Commit a3cd42a9 authored by Chad Dupuis's avatar Chad Dupuis Committed by Martin K. Petersen

scsi: qedf: Use granted MAC from the FCF for the FCoE source address if it is available.

Currently in the driver we've been using the fc_fcoe_set_mac() function to
set the source MAC for FCoE traffic.  This works well in most cases as it
uses the spec. default FCF-MAC.  However, if the administrator changes the
FCF-MAC switch, then any FCoE traffic we send will be dropped by the
switch.

Instead we should check the granted MAC from the FLOGI payload and use that
address if it is present.  Otherwise, fall back to using the the default
FCF-MAC and the fabric ID of the port as the FCoE MAC address.

Once this address is known we need to set it when doing non-offload
traffic, offload traffic and setting the data_src_address libfcoe uses for
FIP keep alive messages.
Signed-off-by: default avatarChad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 01fd76a7
...@@ -443,7 +443,6 @@ extern void qedf_cmd_mgr_free(struct qedf_cmd_mgr *cmgr); ...@@ -443,7 +443,6 @@ extern void qedf_cmd_mgr_free(struct qedf_cmd_mgr *cmgr);
extern int qedf_queuecommand(struct Scsi_Host *host, extern int qedf_queuecommand(struct Scsi_Host *host,
struct scsi_cmnd *sc_cmd); struct scsi_cmnd *sc_cmd);
extern void qedf_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb); extern void qedf_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb);
extern void qedf_update_src_mac(struct fc_lport *lport, u8 *addr);
extern u8 *qedf_get_src_mac(struct fc_lport *lport); extern u8 *qedf_get_src_mac(struct fc_lport *lport);
extern void qedf_fip_recv(struct qedf_ctx *qedf, struct sk_buff *skb); extern void qedf_fip_recv(struct qedf_ctx *qedf, struct sk_buff *skb);
extern void qedf_fcoe_send_vlan_req(struct qedf_ctx *qedf); extern void qedf_fcoe_send_vlan_req(struct qedf_ctx *qedf);
......
...@@ -242,26 +242,9 @@ void qedf_fip_recv(struct qedf_ctx *qedf, struct sk_buff *skb) ...@@ -242,26 +242,9 @@ void qedf_fip_recv(struct qedf_ctx *qedf, struct sk_buff *skb)
} }
} }
void qedf_update_src_mac(struct fc_lport *lport, u8 *addr)
{
struct qedf_ctx *qedf = lport_priv(lport);
QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
"Setting data_src_addr=%pM.\n", addr);
ether_addr_copy(qedf->data_src_addr, addr);
}
u8 *qedf_get_src_mac(struct fc_lport *lport) u8 *qedf_get_src_mac(struct fc_lport *lport)
{ {
u8 mac[ETH_ALEN];
u8 port_id[3];
struct qedf_ctx *qedf = lport_priv(lport); struct qedf_ctx *qedf = lport_priv(lport);
/* We need to use the lport port_id to create the data_src_addr */
if (is_zero_ether_addr(qedf->data_src_addr)) {
hton24(port_id, lport->port_id);
fc_fcoe_set_mac(mac, port_id);
qedf->ctlr.update_mac(lport, mac);
}
return qedf->data_src_addr; return qedf->data_src_addr;
} }
...@@ -18,6 +18,7 @@ ...@@ -18,6 +18,7 @@
#include <linux/kthread.h> #include <linux/kthread.h>
#include <scsi/libfc.h> #include <scsi/libfc.h>
#include <scsi/scsi_host.h> #include <scsi/scsi_host.h>
#include <scsi/fc_frame.h>
#include <linux/if_ether.h> #include <linux/if_ether.h>
#include <linux/if_vlan.h> #include <linux/if_vlan.h>
#include <linux/cpu.h> #include <linux/cpu.h>
...@@ -187,6 +188,50 @@ static void qedf_handle_link_update(struct work_struct *work) ...@@ -187,6 +188,50 @@ static void qedf_handle_link_update(struct work_struct *work)
} }
} }
#define QEDF_FCOE_MAC_METHOD_GRANGED_MAC 1
#define QEDF_FCOE_MAC_METHOD_FCF_MAP 2
#define QEDF_FCOE_MAC_METHOD_FCOE_SET_MAC 3
static void qedf_set_data_src_addr(struct qedf_ctx *qedf, struct fc_frame *fp)
{
u8 *granted_mac;
struct fc_frame_header *fh = fc_frame_header_get(fp);
u8 fc_map[3];
int method = 0;
/* Get granted MAC address from FIP FLOGI payload */
granted_mac = fr_cb(fp)->granted_mac;
/*
* We set the source MAC for FCoE traffic based on the Granted MAC
* address from the switch.
*
* If granted_mac is non-zero, we used that.
* If the granted_mac is zeroed out, created the FCoE MAC based on
* the sel_fcf->fc_map and the d_id fo the FLOGI frame.
* If sel_fcf->fc_map is 0 then we use the default FCF-MAC plus the
* d_id of the FLOGI frame.
*/
if (!is_zero_ether_addr(granted_mac)) {
ether_addr_copy(qedf->data_src_addr, granted_mac);
method = QEDF_FCOE_MAC_METHOD_GRANGED_MAC;
} else if (qedf->ctlr.sel_fcf->fc_map != 0) {
hton24(fc_map, qedf->ctlr.sel_fcf->fc_map);
qedf->data_src_addr[0] = fc_map[0];
qedf->data_src_addr[1] = fc_map[1];
qedf->data_src_addr[2] = fc_map[2];
qedf->data_src_addr[3] = fh->fh_d_id[0];
qedf->data_src_addr[4] = fh->fh_d_id[1];
qedf->data_src_addr[5] = fh->fh_d_id[2];
method = QEDF_FCOE_MAC_METHOD_FCF_MAP;
} else {
fc_fcoe_set_mac(qedf->data_src_addr, fh->fh_d_id);
method = QEDF_FCOE_MAC_METHOD_FCOE_SET_MAC;
}
QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
"QEDF data_src_mac=%pM method=%d.\n", qedf->data_src_addr, method);
}
static void qedf_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, static void qedf_flogi_resp(struct fc_seq *seq, struct fc_frame *fp,
void *arg) void *arg)
{ {
...@@ -212,6 +257,10 @@ static void qedf_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, ...@@ -212,6 +257,10 @@ static void qedf_flogi_resp(struct fc_seq *seq, struct fc_frame *fp,
/* Log stats for FLOGI reject */ /* Log stats for FLOGI reject */
if (fc_frame_payload_op(fp) == ELS_LS_RJT) if (fc_frame_payload_op(fp) == ELS_LS_RJT)
qedf->flogi_failed++; qedf->flogi_failed++;
else if (fc_frame_payload_op(fp) == ELS_LS_ACC) {
/* Set the source MAC we will use for FCoE traffic */
qedf_set_data_src_addr(qedf, fp);
}
/* Complete flogi_compl so we can proceed to sending ADISCs */ /* Complete flogi_compl so we can proceed to sending ADISCs */
complete(&qedf->flogi_compl); complete(&qedf->flogi_compl);
...@@ -927,7 +976,7 @@ static int qedf_xmit(struct fc_lport *lport, struct fc_frame *fp) ...@@ -927,7 +976,7 @@ static int qedf_xmit(struct fc_lport *lport, struct fc_frame *fp)
ether_addr_copy(eh->h_dest, qedf->ctlr.dest_addr); ether_addr_copy(eh->h_dest, qedf->ctlr.dest_addr);
/* Set the source MAC address */ /* Set the source MAC address */
fc_fcoe_set_mac(eh->h_source, fh->fh_s_id); ether_addr_copy(eh->h_source, qedf->data_src_addr);
hp = (struct fcoe_hdr *)(eh + 1); hp = (struct fcoe_hdr *)(eh + 1);
memset(hp, 0, sizeof(*hp)); memset(hp, 0, sizeof(*hp));
...@@ -1025,7 +1074,6 @@ static int qedf_offload_connection(struct qedf_ctx *qedf, ...@@ -1025,7 +1074,6 @@ static int qedf_offload_connection(struct qedf_ctx *qedf,
{ {
struct qed_fcoe_params_offload conn_info; struct qed_fcoe_params_offload conn_info;
u32 port_id; u32 port_id;
u8 lport_src_id[3];
int rval; int rval;
uint16_t total_sqe = (fcport->sq_mem_size / sizeof(struct fcoe_wqe)); uint16_t total_sqe = (fcport->sq_mem_size / sizeof(struct fcoe_wqe));
...@@ -1054,11 +1102,7 @@ static int qedf_offload_connection(struct qedf_ctx *qedf, ...@@ -1054,11 +1102,7 @@ static int qedf_offload_connection(struct qedf_ctx *qedf,
(dma_addr_t)(*(u64 *)(fcport->sq_pbl + 8)); (dma_addr_t)(*(u64 *)(fcport->sq_pbl + 8));
/* Need to use our FCoE MAC for the offload session */ /* Need to use our FCoE MAC for the offload session */
port_id = fc_host_port_id(qedf->lport->host); ether_addr_copy(conn_info.src_mac, qedf->data_src_addr);
lport_src_id[2] = (port_id & 0x000000FF);
lport_src_id[1] = (port_id & 0x0000FF00) >> 8;
lport_src_id[0] = (port_id & 0x00FF0000) >> 16;
fc_fcoe_set_mac(conn_info.src_mac, lport_src_id);
ether_addr_copy(conn_info.dst_mac, qedf->ctlr.dest_addr); ether_addr_copy(conn_info.dst_mac, qedf->ctlr.dest_addr);
...@@ -1347,7 +1391,6 @@ static void qedf_fcoe_ctlr_setup(struct qedf_ctx *qedf) ...@@ -1347,7 +1391,6 @@ static void qedf_fcoe_ctlr_setup(struct qedf_ctx *qedf)
fcoe_ctlr_init(&qedf->ctlr, FIP_ST_AUTO); fcoe_ctlr_init(&qedf->ctlr, FIP_ST_AUTO);
qedf->ctlr.send = qedf_fip_send; qedf->ctlr.send = qedf_fip_send;
qedf->ctlr.update_mac = qedf_update_src_mac;
qedf->ctlr.get_src_addr = qedf_get_src_mac; qedf->ctlr.get_src_addr = qedf_get_src_mac;
ether_addr_copy(qedf->ctlr.ctl_src_addr, qedf->mac); ether_addr_copy(qedf->ctlr.ctl_src_addr, qedf->mac);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment