->LED_Blinking < 40 )
TimeInterval = 100;
else
{
pHwData->LED_Blinking = 0; // Stop blinking
reg->U1BC_LEDConfigure &= ~0x0f;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
break;
Wb35Reg_Write(pHwData, 0x03bc,
reg->U1BC_LEDConfigure);
}
break;
}
if( pHwData->LED_LinkOn )
if (pHwData->LED_LinkOn) {
if (!(reg->U1BC_LEDConfigure & 0x10)) // Check the LED_0
{
if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
{
//Try to turn ON LED_0 after gray blinking
reg->U1BC_LEDConfigure |= 0x10;
pHwData->LED_Blinking = 1; //Start blinking
TimeInterval = 50;
}
//Try to turn ON LED_0 after gray blinking
reg->U1BC_LEDConfigure |= 0x10;
pHwData->LED_Blinking = 1; //Start blinking
TimeInterval = 50;
}
else
} else {
if (reg->U1BC_LEDConfigure & 0x10) // Check the LED_0
{
if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
{
reg->U1BC_LEDConfigure &= ~0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
reg->U1BC_LEDConfigure &= ~0x10;
Wb35Reg_Write(pHwData, 0x03bc,
reg->U1BC_LEDConfigure);
}
break;
}
break;
}
//20060828.1 Active send null packet to avoid AP disconnect
if( pHwData->LED_LinkOn )
{
if (pHwData->LED_LinkOn) {
pHwData->NullPacketCount += TimeInterval;
if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT )
{
if (pHwData->NullPacketCount >=
DEFAULT_NULL_PACKET_COUNT) {
pHwData->NullPacketCount = 0;
}
}
}
pHwData->time_count += TimeInterval;
Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add
Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add
pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
add_timer(&pHwData->LEDTimer);
}
......@@ -455,7 +425,7 @@ static void hal_led_control(unsigned long data)
static int hal_init_hardware(struct ieee80211_hw *hw)
{
struct wbsoft_priv *priv = hw->priv;
struct hw_data * pHwData = &priv->sHwData;
struct hw_data *pHwData = &priv->sHwData;
u16 SoftwareSet;
pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME;
......@@ -472,18 +442,18 @@ static int hal_init_hardware(struct ieee80211_hw *hw)
init_timer(&pHwData->LEDTimer);
pHwData->LEDTimer.function = hal_led_control;
pHwData->LEDTimer.data = (unsigned long) priv;
pHwData->LEDTimer.data = (unsigned long)priv;
pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
add_timer(&pHwData->LEDTimer);
SoftwareSet = hal_software_set( pHwData );
SoftwareSet = hal_software_set(pHwData);
#ifdef Vendor2
#ifdef Vendor2
// Try to make sure the EEPROM contain
SoftwareSet >>= 8;
if( SoftwareSet != 0x82 )
if (SoftwareSet != 0x82)
return false;
#endif
#endif
Wb35Rx_start(hw);
Wb35Tx_EP2VM_start(priv);
......@@ -504,40 +474,41 @@ static int hal_init_hardware(struct ieee80211_hw *hw)
static int wb35_hw_init(struct ieee80211_hw *hw)
{
struct wbsoft_priv *priv = hw->priv;
struct hw_data * pHwData = &priv->sHwData;
u8 *pMacAddr;
u8 *pMacAddr2;
u8 EEPROM_region;
u8 HwRadioOff;
struct hw_data *pHwData = &priv->sHwData;
u8 EEPROM_region;
u8 HwRadioOff;
u8 *pMacAddr2;
u8 *pMacAddr;
int err;
priv->sLocalPara.region_INF = REGION_AUTO;
priv->sLocalPara.TxRateMode = RATE_AUTO;
priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;
priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
priv->sLocalPara.bPreambleMode = AUTO_MODE;
priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
pHwData->phy_type = RF_DECIDE_BY_INF;
priv->sLocalPara.bWepKeyError= false;
priv->sLocalPara.bToSelfPacketReceived = false;
priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /* 2 seconds */
priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
priv->sLocalPara.region_INF = REGION_AUTO;
priv->sLocalPara.TxRateMode = RATE_AUTO;
priv->sLocalPara.bMacOperationMode = MODE_802_11_BG;
priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
priv->sLocalPara.bPreambleMode = AUTO_MODE;
priv->sLocalPara.bWepKeyError = false;
priv->sLocalPara.bToSelfPacketReceived = false;
priv->sLocalPara.WepKeyDetectTimerCount = 2 * 100; /* 2 seconds */
priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
err = hal_init_hardware(hw);
if (err)
goto error;
EEPROM_region = hal_get_region_from_EEPROM( pHwData );
EEPROM_region = hal_get_region_from_EEPROM(pHwData);
if (EEPROM_region != REGION_AUTO)
priv->sLocalPara.region = EEPROM_region;
else {
if (priv->sLocalPara.region_INF != REGION_AUTO)
priv->sLocalPara.region = priv->sLocalPara.region_INF;
else
priv->sLocalPara.region = REGION_USA; /* default setting */
priv->sLocalPara.region = REGION_USA; /* default setting */
}
// Get Software setting flag from hal
......@@ -555,19 +526,20 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
pMacAddr2 = priv->sLocalPara.PermanentAddress;
/* Reading ethernet address from EEPROM */
hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );
hal_get_permanent_address(pHwData, priv->sLocalPara.PermanentAddress);
if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
else {
/* Set the user define MAC address */
hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
hal_set_ethernet_address(pHwData,
priv->sLocalPara.ThisMacAddress);
}
priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
#ifdef _PE_STATE_DUMP_
printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
#endif
hal_get_hw_radio_off( pHwData );
hal_get_hw_radio_off(pHwData);
/* Waiting for HAL setting OK */
while (!hal_idle(pHwData))
......@@ -575,10 +547,14 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
MTO_Init(priv);
HwRadioOff = hal_get_hw_radio_off( pHwData );
HwRadioOff = hal_get_hw_radio_off(pHwData);
priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;
hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );
hal_set_radio_mode(pHwData,
(unsigned char)(priv->sLocalPara.RadioOffStatus.
boSwRadioOff
|| priv->sLocalPara.RadioOffStatus.
boHwRadioOff));
/* Notify hal that the driver is ready now. */
hal_driver_init_OK(pHwData) = 1;
......@@ -587,23 +563,25 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
return err;
}
static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
static int wb35_probe(struct usb_interface *intf,
const struct usb_device_id *id_table)
{
struct wb_usb *pWbUsb;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
u32 ltmp;
struct usb_device *udev = interface_to_usbdev(intf);
struct wbsoft_priv *priv;
struct usb_endpoint_descriptor *endpoint;
struct usb_host_interface *interface;
struct ieee80211_hw *dev;
struct wbsoft_priv *priv;
struct wb_usb *pWbUsb;
int nr, err;
u32 ltmp;
usb_get_dev(udev);
/* Check the device if it already be opened */
nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
0x0, 0x400, &ltmp, 4, HZ*100 );
nr = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x01,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x0, 0x400, &ltmp, 4, HZ * 100);
if (nr < 0) {
err = nr;
goto error;
......@@ -629,8 +607,8 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
pWbUsb = &priv->sHwData.WbUsb;
pWbUsb->udev = udev;
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
if (endpoint[2].wMaxPacketSize == 512) {
printk("[w35und] Working on USB 2.0\n");
......@@ -643,8 +621,8 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
SET_IEEE80211_DEV(dev, &udev->dev);
{
struct hw_data * pHwData = &priv->sHwData;
unsigned char dev_addr[MAX_ADDR_LEN];
struct hw_data *pHwData = &priv->sHwData;
unsigned char dev_addr[MAX_ADDR_LEN];
hal_get_permanent_address(pHwData, dev_addr);
SET_IEEE80211_PERM_ADDR(dev, dev_addr);
}
......@@ -686,10 +664,10 @@ static void hal_halt(struct hw_data *pHwData)
static void wb35_hw_halt(struct wbsoft_priv *adapter)
{
Mds_Destroy( adapter );
Mds_Destroy(adapter);
/* Turn off Rx and Tx hardware ability */
hal_stop( &adapter->sHwData );
hal_stop(&adapter->sHwData);
#ifdef _PE_USB_INI_DUMP_
printk("[w35und] Hal_stop O.K.\n");
#endif
......@@ -699,7 +677,6 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
hal_halt(&adapter->sHwData);
}
static void wb35_disconnect(struct usb_interface *intf)
{
struct ieee80211_hw *hw = usb_get_intfdata(intf);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7